Trained innate immunity modulates osteoblast and osteoclast differentiation.

Macrophages are key regulators in bone repair and regeneration. Recent studies have shown that long-term epigenetic changes and metabolic shifts occur during specific immune training of macrophages that affect their functional state, resulting in heightened (trained) or reduced (tolerant) responses upon exposure to a second stimulus. This is known as innate immune memory. Here, we study the impact of macrophages' memory trait on osteoblast differentiation of human mesenchymal stromal cells (hMSCs) and osteoclast differentiation. An in vitro trained immunity protocol of monocyte-derived macrophages was employed using inactivated Candida albicans and Bacillus Calmette-Guérin (BCG) to induce a 'trained' state and Pam3CSK4 (PAM) and Lipopolysaccharides (LPS) to induce a 'tolerance' state. Macrophages were subsequently cocultured with hMSCs undergoing osteogenic differentiation during either resting (unstimulated) or inflammatory conditions (restimulated with LPS). Alkaline phosphatase activity, mineralization, and cytokine levels (TNF, IL-6, oncostatin M and SDF-1α) were measured. In addition, macrophages underwent osteoclast differentiation. Our findings show that trained and tolerized macrophages induced opposing results. Under resting conditions, BCG-trained macrophages enhanced ALP levels (threefold), while under inflammatory conditions this was found in the LPS-tolerized macrophages (fourfold). Coculture of hMSCs with trained macrophages showed mineralization while tolerized macrophages inhibited the process under both resting and inflammatory conditions. While osteoclast differentiation was not affected in trained-macrophages, this ability was significantly loss in tolerized ones. This study further confirms the intricate cross talk between immune cells and bone cells, highlighting the need to consider this interaction in the development of personalized approaches for bone regenerative medicine.

Effects of different obesogenic diets on joint integrity, inflammation and intermediate monocyte levels in a rat groove model of osteoarthritis.

Introduction: Obesogenic diets aggravate osteoarthritis (OA) by inducing low-grade systemic inflammation, and diet composition may affect OA severity. Here, we investigated the effect of diet on joint damage and inflammation in an OA rat model. Methods: Wistar-Han rats (n = 24) were fed a chow, a high-fat (HF) diet, or a high-fat/high-sucrose (HFS) for 24 weeks. OA was induced unilaterally 12 weeks after the diet onset by groove surgery, and compared to sham surgery or no surgical intervention (contralateral limb). Knee OA severity was determined by OARSI histopathology scoring system. At several timepoints monocyte populations were measured using flow cytometry, and joint macrophage response was determined via CD68 immunohistochemistry staining. Results: Groove surgery combined with HF or HFS diet resulted in higher OARSI scores, and both HF and HFS diet showed increased circulating intermediate monocytes compared to chow fed rats. Additionally, in the HFS group, minimal damage by sham surgery resulted in an increased OARSI score. HFS diet resulted in the largest metabolic dysregulation, synovial inflammation and increased CD68 staining in tibia epiphysis bone marrow. Conclusion: Obesogenic diets resulted in aggravated OA development, even with very minimal joint damage when combined with the sucrose/fat-rich diet. We hypothesize that diet-induced low-grade inflammation primes monocytes and macrophages in the blood, bone marrow, and synovium, resulting in joint damage when triggered by groove OA inducing surgery. When the metabolic dysregulation is larger, as observed here for the HFS diet, the surgical trigger required to induce joint damage may be smaller, or even redundant.

Deformable titanium for acetabular revision surgery: a proof of concept.

Custom-made triflange acetabular implants are increasingly used in complex revision surgery where supporting bone stock is diminished. In most cases these triflange cups induce stress-shielding. A new concept for the triflange is introduced that uses deformable porous titanium to redirect forces from the acetabular rim to the bone stock behind the implant and thereby reduces further stress-shielding. This concept is tested for deformability and primary stability.Three different designs of highly porous titanium cylinders were tested under compression to determine their mechanical properties. The most promising design was used to design five acetabular implants either by incorporating a deformable layer at the back of the implant or by adding a separate generic deformable mesh behind the implant. All implants were inserted into sawbones with acetabular defects followed by a cyclic compression test of 1800N for 1000 cycles.The design with a cell size of 4 mm and 0.2 mm strut thickness performed the best and was applied for the design of the acetabular implants. An immediate primary fixation was realized in all three implants with an incorporated deformable layer. One of the two implants with a separate deformable mesh needed fixation with screws. Cyclic tests revealed an average additional implant subsidence of 0.25 mm that occurred in the first 1000 cycles with minimal further subsidence thereafter.It is possible to realize primary implant fixation and stability in simulated large acetabular revision surgery using a deformable titanium layer behind the cup. Additional research is needed for further implementation of such implants in the clinic.

Automated Radiographic Measurements of Knee Osteoarthritis.

OBJECTIVE: Herewith, we report the development of Orthopedic Digital Image Analysis (ODIA) software that is developed to obtain quantitative measurements of knee osteoarthritis (OA) radiographs automatically. Manual segmentation and measurement of OA parameters currently hamper large-cohort analyses, and therefore, automated and reproducible methods are a valuable addition in OA research. This study aims to test the automated ODIA measurements and compare them with available manual Knee Imaging Digital Analysis (KIDA) measurements as comparison. DESIGN: This study included data from the CHECK (Cohort Hip and Cohort Knee) initiative, a prospective multicentre cohort study in the Netherlands with 1,002 participants. Knee radiographs obtained at baseline of the CHECK cohort were included and mean medial/lateral joint space width (JSW), minimal JSW, joint line convergence angle (JLCA), eminence heights, and subchondral bone intensities were compared between ODIA and KIDA. RESULTS: Of the potential 2,004 radiographs, 1,743 were included for analyses. Poor intraclass correlation coefficients (ICCs) were reported for the JLCA (0.422) and minimal JSW (0.299). The mean medial and lateral JSW, eminence height, and subchondral bone intensities reported a moderate to good ICC (0.7 or higher). Discrepancies in JLCA and minimal JSW between the 2 methods were mostly a problem in the lateral tibia plateau. CONCLUSIONS: The current ODIA tool provides important measurements of OA parameters in an automated manner from standard radiographs of the knee. Given the automated and computerized methodology that has very high reproducibility, ODIA is suitable for large epidemiological cohorts with various follow-up time points to investigate structural progression, such as CHECK or the Osteoarthritis Initiative (OAI).

Osteoimmunomodulatory GelMA/liposome coatings to promote bone regeneration of orthopedic implants.

Despite being the most widely used biomaterials in orthopedic surgery, metallic implants do not induce new bone growth because they are bioinert. Surface biofunctionalization of implants with immunomodulatory mediators is a recent approach to promote osteogenic factors that facilitate bone regeneration. Liposomes (Lip) can be used as a low-cost, efficient and simple immunomodulator to stimulate immune cells in favor of bone regeneration. Even though liposomal coating systems have been reported previously, their main disadvantage is their limited ability to preserve liposome integrity after drying. In order to address this issue, we developed a hybrid system in which liposomes could be embedded in a polymeric hydrogel namely gelatin methacryloyl (GelMA). Specifically, we have developed a novel versatile coating strategy using electrospray technology to coat implants with GelMA/Liposome without using adhesive intermediate layer. The two differently charged Lip (i.e., anionic and cationic) were blended with GelMA and coated via electrospray technology on the bone-implant surfaces. The results showed that the developed coating withstood mechanical stress during surgical replacement, and Lip inside GelMA coating stayed intact in different storage conditions for a minimum of 4 weeks. Surprisingly, bare Lip, either cationic or anionic, improved the osteogenesis of human Mesenchymal Stem Cells (MSCs) by inducing pro-inflammatory cytokines, even at a low dosage of Lip released from the GelMA coating. More importantly, we showed that the inflammatory response could be fine-tuned by selecting the Lip concentration, Lip/hydrogel ratio, and coating thickness to determine the timing of the release such that we can accommodate different clinical needs. These promising results pave the way to use these Lip coatings to load different types of therapeutic cargo for bone-implant applications.

Test-retest precision and longitudinal cartilage thickness loss in the IMI-APPROACH cohort.

OBJECTIVE: To investigate the test-retest precision and to report the longitudinal change in cartilage thickness, the percentage of knees with progression and the predictive value of the machine-learning-estimated structural progression score (s-score) for cartilage thickness loss in the IMI-APPROACH cohort - an exploratory, 5-center, 2-year prospective follow-up cohort. DESIGN: Quantitative cartilage morphology at baseline and at least one follow-up visit was available for 270 of the 297 IMI-APPROACH participants (78% females, age: 66.4 ± 7.1 years, body mass index (BMI): 28.1 ± 5.3 kg/m2, 55% with radiographic knee osteoarthritis (OA)) from 1.5T or 3T MRI. Test-retest precision (root mean square coefficient of variation) was assessed from 34 participants. To define progressor knees, smallest detectable change (SDC) thresholds were computed from 11 participants with longitudinal test-retest scans. Binary logistic regression was used to evaluate the odds of progression in femorotibial cartilage thickness (threshold: -211 µm) for the quartile with the highest vs the quartile with the lowest s-scores. RESULTS: The test-retest precision was 69 µm for the entire femorotibial joint. Over 24 months, mean cartilage thickness loss in the entire femorotibial joint reached -174 µm (95% CI: [-207, -141] µm, 32.7% with progression). The s-score was not associated with 24-month progression rates by MRI (OR: 1.30, 95% CI: [0.52, 3.28]). CONCLUSION: IMI-APPROACH successfully enrolled participants with substantial cartilage thickness loss, although the machine-learning-estimated s-score was not observed to be predictive of cartilage thickness loss. IMI-APPROACH data will be used in subsequent analyses to evaluate the impact of clinical, imaging, biomechanical and biochemical biomarkers on cartilage thickness loss and to refine the machine-learning-based s-score. GOV IDENTIFICATION: NCT03883568.

The association between statistical shape modeling-defined hip morphology and features of early hip osteoarthritis in young adult football players: Data from the femoroacetabular impingement and hip osteoarthritis cohort (FORCe) study.

Objective: To explore the relationship between radiographic hip shape and features of early hip osteoarthritis (OA) on magnetic resonance imaging (MRI) in young male and female football players without radiographic hip OA. Design: We used baseline data from a cohort of symptomatic and asymptomatic football players aged 18-50 years. Hip shape was assessed on anteroposterior radiographs with statistical shape modeling (SSM) for men and women separately. Cartilage defects and labral tears were graded using the Scoring Hip Osteoarthritis with MRI (SHOMRI) system. We used logistic regression with generalized estimating equations to estimate associations between each hip shape variant, called shape modes, and cartilage defects or labral tears. Results: We included 229 participants (446 hips, 77.4% male). For each sex, 15 shape modes were analyzed. In men, three shape modes were associated with cartilage defects: adjusted odds ratios (aOR) 0.75 (95%CI 0.58-0.97) per standard deviation (SD) for mode 1; 1.34 (95%CI 1.05-1.69) per SD for mode 12; and 0.61 (95%CI 0.48-0.78) per SD for mode 15; and one also with labral tears: aOR 1.30 (95%CI 1.01-1.69) per SD for mode 12. These modes generally represented variations in the femoral neck and subtypes of cam morphology, with and without pincer morphology. For women, there was no evidence for associations with the outcomes. Conclusions: Several hip shape variants were associated with cartilage defects on MRI in young male football players. Specifically, one subtype of cam morphology was associated with both cartilage defects and labral tears. Hip shape was not associated with early OA features in women.

Current Evidence for Spinopelvic Characteristics Influencing Total Hip Arthroplasty Dislocation Risk.

BACKGROUND: Decreased pelvic mobility and pelvic retroversion may result from spinal degeneration and lead to changes in the orientation of the acetabular implant after total hip arthroplasty (THA). While multiple patient and surgery-related factors contribute to THA dislocations, there is increasing evidence that sagittal spinopelvic dynamics are relevant for THA stability. The aim of this systematic review was to assess the relationship between previously described sagittal spinopelvic characteristics and implant dislocations after primary THA. METHODS: A comprehensive literature search in the PubMed and Embase databases was conducted for studies reporting on spinopelvic morphology, alignment, pathology, or surgery and THA dislocations. Risk of bias was assessed using the MINORS criteria. Because of high heterogeneity in study methodology, a synthesis of best evidence was performed. Odds ratios (ORs), relative risks (RRs), and effect sizes (g) were calculated. RESULTS: Fifteen studies (1,007,900 THAs) with quality scores of 15 to 23 out of 24 were included. Nine different spinopelvic alignment parameters (8 studies, g = 0.14 to 2.02), spinal pathology (2 studies, OR = 1.9 to 29.2), and previous spinal fusion surgery (8 studies, OR = 1.59 to 23.7, RR = 3.0) were found to be related to THA dislocation. Conflicting results were found for another sagittal pelvic morphology parameter, pelvic incidence. CONCLUSIONS: Several sagittal spinopelvic patient characteristics were found to be related to THA dislocation, and the associated risks were greater than for other patient and surgery-related factors. Future research is needed to determine which of those characteristics and parameters should be taken into account in patients undergoing primary THA. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Controlled temperature-mediated curcumin release from magneto-thermal nanocarriers to kill bone tumors.

Systemic chemotherapy has lost its position to treat cancer over the past years mainly due to drug resistance, side effects, and limited survival ratio. Among a plethora of local drug delivery systems to solve this issue, the combinatorial strategy of chemo-hyperthermia has recently received attention. Herein we developed a magneto-thermal nanocarrier consisted of superparamagnetic iron oxide nanoparticles (SPIONs) coated by a blend formulation of a three-block copolymer Pluronic F127 and F68 on the oleic acid (OA) in which Curcumin as a natural and chemical anti-cancer agent was loaded. The subsequent nanocarrier SPION@OA-F127/F68-Cur was designed with a controlled gelation temperature of the shell, which could consequently control the release of curcumin. The release was systematically studied as a function of temperature and pH, via response surface methodology (RSM). The bone tumor killing efficacy of the released curcumin from the carrier in combination with the hyperthermia was studied on MG-63 osteosarcoma cells through Alamar blue assay, live-dead staining and apoptosis caspase 3/7 activation kit. It was found that the shrinkage of the F127/F68 layer stimulated by elevated temperature in an alternative magnetic field caused the curcumin release. Although the maximum release concentration and cell death took place at 45 °C, treatment at 41 °C was chosen as the optimum condition due to considerable cell apoptosis and lower side effects of mild hyperthermia. The cell metabolic activity results confirmed the synergistic effects of curcumin and hyperthermia in killing MG-63 osteosarcoma cells.

IL4-10 Fusion Protein Shows DMOAD Activity in a Rat Osteoarthritis Model.

OBJECTIVE: Ideally, disease-modifying osteoarthritis (OA) drugs (DMOAD) should combine chondroprotective, anti-inflammatory, and analgesic effects in a single molecule. A fusion protein of interleukin-4 (IL-4) and IL-10 (IL4-10 FP) possesses these combined effects. In this study, the DMOAD activity of rat IL4-10 FP (rIL4-10 FP) was tested in a rat model of surgically induced OA under metabolic dysregulation. DESIGN: rIL4-10 FP was produced with HEK293F cells. Bioactivity of purified rIL4-10 FP was determined in a whole blood assay. Male Wistar rats (n = 20) were fed a high-fat diet (HFD) to induce metabolic dysregulation. After 12 weeks, OA was induced according to the Groove model. Two weeks after OA induction, rats were randomly divided into 2 groups and treated with 10 weekly, intra-articular injections of either rIL4-10 FP (n = 10) or phosphate buffered saline (PBS; n = 10). Possible antibody formation was evaluated using ELISA, cartilage degeneration and synovial inflammation were evaluated by histology and mechanical allodynia was evaluated using the von Frey test. RESULTS: Intra-articular injections with rIL4-10 FP significantly reduced cartilage degeneration (P = 0.042) and decreased mechanical allodynia (P < 0.001) compared with PBS. Only mild synovial inflammation was found (nonsignificant), limiting detection of putative anti-inflammatory effects. Multiple injections of rIL4-10 FP did not induce antibodies against rIL4-10 FP. CONCLUSION: rIL4-10 FP showed chondroprotective and analgesic activity in a rat OA model with moderate cartilage damage, mild synovial inflammation, and pain. Future studies will need to address whether less frequent intra-articular injections, for example, with formulations with increased residence time, would also lead to DMOAD activity.

Novel high-intensive cholesterol-lowering therapies do not ameliorate knee OA development in humanized dyslipidemic mice.

OBJECTIVE: High systemic cholesterol levels have been associated with osteoarthritis (OA) development. Therefore, cholesterol lowering by statins has been suggested as a potential treatment for OA. We investigated whether therapeutic high-intensive cholesterol-lowering attenuated OA development in dyslipidemic APOE∗3Leiden.CETP mice. METHODS: Female mice (n = 13-16 per group) were fed a Western-type diet (WTD) for 38 weeks. After 13 weeks, mice were divided into a baseline group and five groups receiving WTD alone or with treatment: atorvastatin alone, combined with PCSK9 inhibitor alirocumab and/or ANGPTL3 inhibitor evinacumab. Knee joints were analysed for cartilage degradation, synovial inflammation and ectopic bone formation using histology. Aggrecanase activity in articular cartilage and synovial S100A8 expression were determined as markers of cartilage degradation/regeneration and inflammation. RESULTS: Cartilage degradation and active repair were significantly increased in WTD-fed mice, but cholesterol-lowering strategies did not ameliorate cartilage destruction. This was supported by comparable aggrecanase activity and S100A8 expression in all treatment groups. Ectopic bone formation was comparable between groups and independent of cholesterol levels. CONCLUSIONS: Intensive therapeutic cholesterol lowering per se did not attenuate progression of cartilage degradation in dyslipidemic APOE∗3Leiden.CETP mice, with minor joint inflammation. We propose that inflammation is a key feature in the disease and therapeutic cholesterol-lowering strategies may still be promising for OA patients presenting both dyslipidemia and inflammation.

Additively manufactured space-filling meta-implants.

The unprecedented properties of meta-biomaterials could pave the way for the development of life-lasting orthopedic implants. Here, we used non-auxetic meta-biomaterials to address the shortcomings of the current treatment options in acetabular revision surgery. Due to the severe bone deficiencies and poor bone quality, it can be very challenging to acquire adequate initial implant stability and long-term fixation. More advanced treatments, such as patient-specific implants, do guarantee the initial stability, but are formidably expensive and may eventually fail due to stress shielding. We, therefore, developed meta-implants furnished with a deformable porous outer layer. Upon implantation, this layer plastically deforms into the defects, thereby improving the initial stability and homogeneously stimulating the surrounding bone. We first studied the space-filling behavior of additively manufactured pure titanium lattices, based on six different unit cells, in a compression test complemented with full-field strain measurements. The diamond, body-centered cubic, and rhombic dodecahedron unit cells were eventually selected for the design of the deformable porous outer layer. Each design came in three different relative density profiles, namely maximum (MAX), functionally graded (FG), and minimum (MIN). After their compression in bone-mimicking molds with simulated acetabular defects, the space-filling behavior of the implants was evaluated using load-displacement curves, micro-CT images, and 3D reconstructions. The meta-implants with an FG diamond infill exhibited the most promising space-filling behavior. However, the required push-in forces exceed the impact forces currently applied in surgery. Future research should, therefore, focus on design optimization, to improve the space-filling behavior and to facilitate the implantation process for orthopedic surgeons. STATEMENT OF SIGNIFICANCE: Ideally, orthopedic implants would last for the entire lifetime of the patient. Unfortunately, they rarely do. Critically sized defects are a common sight in the revision of acetabular cups, and rather difficult to treat. The permanent deformation of lattice structures can be used to create shape-morphing implants that would fill up the defect site, and thereby restore the physiological loading conditions. Bending-dominated structures were incorporated in the porous outer layer of the space-filling meta-implants for their considerable lateral expansion in response to axial compression. A functionally graded density offered structural integrity at the joint while enhancing the deformability at the bone-implant interface. With the use of a more ductile metal, CP-Ti, these meta-implants could be deformed without strut failure.

Statistical shape modeling of the hip and the association with hip osteoarthritis: a systematic review.

OBJECTIVE: To summarize available evidence on the association between hip shape as quantified by statistical shape modeling (SSM) and the incidence or progression of hip osteoarthritis. DESIGN: We conducted a systematic search of five electronic databases, based on a registered protocol (available: PROSPERO CRD42020145411). Articles presenting original data on the longitudinal relationship between radiographic hip shape (quantified by SSM) and hip OA were eligible. Quantitative meta-analysis was precluded because of the use of different SSM models across studies. We used the Newcastle-Ottawa Scale (NOS) for risk of bias assessment. RESULTS: Nine studies (6,483 hips analyzed with SSM) were included in this review. The SSM models used to describe hip shape ranged from 16 points on the femoral head to 85 points on the proximal femur and hemipelvis. Multiple hip shape features and combinations thereof were associated with incident or progressive hip OA. Shape variants that seemed to be consistently associated with hip OA across studies were acetabular dysplasia, cam morphology, and deviations in acetabular version (either excessive anteversion or retroversion). CONCLUSIONS: Various radiographic, SSM-defined hip shape features are associated with hip OA. Some hip shape features only seem to increase the risk for hip OA when combined together. The heterogeneity of the used SSM models across studies precludes the estimation of pooled effect sizes. Further studies using the same SSM model and definition of hip OA are needed to allow for the comparison of outcomes across studies, and to validate the found associations.

Treating infections with ionizing radiation: a historical perspective and emerging techniques.

BACKGROUND: Widespread use and misuse of antibiotics have led to a dramatic increase in the emergence of antibiotic resistant bacteria, while the discovery and development of new antibiotics is declining. This has made certain implant-associated infections such as periprosthetic joint infections, where a biofilm is formed, very difficult to treat. Alternative treatment modalities are needed to treat these types of infections in the future. One candidate that has been used extensively in the past, is the use of ionizing radiation. This review aims to provide a historical overview and future perspective of radiation therapy in infectious diseases with a focus on orthopedic infections. METHODS: A systematic search strategy was designed to select studies that used radiation as treatment for bacterial or fungal infections. A total of 216 potentially relevant full-text publications were independently reviewed, of which 182 focused on external radiation and 34 on internal radiation. Due to the large number of studies, several topics were chosen. The main advantages, disadvantages, limitations, and implications of radiation treatment for infections were discussed. RESULTS: In the pre-antibiotic era, high mortality rates were seen in different infections such as pneumonia, gas gangrene and otitis media. In some cases, external radiation therapy decreased the mortality significantly but long-term follow-up of the patients was often not performed so long term radiation effects, as well as potential increased risk of malignancies could not be investigated. Internal radiation using alpha and beta emitting radionuclides show great promise in treating fungal and bacterial infections when combined with selective targeting through antibodies, thus minimizing possible collateral damage to healthy tissue. CONCLUSION: The novel prospects of radiation treatment strategies against planktonic and biofilm-related microbial infections seem feasible and are worth investigating further. However, potential risks involving radiation treatment must be considered in each individual patient.

Functionality-packed additively manufactured porous titanium implants.

The holy grail of orthopedic implant design is to ward off both aseptic and septic loosening for long enough that the implant outlives the patient. Questing this holy grail is feasible only if orthopedic biomaterials possess a long list of functionalities that enable them to discharge the onerous task of permanently replacing the native bone tissue. Here, we present a rationally designed and additive manufacturing (AM) topologically ordered porous metallic biomaterial that is made from Ti-6Al-4V using selective laser melting and packs most (if not all) of the required functionalities into a single implant. In addition to presenting a fully interconnected porous structure and form-freedom that enables realization of patient-specific implants, the biomaterials developed here were biofunctionalized using plasma electrolytic oxidation to locally release both osteogenic (i.e. strontium) and antibacterial (i.e. silver ions) agents. The same single-step biofunctionalization process also incorporated hydroxyapatite into the surface of the implants. Our measurements verified the continued release of both types of active agents up to 28 days. Assessment of the antibacterial activity in vitro and in an ex vivo murine model demonstrated extraordinarily high levels of bactericidal effects against a highly virulent and multidrug-resistant Staphylococcus aureus strain (i.e. USA300) with total eradication of both planktonic and adherent bacteria. This strong antibacterial behavior was combined with a significantly enhanced osteogenic behavior, as evidenced by significantly higher levels of alkaline phosphatase (ALP) activity compared with non-biofunctionalized implants. Finally, we discovered synergistic antibacterial behavior between strontium and silver ions, meaning that 4-32 folds lower concentrations of silver ions were required to achieve growth inhibition and total killing of bacteria. The functionality-packed biomaterial presented here demonstrates a unique combination of functionalities that make it an advanced prototype of future orthopedic biomaterials where implants will outlive patients.

Predicting the mechanical hip-knee-ankle angle accurately from standard knee radiographs: a cross-validation experiment in 100 patients.

Background and purpose - Being able to predict the hip-knee-ankle angle (HKAA) from standard knee radiographs allows studies on malalignment in cohorts lacking full-limb radiography. We aimed to develop an automated image analysis pipeline to measure the femoro-tibial angle (FTA) from standard knee radiographs and test various FTA definitions to predict the HKAA. Patients and methods - We included 110 pairs of standard knee and full-limb radiographs. Automatic search algorithms found anatomic landmarks on standard knee radiographs. Based on these landmarks, the FTA was automatically calculated according to 9 different definitions (6 described in the literature and 3 newly developed). Pearson and intra-class correlation coefficient [ICC]) were determined between the FTA and HKAA as measured on full-limb radiographs. Subsequently, the top 4 FTA definitions were used to predict the HKAA in a 5-fold cross-validation setting. Results - Across all pairs of images, the Pearson correlations between FTA and HKAA ranged between 0.83 and 0.90. The ICC values from 0.83 to 0.90. In the cross-validation experiments to predict the HKAA, these values decreased only minimally. The mean absolute error for the best method to predict the HKAA from standard knee radiographs was 1.8° (SD 1.3). Interpretation - We showed that the HKAA can be automatically predicted from standard knee radiographs with fair accuracy and high correlation compared with the true HKAA. Therefore, this method enables research of the relationship between malalignment and knee pathology in large (epidemiological) studies lacking full-limb radiography.

Radioimmunotherapy of methicillin-resistant Staphylococcus aureus in planktonic state and biofilms.

BACKGROUND: Implant associated infections such as periprosthetic joint infections are difficult to treat as the bacteria form a biofilm on the prosthetic material. This biofilm complicates surgical and antibiotic treatment. With rising antibiotic resistance, alternative treatment options are needed to treat these infections in the future. The aim of this article is to provide proof-of-principle data required for further development of radioimmunotherapy for non-invasive treatment of implant associated infections. METHODS: Planktonic cells and biofilms of Methicillin-resistant staphylococcus aureus are grown and treated with radioimmunotherapy. The monoclonal antibodies used, target wall teichoic acids that are cell and biofilm specific. Three different radionuclides in different doses were used. Viability and metabolic activity of the bacterial cells and biofilms were measured by CFU dilution and XTT reduction. RESULTS: Alpha-RIT with Bismuth-213 showed significant and dose dependent killing in both planktonic MRSA and biofilm. When planktonic bacteria were treated with 370 kBq of 213Bi-RIT 99% of the bacteria were killed. Complete killing of the bacteria in the biofilm was seen at 185 kBq. Beta-RIT with Lutetium-177 and Actinium-225 showed little to no significant killing. CONCLUSION: Our results demonstrate the ability of specific antibodies loaded with an alpha-emitter Bismuth-213 to selectively kill staphylococcus aureus cells in vitro in both planktonic and biofilm state. RIT could therefore be a potentially alternative treatment modality against planktonic and biofilm-related microbial infections.

High-fat feeding primes the mouse knee joint to develop osteoarthritis and pathologic infrapatellar fat pad changes after surgically induced injury.

OBJECTIVE: Obesity is one of the greatest risk factors for osteoarthritis (OA) and evidence is accumulating that inflammatory mediators and innate immunity play an important role. The infrapatellar fat pad (IPFP) could be a potential local source of inflammatory mediators in the knee. Here, we combine surgical joint damage with high-fat feeding in mice to investigate inflammatory responses in the IPFP during OA development. DESIGN: Mice (n = 30) received either a low-fat diet (LFD), high-fat diet (HFD) for 18 weeks or switched diets (LFD > HFD) after 10 weeks. OA was induced by surgical destabilization of the medial meniscus (DMM), contralateral knees served as sham controls. An additional HFD-only group (n = 15) received no DMM. RESULTS: The most pronounced inflammation, characterized by macrophage crown-like structures (CLS), was found in HFD + DMM mice, CLS increased compared to HFD only (mean difference = 7.26, 95%CI [1.52-13.0]) and LFD + DMM (mean difference = 6.35, 95%CI [0.53-12.18). The M1 macrophage marker iNOS increased by DMM (ratio = 2.48, 95%CI [1.37-4.50]), while no change in M2 macrophage marker CD206 was observed. Fibrosis was minimal by HFD alone, but in combination with DMM it increased with 23.45% (95%CI [13.67-33.24]). CONCLUSIONS: These findings indicate that a high-fat diet alone does not trigger inflammation or fibrosis in the infrapatellar fat pad, but in combination with an extra damage trigger, like DMM, induces inflammation and fibrosis in the infrapatellar fat pad. These data suggest that HFD provides a priming effect on the infrapatellar fat pad and that combined actions bring the joint in a metabolic state of progressive OA.

Mechanical performance of auxetic meta-biomaterials.

The innovative design of orthopedic implants could play an important role in the development of life-lasting implants, by improving both primary and secondary implant fixations. The concept of meta-biomaterials aims to achieve a unique combination of mechanical, mass transport, and biological properties through optimized topological design of additively manufactured (AM) porous biomaterials. In this study, we primarily focused on a specific class of meta-biomaterials, namely auxetic meta-biomaterials. Their extraordinary behavior of lateral expansion in response to axial tension could potentially improve implant-bone contact in certain orthopedic applications. In this work, a multitude of auxetic meta-biomaterials were rationally designed and printed from Ti-6Al-4V using a commercially available laser powder bed fusion process called selective laser melting. The re-entrant hexagonal honeycomb unit cell was used as a starting point, which was then parametrically tuned to obtain a variety of mechanical and morphological properties. In this two-step study, the morphology and quasi-static properties of the developed meta-biomaterials were assessed using mechanical experiments accompanied with full-field strain measurements using digital image correlation. In addition, all our designs were computationally modelled using the finite element method. Our results showed the limits of the AM processes for the production of auxetic meta-biomaterials in terms of which values of the design parameters (e.g., re-entrant angle, relative density, and aspect ratio) could be successfully manufactured. We also found that the AM process itself imparts significant influence on the morphological and mechanical properties of the resulting auxetic meta-biomaterials. This further highlights the importance of experimental studies to determine the actual mechanical properties of such metamaterials. The elastic modulus and strength of many of our designs fell within the range of those reported for both trabecular and cortical bone. Unprecedented properties like these could be used to simultaneously address the different challenges faced in the mechanical design of orthopedic implants.

An automated workflow based on hip shape improves personalized risk prediction for hip osteoarthritis in the CHECK study.

OBJECTIVE: To design an automated workflow for hip radiographs focused on joint shape and tests its prognostic value for future hip osteoarthritis. DESIGN: We used baseline and 8-year follow-up data from 1,002 participants of the CHECK-study. The primary outcome was definite radiographic hip osteoarthritis (rHOA) (Kellgren-Lawrence grade ≥2 or joint replacement) at 8-year follow-up. We designed a method to automatically segment the hip joint from radiographs. Subsequently, we applied machine learning algorithms (elastic net with automated parameter optimization) to provide the Shape-Score, a single value describing the risk for future rHOA based solely on joint shape. We built and internally validated prediction models using baseline demographics, physical examination, and radiologists scores and tested the added prognostic value of the Shape-Score using Area-Under-the-Curve (AUC). Missing data was imputed by multiple imputation by chained equations. Only hips with pain in the corresponding leg were included. RESULTS: 84% were female, mean age was 56 (±5.1) years, mean BMI 26.3 (±4.2). Of 1,044 hips with pain at baseline and complete follow-up, 143 showed radiographic osteoarthritis and 42 were replaced. 91.5% of the hips had follow-up data available. The Shape-Score was a significant predictor of rHOA (odds ratio per decimal increase 5.21, 95%-CI (3.74-7.24)). The prediction model using demographics, physical examination, and radiologists scores demonstrated an AUC of 0.795, 95%-CI (0.757-0.834). After addition of the Shape-Score the AUC rose to 0.864, 95%-CI (0.833-0.895). CONCLUSIONS: Our Shape-Score, automatically derived from radiographs using a novel machine learning workflow, may strongly improve risk prediction in hip osteoarthritis.