Effect of human secretory calcium-binding phosphoprotein proline-glutamine rich 1 protein on Porphyromonas gingivalis and identification of its active portions.

The mouth environment comprises the second most significant microbiome in the body, and its equilibrium is critical in oral health. Secretory calcium-binding phosphoprotein proline-glutamine rich 1 (SCPPPQ1), a protein normally produced by the gingival epithelium to mediate its attachment to teeth, was suggested to be bactericidal. Our aim was to further explore the antibacterial potential of human SCPPPQ1 by characterizing its mode of action and identifying its active portions. In silico analysis showed that it has molecular parallels with antimicrobial peptides. Incubation of Porphyromonas gingivalis, a major periodontopathogen, with the full-length protein resulted in decrease in bacterial number, formation of aggregates and membrane disruptions. Analysis of SCPPPQ1-derived peptides indicated that these effects are sustained by specific regions of the molecule. Altogether, these data suggest that human SCPPPQ1 exhibits antibacterial capacity and provide new insight into its mechanism of action.

Laminin γ2 knockout mice rescued with the human protein exhibit enamel maturation defects.

The epithelial ameloblasts are separated from the maturing enamel by an atypical basement membrane (BM) that is enriched in laminin 332 (LM-332). This heterotrimeric protein (α3, ß3 and γ2 chains) provides structural integrity to BMs and influences various epithelial cell processes including cell adhesion and differentiation. Mouse models that lack expression of individual LM-332 chains die shortly after birth. The lethal phenotype of laminin γ2 knockout mice can be rescued by human laminin γ2 (LAMC2) expressed using a doxycycline-inducible (Tet-on) cytokeratin 14 promoter-rtTA. These otherwise normal-looking rescued mice exhibit white spot lesions on incisors. We therefore investigated the effect of rescue with human LAMC2 on enamel maturation and structuring of the atypical BM. The maturation stage enamel organ in transgenic mice was severely altered as compared to wild type controls, a structured BM was no longer discernible, dystrophic matrix appeared in the maturing enamel layer, and there was residual enamel matrix late into the maturation stage. Microtomographic scans revealed excessive wear of occlusal surfaces on molars, chipping of enamel on incisor tips, and hypomineralization of the enamel layer. No structural alterations were observed at other epithelial sites, such as skin, palate and tongue. These results indicate that while this humanized mouse model is capable of rescue in various epithelial tissues, it is unable to sustain structuring of a proper BM at the interface between ameloblasts and maturing enamel. This failure may be related to the atypical composition of the BM in the maturation stage and reaffirms that the atypical BM is essential for enamel maturation.

Influence of periodontal tissue thickness on buccal plate remodelling on immediate implants with xenograft.

AIM: To evaluate the influence of gingival thickness and bone grafting on buccal bone plate remodelling after immediate implant placement in sockets with thin buccal bone, using a flapless approach. MATERIALS AND METHODS: The gingiva of eight dogs was thinned at one side of the mandible, mandibular premolars were extracted without flaps, and four implants were installed on each side at 1.5 mm from the buccal bone. The sites were randomly assigned into: TG (test group) = thin gingiva; TG + GM (TG with grafting material); CG (control group) = normal gingiva; and CG + GM (CG with grafting material). After 12 weeks the dogs were sacrificed and the samples were processed for histological analysis. RESULTS: All animals exhibited a thin buccal bone initially. In all the experimental groups the buccal gap was filled with newly formed bone and the buccal bone level was slightly apical to the implant shoulder. There were no statistically significant differences among the groups for the histomorphometric parameters. CONCLUSIONS: The thickness of the buccal bone was a fundamental factor in buccal bone plate resorption, even with flapless implantation. The gingival thickness or the addition of a biomaterial in the gap did not influence the results.

Characterisation of secretory calcium-binding phosphoprotein-proline-glutamine-rich 1: a novel basal lamina component expressed at cell-tooth interfaces.

Functional genomic screening of the rat enamel organ (EO) has led to the identification of a number of secreted proteins expressed during the maturation stage of amelogenesis, including amelotin (AMTN) and odontogenic ameloblast-associated (ODAM). In this study, we characterise the gene, protein and pattern of expression of a related protein called secretory calcium-binding phosphoprotein-proline-glutamine-rich 1 (SCPPPQ1). The Scpppq1 gene resides within the secretory calcium-binding phosphoprotein (Scpp) cluster. SCPPPQ1 is a highly conserved, 75-residue, secreted protein rich in proline, leucine, glutamine and phenylalanine. In silico data mining has revealed no correlation to any known sequences. Northern blotting of various rat tissues suggests that the expression of Scpppq1 is restricted to tooth and associated tissues. Immunohistochemical analyses show that the protein is expressed during the late maturation stage of amelogenesis and in the junctional epithelium where it localises to an atypical basal lamina at the cell-tooth interface. This discrete localisation suggests that SCPPPQ1, together with AMTN and ODAM, participates in structuring the basal lamina and in mediating attachment of epithelia cells to mineralised tooth surfaces.

Osteogenic cell cultures cannot utilize exogenous sources of synthetic polyphosphate for mineralization.

Phosphate is critical for mineralization and deficiencies in the regulation of free phosphate lead to disease. Inorganic polyphosphates (polyPs) may represent a physiological source of phosphate because they can be hydrolyzed by biological phosphatases. To investigate whether exogenous polyP could be utilized for mineral formation, mineralization was evaluated in two osteogenic cell lines, Saos-2 and MC3T3, expressing different levels of tissue non-specific alkaline phosphatase (tnALP). The role of tnALP was further explored by lentiviral-mediated overexpression in MC3T3 cells. When cells were cultured in the presence of three different phosphate sources, there was a strong mineralization response with ß-glycerophosphate (ßGP) and orthophosphate (Pi) but none of the cultures sustained mineralization in the presence of polyP (neither chain length 17-Pi nor 42-Pi). Even in the presence of mineralizing levels of phosphate, low concentrations of polyP (50 µM) were sufficient to inhibit mineral formation. Energy-dispersive X-ray spectroscopy confirmed the presence of apatite-like mineral deposits in MC3T3 cultures supplemented with ßGP, but not in those with polyP. While von Kossa staining was consistent with the presence or absence of mineral, an unusual Alizarin staining was obtained in polyP-treated MC3T3 cultures. This staining pattern combined with low Ca:P ratios suggests the persistence of Ca-polyP complexes, even with high residual ALP activity. In conclusion, under standard culture conditions, exogenous polyP does not promote mineral deposition. This is not due to a lack of active ALP, and unless conditions that favor significant processing of polyP are achieved, its mineral inhibitory capacity predominates.

Gene expression profiling and histomorphometric analyses of the early bone healing response around nanotextured implants.

UNLABELLED: While in vitro studies have shown that nanoscale surface modifications influence cell fate and activity, there is little information on how they modulate healing at the bone-implant interface. AIM: This study aims to investigate the effect of nanotopography at early time intervals when critical events for implant integration occur. MATERIALS & METHODS: Untreated and sulfuric acid/hydrogen peroxide-treated machined-surface titanium alloy implants were placed in rat tibiae. Samples were processed for DNA microarray analysis and histomorphometry. RESULTS: At both 3 and 5 days, the gene expression profile of the healing tissue around nanotextured implants differed from that around machined-surface implants or control empty holes, and were accompanied by an increase in bone-implant contact on day 5. While some standard pathways such as the immune response predominated, a number of unclassified genes were also implicated. CONCLUSION: Nanotexture elicits an initial gene response that is more complex than suspected so far and favors healing at the bone-implant interface.

Micromotion-induced strain fields influence early stages of repair at bone-implant interfaces.

Implant loading can create micromotion at the bone-implant interface. The interfacial strain associated with implant micromotion could contribute to regulating the tissue healing response. Excessive micromotion can lead to fibrous encapsulation and implant loosening. Our objective was to characterize the influence of interfacial strain on bone regeneration around implants in mouse tibiae. A micromotion system was used to create strain under conditions of (1) no initial contact between implant and bone and (2) direct bone-implant contact. Pin- and screw-shaped implants were subjected to displacements of 150 or 300 µm for 60 cycles per day for 7 days. Pin-shaped implants placed in five animals were subjected to three sessions of 150 µm displacement per day, with 60 cycles per session. Control implants in both types of interfaces were stabilized throughout the healing period. Experimental strain analyses, microtomography, image-based displacement mapping, and finite element simulations were used to characterize interfacial strain fields. Calcified tissue sections were prepared and Goldner trichrome stained to evaluate the tissue reactions in higher and lower strain regions. In stable implants bone formation occurred consistently around the implants. In implants subjected to micromotion bone regeneration was disrupted in areas of high strain concentrations (e.g. >30%), whereas lower strain values were permissive of bone formation. Increasing implant displacement or number of cycles per day also changed the strain distribution and disturbed bone healing. These results indicate that not only implant micromotion but also the associated interfacial strain field contributes to regulating the interfacial mechanobiology at healing bone-implant interfaces.

Odontogenic ameloblast-associated and amelotin are novel basal lamina components.

Odontogenic ameloblast-associated (ODAM) and amelotin (AMTN) are secreted by maturation stage ameloblasts and accumulate at the interface with enamel where an atypical basal lamina (BL) is present. This study aimed at determining and quantifying the ultrastructural distribution of ODAM and AMTN at the cell-tooth interface. Ultrathin sections of enamel organs from the early to mid- and late maturation stage of amelogenesis were processed for immunogold labeling with antibodies against ODAM, AMTN or with the lectins wheat germ agglutinin, Helix pomatia agglutinin (HPA) and Ricinus communis I agglutinin. Immunolabeling showed that both ODAM and AMTN localized to the BL. Quantitative analyses indicated that at the beginning of maturation there is a concentration of ODAM on the cell side of the BL while AMTN appears more concentrated on the enamel side. In the late maturation stage, such differential distribution is no longer apparent. All three lectins are bound to the BL. Competitive incubation with native lectins did not affect the binding efficiency of ODAM; however, AMTN binding was significantly reduced after incubation with HPA. In conclusion, ODAM and AMTN are bona fide components of the BL associated with maturation stage ameloblasts and they organize into different subdomains during the early maturation stage. The data also suggest that the BL is a dynamic structure that rearranges its organization as enamel maturation advances. Finally, the abrogation of AMTN antibody labeling by HPA supports the presence of O-linked sugars in the molecule and/or its close association with other O-glycosylated molecules.

Initial evaluation of bone ingrowth into a novel porous titanium coating.

Porous metals (sintered beads and meshes) have been used for many years for different orthopedic applications. Metal foams have been recently developed. These foams have the advantage of being more porous than the traditional coatings. Their high porosity provides more space for bone ingrowth and mechanical interlocking and presents more surface for implant-bone contact. The objective of this study was to evaluate in vivo bone ingrowth into Ti implants covered with a novel Ti foam coating. This foam contains 50% in volume of interconnected pores and a higher surface area compared to dense Ti. Both coated implants and dense Ti controls were placed transcortically in the rat tibia. The animals were sacrificed at 2 weeks after implantation, and the amount of bone in the implants was determined using backscattered electron imaging and X-ray microtomography. Already at this time interval, the pores within the Ti foam showed 97.7% bone filling, and the bone-implant contact area was significantly increased compared to dense Ti controls. These initial results indicate that this novel Ti foam is biocompatible, has the capacity to sustain bone formation, and can potentially improve osseointegration.

A mouse model expressing a truncated form of ameloblastin exhibits dental and junctional epithelium defects.

Ameloblastin (AMBN) is the second most abundant extracellular matrix protein produced by the epithelial cells called ameloblasts and is found mainly in forming dental enamel. Inactivation of its expression by gene knockout results in absence of the enamel layer and its replacement by a thin layer of dysplastic mineralized matrix. The objective of this study was to further characterize the enamel organ and mineralized matrix produced in the AMBN knockout mouse. However, in the course of our study, we unexpectedly found that this mouse is in fact a mutant that does not express the full-length protein but that produces a truncated form of AMBN. Mandibles from wild type and mutant mice were processed for morphological analyses and immunolabeling. Microdissected enamel organs and associated matrix were also prepared for molecular and biochemical analyses. In incisors from mutants, ameloblasts lost their polarized organization and the enamel organ detached from the tooth surface and became disorganized. A thin layer of dysplastic mineralized material was deposited onto dentin, and mineralized masses were present within the enamel organ. These mineralized materials generated lower backscattered electron contrast than normal enamel, and immunocytochemistry with colloidal gold revealed the presence of amelogenin, bone sialoprotein and osteopontin. In addition, the height of the alveolar bone was reduced, and the junctional epithelium lost its integrity. Immunochemical and RT-PCR results revealed that the altered enamel organ in the mutant mice produced a shorter AMBN protein that is translated from truncated RNA missing exons 5 and 6. These results indicate that absence of full-length protein and/or expression of an incomplete protein have direct/indirect effects beyond structuring of mineral during enamel formation, and highlight potential functional regions on the AMBN molecule.

In vivo functional analysis of polyglutamic acid domains in recombinant bone sialoprotein.

Bone sialoprotein (BSP) is an anionic phosphoprotein expressed in mineralizing connective tissues that binds to hydroxyapatite and nucleates its formation in vitro. Two polyglutamic acid regions (poly [E]) are believed to participate in these activities. The aim of this study was to evaluate the contribution of these acidic regions to the binding of prokaryote recombinant BSP (prBSP(E)) within an actual in vivo environment. Full-length prBSP(E) and prBSP(E) in which the poly [E] domains were replaced by polyalanine (prBSP(A)) were tagged with dinitrophenol (DNP). Tagged preparations comprised intact molecules and some fragmented forms. They were infused through a surgically created hole in the bone of rat hemimandibles and detected using immunogold labeling with anti-DNP antibodies. prBSP(E)-DNP was consistently immunodetected along exposed mineralized bone surfaces and osteocyte canaliculi at the surgical site. Few gold particles were observed on these surfaces when prBSP(A)-DNP was infused. Quantitative analyses showed significant differences in labeling between prBSP(E)-DNP (5.04 +/- 0.73 particles/micro m2) and prBSP(A)-DNP (1.37 +/- 0.35 particles/micro m2). These results indicate that poly [E] domains influence binding of prBSP(E) to surfaces presenting a mixture of mineral and proteins bathed by tissue fluids and suggest that they may similarly mediate the interaction of native BSP in the bone environment.

A tracer study with systemically and locally administered dinitrophenylated osteopontin.

Osteopontin (OPN), a major non-collagenous matrix protein of bone, is also found in tissue fluids and in the circulation. It is still not clear whether circulating OPN contributes to bone formation. To elucidate this question, rat OPN was tagged with dinitrophenol groups and administered to rats either intravenously or by infusion with an osmotic minipump through a "surgical window" in the bone of the hemimandible. Dinitrophenylated rat albumin (ALB) was used as a control. The presence and distribution of tagged proteins were revealed by immunogold labeling on sections of tibia and alveolar bone. Tagged molecules of OPN were found in mineralization foci, surfaces and interfaces, and matrix accumulations among calcified collagen fibrils. Even though dinitrophenylated ALB was administered at several-fold higher concentrations, it did not accumulate in these sites. These results show that circulating OPN can be incorporated into specific compartments of forming bone and suggest that such molecules may play a more important role than previously suspected.