Influence of FcγRIIa-Expressing Cells on the Assessment of Neutralizing and Enhancing Serum Antibodies Elicited by a Live-Attenuated Tetravalent Dengue Vaccine.

Background. Recent trials of recombinant, live-attenuated chimeric yellow fever-dengue tetravalent dengue vaccine (CYD-TDV) demonstrated efficacy against symptomatic, virologically confirmed dengue disease with higher point estimates of efficacy toward dengue virus (DENV)3 and DENV4 and moderate levels toward DENV1 and DENV2. It is interesting to note that serotype-specific efficacy did not correlate with absolute neutralizing antibody (nAb) geometric mean titer (GMT) values measured in a Vero-based plaque reduction neutralization test assay. The absence of Fcγ receptors on Vero cells may explain this observation. Methods. We performed parallel seroneutralization assays in Vero cells and CV-1 cells that express FcγRIIa (CV-1-Fc) to determine the neutralizing and enhancing capacity of serotype-specific DENV Abs present in CYD-TDV clinical trial sera. Results. Enhancement of DENV infection was observed in CV-1-Fc cells in naturally exposed nonvaccine sera, mostly for DENV3 and DENV4, at high dilutions. The CYD-TDV-vaccinated sera showed similar enhancement patterns. The CV-1-Fc nAb GMT values were 2- to 9-fold lower than Vero for all serotypes in both naturally infected individuals and CYD-TDV-vaccinated subjects with and without previous dengue immunity. The relative (CV-1-Fc/Vero) GMT decrease for anti-DENV1 and anti-DENV2 responses was not greater than for the other serotypes. Conclusions. In vitro neutralization assays utilizing FcγRIIa-expressing cells provide evidence that serotype-specific Ab enhancement may not be a primary factor in the serotype-specific efficacy differences exhibited in the CYD-TDV trials.

Evaluation of Immunostimulatory Potential of Branded and US-Generic Enoxaparins in an In Vitro Human Immune System Model.

Low-molecular-weight heparins (LMWHs) have several positive therapeutic effects and can also form immunostimulatory complexes with plasma proteins, such as platelet factor 4 (PF4). We compared the innate response and functional profiles of branded and US-generic enoxaparins from 2 manufacturers in either native or PF4-bound forms in an in vitro model of human immunity. In an analysis of 2 product lots from each manufacturer and multiple separate batches of protein-heparin complexes, branded enoxaparin was shown to be consistently nonstimulatory for innate responses, whereas US-generic enoxaparins generated variable immunostimulatory profiles depending on the enoxaparin lot used to prepare the PF4-LMWH complexes. Production of tissue factor pathway inhibitor (TFPI), a physiologic heparin-induced inhibitor of tissue factor-induced coagulation that was used as a functional readout of biological activity of enoxaparins in these assays, was heightened in the presence of branded enoxaparin complexes, but its levels were variable in cultures treated with complexes containing US-generic enoxaparins. Analytical analyses suggest that the heightened immunostimulatory potential of some of the US-generic enoxaparin product lots could be tied to their capacity to form ultra-large and/or more stable complexes with PF4 than the other LMWHs included in this study. Although these distinct biological and analytical profiles might be related to the composition and/or consistency of branded and US-generic enoxaparins included in our data set, further studies are warranted to elucidate the pathophysiological relevance of these in vitro findings.

Immunomodulation and T helper TH1/TH2 response polarization by CeO2 and TiO2 nanoparticles.

Immunomodulation by nanoparticles, especially as related to the biochemical properties of these unique materials, has scarcely been explored. In an in vitro model of human immunity, we demonstrate two catalytic nanoparticles, TiO2 (oxidant) and CeO2 (antioxidant), have nearly opposite effects on human dendritic cells and T helper (T(H)) cells. For example, whereas TiO2 nanoparticles potentiated DC maturation that led towards T(H)1-biased responses, treatment with antioxidant CeO2 nanoparticles induced APCs to secrete the anti-inflammatory cytokine, IL-10, and induce a T(H)2-dominated T cell profile. In subsequent studies, we demonstrate these results are likely explained by the disparate capacities of the nanoparticles to modulate ROS, since TiO2, but not CeO2 NPs, induced inflammatory responses through an ROS/inflammasome/IL-1ß pathway. This novel capacity of metallic NPs to regulate innate and adaptive immunity in profoundly different directions via their ability to modulate dendritic cell function has strong implications for human health since unintentional exposure to these materials is common in modern societies.

Human granuloma in vitro model, for TB dormancy and resuscitation.

Tuberculosis (TB) is responsible for death of nearly two million people in the world annually. Upon infection, Mycobacterium tuberculosis (Mtb) causes formation of granuloma where the pathogen goes into dormant state and can live for decades before resuscitation to develop active disease when the immune system of the host is weakened and/or suppressed. In an attempt to better understand host-pathogen interactions, several groups have been developing in vitro models of human tuberculosis granuloma. However, to date, an in vitro granuloma model in which Mtb goes into dormancy and can subsequently resuscitate under conditions that mimic weakening of the immune system has not been reported. We describe the development of a biomimetic in vitro model of human tuberculosis granuloma using human primary leukocytes, in which the Mtb exhibited characteristics of dormant mycobacteria as demonstrated by (1) loss of acid-fastness, (2) accumulation of lipid bodies (3) development of rifampicin-tolerance and (4) gene expression changes. Further, when these micro granulomas were treated with immunosuppressant anti-tumor necrosis factor-alpha monoclonal antibodies (anti-TNFα mAbs), resuscitation of Mtb was observed as has been found in humans. In this human in vitro granuloma model triacylglycerol synthase 1deletion mutant (Δtgs1) with impaired ability to accumulate triacylglycerides (TG), but not the complemented mutant, could not go into dormancy. Deletion mutant of lipY, with compromised ability to mobilize the stored TG, but not the complemented mutant, was unable to come out of dormancy upon treatment with anti-TNFα mAbs. In conclusion, we have developed an in vitro human tuberculosis granuloma model that largely exhibits functional features of dormancy and resuscitation observed in human tuberculosis.

Coupling sensitive in vitro and in silico techniques to assess cross-reactive CD4(+) T cells against the swine-origin H1N1 influenza virus.

The outbreak of the novel swine-origin H1N1 influenza in the spring of 2009 took epidemiologists, immunologists, and vaccinologists by surprise and galvanized a massive worldwide effort to produce millions of vaccine doses to protect against this single virus strain. Of particular concern was the apparent lack of pre-existing antibody capable of eliciting cross-protective immunity against this novel virus, which fueled fears this strain would trigger a particularly far-reaching and lethal pandemic. Given that disease caused by the swine-origin virus was far less severe than expected, we hypothesized cellular immunity to cross-conserved T cell epitopes might have played a significant role in protecting against the pandemic H1N1 in the absence of cross-reactive humoral immunity. In a published study, we used an immunoinformatics approach to predict a number of CD4(+) T cell epitopes are conserved between the 2008-2009 seasonal H1N1 vaccine strain and pandemic H1N1 (A/California/04/2009) hemagglutinin proteins. Here, we provide results from biological studies using PBMCs from human donors not exposed to the pandemic virus to demonstrate that pre-existing CD4(+) T cells can elicit cross-reactive effector responses against the pandemic H1N1 virus. As well, we show our computational tools were 80-90% accurate in predicting CD4(+) T cell epitopes and their HLA-DRB1-dependent response profiles in donors that were chosen at random for HLA haplotype. Combined, these results confirm the power of coupling immunoinformatics to define broadly reactive CD4(+) T cell epitopes with highly sensitive in vitro biological assays to verify these in silico predictions as a means to understand human cellular immunity, including cross-protective responses, and to define CD4(+) T cell epitopes for potential vaccination efforts against future influenza viruses and other pathogens.

Assessing the immunopotency of Toll-like receptor agonists in an in vitro tissue-engineered immunological model.

SUMMARY: The in vitro Peripheral Tissue Equivalent (PTE) module is a three-dimensional tissue-engineered endothelial cell/collagen matrix culture system, which has been reported to reproduce in vivo physiological conditions and which generates dendritic cells (DC) autonomously. In the present study, we used the PTE module to investigate the immunopotency of Toll-like receptor (TLR) agonists, including polyinosine-polycytidylic acid, Gardiquimod, CpG 2006 and lipopolysaccharide. Application of TLR agonists in the PTE module induced a wide range of cytokines, including interleukins 1alpha/beta, 6, 8 and 10 and tumour necrosis factor-alpha. Compared with traditional peripheral blood mononuclear cell (PBMC) cultures, the PTE module produced twofold to 100-fold higher levels of cytokine secretion, indicating that it can be a highly sensitive assay system. This increased sensitivity is the result of the natural synergy between the leucocytes and the endothelium. Furthermore, the application of TLR agonists, such as lipopolysaccharide and Gardiquimod, to the PTE module enhanced DC differentiation and promoted DC maturation, as indicated by up-regulated expression of CD83, CD86 and CCR7(CD197). In addition, functional assays indicated PTE-derived DC treated with Gardiquimod, a TLR-7 agonist, significantly augmented anti-tetanus toxoid antibody production. Interestingly, replacing PBMC with purified myeloid cells (CD33(+)) significantly reduced the responsiveness of the PTE module to TLR stimulation. The reduced sensitivity was partly the result of the removal of plasmacytoid DC that participated in the response to TLR stimulation and sensitization of the PTE module. Overall, the in vitro PTE module clearly demonstrated the effects of TLR agonists on DC generation, maturation and antigen-presenting capacity, and may serve as a sensitive and predictive test bed for the evaluation of adjuvant candidates.

Exposure to titanium dioxide nanomaterials provokes inflammation of an in vitro human immune construct.

Nanoparticle technology is undergoing significant expansion largely because of the potential of nanoparticles as biomaterials, drug delivery vehicles, cancer therapeutics, and immunopotentiators. Incorporation of nanoparticle technologies for in vivo applications increases the urgency to characterize nanomaterial immunogenicity. This study explores titanium dioxide, one of the most widely manufactured nanomaterials, synthesized into its three most common nanoarchitectures: anatase (7-10 nm), rutile (15-20 nm), and nanotube (10-15 nm diameters, 70-150 nm length). The fully human autologous MIMIC immunological construct has been utilized as a predictive, nonanimal alternative to diagnose nanoparticle immunogenicity. Cumulatively, treatment with titanium dioxide nanoparticles in the MIMIC system led to elevated levels of proinflammatory cytokines and increased maturation and expression of costimulatory molecules on dendritic cells. Additionally, these treatments effectively primed activation and proliferation of naive CD4(+) T cells in comparison to dendritic cells treated with micrometer-sized (>1 microm) titanium dioxide, characteristic of an in vivo inflammatory response.

Collaborative engineering: 3-D optical imaging and gas exchange simulation of in-vitro alveolar constructs.

This paper reports on the computational simulation and modeling of an in vitro alveolar construct system along the optical coherence microscopy (OCM) methods for visualizing engineered tissue. The optical imaging methods will be compared to immunohistochemical light microscopy samples of engineered alveolar constructs. Results show depth images of the alveolar tissue construct for a bilayer construct, as well as predictions of the gas exchange process in a simple model of a bio-reactor hosting the construct.

Characterizing environmental factors that impact the viability of tissue-engineered constructs fabricated by a direct-write bioassembly tool.

Tissue engineering combines the fields of medicine and engineering to build replacement tissue capable of restoring, maintaining, or improving damaged tissue. Researchers have recently developed techniques to fabricate tissue in which both the cells and matrix have a carefully defined architecture. This report details studies evaluating the use of a direct-write, 3-dimensional (3D) bioassembly tool (BAT) capable of extruding cells and matrix into spatially organized, 3D constructs. This system has been characterized by its ability to fabricate viable 2-dimensional and 3D constructs containing up to 2 separate cellular solutions suspended in type I collagen. The effects of various environmental factors, such as extrusion pressure, humidity, and stage heating, were examined with respect to the viability of the extruded cells. The data indicate that the system parameters required to extrude cells suspended in collagen do not adversely affect the viability of those cells. Maintaining a high humidity, especially when stage heat was applied, is critical in maintaining the viability of the printed cells. These results demonstrate that the BAT is capable of spatially organizing separate cellular solutions into a defined architecture; however, when cells were extruded in a supporting matrix of 3.0 mg/mL type I collagen, it was not possible to consistently generate adjacent, touching, but nonoverlapping lines of separate solutions. Thus, when a fabrication system such as BAT is used to generate complex, 3D viable constructs, the supporting matrix for the cells should be carefully chosen on the basis of such characteristics as its rate of polymerization and stiffness.

Three-dimensional bioassembly tool for generating viable tissue-engineered constructs.

The primary emphasis of tissue engineering is the design and fabrication of constructs for the replacement of nonfunctional tissue. Because tissue represents a highly organized interplay of cells and extracellular matrix, the fabrication of replacement tissue should mimic this spatial organization. This report details studies evaluating the use of a three-dimensional, direct-write cell deposition system to construct spatially organized viable structures. A direct-write bioassembly system was designed and fabricated to permit layer-by-layer placement of cells and extracellular matrix on a variety of material substrates. Human fibroblasts suspended in polyoxyethylene/polyoxypropylene were coextruded through a positive displacement pen delivery onto a polystyrene slide. After deposition, approximately 60% of the fibroblasts remained viable. Bovine aortic endothelial cells (BAECs) suspended in soluble collagen type I were coextruded via microdispense pen delivery onto the hydrophilic side of flat sheets of polyethylene terephthalate. After deposition with a 25-gauge tip, approximately 86% of the BAECs were viable. When maintained in culture for up to 35 days, the constructs remained viable and maintained their original spatial organization. These results indicate the potential for utilizing a direct-write, three-dimensional bioassembly tool to create viable, patterned tissue-engineered constructs.