Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
Sci Rep ; 12(1): 2164, 2022 Feb 09.
Artigo em Inglês | MEDLINE | ID: mdl-35140304

RESUMO

In seawater pipeline, the welding joint is a non-uniform structure composed of welding seam, base metal and heat affected zone. It has inhomogeneity in chemical composition, organizational structure, residual stress, etc. As local defects and high turbulence accelerate corrosion, the welding joint is often the weakest link in pipeline corrosion. Herein, the electrochemical corrosion behavior of B10 alloy welded joint in flowing seawater is studied from macroscopic and submicroscopic viewpoints using AC impedance, linear polarization, array electrode and morphological characterization. The results reveal that the corrosion rate of weld metal (WM), base metal (BM) and heat-affected zone (HAZ) decreased with the increase of time. Combined with SEM and EDS analysis, it can be seen that the increase in time led to the decomposition and accumulation of corrosion products, which gradually enhanced the corrosion resistance of welded joints. At the submicroscopic scale, WM acts as a cathode to mitigate corrosion during the later stages of high flow rate.

2.
Chemosphere ; 146: 32-9, 2016 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-26706929

RESUMO

Halonitromethanes (HNMs), as an emerging class of disinfection by-products containing nitrogen (N-DBPs) in drinking water, have possessed public health concerns. Two most studied materials, graphene and nanometer-sized zero-valent iron, have been successfully combined into binary nanocomposites (G-nZVI) via facile carbonization and calcinations of glucose and ferric chloride, which was used in the removal of HNMs from drinking water in this study. When the Fe/C mass ratio was 1:5, the as-prepared G-nZVI hybrids comprised numerous dispersed Fe(0) nanoparticles with a range of 5-10 nm in diameter. Batch experimental results indicated that the as-prepared G-nZVI could effectively remove trichloronitromethane (TCNM), a dominant in the group of HNMs from drinking water. About 99% of initial TCNM could be adsorbed and degraded under 60 mg/L G-nZVI dosage within 120 min. Kinetic studies indicated that the removal of TCNM by G-nZVI followed a pseudo first order rate (R(2) > 0.9). The degradation pathways of TCNM by G-nZVI nanocomposites might include dechlorination and denitration of TCNM. The Fe was in the form of iron oxides in the graphene material shape which was then restored to Fe(0) again via calcinations. These results indicated that the synthesized G-nZVI nanocomposites could be a powerful material to remove HNMs from drinking water.


Assuntos
Água Potável/análise , Grafite/química , Hidrocarbonetos Clorados/química , Ferro/química , Nanopartículas Metálicas/química , Poluentes Químicos da Água/química , Purificação da Água/métodos , Adsorção , Cinética
3.
Se Pu ; 32(8): 843-8, 2014 Aug.
Artigo em Chinês | MEDLINE | ID: mdl-25434120

RESUMO

A determination method of 12 phenolic compounds in soil and sediment samples by gas chromatography-mass spectrometry (GC-MS) analysis coupled with accelerated solvent extraction (ASE) and gel permeation chromatography (GPC) for clean-up was developed. The method detection limits (MDLs) varied from 0. 410 µg/kg to 13. 1 µg/kg (dry weight), and the average recoveries ranged from 70. 7% to 122% with the relative standard deviations (RSDs) of 1. 2% to 16%. Based on this method, the levels of 12 phenolic compounds were investigated in 17 soil surrounding a chemical industrial park along the Yangtze River and seven sediment samples collected in the river. It was found that 11 of the 12 phenolic compounds were detected in all of the 24 samples, and only hydroquinone was below the MDL. The contents of the total 12 phenolic compounds were 10. 16-30. 66 mg/kg in the soil and 18. 00-29. 83 mg/kg in the sediment, with the average contents of 18. 26 and 22. 51 mg/kg respectively. It showed that 4-nitro- phenol, 4-chloro-3-methylphenol, 2-chlorohydroquinone, 2-methyl-4,6-dinitrophenol and 2,4,6- trichlorophenol were five major phenolic contaminants in the soil and sediment in this study. The pollution levels of the 12 phenolic compounds were low in the soil of the chemical industrial park as well as in the sediment of the Yangtze River, which implied a comparatively low risk for the environment.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA