Identification of several African swine fever virus replication inhibitors by screening of a library of FDA-approved drugs.

African swine fever (ASF) caused by African swine fever virus (ASFV) is a highly infectious and lethal swine disease. Currently, there is only one novel approved vaccine and no antiviral drugs for ASFV. In the study, a high-throughput screening of an FDA-approved drug library was performed to identify several drugs against ASFV infection in primary porcine alveolar macrophages. Triapine and cytarabine hydrochloride were identified as ASFV infection inhibitors in a dose-dependent manner. The two drugs executed their antiviral activity during the replication stage of ASFV. Furthermore, molecular docking studies showed that triapine might interact with the active center Fe2+ in the small subunit of ASFV ribonucleotide reductase while cytarabine hydrochloride metabolite might interact with three residues (Arg589, Lys593, and Lys631) of ASFV DNA polymerase to block new DNA chain extension. Taken together, our results suggest that triapine and cytarabine hydrochloride displayed significant antiviral activity against ASFV in vitro.

Antibiotic resistance of Helicobacter pylori in Nanjing, China: a cross-section study from 2018 to 2023.

Background: The increasing prevalence of antibiotic resistance in cases of Helicobacter pylori (H. pylori) infection has emerged as a significant global issue. This study offers a comprehensive examination of the alterations in drug resistance exhibited by H. pylori in the Nanjing region of China during the preceding five years. Another important objective is to investigate the influence of levofloxacin medication history on genotypic and phenotypic resistance. Methods: This research screened 4277 individuals diagnosed with H. pylori infection between April 2018 and May 2023. The phenotype and genotypic resistance were evaluated using the Kirby-Bauer disk diffusion and PCR method. Results: The most recent primary resistance rates for metronidazole, clarithromycin, levofloxacin, amoxicillin, furazolidone, and tetracycline were recorded at 77.23% (2385/3088), 37.24% (1150/3088), 27.72% (856/3088), 0.52% (16/3088), 0.19% (6/3088), and 0.06% (2/3088), respectively. For the recent five years, we observed a notable upsurge in the rate of metronidazole resistance and a slight elevation of clarithromycin and levofloxacin resistance. The documented resistance rates to single-drug, dual-drug, triple-drug, and quadruple-drug regimens were 35.39%, 28.32%, 25.72%, and 0.21%, respectively. The prevalence of multidrug-resistant strains escalated, rising from 37.96% in 2018 to 66.22% in 2023. The rate of phenotypic and genotypic resistance rate (57.10% and 65.57%) observed in strains obtained from patients without a levofloxacin treatment history was significantly lower than the rate in strains obtained from those with a history of levofloxacin treatment (88.73% and 94.74%). The prevailing gyrA mutations were primarily N87K (52.35%, 345/659), accompanied by D91N (13.96%, 92/659), and closely followed by D87G (10.77%, 71/659). For gyrA mutations, the 91-amino acid mutants exhibit a higher likelihood of discrepancies between phenotypic and genotypic resistance than the 87-amino acid mutants. Conclusion: The extent of antibiotic resistance within H. pylori remains substantial within the Nanjing region. If levofloxacin proves ineffective in eradicating H. pylori during the initial treatment, its use in subsequent treatments is discouraged. The employment of levofloxacin resistance genotype testing can partially substitute conventional antibiotic sensitivity testing. Notably, predicting phenotypic resistance of levofloxacin through PCR requires more attention to the mutation type of gyrA to improve prediction accuracy.

Diagnostic accuracy of a novel optical coherence tomography-based fractional flow reserve algorithm for assessment of coronary stenosis significance.

BACKGROUND: This study aimed to introduce a novel optical coherence tomography-derived fractional flow reserve (FFR) computational approach and assess the diagnostic performance of the algorithm for assessing physiological function. METHODS: The fusion of coronary optical coherence tomography and angiography was used to generate a novel FFR algorithm (AccuFFRoct) to evaluate functional ischemia of coronary stenosis. In the current study, a total of 34 consecutive patients were included, and AccuFFRoct was used to calculate the FFR for these patients. With the wire-measured FFR as the reference standard, we evaluated the performance of our approach by accuracy, sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV). RESULTS: Per vessel accuracy, sensitivity, specificity, PPV, and NPV for AccuFFRoct in identifying hemodynamically significant coronary stenosis were 93.8%, 94.7%, 92.3%, 94.7%, and 92.3%, respectively, were found. Good correlation (Pearson's correlation coefficient r = 0.80, p < 0.001) between AccuFFRoct and FFR was observed. The Bland-Altman analysis showed a mean difference value of -0.037 (limits of agreement: -0.189 to 0.115). The area under the receiver-operating characteristic curve (AUC) of AccuFFRoct in identifying physiologically significant stenosis was 0.94, which was higher than the minimum lumen area (MLA, AUC = 0.91) and significantly higher than the diameter stenosis (%DS, AUC = 0.78). CONCLUSIONS: This clinical study shows the efficiency and accuracy of AccuFFRoct for clinical implementation when using invasive FFR measurement as a reference. It could provide important insights into coronary imaging superior to current methods based on the degree of coronary artery stenosis.

Total Glucosides of Paeony Ameliorate Myocardial Injury in Chronic Heart Failure Rats by Suppressing PARP-1.

Total glucosides of paeony (TGP) have a potential protective effect on chronic heart failure (CHF) rats, but the mechanism remains unclear. PARP inhibition prevents the decrease in myocardial contractility. Therefore, we aim to investigate the effects and mechanisms of TGP on CHF and the role of PARP-1 in CHF. Left anterior descending ligation rats and adriamycin-treated H9C9 cells were used as CHF models, and captopril as a positive control for in vivo experiments. We found that TGP alleviated myocardial remodeling and improved cardiac morphology and function. TGP also reduced myocardial apoptosis and autophagy, decreased inflammatory factor release, and inhibited the PARP-1 and NF-κB proteins. Through cell transfection, we found that PAPR-1 knockdown inhibited NF-κB nuclear translocation. Additionally, TGP inhibited apoptosis, autophagy, and inflammation in CHF cells, while PARP-1 overexpression partially antagonized them. In conclusion, TGP has the potential to improve CHF and PARP-1 may be a potential target.

A novel signaling transduction pathway of melatonin on lactose synthesis in cows via melatonin receptor 1 (MT1) and prolactin receptor (PRLR).

In the current study, we explored the relationship between melatonin and lactose synthesis in in vivo and in vitro conditions. We found that long-term melatonin feeding to the dairy cows significantly reduced the milk lactose content in a dose dependent manner. This lactose reduction was not associated with a negative energy balance, since melatonin treatment did not alter the fat, glucose, or protein metabolisms of the cows. To identify the potential molecular mechanisms, the cow's mammary epithelial cells were cultured for gene expression analysis. The results showed that the effect of melatonin on lactose reduction was mediated by its receptor MT1. MT1 activation downregulated the mRNA expression of the prolactin receptor gene (PRLR), which then suppressed the gene expression of SLC35B1. SLC35B1 is a galactose transporter and is responsible for the transportation of galactose to Golgi apparatus for lactose synthesis. Its suppression reduced the lactose synthesis and the milk lactose content. The discovery of this signal transduction pathway of melatonin on lactose synthesis provides a novel aspect of melatonin's effect on carbohydrate metabolism in cows and maybe also in other mammals, including humans.

Calculation of excited states of monolayer TPPA-COF based on first principles.

Two-dimensional covalent organic frameworks (COFs) have always been a hot topic in condensed matter physics. Herein, the first 100 excited states of the TPPA-COF are calculated to investigate the optical absorption properties of the materials in the interval. The stable molecular structure of monolayer TPPA-COF is obtained by first-principles calculation, which can be regarded as a hexagon with an aperture size of 18.25 Å. By means of the band structure and density of state analysis, it is found that the monolayer band gap width of the TPPA-COF is 1.52 eV. All excited states of the TPPA-COF exhibit obvious pi → pi* (delocalized π to anti π) local excitation characteristics through analysing the spatial distribution of the electron-hole pairs of the 10 excited states with the highest oscillator strength among the first 100 excited states. In addition, the simulated UV-vis spectra show that the maximum absorption intensity of the TPPA-COF is about 357 684 mol-1 cm-1, indicating that the TPPA-COF is a potential light-absorbing material.

Intravascular Ultrasound-Based Fractional Flow Reserve for Predicting Prognosis after Percutaneous Coronary Intervention.

AccuFFRivus is an alternative to fractional flow reserve (FFR) based on intravascular ultrasound (IVUS) images for functional assessment of coronary stenosis. However, its prognostic impact in patients undergoing percutaneous coronary intervention (PCI) is still unclear. This retrospective study aimed to investigate the capability of AccuFFRivus in predicting prognosis. AccuFFRivus was calculated based on postoperative angiographic and IVUS images. Vessel-oriented clinical events (VOCE) at 2 years were recorded and analyzed. A total of 131 participants with 131 vessels were included in the study. VOCE occurred in 15 patients during 2-year follow-up. AccuFFRivus after PCI (post-AccuFFRivus) was significantly higher in the non-VOCE group than in the VOCE group (0.95 ± 0.03 vs. 0.91 ± 0.02, p < 0.001). Multivariate Cox regression showed that AccuFFRivus ≤ 0.94 was a strong independent predictor of VOCE during 2-year follow-up (hazard ratio 23.76, 95% confidence interval: 3.04-185.81, p < 0.001). The left panel displays the Receiver operating characteristics (ROC) curves of postoperative parameters (post-AccuFFRivus and post-MLA) versus vessel-oriented clinical events (VOCE) occurrence within 2-year follow-up. The right panel demonstrates Kaplan-Meier curves of VOCE stratified by the optimal cut-off of post-AccuFFRivus.

Dielectric Relaxation and Dielectric Switching Behaviors in (N,N-Diisopropylethylamine) Tetrachloroantimonate(III).

Dielectric switches have drawn renewed attention to the study of their many potential applications with the adjustable switch temperatures (Ts ). Herein, a novel antimony-based halide semiconductor, (N,N-diisopropylethylamine) tetrachloroantimonate ((DIPEA)SbCl4 , DIPEA+ =N,N-diisopropylethylamine), with dielectric relaxation behavior and dielectric switches has been successfully synthesized. This compound, consisting of coordinated anion S b C l 4 ∞ - ${{\left[{{\rm S}{\rm b}{\rm C}{\rm l}}_{4}\right]}_{\infty }^{-}}$ chains and isolated DIPEA+ cations, undergoes an isostructural order-disorder phase transition and shows a step-like dielectric anomaly, which can function as a frequency-tuned dielectric switch with highly adjustable switch temperature (Ts ). Variable-temperature single-crystal structure analyses and first-principles molecular dynamics simulations give information about the general mechanisms of molecular dynamics. This work enriches the dielectric switch family and proves that hybrid metal halides are promising candidates for switchable physical or chemical properties.

Breast Magnetic Resonance Imaging Can Predict Ki67 Discordance Between Core Needle Biopsy and Surgical Samples.

BACKGROUND: Disagreement in assessments of Ki67 expression based on core-needle biopsy and matched surgical samples complicates decisions in the treatment of breast cancer. PURPOSE: To examine whether preoperative breast MRI could be useful in predicting Ki67 discordance between core-needle biopsy and surgical samples. STUDY TYPE: Retrospective. POPULATION: Three hundred and sixty-five breast cancer patients with MRI scans and having both core-needle biopsy and surgical samples from 2017 to 2019. FIELD STRENGTH/SEQUENCE: 3.0 T, T2-weighted iterative decomposition of water and fat with echo asymmetry and least squares estimation sequence, diffusion-weighted sequence using b-values 0/1000, dynamic contrast enhanced image by volume imaged breast assessme NT. ASSESSMENT: We collected clinicopathologic variables and preoperative MRI features (tumor size, lesion type, shape of mass, spiculated margin, internal enhancement, peri-tumoral edema, intra-tumoral necrosis, multifocal/multicentric, apparent diffusion coefficient [ADC] minimum, ADC mean, ADC maximum, ADC difference). STATISTICAL TESTS: K-means clustering, multivariable logistic regression, receiver operating characteristic curve. RESULTS: Sixty-one patients showed Ki67 discordance and 304 patients show Ki67 concordance according to our definition using K-means clustering. Multivariable regression analysis showed that the following parameters were independently associated with Ki67 discordance: peri-tumoral edema, odds ratio (OR) 2.662, 95% confidence interval (CI) 1.432-4.948; ADCmin ≤ 0.829 × 10-3  mm2 /sec, OR 2.180, 95% CI 1.075-4.418; and ADCdiff > 0.317 × 10-3  mm2 /sec, OR 3.365, 95% CI 1.698-6.669. This multivariable model resulted in an AUC of 0.758 (95% CI 0.711-0.802) with sensitivity and specificity being 0.803 and 0.621, respectively. CONCLUSION: Presence of peri-tumoral edema, smaller ADCmin and greater ADCdiff in preoperative breast MRI may indicate high risk of Ki67 discordance between core-needle biopsy and surgical samples. For patients with these MRI-based risk factors, clinicians should not rely on Ki67 assessment only from core-needle biopsy.

Durable and Nontoxic Natural Rubber-Based Composites with Antibacterial Properties.

Natural rubber latex (NRL) has prophylactic properties and is used to make pathogen-isolating products like condoms and surgical gloves. However, obtaining NRL and casting it into durable products are challenging. Consequently, progress in the research and development of medical NRL products has been slow. This study aims to strengthen NR and induce it with bactericidal properties. In this regard, we introduce inorganic whiskers into the NRL and synthesize whiskers/NR composites with strong mechanical and antibacterial properties. The method proposed herein is a template method, which can rapidly and efficiently reveal the antibacterial effect of the composite latex, providing convenience for research institutions and factories studying antibacterial latex. A complete system is established for studying the antibacterial medical NRL, and a precedent is set for the relevant products.

Impact of Climate Change on Indoor Air Quality: A Review.

Climate change can affect the indoor environment due to heat and mass transfers between indoor and outdoor environments. To mitigate climate change impacts and adapt buildings to the changing environment, changes in building characteristics and occupants' behavior may occur. To characterize the effects of climate change on indoor air quality (IAQ), the present review focused on four aspects: (1) experimental and modeling studies that relate IAQ to future environmental conditions, (2) evolution of indoor and outdoor air concentrations in the coming years with regard to temperature rise, (3) climate change mitigation and adaptation actions in the building sector, and (4) evolution of human behavior in the context of climate change. In the indoor environment, experimental and modeling studies on indoor air pollutants highlighted a combined effect of temperature and relative humidity on pollutant emissions from indoor sources. Five IAQ models developed for future climate data were identified in the literature. In the outdoor environment, the increasing ambient temperature may lead directly or indirectly to changes in ozone, particle, nitrogen oxides, and volatile organic compound concentrations in some regions of the world depending on the assumptions made about temperature evolution, anthropogenic emissions, and regional regulation. Infiltration into buildings of outdoor air pollutants is governed by many factors, including temperature difference between indoors and outdoors, and might increase in the years to come during summer and decrease during other seasons. On the other hand, building codes in some countries require a higher airtightness for new and retrofitted buildings. The building adaptation actions include the reinforcement of insulation, implementation of new materials and smart building technologies, and a more systematic and possibly longer use of air conditioning systems in summer compared to nowadays. Moreover, warmer winters, springs, and autumns may induce an increasing duration of open windows in these seasons, while the use of air conditioning in summer may reduce the duration of open windows.

Fabrication and DFT Calculation of Amine-Functionalized Metal-Organic Framework as a Turn-On Fluorescence Sensor for Fe3+ and Al3+ Ions.

Due to their important role in biological systems, it is urgent to develop a material that can rapidly and sensitively detect the concentration of Fe3+ and Al3+ ions. In this work, a brand-new CdII-based metal-organic framework [Cd(BTBD)2(AIC)]n (JXUST-18, BTBD = 4,7-bis(1H-1,2,4-triazol-1-yl)-2,1,3-benzothiadiazole and H2AIC = 5-aminoisophthalic acid) with a 4-connected sql topology was designed and synthesized. The symmetrical CdII centers are linked by AIC2- ligands with µ3-η1:η1:η1:η1 coordination mode to form a [Cd2(COO)2] secondary building unit (SBU). The contiguous SBUs are further connected by BTBD ligands to form a two-dimensional (2D) layer structure. JXUST-18 can remain stable in aqueous solutions with pH values of 3-12 or in boiling water. Luminescent experiments suggest that JXUST-18 displays more than eightfold fluorescence enhancement in the presence of Fe3+ and Al3+ ions, and the detection limits for Fe3+ and Al3+ ions are 0.196 and 0.184 µM, respectively. Furthermore, the change in luminescence color is uncomplicatedly distinguishable with the naked eye under ultraviolet light at 365 nm. In addition, a series of devices based on JXUST-18 including fluorescence test strips, lamp beads, and composite films were developed to detect metal ions via visual changes in luminescence color. Significantly, JXUST-18 is a rare MOF-based turn-on fluorescence sensor for the detection of Fe3+ ions. The theoretical calculation suggests that the complexation of Fe3+/Al3+ ions and the -NH2 group contributes to fluorescence enhancement.

Super solvent of cellulose with extra high solubility for tunable cellulose structure with versatile application.

Low-temperature two-step concentrated H2SO4 was discovered to be a solvent with high cellulose solubility [>300 g/L (17 wt%)], fast cellulose dissolution, high regeneration yield (>0.92 g/g), and cellulose being mouldable during regeneration. The superior performance was enabled by the much better compatibility of cellulose with lower concentrated H2SO4 at low temperature, compared with that of high concentrated H2SO4. The regenerated cellulose was characterized by mostly unchanged composition and highly tunable degree of polymerization (DP). The H2SO4 starting content, cotton fibre temperature, dissolution temperature, regeneration temperature, regeneration bath and storage time were factors determining the DP of regenerated cellulose, which could be equivalent to 4-90 % of the original cotton. These advantages of the solvent enabled versatile application in fabrication of extra strong cellulose hydrogels, manufacture of strong cellulose fibres, preparation of various homogenous composites which would be prepared with much more difficulty by using other solvents, and facile manufacture of cellooligosaccharides.

PTBP-1 and TNF-α/NF-κB are involved in repair mechanisms of human umbilical cord mesenchymal stem cell transplantation in mice with spinal cord injury.

OBJECTIVES: To explore the possible mechanism of human umbilical cord mesenchymal stem cell (hUC-MSC) transplantation in mice after spinal cord hemisection. METHODS: Thoracic spinal cord hemisection injuries were performed on adult female Kunming mice. The mice with spinal cord injury (SCI) were injected with hUC-MSCs suspended in normal saline, while the control mice received an equal volume of normal saline. The histological HE staining and Nissl staining were performed 4 and 8 weeks after hUC-MSC transplantation in SCI mice. The Basso-Beattie-Bresnahan (BBB) locomotor rating scale was used to assess functional recovery after SCI. Western blotting was performed to determine the protein expressions. RESULTS: hUC-MSCs transplantation decreased cavitation and tissue loss and increased the number of Nissl bodies in the damaged areas of the spinal cord after 4 and 8 weeks. The BBB locomotor performance of the transplanted mice was significantly improved (P<0.01). The wet weight of the injured side of the gastrocnemius muscle was significantly higher in the transplant group than that in the control group. Western blotting showed that TUJ1 and Olig2 expressions were significantly higher in hUC-MSC-grafted mice than those in vehicle controls. Three days after hUC-MSC transplantation, the expressions of TNF-α and NF-κB were higher in MSC-grafted mice than those in vehicle controls. However, 4 weeks after stem cell transplantation, the expressions of these two factors decreased in hUC-MSC-grafted mice compared with those in the vehicle controls. At 8 weeks after hUC-MSC transplantation, the expression of PTBP-1 was decreased in hUC-MSC-grafted mice compared with that in vehicle controls. CONCLUSIONS: hUC-MSC transplantation can protect neuron survival, promote myelin repair, and control glial scar formation in SCI mice.

Modeling Primary Emissions of Chemicals from Liquid Products Applied on Indoor Surfaces.

Liquid products applied on material surfaces and human skin, including many household cleaning products and personal care products, can lead to intermittent emissions of chemicals and peak concentrations in indoor air. The existing case-based models do not allow inter-comparison of different use scenarios and emission mechanisms. In this context, the present work developed a mechanistic model based on mass transfer theories, which allowed emissions into the air from the liquid product to be characterized. It also allowed for diffusion into the applied surface during product use and re-emission from the applied surface after the depletion of the liquid product. The model was validated using literature data on chemical emissions following floor cleaning and personal care product use. A sensitivity analysis of the model was then conducted. The percentage of the chemical mass emitted from the liquid to the air varied from 45% (applied on porous material) to 99% (applied on human skin), and the rest was absorbed into the applied material/skin. The peak gas-phase concentration, the time to reach the peak concentration, and the percentage of the liquid-to-air emission depended significantly on the chemical's octanol/gas and material/gas partition coefficients and the diffusion coefficient of the chemical in the applied material/skin.

Measurement methods and impact factors for the key parameters of VOC/SVOC emissions from materials in indoor and vehicular environments: A review.

The emissions of volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) from indoor building and vehicle cabin materials can adversely affect human health. Many mechanistic models to predict the VOC/SVOC emission characteristics have been proposed. Nowadays, the main obstacle to accurate model prediction is the availability and reliability of the physical parameters used in the model, such as the initial emittable concentration, the diffusion coefficient, the partition coefficient, and the gas-phase SVOC concentration adjacent to the material surface. The purpose of this work is to review the existing methods for measuring the key parameters of VOCs/SVOCs from materials in both indoor and vehicular environments. The pros and cons of these methods are analyzed, and the available datasets found in the literature are summarized. Some methods can determine one single key parameter, while other methods can determine two or three key parameters simultaneously. The impacts of multiple factors (temperature, relative humidity, loading ratio, and air change rate) on VOC/SVOC emission behaviors are discussed. The existing measurement methods span very large spatial and time scales: the spatial scale varies from micro to macro dimensions; and the time scale in chamber tests varies from several hours to one month for VOCs, and may even span years for SVOCs. Based on the key parameters, a pre-assessment approach for indoor and vehicular air quality is introduced in this review. The approach uses the key parameters for different material combinations to pre-assess the VOC/SVOC concentrations or human exposure levels during the design stage of buildings or vehicles, which can assist designers to select appropriate materials and achieve effective source control.

The Variance of Photophysical Properties of Tetraphenylethene and Its Derivatives during Their Transitions from Dissolved States to Solid States.

The study of aggregation-induced emission luminogens (AIEgens) shows promising perspectives explored in lighting, optical sensors, and biological therapies. Due to their unique feature of intense emissions in aggregated solid states, it smoothly circumvents the weaknesses in fluorescent dyes, which include aggregation-caused quenching of emission and poor photobleaching character. However, our present knowledge of the AIE phenomena still cannot comprehensively explain the mechanism behind the substantially enhanced emission in their aggregated solid states. Herein, to systematically study the mechanism, the typical AIEgens tetraphenylethene (TPE) was chosen, to elucidate its photophysical properties, the TPE in THF/H2O binary solvents, TPE in THF solvents depending on concentration, and the following direct conversion from a dissolved state to a precipitated solid state were analyzed. Moreover, the TPE derivatives were also investigated to supply more evidence to better decipher the generally optical behaviors of TPE and its derivatives. For instance, the TPE derivative was homogeneously dispersed into tetraethyl orthosilicate to monitor the variance of photophysical properties during sol-gel processing. Consequently, TPE and its derivatives are hypothesized to abide by the anti-Kasha rule in dissolved states. In addition, the factors primarily influencing the nonlinear emission shifting of TPE and its derivatives are also discussed.

[Progress in replicative senescence of mesenchymal stem cells regulated by microenvironment].

Mesenchymal stem cells (MSCs) are a class of pluripotent cells that can self-renew and differentiate. Numerous studies have shown that MSCs have important roles in areas such as regenerative medicine and tissue engineering. However, it is worth noting that MSCs will gradually age during long-term in vitro expansion with decreased stemness such as weakened migration ability, slowed proliferation rate and decreased differentiation potential, which greatly hinders the application of MSCs. Currently, the microenvironment for cell growth is recognized as one of the factors causing senescence in MSCs. Recent studies point out that the latest technologies such as exogenous administration, oxygen concentration regulation and extracellular matrix (ECM) construction can delay stem cell senescence by simulating or regulating the microenvironment. Here, we review the current knowledge of the characteristics and molecular mechanisms of senescent MSCs and microenvironment strategies to maintain MSCs stemness, which can provide a reference for future large-scale application of MSCs preparations in tissue engineering and clinical studies.

Human umbilical cord-derived mesenchymal stem cells promote repair of neonatal brain injury caused by hypoxia/ischemia in rats.

Administration of human umbilical cord-derived mesenchymal stem cells (hUC-MSCs) is believed to be an effective method for treating neurodevelopmental disorders. In this study, we investigated the possibility of hUC-MSCs treatment of neonatal hypoxic/ischemic brain injury associated with maternal immune activation and the underlying mechanism. We established neonatal rat models of hypoxic/ischemic brain injury by exposing pregnant rats to lipopolysaccharide on day 16 or 17 of pregnancy. Rat offspring were intranasally administered hUC-MSCs on postnatal day 14. We found that polypyrimidine tract-binding protein-1 (PTBP-1) participated in the regulation of lipopolysaccharide-induced maternal immune activation, which led to neonatal hypoxic/ischemic brain injury. Intranasal delivery of hUC-MSCs inhibited PTBP-1 expression, alleviated neonatal brain injury-related inflammation, and regulated the number and function of glial fibrillary acidic protein-positive astrocytes, thereby promoting plastic regeneration of neurons and improving brain function. These findings suggest that hUC-MSCs can effectively promote the repair of neonatal hypoxic/ischemic brain injury related to maternal immune activation through inhibition of PTBP-1 expression and astrocyte activation.

Efficient production and characterization of immunogenic HEV-PCV2 chimeric virus-like particles.

Zoonotic hepatitis E virus (HEV) infection is an emerging global public health concern. It is usually transmitted to humans from domestic pigs (main host). Since virus-like particles (VLPs) exhibit unique structural and immunological characteristics that make them of momentous applications in vaccine development, the purpose of the present study was the production of immunogenic chimeric VLPs as vaccine candidates for the control of zoonotic HEV in its main host and the prevention of porcine circovirus associated disease, a multi-factorial disease with major economic repercussions on global pig industry. An immuno-informatics approach was applied for the design and screening of new chimeric antigens presenting the dominant immunogenic domains of both HEV and porcine circovirus 2 (PCV2). Then, using molecular cloning techniques, the chimeric proteins were expressed in Escherichia coli. After purification, full characterization of the physicochemical, morphological, and immunological properties of the target proteins has been conducted. The chimeric immunogens were successfully overexpressed and after the optimization of the expression conditions, 5 chimeric proteins were efficiently purified under native conditions. The purified HEV-PCV2 chimeric proteins were found thermo-stable and able to self-assemble into spherical virus-like particles. Four HEV-PCV2 chimeric proteins have displayed optimal antigenicity and immunogenicity properties, with the nPCV2cp-p166 chimeric immunogen slightly outranking the other designed proteins. In conclusion, this study reports the production of stable HEV-PCV2 chimeric VLPs that exhibited optimal antigenicity and immunogenicity and thus with potential applications in diagnostics and vaccine development. Besides, this study provides a reproducible approach for the design, assessment, and production of chimeric antigens.