RESUMO
Fluorine-18-fluorodeoxyglucose (18F-FDG) positron emission tomography (PET)/computed tomography (CT) is widely used for the detection, diagnosis, and clinical decision-making in oncological diseases. However, in daily medical practice, it is often difficult to make clinical decisions because of physiological FDG uptake or cancers with poor FDG uptake. False negative clinical diagnoses of malignant lesions are critical issues that require attention. In this study, Vision Transformer (ViT) was used to automatically classify 18F-FDG PET/CT slices as benign or malignant. This retrospective study included 18F-FDG PET/CT data of 207 (143 malignant and 64 benign) patients from a medical institute to train and test our models. The ViT model achieved an area under the receiver operating characteristic curve (AUC) of 0.90 [95% CI 0.89, 0.91], which was superior to the baseline Convolutional Neural Network (CNN) models (EfficientNet, 0.87 [95% CI 0.86, 0.88], P < 0.001; DenseNet, 0.87 [95% CI 0.86, 0.88], P < 0.001). Even when FDG uptake was low, ViT produced an AUC of 0.81 [95% CI 0.77, 0.85], which was higher than that of the CNN (DenseNet, 0.65 [95% CI 0.59, 0.70], P < 0.001). We demonstrated the clinical value of ViT by showing its sensitive analysis of easy-to-miss cases of oncological diseases.
Assuntos
Fluordesoxiglucose F18 , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Humanos , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada/métodos , Compostos Radiofarmacêuticos , Estudos Retrospectivos , Tomografia por Emissão de Pósitrons/métodosRESUMO
PURPOSE: To propose a five-point scale for radiology report importance called Report Importance Category (RIC) and to compare the performance of natural language processing (NLP) algorithms in assessing RIC using head computed tomography (CT) reports written in Japanese. MATERIALS AND METHODS: 3728 Japanese head CT reports performed at Osaka University Hospital in 2020 were included. RIC (category 0: no findings, category 1: minor findings, category 2: routine follow-up, category 3: careful follow-up, and category 4: examination or therapy) was established based not only on patient severity but also on the novelty of the information. The manual assessment of RIC for the reports was performed under the consensus of two out of four neuroradiologists. The performance of four NLP models for classifying RIC was compared using fivefold cross-validation: logistic regression, bidirectional long-short-term memory (BiLSTM), general bidirectional encoder representations of transformers (general BERT), and domain-specific BERT (BERT for medical domain). RESULTS: The proportion of each RIC in the whole data set was 15.0%, 26.7%, 44.2%, 7.7%, and 6.4%, respectively. Domain-specific BERT showed the highest accuracy (0.8434 ± 0.0063) in assessing RIC and significantly higher AUC in categories 1 (0.9813 ± 0.0011), 2 (0.9492 ± 0.0045), 3 (0.9637 ± 0.0050), and 4 (0.9548 ± 0.0074) than the other models (p < .05). Analysis using layer-integrated gradients showed that the domain-specific BERT model could detect important words, such as disease names in reports. CONCLUSIONS: Domain-specific BERT has superiority over the other models in assessing our newly proposed criteria called RIC of head CT radiology reports. The accumulation of similar and further studies of has a potential to contribute to medical safety by preventing missed important findings by clinicians.
Assuntos
Processamento de Linguagem Natural , Tomografia Computadorizada por Raios X , Humanos , Tomografia Computadorizada por Raios X/métodos , Japão , Algoritmos , Cabeça/diagnóstico por imagem , Sistemas de Informação em Radiologia , Feminino , Masculino , População do Leste AsiáticoRESUMO
BACKGROUND: Health-related patient-reported outcomes (HR-PROs) are crucial for assessing the quality of life among individuals experiencing low back pain. However, manual data entry from paper forms, while convenient for patients, imposes a considerable tallying burden on collectors. In this study, we developed a deep learning (DL) model capable of automatically reading these paper forms. METHODS: We employed the Japanese Orthopaedic Association Back Pain Evaluation Questionnaire, a globally recognized assessment tool for low back pain. The questionnaire comprised 25 low back pain-related multiple-choice questions and three pain-related visual analog scales (VASs). We collected 1305 forms from an academic medical center as the training set, and 483 forms from a community medical center as the test set. The performance of our DL model for multiple-choice questions was evaluated using accuracy as a categorical classification task. The performance for VASs was evaluated using the correlation coefficient and absolute error as regression tasks. RESULT: In external validation, the mean accuracy of the categorical questions was 0.997. When outputs for categorical questions with low probability (threshold: 0.9996) were excluded, the accuracy reached 1.000 for the remaining 65 % of questions. Regarding the VASs, the average of the correlation coefficients was 0.989, with the mean absolute error being 0.25. CONCLUSION: Our DL model demonstrated remarkable accuracy and correlation coefficients when automatic reading paper-based HR-PROs during external validation.
Assuntos
Aprendizado Profundo , Dor Lombar , Ortopedia , Humanos , Dor Lombar/diagnóstico , Dor Lombar/terapia , Qualidade de Vida , Japão , Dor nas Costas , Inquéritos e QuestionáriosRESUMO
We proposed a bimodal artificial intelligence that integrates patient information with images to diagnose spinal cord tumors. Our model combines TabNet, a state-of-the-art deep learning model for tabular data for patient information, and a convolutional neural network for images. As training data, we collected 259 spinal tumor patients (158 for schwannoma and 101 for meningioma). We compared the performance of the image-only unimodal model, table-only unimodal model, bimodal model using a gradient-boosting decision tree, and bimodal model using TabNet. Our proposed bimodal model using TabNet performed best (area under the receiver-operating characteristic curve [AUROC]: 0.91) in the training data and significantly outperformed the physicians' performance. In the external validation using 62 cases from the other two facilities, our bimodal model showed an AUROC of 0.92, proving the robustness of the model. The bimodal analysis using TabNet was effective for differentiating spinal tumors.
RESUMO
In this study, we present a self-supervised learning (SSL)-based model that enables anatomical structure-based unsupervised anomaly detection (UAD). The model employs an anatomy-aware pasting (AnatPaste) augmentation tool that uses a threshold-based lung segmentation pretext task to create anomalies in normal chest radiographs used for model pretraining. These anomalies are similar to real anomalies and help the model recognize them. We evaluate our model using three open-source chest radiograph datasets. Our model exhibits area under curves of 92.1%, 78.7%, and 81.9%, which are the highest among those of existing UAD models. To the best of our knowledge, this is the first SSL model to employ anatomical information from segmentation as a pretext task. The performance of AnatPaste shows that incorporating anatomical information into SSL can effectively improve accuracy.
RESUMO
Purpose: To assess whether transfer learning with a bidirectional encoder representations from transformers (BERT) model, pretrained on a clinical corpus, can perform sentence-level anatomic classification of free-text radiology reports, even for anatomic classes with few positive examples. Materials and Methods: This retrospective study included radiology reports of patients who underwent whole-body PET/CT imaging from December 2005 to December 2020. Each sentence in these reports (6272 sentences) was labeled by two annotators according to body part ("brain," "head & neck," "chest," "abdomen," "limbs," "spine," or "others"). The BERT-based transfer learning approach was compared with two baseline machine learning approaches: bidirectional long short-term memory (BiLSTM) and the count-based method. Area under the precision-recall curve (AUPRC) and area under the receiver operating characteristic curve (AUC) were computed for each approach, and AUCs were compared using the DeLong test. Results: The BERT-based approach achieved a macro-averaged AUPRC of 0.88 for classification, outperforming the baselines. AUC results for BERT were significantly higher than those of BiLSTM for all classes and those of the count-based method for the "brain," "chest," "abdomen," and "others" classes (P values < .025). AUPRC results for BERT were superior to those of baselines even for classes with few labeled training data (brain: BERT, 0.95, BiLSTM, 0.11, count based, 0.41; limbs: BERT, 0.74, BiLSTM, 0.28, count based, 0.46; spine: BERT, 0.82, BiLSTM, 0.53, count based, 0.69). Conclusion: The BERT-based transfer learning approach outperformed the BiLSTM and count-based approaches in sentence-level anatomic classification of free-text radiology reports, even for anatomic classes with few labeled training data.Keywords: Anatomy, Comparative Studies, Technology Assessment, Transfer Learning Supplemental material is available for this article. © RSNA, 2023.
RESUMO
OBJECTIVES: To compare the performance of radiologists in characterizing and diagnosing pulmonary nodules/masses with and without deep learning (DL)-based computer-aided diagnosis (CAD). METHODS: We studied a total of 101 nodules/masses detected on CT performed between January and March 2018 at Osaka University Hospital (malignancy: 55 cases). SYNAPSE SAI Viewer V1.4 was used to analyze the nodules/masses. In total, 15 independent radiologists were grouped (n = 5 each) according to their experience: L (< 3 years), M (3-5 years), and H (> 5 years). The likelihoods of 15 characteristics, such as cavitation and calcification, and the diagnosis (malignancy) were evaluated by each radiologist with and without CAD, and the assessment time was recorded. The AUCs compared with the reference standard set by two board-certified chest radiologists were analyzed following the multi-reader multi-case method. Furthermore, interobserver agreement was compared using intraclass correlation coefficients (ICCs). RESULTS: The AUCs for ill-defined boundary, irregular margin, irregular shape, calcification, pleural contact, and malignancy in all 15 radiologists, irregular margin and irregular shape in L and ill-defined boundary and irregular margin in M improved significantly (p < 0.05); no significant improvements were found in H. L showed the greatest increase in the AUC for malignancy (not significant). The ICCs improved in all groups and for nearly all items. The median assessment time was not prolonged by CAD. CONCLUSIONS: DL-based CAD helps radiologists, particularly those with < 5 years of experience, to accurately characterize and diagnose pulmonary nodules/masses, and improves the reproducibility of findings among radiologists. KEY POINTS: ⢠Deep learning-based computer-aided diagnosis improves the accuracy of characterizing nodules/masses and diagnosing malignancy, particularly by radiologists with < 5 years of experience. ⢠Computer-aided diagnosis increases not only the accuracy but also the reproducibility of the findings across radiologists.
Assuntos
Aprendizado Profundo , Neoplasias Pulmonares , Nódulos Pulmonares Múltiplos , Nódulo Pulmonar Solitário , Humanos , Variações Dependentes do Observador , Reprodutibilidade dos Testes , Nódulos Pulmonares Múltiplos/diagnóstico por imagem , Radiologistas , Diagnóstico por Computador/métodos , Computadores , Neoplasias Pulmonares/diagnóstico por imagem , Sensibilidade e Especificidade , Nódulo Pulmonar Solitário/diagnóstico por imagemRESUMO
BACKGROUND: The Japanese Orthopaedic Association National Registry (JOANR) was recently launched in Japan and is expected to improve the quality of medical care. However, surgeons must register ten detailed features for total hip arthroplasty, which is labor intensive. One possible solution is to use a system that automatically extracts information about the surgeries. Although it is not easy to extract features from an operative record consisting of free-text data, natural language processing has been used to extract features from operative records. This study aimed to evaluate the best natural language processing method for building a system that automatically detects some elements in the JOANR from the operative records of total hip arthroplasty. METHODS: We obtained operative records of total hip arthroplasty (n = 2574) in three hospitals and targeted two items: surgical approach and fixation technique. We compared the accuracy of three natural language processing methods: rule-based algorithms, machine learning, and bidirectional encoder representations from transformers (BERT). RESULTS: In the surgical approach task, the accuracy of BERT was superior to that of the rule-based algorithm (99.6% vs. 93.6%, p < 0.001), comparable to machine learning. In the fixation technique task, the accuracy of BERT was superior to the rule-based algorithm and machine learning (96% vs. 74%, p < 0.0001 and 94%, p = 0.0004). CONCLUSIONS: BERT is the most appropriate method for building a system that automatically detects the surgical approach and fixation technique.
Assuntos
Inteligência Artificial , Ortopedia , Humanos , Algoritmos , Sistema de Registros , Japão , Procedimentos Cirúrgicos Operatórios , Prontuários Médicos , Aprendizado de MáquinaRESUMO
In the present article, we provide an overview on the basics of deep learning in terms of technical aspects and steps required to launch a deep learning research. Deep learning is a branch of artificial intelligence, which has been attracting interest in many domains. The essence of deep learning can be compared to teaching an elementary school student how to differentiate magnetic resonance images, and we first explain the concept using this analogy. Deep learning models are composed of many layers including input, hidden, and output ones. Convolutional neural networks are suitable for image processing as convolutional and pooling layers allow successfully performing extraction of image features. The process of conducting a research work with deep learning can be divided into the nine following steps: computer preparation, software installation, specifying the function, data collection, data edits, dataset creation, programming, program execution, and verification of results. Concerning widespread expectations, deep learning cannot be applied to solve tasks other than those set in specification; moreover, it requires a large amount of data to train and has difficulties with recognizing unknown concepts. Deep learning cannot be considered as a universal tool, and researchers should have thorough understanding of the features of this technique.