RESUMO
Three-dimensional (3D) printing is an emerging and booming industry in Taiwan. Compared to traditional manufacturing, 3D printing has various advantages, such as advanced customization, additive manufacturing, reduced mold opening time, and reduced consumption of precursors. In this study, the real-time monitoring of particulate matter (PM) and total volatile organic compound (TVOC) emissions from various filaments is investigated using fused deposition modeling with material extrusion technology, a liquid-crystal display, a stereolithography apparatus based on vat photopolymerization technology, and binder jetting for occupational settings. An exposure assessment for nearby workers using the 3D printing process was performed, and improvement measures were recommended. Nine 3D printing fields were measured. The generation rate of ultrafine particles ranged from 1.19 × 1010 to 4.90 × 1012 #/min, and the geometric mean particle size ranged from 30.91 to 55.50 nm. The average concentration of ultrafine particles ranged from 2.31 × 103 to 7.36 × 104 #/cm3, and the PM2.5 and PM10 concentrations in each field ranged from 0.74 ± 0.27 to 12.46 ± 5.61 µg/m3 and from 2.39 ± 0.60 to 30.65 ± 21.26 µg/m3, respectively. The TVOC concentration ranged from 0.127 ± 0.012 to 1.567 ± 0.172 ppm. The respiratory deposition (RDUFPs) dose ranged from 2.02 × 1013 to 5.54 × 1014 nm2/day. Depending on the operating conditions, appropriate control and protective measures should be employed to protect workers' health.
Assuntos
Poluição do Ar em Ambientes Fechados , Compostos Orgânicos Voláteis , Humanos , Taiwan , Poluição do Ar em Ambientes Fechados/análise , Material Particulado/análise , Impressão Tridimensional , Compostos Orgânicos Voláteis/análise , Local de TrabalhoRESUMO
Cooking oil smoke (COS) contains many harmful substances, such as particulate matter, formaldehyde, and phenyl esters. Currently, commercial COS treatment equipment is expensive and requires a large space. Furthermore, a large amount of agricultural waste is generated and is mainly burned onsite, producing large amounts of greenhouse gases and air pollutants. This waste could be reused as a precursor for biochar and activated carbon. Therefore, this research used saccharification and catalytic hydrothermal carbonization to process rice straw and produce compact carbon-based filters (steel wool-C) for removing cooking-induced pollutants. Scanning electron microscopy indicated that carbon layers were coated on the steel wool. The Brunauer-Emmett-Teller surface area of the carbon filter was 71.595 m2/g, 43 times larger than that of steel wool. The steel wool filter removed 28.9%-45.4% of submicron aerosol particles. Adding a negative air ionizer (NAI) to the filter system enhanced the particle removal efficiency by 10%-25%. The removal efficiency of total volatile organic compounds was 27.3%-37.1% with the steel wool filter, but 57.2%-74.2% with the carbon-containing steel wool filter, and the NAI improved the removal efficiency by approximately 1%-5%. The aldehyde removal efficiency of the carbon filter with NAI was 59.0%-72.0%. Conclusively, the compact steel wool-C and NAI device could be promising COS treatment equipment for households and small eateries.