Identification of Pseudomonas aeruginosa exopolysaccharide Psl in biofilms using 3D OrbiSIMS.

Secondary ion mass spectrometry (SIMS) offers advantages over both liquid extraction mass spectrometry and matrix assisted laser desorption mass spectrometry in that it provides the direct in situ analysis of molecules and has the potential to preserve the 3D location of an analyte in a sample. Polysaccharides are recognized as challenging analytes in the mass spectrometry of liquids and are also difficult to identify and assign using SIMS. Psl is an exopolysaccharide produced by Pseudomonas aeruginosa, which plays a key role in biofilm formation and maturation. In this Letter, we describe the use of the OrbiTrap analyzer with SIMS (3D OrbiSIMS) for the label-free mass spectrometry of Psl, taking advantage of its high mass resolving power for accurate secondary ion assignment. We study a P. aeruginosa biofilm and compare it with purified Psl to enable the assignment of secondary ions specific to the Psl structure. This resulted in the identification of 17 peaks that could confidently be ascribed to Psl fragments within the biofilm matrix. The complementary approach of the following neutral loss sequences is also shown to identify multiple oligosaccharide fragments without the requirement of a biological reference sample.

Cryo-scanning electron microscopy demonstrates that ice morphology is not associated with the post-thaw survival of domestic boar (Sus domesticus) spermatozoa: A comparison of directional and conventional freezing methods.

Directional freezing (in 2 or 10 ml hollow glass tubes) has been reported to improve post-thaw sperm survival parameters compared to conventional methods (in 0.5 ml straws). However, the biophysical properties that increase post-thaw survival are poorly understood. Therefore, the aim for the current study was to investigate the effect of ice morphology on the post-thaw survival of domestic boar spermatozoa directionally and conventionally cryopreserved in 0.5 ml straws. Ice morphology was quantitatively analyzed using a combination of cryo-scanning electron microscopy and Fiji Shape Descriptors. Multivariate analysis found a significant, non-linear effect (p < 0.05) of interface velocity on ice morphology, with an increase in both ice-lake size, as indicated by area and in aspect ratio, at an interface velocity of 0.2 mm/s. By contrast, post-thaw sperm survival (defined as spermatozoa with both intact plasma membranes and acrosomes) was biphasic, with peaks of survival at interface velocities of 0.2 mm/s (54.2 ± 1.9%), and 1.0 or 1.5 mm/s (56.5 ± 1.5%, 56.7 ± 1.7% respectively), and lowest survival at 0.5 (52.1 ± 1.6%) and 3.0 mm/s (51.4 ± 1.9%). Despite numerical differences in Shape Descriptors, there was no difference (p > 0.05) in the post-thaw survival between conventionally and directionally cryopreserved samples at optimal interface velocities of 1.0 or 1.5 mm/s. These findings suggest that: 1) ice morphology has little impact on post-thaw survival of boar spermatozoa, and 2) directional freezing in 0.5 ml straws (rather than 2 or 10 ml hollow glass tubes) may attenuate benefits of directional freezing.

Metallocatanionic vesicle-mediated enhanced singlet oxygen generation and photodynamic therapy of cancer cells.

In clinics, photodynamic therapy (PDT) is established as a non-invasive therapeutic modality for certain types of cancers and skin disease. However, due to poor water solubility, photobleaching, and the dark toxicity of photosensitizers (PSs), further developments are required to improve the efficiency of PDT. Herein, we report the role of metallocatanionic vesicles (MCVs) in enhancing the phototoxicity of methylene blue (MB) against cancer cells. These MCVs were prepared via a facile and quick solution-solution mixing method using a cationic single-chain metallosurfactant (FeCPC I) in combination with anionic sodium oleate (Na Ol). For singlet oxygen (1O2) generation and PDT studies, two fractions of FeCPC I : Na Ol, i.e., 30 : 70 (V37) and 70 : 30 (V73), were chosen based on their long-term stability in aqueous media. A cationic PS MB was loaded into these vesicles. The MB-loaded MCV 30 : 70 and 70 : 30 fractions enhanced the 1O2 generation by 0.10- and 0.40-fold, respectively, compared with MB alone. Upon illumination using a 650 nm laser, these MB-loaded V73 and V37 MCVs significantly decreased the metabolic activity of MCF-7 cells by ≤50% at a concentration of 0.75 µM. Furthermore, the SOSG assay revealed that the synthesized MCVs enhanced the intracellular 1O2 compared with MB alone. The MB-loaded V73 MCVs showed the highest 1O2-mediated membrane damage and cell-killing effect, as confirmed using the differential nuclear staining assay (DNS), which is attributed to the cellular uptake profile of the different MCV fractions. Altogether, this work shows the advantage of using these biocompatible and dual-charge MCVs as promising delivery vehicles that can enhance the 1O2 generation from the PS. This work suggests the future application of these Fe-MCVs in magnetically guided PDT.

Efficacy of antimicrobial and anti-viral coated air filters to prevent the spread of airborne pathogens.

The COVID-19 pandemic has demonstrated the real need for mechanisms to control the spread of airborne respiratory pathogens. Thus, preventing the spread of disease from pathogens has come to the forefront of the public consciousness. This has brought an increasing demand for novel technologies to prioritise clean air. In this study we report on the efficacy of novel biocide treated filters and their antimicrobial activity against bacteria, fungi and viruses. The antimicrobial filters reported here are shown to kill pathogens, such as Candida albicans, Escherichia coli and MRSA in under 15 min and to destroy SARS-CoV-2 viral particles in under 30 s following contact with the filter. Through air flow rate testing, light microscopy and SEM, the filters are shown to maintain their structure and filtration function. Further to this, the filters are shown to be extremely durable and to maintain antimicrobial activity throughout the operational lifetime of the product. Lastly, the filters have been tested in field trials onboard the UK rail network, showing excellent efficacy in reducing the burden of microbial species colonising the air conditioning system.

Electric Field Induced Biomimetic Transmembrane Electron Transport Using Carbon Nanotube Porins.

Cells modulate their homeostasis through the control of redox reactions via transmembrane electron transport systems. These are largely mediated via oxidoreductase enzymes. Their use in biology has been linked to a host of systems including reprogramming for energy requirements in cancer. Consequently, the ability to modulate membrane redox systems may give rise to opportunities to modulate underlying biology. The current work aims to develop a wireless bipolar electrochemical approach to form on-demand electron transfer across biological membranes. To achieve this goal, it is shown that by using membrane inserted carbon nanotube porins (CNTPs) that can act as bipolar nanoelectrodes, one can control electron flow with externally applied electric fields across membranes. Before this work, bipolar electrochemistry has been thought to require high applied voltages not compatible with biological systems. It is shown that bipolar electrochemical reaction via gold reduction at the nanotubes can be modulated at low cell-friendly voltages, providing an opportunity to use bipolar electrodes to control electron flux across membranes. The authors provide new mechanistic insight into this newly describe phenomena at the nanoscale. The results presented give rise to a new method using CNTPs to modulate cell behavior via wireless control of membrane electron transfer.

Rapid scale-up and production of active-loaded PEGylated liposomes.

Manufacturing of liposomal nanomedicines (e.g. Doxil®/Caelyx®) is a challenging and slow process based on multiple-vessel and batch processing techniques. As a result, the translation of these nanomedicines from bench to bedside has been limited. Microfluidic-based manufacturing offers the opportunity to address this issue, and de-risk the wider adoption of nanomedicines. Here we demonstrate the applicability of microfluidics for continuous manufacturing of PEGylated liposomes encapsulating ammonium sulfate (250 mM). Doxorubicin was subsequently active-loaded into these pre-formed liposomes. Critical process parameters and material considerations demonstrated to influence the liposomal product attributes included solvent selection and lipid concentration, flow rate ratio, and temperature and duration used for drug loading. However, the total flow rate did not affect the liposome product characteristics, allowing high production speeds to be adopted. The final liposomal product comprised of 80-100 nm vesicles (PDI < 0.2) encapsulating ≥ 90% doxorubicin, with matching release profiles to the innovator product and is stable for at least 6 months. Additionally, vincristine and acridine orange were active-loaded into these PEGylated liposomes (≥ 90% and ~100 nm in size) using the same process. These results demonstrate the ability to produce active-loaded PEGylated liposomes with high encapsulation efficiencies and particle sizes which support tumour targeting.

Transition metal decorated soft nanomaterials through modular self-assembly of an asymmetric hybrid polyoxometalate.

An asymmetrically functionalised Wells-Dawson organic-inorganic hybrid polyoxometalate has been post-functionalised by Pt2+ coordination, and demonstrates self-assembly into surface-decorated micellar nanostructures. This multifunctional hybrid material is found to be a redox-active soft nanomaterial and demonstrates a new molecular design strategy with potential for applications in photo- or electro-catalysis.

Using microfluidics for scalable manufacturing of nanomedicines from bench to GMP: A case study using protein-loaded liposomes.

Nanomedicines are well recognised for their ability to improve therapeutic outcomes. Yet, due to their complexity, nanomedicines are challenging and costly to produce using traditional manufacturing methods. For nanomedicines to be widely exploited, new manufacturing technologies must be adopted to reduce development costs and provide a consistent product. Within this study, we investigate microfluidic manufacture of nanomedicines. Using protein-loaded liposomes as a case study, we manufacture liposomes with tightly defined physico-chemical attributes (size, PDI, protein loading and release) from small-scale (1 mL) through to GMP volume production (200 mL/min). To achieve this, we investigate two different laminar flow microfluidic cartridge designs (based on a staggered herringbone design and a novel toroidal mixer design); for the first time we demonstrate the use of a new microfluidic cartridge design which delivers seamless scale-up production from bench-scale (12 mL/min) through GMP production requirements of over 20 L/h using the same standardised normal operating parameters. We also outline the application of tangential flow filtration for down-stream processing and high product yield. This work confirms that defined liposome products can be manufactured rapidly and reproducibly using a scale-independent production process, thereby de-risking the journey from bench to approved product.

Asymmetric Hybrid Polyoxometalates: A Platform for Multifunctional Redox-Active Nanomaterials.

Access to asymmetrically functionalized polyoxometalates is a grand challenge as it could lead to new molecular nanomaterials with multiple or modular functionality. Now, a simple one-pot synthetic approach to the isolation of an asymmetrically functionalized organic-inorganic hybrid Wells-Dawson polyoxometalate in good yield is presented. The cluster bears two organophosphonate moieties with contrasting physical properties: a chelating metal-binding group, and a long aliphatic chain that facilitates solvent-dependent self-assembly into soft nanostructures. The orthogonal properties of the modular system are effectively demonstrated by controlled assembly of POM-based redox-active nanoparticles. This simple, high-yielding synthetic method is a promising new approach to the preparation of multi-functional hybrid metal oxide clusters, supermolecular systems, and soft-nanomaterials.