How much have adverse occupational health outcomes among construction workers improved over time? Evidence from 25 years of medical screening.

BACKGROUND: Construction workers have always had a high risk of occupational illnesses. We used 25 years of data from a medical screening program serving older construction workers to determine how much health outcomes have improved over the past 60 years. METHODS: We investigated changes in relative risk for chest radiographs consistent with pneumoconiosis, COPD by spirometry, lung cancer mortality, and audiometry-assessed hearing impairment among workers participating in a medical screening program. Results were stratified by decade of first construction employment: before 1960, 1960-1969, 1970-1979, 1980-1989, and after 1990. Poisson and Cox regression analyses assessed relative risk by decade adjusted for age, sex, smoking, and years of construction trade work. RESULTS: Subjects were 94% male and, on average, 60 years old with 25 years of construction work. When compared to workers employed before 1960, those first employed after 1990 experienced the following reductions in model-adjusted relative risks: chronic obstructive pulmonary disease, 32%; all pneumoconiosis, 68%; parenchymal abnormalities, 35%; pleural abnormalities, 71%; hearing impairment, 20%; and lung cancer mortality, 48%. Risks started to decline in the 1960s with greatest reductions among workers first employed after 1970. CONCLUSIONS: This study demonstrates the positive impact that adoption of occupational health protections have had over the past 60 years. The greatest risk reductions were observed for outcomes with strong regulatory and legal incentives to reduce exposures and associated risks, such as those associated with inhalation hazards (asbestos and silica), while lowest improvement was for hearing impairment, for which little regulatory enforcement and few prevention incentives have been adopted.

Change in prevalence of asbestos-related disease among sheet metal workers 1986 to 2016.

BACKGROUND: A medical screening program began in 1986 for sheet metal workers exposed to asbestos, primarily while working alongside insulators applying spray-on asbestos materials, a practice banned in 1973. Exposure continues during maintenance, renovation, and repair. METHODS: Radiographic abnormalities among 26 397 sheet metal workers examined from 1986 to 2016 were analyzed by year of entry into the trade. Logistic regression was used to examine risk factors for parenchymal and pleural abnormalities among the overall study population and among the subcohort who entered the trade after 1973. RESULTS: Prevalence of parenchymal disease was 17.4% for those starting work before 1950 compared with 0.8% for those starting work after 1973 (adjusted prevalence odds ratio [pOR] = 26.65, 95% confidence interval [CI] = 18.46-38.46). For each calendar year after 1973, entering the trade 1 year later was associated with an estimated 12.7% decreased odds of acquiring asbestos-related disease (adjusted pOR = 0.873, 95% CI = 0.832-0.916). CONCLUSION: Sheet metal workers who began work after the US implemented environmental and occupational regulations develop asbestos-related disease at much reduced rates, consistent with regulatory projections made for nonmalignant asbestos-related disease by the Occupational Safety and Health Administration at the time. Cancer remains a concern among this cohort, and lung cancer screening recommendations should consider year of entry into the trade. This study highlights the importance of regulatory intervention and of continued surveillance.

Early detection of lung cancer in a population at high risk due to occupation and smoking.

OBJECTIVE: The US National Comprehensive Cancer Network (NCCN) recommends two pathways for eligibility for Early Lung Cancer Detection (ELCD) programmes. Option 2 includes individuals with occupational exposures to lung carcinogens, in combination with a lesser requirement on smoking. Our objective was to determine if this algorithm resulted in a similar prevalence of lung cancer as has been found using smoking risk alone, and if so to present an approach for lung cancer screening in high-risk worker populations. METHODS: We enrolled 1260 former workers meeting NCCN criteria, with modifications to account for occupational exposures in an ELCD programme. RESULTS: At baseline, 1.6% had a lung cancer diagnosed, a rate similar to the National Lung Cancer Screening Trial (NLST). Among NLST participants, 59% were current smokers at the time of baseline scan or had quit smoking fewer than 15 years prior to baseline; all had a minimum of 30 pack-years of smoking. Among our population, only 24.5% were current smokers and 40.1% of our participants had smoked fewer than 30 pack-years; only 43.5% would meet entry criteria for the NLST. The most likely explanation for the high prevalence of screen-detected lung cancers in the face of a reduced risk from smoking is the addition of occupational risk factors for lung cancer. CONCLUSION: Occupational exposures to lung carcinogens should be incorporated into criteria used for ELCD programmes, using the algorithm developed by NCCN or with an individualised risk assessment; current risk assessment tools can be modified to incorporate occupational risk.

A Primer on the Acute Management of Intravenous Extravasation Injuries for the Plastic Surgeon.

Intravenous therapy is a common practice among many specialties. Intravenous therapy extravasation is a potential complication to such therapy. Hospitals without a dedicated wound care team trained in these interventions will often default to plastic surgical consultation, making an understanding of available interventions essential to the initial evaluation and management of these injuries. The goal of this article was to provide plastic surgeons and health care providers with a general overview of the acute management of intravenous infiltration and extravasation injuries. Though the decision for surgical versus nonsurgical management is often a clear one for plastic surgeons, local interventions, and therapies are often indicated and under-utilized in the immediate postinfiltration period. Thorough knowledge of these interventions should be a basic requirement in the armamentarium of plastic surgery consultants.

Hearing loss among older construction workers: Updated analyses.

BACKGROUND: A prior study of this construction worker population found significant noise-associated hearing loss. This follow-up study included a much larger study population and consideration of additional risk factors. METHODS: Data included audiometry, clinical chemistry, personal history, and work history. Qualitative exposure metrics for noise and solvents were developed. Analyses compared construction workers to an internal reference group with lower exposures and an external worker population with low noise exposure. RESULTS: Among participants (n = 19 127) an overall prevalence of hearing loss of 58% was observed, with significantly increased prevalence across all construction trades. Construction workers had significantly increased risk of hearing loss compared to reference populations, with increasing risk by work duration. Noise exposure, solvent exposure, hypertension, and smoking were significant risk factors in multivariate models. CONCLUSIONS: Results support a causal relationship between construction trades work and hearing loss. Prevention should focus on reducing exposure to noise, solvents, and cigarette smoke.

Development of a Diabetes Mellitus Knowledge Resource for Clinical Decision Support Assisting Primary Care Physicians With Work-Related Issues.

OBJECTIVE: The aim of this study was to describe the process by which a group of subject matter experts (SMEs) in the area of occupational health and primary care developed a clinical decision support (CDS) tool addressing work-related issues, which are important in the care of patients with diabetes mellitus (DM). The CDS is intended for primary care clinicians caring for employed adults with DM. METHODS: The SME's selected guidelines for the management of DM in working adults, reviewed pertinent literature, and developed specific recommendations for action in the clinical setting. RESULTS: Multiple factors at work may adversely affect DM management. Clinicians can support working patients through education and care strategies to improve control. CONCLUSION: Improved recognition of factors at work that can have an impact on DM care provides opportunities for improved management of DM among working adults.

Longitudinal decline in lung function among older construction workers.

BACKGROUND: Occupational exposures to vapours, gasses, dusts and fumes (VGDF) and chest X-ray abnormalities by the International Labour Office (ILO) classification system are associated with reduced lung function, with the majority of published studies being cross-sectional. We examined the effects of VGDF exposures, as well as ILO parenchymal changes, pleural plaque and diffuse pleural thickening (DPT) on reduction in lung function in a longitudinal study. METHODS: Chest radiographs and spirometry for 3150 ageing construction workers enrolled in a medical screening programme with a baseline and at least one follow-up examination were studied. Indices for VGDF exposure, parenchymal changes, pleural plaque and DPT severity were developed and used in longitudinal mixed models of lung function. RESULTS: Smoking and VGDF exposure were associated with decreased FEV1 and FVC at baseline as well as accelerated rates of annual decline. High VGDF exposure was associated with a yearly decline of -19.5 mL for FEV1 and -15.7 mL for FVC. Parenchymal abnormalities, pleural plaque and DPT were more strongly associated with reduced FVC. An increase of one unit in the pleural plaque severity index resulted in approximately -5.3 mL loss of FVC and -3.3 mL loss of FEV1, with a possible non-linear effect of plaque on FEV1. CONCLUSIONS: Increasing pleural plaque severity was associated with progressively greater loss of FVC and FEV1, supporting a causal association. VGDF exposures were associated with reduced FVC and FEV1 at baseline as well as accelerated annual loss of lung function.

Facilitators and barriers to the adoption of ergonomic solutions in construction.

BACKGROUND: Rates of musculoskeletal disorders in construction remain high. Few studies have described barriers and facilitators to the use of available ergonomic solutions. This paper describes these barriers and facilitators and their relationship to the level of adoption. METHODS: Three analysts rated 16 proposed ergonomic solutions from a participatory ergonomics study and assessed the level of adoption, six adoption characteristics, and identified the category of adoption from a theoretical model. RESULTS: Twelve solutions were always or intermittently used and were rated positively for characteristics of relative advantage, compatibility with existing work processes and trialability. Locus of control (worker vs. contractor) was not related to adoption. Simple solutions faced fewer barriers to adoption than those rated as complex. CONCLUSIONS: Specific adoption characteristics can help predict the use of new ergonomic solutions in construction. Adoption of complex solutions must involve multiple stakeholders, more time, and shifts in culture or work systems. Am. J. Ind. Med. 60:295-305, 2017. © 2017 Wiley Periodicals, Inc.

Impact of Secondary Prevention in an Occupational High-Risk Group.

BACKGROUND: A study of medical outcomes among 6857 elderly construction workers who received an initial and at least one periodic follow-up examination as a result of participating in a medical screening program was undertaken. METHODS: We compared results from the initial examination to follow-up examinations delivered at least 3 years after the initial examination for the following outcomes: body mass index (BMI); total serum cholesterol; nonhigh-density lipoprotein (non-HDL) cholesterol; hemoglobin A1c, hypertension; current cigarette smoking; and 10-year cardiovascular disease (CVD) risk scores. RESULTS: Statistically significant improvements (P < 0.05) were observed for all measures except BMI. CONCLUSIONS: Participation in a periodic medical screening program for elderly construction workers is associated with a favorable impact on common health outcomes. When presented with a program designed for them, blue-collar workers are motivated to seek improvements in their health status.

Respiratory Cancer and Non-Malignant Respiratory Disease-Related Mortality among Older Construction Workers-Findings from the Health and Retirement Study.

OBJECTIVE: This study explored the risk of respiratory cancer and non-malignant respiratory disease (NMRD)-related mortality among older construction workers. METHODS: Analyzed data from the 1992-2010 RAND Health and Retirement Study (HRS) and the HRS National Death Index - Cause of Death file. About 25,183 workers aged 50 years and older were examined, including 5,447 decedents and 19,736 survivors, of which 1,460 reported their longest job was in construction. Multinomial logistic regression assessed the differences in mortality between workers' longest occupations, controlling for confounders. RESULTS: After adjusting for smoking and demographics, construction workers were almost twice as likely to die from respiratory cancer (OR = 1.65; CI: 1.10-2.47) or NMRD (OR = 1.73; CI: 1.16-2.58) compared to white-collar workers. CONCLUSIONS: This study adds to the growing evidence that respiratory cancer and NMRD are frequently associated with construction exposure.

Evaluation of a participatory ergonomics intervention in small commercial construction firms.

BACKGROUND: Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. METHODS: Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short-term and intermediate impacts and long-term outcomes from surveys and field records. RESULTS: Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers' knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. CONCLUSIONS: The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. Am. J. Ind. Med. 59:465-475, 2016. © 2016 Wiley Periodicals, Inc.

An analysis of permanent work disability among construction sheet metal workers.

BACKGROUND: Causes of permanent work disability in the sheet metal industry are not well characterized. METHODS: Pension records were used to compare causes of disability among sheet metal workers and the U.S. working population. Subgroup analysis examined the major causes of sheet metal worker disability. RESULTS: Musculoskeletal disorders (MSDs), circulatory disease, and injuries were leading causes of sheet metal worker disability (47.2%, 13.7%, 10.9% of awards, respectively). Award distribution differed from the U.S. working population (P < 0.0001); MSDs and injuries accounted for higher proportions of sheet metal worker awards, particularly at spine, shoulder, and knee. CONCLUSIONS: Higher proportions of awards caused by MSD or injury among sheet metal workers may reflect higher rates of work-related injuries and MSDs, a high likelihood of disability with construction work given the same impairment, or higher prevalence of other conditions in the general population. Prevention requires task-specific ergonomic innovations and proven participatory interventions.

Observed use of voluntary controls to reduce physical exposures among sheet metal workers of the mechanical trade.

INTRODUCTION: Little is known about the transfer into the workplace of interventions designed to reduce the physical demands of sheet metal workers. METHODS: We reviewed videos from a case series of 15 sheet metal worksite assessments performed in 2007-2009 to score postures and physical loads, and to observe the use of recommended interventions to reduce physical exposures in sheet metal activities made by a NIOSH stakeholder meeting in 2002. RESULTS: Workers showed consistent use of material handling devices, but we observed few uses of recommended interventions to reduce exposures during overhead work. Workers spent large proportions of time in awkward shoulder elevation and low back rotation postures. CONCLUSIONS: In addition to the development of new technologies and system designs, increased adoption of existing tools and practices could reduce time spent in awkward postures and other risks for musculoskeletal disorders in sheet metal work.

Creating a climate for ergonomic changes in the construction industry.

BACKGROUND: Ergonomic solutions that have gained acceptance in other industries are often considered not applicable to a construction work environment, even though the industry is characterized by high physical work demands. METHODS: We conducted 50 key informant interviews with 23 contractor representatives and 27 union staff, plus 4 focus groups with a total of 48 workers. RESULTS: Many workers hold the belief that WMSDs are inevitable as part of the job, and did not consistently believe that changing the nature of the work could prevent that injury or pain. The interviewees reported limited availability and accessibility of tested and effective tools that both reduce physical demand and also get the job done efficiently and effectively. Yet for each major obstacle to implementation of ergonomics in the industry identified, the construction professionals we interviewed offered a variety of solutions. CONCLUSIONS: Contractors, unions, and workers need to work together to find actions that work within the parameters of the current economic environment.

A case-control study of airways obstruction among construction workers.

BACKGROUND: While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. METHODS: The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. RESULTS: Approximately 18% (95% CI = 2-24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. A measure of all VGDF exposures combined was a strong predictor of COPD risk. CONCLUSIONS: Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted.

Best practices for health and safety technology transfer in construction.

BACKGROUND: Construction continues to be a dangerous industry, yet solutions that would prevent injury and illness do exist. Prevention of injury and illness among construction workers requires dissemination, adoption, and implementation of these effective interventions, or "research to practice" (r2p). METHODS: CPWR recruited participants with experience and insight into effective methods for diffusion of health and safety technologies in this industry for a symposium with 3 group sessions and 3 breakout groups. The organizers reviewed session notes and identified 141 recommendations, which were then assigned to 13 over-arching themes. RESULTS: Recommendations included a guide for researchers on patenting and licensing, a business case model, and in-depth case studies including development, testing, manufacturing, marketing, and diffusion. CONCLUSIONS: A more comprehensive understanding of the health and safety technology transfer landscape, the various actors, and their motivators and goals will help to foster the successful commercialization and diffusion of health and safety innovations.