Structure and Strength of Bovine and Equine Amniotic Membrane.

Thin, strong scaffold materials are needed for surgical applications. New materials are required, particularly those readily available, such as from non-human sources. Bovine amniotic membrane (antepartum) and equine amniotic membrane (postpartum) were characterized with tear and tensile tests. The structural arrangement of the collagen fibrils was determined by small-angle X-ray scattering, scanning electron microscopy, and ultrasonic imaging. Bovine amnion had a thickness-normalized tear strength of 12.6 (3.8) N/mm, while equine amnion was 14.8 (5.3) N/mm. SAXS analysis of the collagen fibril arrangement yielded an orientation index of 0.587 (0.06) and 0.681 (0.05) for bovine and equine, respectively. This may indicate a relationship between more highly aligned collagen fibrils and greater strength, as seen in other materials. Amnion from bovine or equine sources are strong, thin, elastic materials, although weaker than other collagen tissue materials commonly used, that may find application in surgery as an alternative to material from human donors.

Collagen dehydration.

Type I collagen is a ubiquitous structural protein in animal tissues. It is normally present in a hydrated form. However, collagen is very dependent on associated water for its mechanical properties. In skin, where type I collagen is dominant, there is a longstanding concern that the skin and therefore collagen may partially dry out and result in structural degradation. Here we show that dehydration of type I collagen fibrils, using 2-propanol, results in a two-stage dehydration process. Initially, the fibrils do not change length, i.e. the D-period remains constant, but shrinkage occurs within the fibrils by an increase in the gap region and a decrease in the overlap region within a D-band and a shortening of the helical turn distance and fibril diameter. Only with further dehydration does the length of the collagen fibril decrease (a decrease in D-period). This mechanism explains why collagen materials are resistant to gross structural change in the early stages of dehydration and shows why they may then suffer from sudden external shrinkage with further dehydration.

Human parainfluenza 2 & 4: Clinical and genetic epidemiology in the UK, 2013-2017, reveals distinct disease features and co-circulating genomic subtypes.

BACKGROUND: Human Parainfluenza viruses (HPIV) comprise of four members of the genetically distinct genera of Respirovirus (HPIV1&3) and Orthorubulavirus (HPIV2&4), causing significant upper and lower respiratory tract infections worldwide, particularly in children. However, despite frequent molecular diagnosis, they are frequently considered collectively or with HPIV4 overlooked entirely. We therefore investigated clinical and viral epidemiological distinctions of the relatively less prevalent Orthorubulaviruses HPIV2&4 at a regional UK hospital across four autumn/winter epidemic seasons. METHODS: A retrospective audit of clinical features of all HPIV2 or HPIV4 RT-PCR-positive patients, diagnosed between 1st September 2013 and 12th April 2017 was undertaken, alongside sequencing of viral genome fragments in a representative subset of samples. RESULTS: Infection was observed across all age groups, but predominantly in children under nine and adults over 40, with almost twice as many HPIV4 as HPIV2 cases. Fever, abnormal haematology, elevated C-reactive protein and hospital admission were more frequently seen in HPIV2 than HPIV4 infection. Each of the four seasonal peaks of either HPIV2, HPIV4 or both, closely matched that of RSV, occurring in November and December and preceding that of Influenza A. A subset of viruses were partially sequenced, indicating co-circulation of multiple subtypes of both HPIV2&4, but with little variation between each epidemic season or from limited global reference sequences. CONCLUSIONS: Despite being closest known genetic relatives, our data indicates a potential difference in associated disease between HPIV2 and HPIV4, with more hospitalisation seen in HPIV2 mono-infected individuals, but a greater overall number of HPIV4 cases.

Enterovirus D68 epidemic, UK, 2018, was caused by subclades B3 and D1, predominantly in children and adults, respectively, with both subclades exhibiting extensive genetic diversity.

Enterovirus D68 (EV-D68) has recently been identified in biennial epidemics coinciding with diagnoses of non-polio acute flaccid paralysis/myelitis (AFP/AFM). We investigated the prevalence, genetic relatedness and associated clinical features of EV-D68 in 193 EV-positive samples from 193 patients in late 2018, UK. EV-D68 was detected in 83 (58 %) of 143 confirmed EV-positive samples. Sequencing and phylogenetic analysis revealed extensive genetic diversity, split between subclades B3 (n=50) and D1 (n=33), suggesting epidemiologically unrelated infections. B3 predominated in children and younger adults, and D1 in older adults and the elderly (P=0.0009). Clinical presentation indicated causation or exacerbation of respiratory distress in 91.4 % of EV-D68-positive individuals, principally cough (75.3 %), shortness of breath (56.8 %), coryza (48.1 %), wheeze (46.9 %), supplemental oxygen required (46.9 %) and fever (38.9 %). Two cases of AFM were observed, one with EV-D68 detectable in the cerebrospinal fluid, but otherwise neurological symptoms were rarely reported (n=4). Both AFM cases and all additional instances of intensive care unit (ICU) admission (n=5) were seen in patients infected with EV-D68 subclade B3. However, due to the infrequency of severe infection in our cohort, statistical significance could not be assessed.

Retrospective screening of routine respiratory samples revealed undetected community transmission and missed intervention opportunities for SARS-CoV-2 in the United Kingdom.

In the early phases of the SARS coronavirus type 2 (SARS-CoV-2) pandemic, testing focused on individuals fitting a strict case definition involving a limited set of symptoms together with an identified epidemiological risk, such as contact with an infected individual or travel to a high-risk area. To assess whether this impaired our ability to detect and control early introductions of the virus into the UK, we PCR-tested archival specimens collected on admission to a large UK teaching hospital who retrospectively were identified as having a clinical presentation compatible with COVID-19. In addition, we screened available archival specimens submitted for respiratory virus diagnosis, and dating back to early January 2020, for the presence of SARS-CoV-2 RNA. Our data provides evidence for widespread community circulation of SARS-CoV-2 in early February 2020 and into March that was undetected at the time due to restrictive case definitions informing testing policy. Genome sequence data showed that many of these early cases were infected with a distinct lineage of the virus. Sequences obtained from the first officially recorded case in Nottinghamshire - a traveller returning from Daegu, South Korea - also clustered with these early UK sequences suggesting acquisition of the virus occurred in the UK and not Daegu. Analysis of a larger sample of sequences obtained in the Nottinghamshire area revealed multiple viral introductions, mainly in late February and through March. These data highlight the importance of timely and extensive community testing to prevent future widespread transmission of the virus.

Comparative effects of viral-transport-medium heat inactivation upon downstream SARS-CoV-2 detection in patient samples.

Introduction. The COVID-19 pandemic, which began in 2020 is testing economic resilience and surge capacity of healthcare providers worldwide. At the time of writing, positive detection of the SARS-CoV-2 virus remains the only method for diagnosing COVID-19 infection. Rapid upscaling of national SARS-CoV-2 genome testing presented challenges: (1) Unpredictable supply chains of reagents and kits for virus inactivation, RNA extraction and PCR-detection of viral genomes. (2) Rapid time to result of <24 h is required in order to facilitate timely infection control measures.Hypothesis. Extraction-free sample processing would impact commercially available SARS-CoV-2 genome detection methods.Aim. We evaluated whether alternative commercially available kits provided sensitivity and accuracy of SARS-CoV-2 genome detection comparable to those used by regional National Healthcare Services (NHS).Methodology. We tested several detection methods and tested whether detection was altered by heat inactivation, an approach for rapid one-step viral inactivation and RNA extraction without chemicals or kits.Results. Using purified RNA, we found the CerTest VIASURE kit to be comparable to the Altona RealStar system currently in use, and further showed that both diagnostic kits performed similarly in the BioRad CFX96 and Roche LightCycler 480 II machines. Additionally, both kits were comparable to a third alternative using a combination of Quantabio qScript one-step Quantitative Reverse Transcription Polymerase Chain Reaction (qRT-PCR) mix and Centre for Disease Control and Prevention (CDC)-accredited N1 and N2 primer/probes when looking specifically at borderline samples. Importantly, when using the kits in an extraction-free protocol, following heat inactivation, we saw differing results, with the combined Quantabio-CDC assay showing superior accuracy and sensitivity. In particular, detection using the CDC N2 probe following the extraction-free protocol was highly correlated to results generated with the same probe following RNA extraction and reported clinically (n=127; R2=0.9259).Conclusion. Our results demonstrate that sample treatment can greatly affect the downstream performance of SARS-CoV-2 diagnostic kits, with varying impact depending on the kit. We also showed that one-step heat-inactivation methods could reduce time from swab receipt to outcome of test result. Combined, these findings present alternatives to the protocols in use and can serve to alleviate any arising supply-chain issues at different points in the workflow, whilst accelerating testing, and reducing cost and environmental impact.

Enterovirus subtyping in a routine UK laboratory setting between 2013 and 2017.

BACKGROUND: Human enteroviruses (EV) are the leading cause of viral meningitis. EV genotyping is predominantly performed through amplification and sequencing of viral capsid protein-1 (VP1), frequently by national reference laboratories (NRLs). OBJECTIVE: To determine the frequency of genotyping failure in our NRL-submitted samples and apply a superior alternative assay to resolve untyped specimens. STUDY DESIGN: We initially audited genotyping data received for a cohort of patients in the East Midlands, UK by the NRL between 2013 and 2017, then identified an alternative RT-PCR typing method by literature review and evaluated primers from both assays in silico against comprehensive publicly available genomic data. The alternative assay was further optimised and applied to archived nucleic acids from previously untypable samples. RESULTS: Genotyping data showed a significant increase in untypable EV strains through the study period (p = 0.0073). Typing failure appeared unrelated to sample type or viral load. In silico analyses of 2,201 EV genomes showed high levels of mismatch between reference assay primers and clinically significant EV-species, in contrast to a selected alternative semi-nested RT-PCR VP1-typing assay. This alternative assay, with minor modifications, successfully genotyped 23 of 24 previously untypable yet viable archived specimens (EV-A, n = 4; EV-B, n = 19). Phylogenetic analyses identified no predominant strain within NRL untypable isolates, suggesting sub-optimal reference assay sensitivity across EV species, in agreement with in silico analyses. CONCLUSION: This modified highly sensitive RT-PCR assay presents a suitable alternative to the current English national reference VP1-typing assay and is recommended in other settings experiencing typing failure.

Bovine Meniscus Middle Zone Tissue: Measurement of Collagen Fibril Behavior During Compression.

BACKGROUND: Type I collagen is the major component of the extracellular matrix of the knee's meniscus and plays a central role in that joint's biomechanical properties. Repair and reconstruction of tissue damage often requires a scaffold to assist the body to rebuild. The middle zone of bovine meniscus is a material that may be useful for the preparation of extracellular matrix scaffolds. METHODS: Here, synchrotron-based small-angle X-ray scattering (SAXS) patterns of bovine meniscus were collected during unconfined compression. Collagen fibril orientation, D-spacing, compression distance and force were measured. RESULTS: The collagen fibrils in middle zone meniscal fibrocartilage become more highly oriented perpendicular to the direction of compression. The D-spacing also increases, from 65.0 to 66.3 nm with compression up to 0.43 MPa, representing a 1.8% elongation of collagen fibrils perpendicular to the compression. CONCLUSION: The elasticity of the collagen fibrils under tension along their length when the meniscus is compressed, therefore, contributes to the overall elastic response of the meniscus only under loads that exceed those likely to be experienced physiologically.

Human Bocavirus infection and respiratory tract disease identified in a UK patient cohort.

BACKGROUND: Since its first isolation in 2005, Human Bocavirus (HBoV) has been repeatedly associated with acute respiratory tract infections, although its role in pathogenicity remains unclear due to high co-infection rates. OBJECTIVES: To assess HBoV prevalence and associated disease in a cohort of respiratory patients in the East Midlands, UK between 2015 and 2019. STUDY DESIGN: We initially investigated the undiagnosed burden of HBoV in a retrospective paediatric cohort sampled between 2015 and 2017 using an in-house PCR assay. HBoV was subsequently incorporated into the standard respiratory diagnostic pathway and we audited a calendar year of HBoV positive results between 2018 and 2019. RESULTS: Our retrospective PCR screening of previously routine diagnostic-negative samples from juvenile patients identified a 9% (n = 30) prevalence of HBoV type 1. These apparent HBoV1 mono-infections were frequently associated with respiratory tract symptoms, often severe requiring ventilation, oxygen and steroid intervention with 31% (n = 9) of individuals requiring intensive care. When HBoV screening was subsequently adopted into the routine respiratory diagnostic pathway, year-round infections were observed in both children and adults peaking in February. 185 of 9098 (2.03%) individuals were found to be HBoV positive with children aged 12-24 months the principally infected group. However, HBoV infection was also observed in patients aged over 60, predominantly as a mono-infection. 23% of the 185 unique patients were HBoV monoinfected and persistent low-level DNA positivity was observed in 15 individuals up to 6-months after initial presentation. CONCLUSION: HBoV1 is a prevalent respiratory infection in the UK capable of causing serious monoinfections.

Measured collagen fibril response to arterial inflation using SAXS.

Arteries are elastic structures containing both elastin and collagen. While the high content of elastin is understood to be important for the elasticity of arteries with systolic and diastolic pressure pulses, the role of collagen in the elastic properties of arteries is less understood. Here we use small angle X-ray scattering to investigate the changes in arrangement of collagen fibrils and the strain experienced by collagen fibrils as arteries are inflated. Collagen fibrils re-orient to become more aligned in both the annular direction and radially as arteries inflate. With arterial pressures up to 32 kPa there is no observable increase in D-spacing of the collagen fibrils (<0.1%) indicating that there is no extension of straightened fibrils and therefore no change in stress on the collagen fibrils. This is in contrast to tissue such as skin where stress of the tissue may induce strains in collagen fibrils of >6%. In arteries the collagen fibril elasticity (strain at the scale of fibrils) is not the main elastic component of the arterial walls. This indicates that wall elasticity is dominated by other factors such as the structural arrangement of the collagen fibers.

Tropical Keratopathy (Florida Spots) in Cats.

The authors used microscopy and synchrotron-based small-angle X-ray scattering analysis (SAXS) to describe lesions macroscopically typical of tropical keratopathy ("Florida spots") from 6 cats on St Kitts. Microscopically, there were varying degrees of epithelial hyperplasia and thinning of the cornea (by 4% to 18%) due to loss of corneal stroma associated with dense accumulations of collagen in the superficial stroma. The collagen fibrils in lesions were wider and had more variable diameters (39.5 ± 5.0 nm, mean ± SD) than in normal corneas (25.9 ± 3.6 nm; P < .01). There were occasional vacuoles (<1 µm) in the corneal epithelial basement membrane but no evidence of inflammation, edema, stromal neovascularization, fibrosis, acid-fast organisms, or structures suggestive of a fungal organism. SAXS analysis showed collagen fibril diameters and variation in size were greater in stroma containing the lesions compared to normal corneas (48.8 ± 4.5 nm vs 35.5 ± 2.6; P < .05). The d-spacing of collagen in the stroma of lesions and normal corneas was the same, but the average orientation index of collagen in lesions was greater (0.428 ± 0.08 vs 0.285 ± 0.03; P < .05). A survey revealed Florida spots lesions were static over time and became less obvious in only 1 of 6 affected cats adopted on St Kitts and taken to areas in the US where lesions are not reported. An anterior stromal collagen disorder with various degrees of epithelial hyperplasia is the pathologic hallmark of lesions clinically identical to Florida spots in cats from St Kitts.

Acellular dermal matrix collagen responds to strain by intermolecular spacing contraction with fibril extension and rearrangement.

Acellular dermal matrix (ADM) materials are used as scaffold materials in reconstructive surgery. The internal structural response of these materials in load-bearing clinical applications is not well understood. Bovine ADM is characterized by small-angle X-ray scattering while subjected to strain. Changes in collagen fibril orientation (O), degree of orientation as an orientation index (OI) (measured both edge-on and flat-on to the ADM), extension (from d-spacing changes) and changes to intermolecular spacing are measured as a result of the strain and stress in conjunction with mechanical measurements. As is already well established in similar systems, when strained, collagen fibrils in ADM can accommodate the strain by reorienting by up to 50° (as an average of all the fibrils). This reorientation corresponds to the OI increasing from 0.3 to 0.7. Here it is shown that concurrently, the intermolecular spacing between tropocollagen decreases by 10% from 15.8 to 14.3Å, with the fibril diameter decreasing from 400 to 375Å, and the individual fibrils extending by an average of 3.1% (D-spacing from 63.9 to 65.9nm). ADM materials can withstand large strain and high stress due to the combined mechanisms of collagen reorientation, individual fibril extension, sliding and changes in the molecular packing density.

Artificially modified collagen fibril orientation affects leather tear strength.

BACKGROUND: Ovine leather has around half the tear strength of bovine leather and is therefore not suitable for high-value applications such as shoes. Tear strength has been correlated with the natural collagen fibril alignment (orientation index, OI). It is hypothesized that it could be possible to artificially increase the OI of the collagen fibrils and that an artificial increase in OI could increase tear strength. RESULTS: Ovine skins, after pickling and bating, were strained biaxially during chrome tanning. The strain ranged from 2 to 15% of the initial sample length, either uniformly in both directions by 10% or with 3% in one direction and 15% in the other. Once tanned, the leather tear strengths were measured and the collagen fibril orientation was measured using synchrotron-based small-angle X-ray scattering. CONCLUSION: The OI increased as a result of strain during tanning from 0.48 to 0.79 (P = 0.001) measured edge-on and the thickness-normalized tear strength increased from 27 to 43 N mm-1 (P < 0.001) after leather was strained 10% in two orthogonal directions. This is evidence to support a causal relationship between high OI (measured edge-on), highly influenced by thickness, and tear strength. It also provides a method to produce stronger leather. © 2017 Society of Chemical Industry.

Deer leather: analysis of the microstructure affecting pebble.

BACKGROUND: Deer leather has a characteristic pattern, referred to as 'pebble', which is accorded such importance that a lack of it renders a leather defective. Synchrotron-based small-angle X-ray scattering (SAXS), ultrasonic imaging, scanning electron microscopy, and tear tests were used to investigate the structural characteristics of well-pebbled and poorly pebbled cervine leathers. RESULTS: Poorly pebbled leather has a less open structure in the upper grain region than well-pebbled leather. The orientation index (OI) of leather with a poor pebble is less than that of the well-pebbled leather, particularly in the corium. The tear strength is also less for the poorly pebbled leather. CONCLUSIONS: The differences in structure between well- and poorly pebbled cervine leathers are not the same as the structural differences between tight and loose bovine leathers, to which they are sometimes compared. On the contrary, good pebble may reflect an internal structure similar to that of looseness. It is hoped that methods to prevent a reduction in pebbling during the processing of cervine leather may be developed by applying this knowledge of cervine leather's structural characteristics. © 2017 Society of Chemical Industry.

A small angle X-ray scattering study of the structure and development of looseness in bovine hides and leather.

BACKGROUND: Some bovine hides produce poor quality leather, termed loose leather. The structural characteristics of hides and the intermediate processed stages that lead to loose leather are not well understood. In the present study, synchrotron-based small angle X-ray scattering (SAXS) is used to investigate collagen fibril orientation at the different stages of processing (i.e. from hide through to leather) that result in both tight and loose leathers. RESULTS: Tight leather of a relatively isotropic texture has a lower orientation index (OI) than loose leather of a more pronounced stratified texture; conversely, tight pickled hide and wet blue have a higher OI than loose pickled hide and wet blue. There is a greater increase in OI on processing from pickled hide to dry crust (leather) for loose material. This is largely the result of a greater increase in hide thickness prior to pickling for loose hide than tight hide, followed by a greater decrease at the dry crust stage. The collagen fibrils in loose leather and wet blue more readily orient under stress than do those in tight leather. Loose leather has a more pronounced layered structure than tight leather, although this difference is not apparent from SAXS measurements of hide prior to the dry crust stage; it develops during processing. CONCLUSION: The greater swelling of the loose hide during processing disrupts the structure and leads to a more layered collagen arrangement on shrinking at the final dry crust stage. © 2016 Society of Chemical Industry.

Collagen Fibril Intermolecular Spacing Changes with 2-Propanol: A Mechanism for Tissue Stiffness.

Materials composed primarily of collagen are important as surgical scaffolds and other medical devices and require flexibility. However, the factors that control the suppleness and flexibility of these materials are not well understood. Acellular dermal matrix materials in aqueous mixtures of 2-propanol were studied. Synchrotron-based small-angle X-ray scattering was used to characterize the collagen structure and structural arrangement. Stiffness was measured by bend tests. Bend modulus increased logarithmically with 2-propanol concentration from 0.5 kPa in water to 103 kPa in pure 2-propanol. The intermolecular spacing between tropocollagen molecules decreased from 15.3 to 11.4 Å with increasing 2-propanol concentration while fibril diameter decreased from 57.2 to 37.2 nm. D-spacing initially increased from 63.6 to 64.2 nm at 50% 2-propanol then decreased to 60.3 nm in pure 2-propanol. The decrease in intermolecular spacing and fibril diameter are due to removal of water and the collapse of the hydrogen bond structure between tropocollagen molecules causing closer packing of the molecules within a fibril. We speculate this tighter molecular packing may restrict the sliding of collagen within fibrils, and similar disruption of the extended hydration layer between fibrils may lead to restriction of sliding between fibrils. This mechanism for tissue stiffness may be more general.

Collagen Fibril Response to Strain in Scaffolds from Ovine Forestomach for Tissue Engineering.

Scaffold biomaterials are typically applied surgically as reinforcement for weakened or damaged tissue, acting as substrates on which healing tissue can grow. Natural extracellular matrix (ECM) materials consisting mainly of collagen are often used for this purpose, but are anisotropic. Ovine forestomach matrix (OFM) ECM was exposed to increasing strain and synchrotron-based SAXS diffraction patterns and revealed that the collagen fibrils within underwent changes in orientation, orientation index (a measure of isotropy), and extension. Response to the strain depended on the direction the collagen fibrils were oriented. When the ECM was stretched in the direction of collagen fibril orientation, the fibrils become more oriented and begin to take up the strain immediately (as shown by the increased d-spacing). Stretch applied perpendicular to dominant fibril direction caused the fibrils to initially become less oriented as they were pulled away from the original direction, and less force was initially transmitted along the length of the fibrils (i.e., the d-spacing changed less). SAXS analysis of OFM and the starting raw tissue showed there is no difference in the structural arrangement of the collagen fibrils. Understanding the directional structural response of these materials under strain may influence how surgeons select and place the materials in use.

Looseness in bovine leather: microstructural characterization.

BACKGROUND: A substantial proportion of bovine leather production may be of poor quality, with the leather suffering from a characteristic known as looseness. This defect results in a poor visual appearance and greatly reduced value. The structural mechanism of looseness is not well understood. RESULTS: Samples of loose and tight bovine leather are characterized using small-angle X-ray scattering, ultrasonic imaging, and electron microscopy. The density of fibre packing and orientation of the fibrils are analysed. Tensile strength is also measured. Loose leather is characterized by more highly aligned collagen fibrils. This results in a weaker connection between the layers. There is a looser packing of the fibres in loose leather than in tight leather, with more gaps between fibre bundles, particularly in a region in the lower grain. This region is visible with in situ ultrasonic imaging. Loose leather has a higher tensile strength than tight leather. CONCLUSION: While a high degree of collagen fibril alignment is normally associated with strong leather, it has been shown that too much alignment results in loose leather. Understanding the physical basis of looseness is the first step in identifying looseness in hides and learning how to prevent looseness from developing during leather manufacture. © 2015 Society of Chemical Industry.

Collagen Fibril Structure and Strength in Acellular Dermal Matrix Materials of Bovine, Porcine, and Human Origin.

Strength is an important characteristic of acellular dermal matrix (ADM) materials used for surgical scaffolds. Strength depends on the material's structure, which may vary with the source from which the product is produced, including species and animal age. Here, variations in the physical properties and structures of ADM materials from three species are investigated: bovine (fetal and neonatal), porcine, and human materials. Thickness normalized, the bovine materials have a similar strength (tear strength of 75-124 N/m) to the human material (79 N/m), and these are both stronger than the porcine material (43 N/m). Thickness-normalized tensile strengths were similar among all species (18-34 N/mm2 for bovine although higher in fetal material, 18 N/mm2 for human and 21 N/mm2 for porcine). Structure is investigated with synchrotron-based small-angle X-ray scattering (SAXS) for collagen fibril orientation index (OI) and scanning electron microscopy (SEM). SEM reveals a more open structure in bovine ADM than in the porcine and human material. A correlation is found between OI and thickness-normalized tear strength in neonatal bovine material measured with the X-rays edge-on to the sample, but this relationship does not extend across species. The collagen fibril arrangement, viewed perpendicular to the surface, varies between species, with the human material having a unimodal distribution and rather isotropic (OI 0.08), the porcine being strongly bimodal and rather highly oriented (OI 0.61), the neonatal bovine between these two extremes with a bimodal distribution tending toward isotropic (OI 0.14-0.21) and the fetal bovine material being bimodal and less isotropic than neonatal (OI 0.24). The OI varies less through the thickness of the porcine and human materials than through the bovine materials. The similarities and differences in structure may inform the suitability of these materials for particular surgical applications.

Age dependent differences in collagen alignment of glutaraldehyde fixed bovine pericardium.

Bovine pericardium is used for heart valve leaflet replacement where the strength and thinness are critical properties. Pericardium from neonatal animals (4-7 days old) is advantageously thinner and is considered as an alternative to that from adult animals. Here, the structures of adult and neonatal bovine pericardium tissues fixed with glutaraldehyde are characterized by synchrotron-based small angle X-ray scattering (SAXS) and compared with the mechanical properties of these materials. Significant differences are observed between adult and neonatal tissue. The glutaraldehyde fixed neonatal tissue has a higher modulus of elasticity (83.7 MPa) than adult pericardium (33.5 MPa) and a higher normalised ultimate tensile strength (32.9 MPa) than adult pericardium (19.1 MPa). Measured edge on to the tissue, the collagen in neonatal pericardium is significantly more aligned (orientation index (OI) 0.78) than that in adult pericardium (OI 0.62). There is no difference in the fibril diameter between neonatal and adult pericardium. It is shown that high alignment in the plane of the tissue provides the mechanism for the increased strength of the neonatal material. The superior strength of neonatal compared with adult tissue supports the use of neonatal bovine pericardium in heterografts.