Cationic disulfide-functionalized worm gels.

The recent development of polymerization-induced self-assembly (PISA) has facilitated the rational synthesis of a range of diblock copolymer worms, which hitherto could only be prepared via traditional post-polymerization processing in dilute solution. Herein we explore a new synthetic route to aqueous dispersions of cationic disulfide-functionalized worm gels. This is achieved via the PISA synthesis of poly[(glycerol monomethacrylate-stat-glycidyl methacrylate)]-block-poly(2-hydroxypropyl methacrylate) (P(GMA-stat-GlyMA)-PHPMA) block copolymer worms via reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization of HPMA. A water-soluble reagent, cystamine, is then reacted with the pendent epoxy groups located within the P(GMA-stat-GlyMA) stabilizer chains to introduce disulfide functionality, while simultaneously conferring cationic character via formation of secondary amine groups. Moreover, systematic variation of the cystamine/epoxy molar ratio enables either chemically cross-linked worm gels or physical (linear) primary amine-functionalized disulfide-based worm gels to be obtained. These new worm gels were characterized using gel permeation chromatography, 1H NMR spectroscopy, transmission electron microscopy, dynamic light scattering, aqueous electrophoresis and rheology. In principle, such hydrogels may offer enhanced mucoadhesive properties.

A Robust Cross-Linking Strategy for Block Copolymer Worms Prepared via Polymerization-Induced Self-Assembly.

A poly(glycerol monomethacrylate) (PGMA) chain transfer agent is chain-extended by reversible addition-fragmentation chain transfer (RAFT) statistical copolymerization of 2-hydroxypropyl methacrylate (HPMA) with glycidyl methacrylate (GlyMA) in concentrated aqueous solution via polymerization-induced self-assembly (PISA). A series of five free-standing worm gels is prepared by fixing the overall degree of polymerization of the core-forming block at 144 while varying its GlyMA content from 0 to 20 mol %. 1H NMR kinetics indicated that GlyMA is consumed much faster than HPMA, producing a GlyMA-rich sequence close to the PGMA stabilizer block. Temperature-dependent oscillatory rheological studies indicate that increasing the GlyMA content leads to progressively less thermoresponsive worm gels, with no degelation on cooling being observed for worms containing 20 mol % GlyMA. The epoxy groups in the GlyMA residues can be ring-opened using 3-aminopropyltriethoxysilane (APTES) in order to prepare core cross-linked worms via hydrolysis-condensation with the siloxane groups and/or hydroxyl groups on the HPMA residues. Perhaps surprisingly, 1H NMR analysis indicates that the epoxy-amine reaction and the intermolecular cross-linking occur on similar time scales. Cross-linking leads to stiffer worm gels that do not undergo degelation upon cooling. Dynamic light scattering studies and TEM analyses conducted on linear worms exposed to either methanol (a good solvent for both blocks) or anionic surfactant result in immediate worm dissociation. In contrast, cross-linked worms remain intact under such conditions, provided that the worm cores comprise at least 10 mol % GlyMA.

Framboidal ABC triblock copolymer vesicles: a new class of efficient Pickering emulsifier.

Pickering emulsions offer important advantages over conventional surfactant-stabilized emulsions, including enhanced long-term stability, more reproducible formulations and reduced foaming problems. The recent development of polymerization-induced self-assembly (PISA) offers considerable scope for the design of a wide range of block copolymer nanoparticles with tunable surface wettability that may serve as bespoke Pickering emulsifiers. In the present study, we exploit PISA to design a series of model framboidal ABC triblock copolymer vesicles with exquisite control over surface roughness. Transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) were utilized to characterize these nanoparticles, which were subsequently used to stabilize n-dodecane emulsion droplets in water. The adsorption efficiency, Aeff, of the nanoparticles at the n-dodecane/water interface was determined as a function of increasing vesicle surface roughness using a turbidimetry assay. A strong correlation between surface roughness and Aeff was observed, with Aeff increasing from 36% up to 94%. This is a significant improvement in Pickering emulsifier efficiency compared to that reported previously for similar vesicles with smooth surfaces. In summary, nanoparticles with appreciable surface roughness are much more effective Pickering emulsifiers and this parameter can be readily fine-tuned using a highly efficient PISA formulation.

Are block copolymer worms more effective Pickering emulsifiers than block copolymer spheres?

RAFT-mediated polymerisation-induced self-assembly (PISA) is used to prepare six types of amphiphilic block copolymer nanoparticles which were subsequently evaluated as putative Pickering emulsifiers for the stabilisation of n-dodecane-in-water emulsions. It was found that linear poly(glycerol monomethacrylate)-poly(2-hydroxypropyl methacrylate) (PGMA-PHPMA) diblock copolymer spheres and worms do not survive the high shear homogenisation conditions used for emulsification. Stable emulsions are obtained, but the copolymer acts as a polymeric surfactant; individual chains rather than particles are adsorbed at the oil-water interface. Particle dissociation during emulsification is attributed to the weakly hydrophobic character of the PHPMA block. Covalent stabilisation of these copolymer spheres or worms can be readily achieved by addition of ethylene glycol dimethacrylate (EGDMA) during the PISA synthesis. TEM studies confirm that the resulting cross-linked spherical or worm-like nanoparticles survive emulsification and produce genuine Pickering emulsions. Alternatively, stabilisation can be achieved by either replacing or supplementing the PHPMA block with the more hydrophobic poly(benzyl methacrylate) (PBzMA). The resulting linear spheres or worms also survive emulsification and produce stable n-dodecane-in-water Pickering emulsions. The intrinsic advantages of anisotropic worms over isotropic spheres for the preparation of Pickering emulsions are highlighted. The former particles are more strongly adsorbed at similar efficiencies compared to spheres and also enable smaller oil droplets to be produced for a given copolymer concentration. The scalable nature of PISA formulations augurs well for potential applications of anisotropic block copolymer nanoparticles as Pickering emulsifiers.

The role of airway epithelium in replenishment of evaporated airway surface liquid from the human conducting airways.

This article presents a multi-scale computational model describing the transport of water vapor and heat within the human conducting airways and its interaction with cellular fluid transport kinetics. This tight coupling between the cell and the evaporative flux allows the periciliary liquid (PCL) depth to be investigated within the context of a geometric framework of the human conducting airways with spatial and temporal variations. Within the in vivo airway, the epithelium is not the only source of fluid available for hydration of the PCL, and fluid may also be supplied from submucosal glands (SMGs) or via axial transport of the PCL. The model predicts that without fluid supplied by either SMGs or via PCL transport, significant dehydration would occur under normal breathing conditions. Previous studies have suggested that PCL transport from the periphery to the trachea would require absorption of the fluid by the epithelium; here we show that this can theoretically be sustained by the evaporative load under normal breathing conditions. SMGs could also provide a significant supply of fluid for airway hydration, a hypothesis which is corroborated by comparing the distribution of SMGs as a function of airway generation with the distribution of airway evaporative flux.

The effect of intracellular calcium oscillations on fluid secretion in airway epithelium.

Airway epithelium has been shown to elicit fluid secretion after a rise in intracellular calcium. This rise in intracellular calcium has been shown to display complex oscillations in many species after the binding of particular agonists to extracellular receptors. Fluid secreted by the airway epithelium is used to maintain the depth of the periciliary liquid (PCL) above the apical membrane of the epithelial cells lining the bronchial airways. Previous mathematical models have been published which separately consider the electrophysiology involved in regulating periciliary liquid depth, and the transmission of intracellular calcium waves in airway epithelial tissue. In this paper we present a mathematical model that combines these previous models and allows the effect of oscillations in intracellular calcium on fluid secretion by airway epithelial cells to be investigated. We show that an oscillatory calcium response produces different fluid secretion properties to that elicited by a tonic rise in intracellular calcium. These differences are shown to be due to saturation of the Ca(2+) activated ion channels.

Mathematical modelling of calcium wave propagation in mammalian airway epithelium: evidence for regenerative ATP release.

Airway epithelium has been shown to exhibit intracellular calcium waves after mechanical stimulation. Two classes of mechanism have been proposed to explain calcium wave propagation: diffusion through gap junctions of the intracellular messenger inositol 1,4,5-trisphosphate (IP3), and diffusion of paracrine extracellular messengers such as ATP. We have used single cell recordings of airway epithelium to parameterize a model of an airway epithelial cell. This was then incorporated into a spatial model of a cell culture where both mechanisms for calcium wave propagation are possible. It is shown that a decreasing return on the radius of Ca2+ wave propagation is achieved as the amount of ATP released from the stimulated cell increases. It is therefore shown that for a Ca2+ wave to propagate large distances, a significant fraction of the intracellular ATP pool would be required to be released. Further to this, the radial distribution of maximal calcium response from the stimulated cell does not produce the same flat profile of maximal calcium response seen in experiential studies. This suggests that an additional mechanism is important in Ca2+ wave propagation, such as regenerative release of ATP from cells downstream of the stimulated cell.

A mathematical model of calcium-induced fluid secretion in airway epithelium.

Regulation of periciliary liquid (PCL) depth is of central importance to mucociliary clearance by the airway epithelium. Without adequate hydration mucociliary transport would cease, leading to build up of mucus in the airways, and impairing the clearance of any trapped inhaled particulates. Airway epithelial cells are known to release ATP under a number of stress conditions. Cell surface receptors bind ATP and trigger an intracellular calcium response which regulates the gating of specific ion channels on the apical and basolateral cell membranes. This shifts the electrochemical balance, resulting in the accumulation of Na(+) and Cl(-) in the periciliary liquid, and providing an osmotic driving force for water flux. In this study, we present a mathematical model of a single airway epithelial cell which describes the fluid secretion elicited after a rise in intracellular calcium. The model provides a basis to quantitatively analyse the influence of intracellular calcium signalling on fluid movement. The model demonstrates behaviour consistent with a number of experimental data on manipulating periciliary liquid volume and tonicity, and provides a quantitative basis for analysing the role of the different membrane ion channels in determining water flux following different physiological stimuli.

Towards a virtual lung: multi-scale, multi-physics modelling of the pulmonary system.

The essential function of the lung, gas exchange, is dependent on adequate matching of ventilation and perfusion, where air and blood are delivered through complex branching systems exposed to regionally varying transpulmonary and transmural pressures. Structure and function in the lung are intimately related, yet computational models in pulmonary physiology usually simplify or neglect structure. The geometries of the airway and vascular systems and their interaction with parenchymal tissue have an important bearing on regional distributions of air and blood, and therefore on whole lung gas exchange, but this has not yet been addressed by modelling studies. Models for gas exchange have typically incorporated considerable detail at the level of chemical reactions, with little thought for the influence of structure. To date, relatively little attention has been paid to modelling at the cellular or subcellular level in the lung, or to linking information from the protein structure/interaction and cellular levels to the operation of the whole lung. We review previous work in developing anatomically based models of the lung, airways, parenchyma and pulmonary vasculature, and some functional studies in which these models have been used. Models for gas exchange at several spatial scales are briefly reviewed, and the challenges and benefits from modelling cellular function in the lung are discussed.