Label-Free and Ultrasensitive Detection of Cartilage Acidic Protein 1 in Osteoarthritis Using a Single-Walled Carbon Nanotube Field-Effect Transistor Biosensor.

Osteoarthritis (OA), a prevalent degenerative joint disease, significantly affects the well-being of afflicted individuals and compromises the standard functionality of human joints. The emerging biomarker, Cartilage acidic protein 1 (CRTAC1), intricately associates with OA initiation and serves as a prognostic indicator for the trajectory toward joint replacement. However, existing diagnostic methods for CRTAC1 are hampered by the limited abundance, thus restricting the precision and specificity. Herein, a novel approach utilizing a single-walled carbon nanotube field-effect transistor (SWCNTs FET) biosensor is reported for the direct label-free detection of CRTAC1. High-purity semiconducting carbon nanotube films, functionalized with antibodies of CRTAC1, provide excellent electrical and sensing properties. The SWCNTs FET biosensor exhibits high sensitivity, notable reproducibility, and a wide linear detection range (1 fg/mL to 100 ng/mL) for CRTAC1 with a theoretical limit of detection (LOD) of 0.2 fg/mL. Moreover, the SWCNTs FET biosensor is capable of directly detecting human serum samples, showing excellent sensing performance in differentiating clinical samples from OA patients and healthy populations. Comparative analysis with traditional enzyme-linked immunosorbent assay (ELISA) reveals that the proposed biosensor demonstrates faster detection speeds, higher sensitivity/accuracy, and lower errors, indicating high potential for the early OA diagnosis. Furthermore, the SWCNTs FET biosensor has good scalability for the combined diagnosis and measurement of multiple disease markers, thereby significantly expanding the application of SWCNTs FETs in biosensing and clinical diagnostics.

Suppressing the P2 - O2 phase transformation and Na+/vacancy ordering of high-voltage manganese-based P2-type cathode by cationic codoping.

High-voltage and low-cost manganese-based P2-type oxides show real promise as promising cathode for sodium-ion batteries (SIBs). But the P2 - O2 phase transformation and Na+/vacancy ordering results in the inferior structural stability and Na+ diffusion coefficient, which further leads to rapid decay of capacity and poor rate capability. Herein, in consideration of the synergetic effects of dual cationic doping, electrochemically inactive Li+ and active Co3+ codoping are proposed to solve the above issues. The novel two-step doping strategy, Co doping during synthesis of precursors via coprecipitation reaction followed by Li doping during solid-state reaction, are rationally developed. As anticipated, the Li/Co codoped P2-type oxide exhibits the absence of P2 - O2 phase transformation and Na+/vacancy disordering, which gives rise to an outstanding cycling stability (86.7% capacity retention within 100 cycles at 0.1C) and high-rate capability (reversible capacity of 109 mAh g-1 even at 10C). In addition, the full-cells composed of the codoped P2-type positive and hard carbon negative show high energy-density, good lifespan and high-rate property. This proposed cationic codoping provides an effective and scalable tactics for modulating the structural properties of high-voltage P2-type cathodes for advanced SIBs.

Simple Synthesis of Cobalt Carbonate Hydroxide Hydrate and Reduced Graphene Oxide Hybrid Structure for High-Performance Room Temperature NH3 Sensor.

A novel hybrid structure sensor based on cobalt carbonate hydroxide hydrate (CCHH) and reduced graphene oxide (RGO) was designed for room temperature NH3 detection. This hybrid structure consisted of CCHH and RGO (synthesized by a one-step hydrothermal method), in which RGO uniformly dispersed in CCHH, being used as the gas sensing film. The resistivity of the hybrid structure was highly sensitive to the changes on NH3 concentration. CCHH in the hybrid structure was the sensing material and RGO was the conductive channel material. The hybrid structure could improve signal-to-noise ratio (SNR) and the sensitivity by obtaining the optimal mass proportion of RGO, since the proportion of RGO was directly related to sensitivity. The gas sensor with 0.4 wt% RGO showed the highest gas sensing response reach to 9% to 1 ppm NH3. Compared to a conventional gas sensor, the proposed sensor not only showed high gas sensing response at room temperature but also was easy to achieve large-scale production due to the good stability and simple synthesis process.

A Reduced GO-Graphene Hybrid Gas Sensor for Ultra-Low Concentration Ammonia Detection.

A hybrid structure gas sensor of reduced graphene oxide (RGO) decorated graphene (RGO-Gr) is designed for ultra-low concentration ammonia detection. The resistance value of the RGO-Gr hybrid is the indicator of the ammonia concentration and controlled by effective charge transport from RGO to graphene after ammonia molecule adsorption. In this hybrid material, RGO is the adsorbing layer to catch ammonia molecules and graphene is the conductive layer to effectively enhance charge/electron transport. Compared to a RGO gas sensor, the signal-to-noise ratio (SNR) of the RGO-Gr is increased from 22 to 1008. Meanwhile, the response of the RGO-Gr gas sensor is better than that of either a pristine graphene or RGO gas sensor. It is found that the RGO reduction time is related to the content of functional groups that directly reflect on the gas sensing properties of the sensor. The RGO-Gr gas sensor with 10 min reduction time has the best gas sensing properties in this type of sensor. The highest sensitivity is 2.88% towards 0.5 ppm, and the ammonia gas detection limit is calculated to be 36 ppb.

NiCo2O4-Based Supercapacitor Nanomaterials.

In recent years, the research on supercapacitors has ushered in an explosive growth, which mainly focuses on seeking nano-/micro-materials with high energy and power densities. Herein, this review will be arranged from three aspects. We will summarize the controllable architectures of spinel NiCo2O4 fabricated by various approaches. Then, we introduce their performances as supercapacitors due to their excellent electrochemical performance, including superior electronic conductivity and electrochemical activity, together with the low cost and environmental friendliness. Finally, the review will be concluded with the perspectives on the future development of spinel NiCo2O4 utilized as the supercapacitor electrodes.

One-Step Solvothermal Method to Prepare Ag/Cu2O Composite With Enhanced Photocatalytic Properties.

Ag/Cu2O microstructures with diverse morphologies have been successfully synthesized with different initial reagents of silver nitrate (AgNO3) by a facile one-step solvothermal method. Their structural and morphological characteristics were carefully investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), and the experimental results showed that the morphologies transformed from microcubes for pure Cu2O to microspheres with rough surfaces for Ag/Cu2O. The photocatalytic activities were evaluated by measuring the degradation of methyl orange (MO) aqueous solution under visible light irradiation. The photocatalytic efficiencies of MO firstly increased to a maximum and then decreased with the increased amount of AgNO3. The experimental results revealed that the photocatalytic activities were significantly influenced by the amount of AgNO3 during the preparation process. The possible reasons for the enhanced photocatalytic activities of the as-prepared Ag/Cu2O composites were discussed.

Fabrication and properties of ZnO/GaN heterostructure nanocolumnar thin film on Si (111) substrate.

Zinc oxide thin films have been obtained on bare and GaN buffer layer decorated Si (111) substrates by pulsed laser deposition (PLD), respectively. GaN buffer layer was achieved by a two-step method. The structure, surface morphology, composition, and optical properties of these thin films were investigated by X-ray diffraction, field emission scanning electron microscopy, infrared absorption spectra, and photoluminiscence (PL) spectra, respectively. Scanning electron microscopy images indicate that the flower-like grains were presented on the surface of ZnO thin films grown on GaN/Si (111) substrate, while the ZnO thin films grown on Si (111) substrate show the morphology of inclination column. PL spectrum reveals that the ultraviolet emission efficiency of ZnO thin film on GaN buffer layer is high, and the defect emission of ZnO thin film derived from Zni and Vo is low. The results demonstrate that the existence of GaN buffer layer can greatly improve the ZnO thin film on the Si (111) substrate by PLD techniques.