Influence of Surface Texturing on the Dry Tribological Properties of Polymers in Medical Devices.

There is a constant need to improve patient comfort and product performance associated with the use of medical devices. Efforts to optimise the tribological characteristics of medical devices usually involve modifying existing devices without compromising their main design features and functionality. This article constitutes a state-of-the-art review of the influence of dry friction on polymeric components used in medical devices, including those having microscale surface features. Surface tribology and contact interactions are discussed, along with alternative forms of surface texturing. Evident gaps in the literature, and areas warranting future research are highlighted; these include friction involving polymer Vs polymer surfaces, information regarding which topologies and feature spacings provide the best performing textured surfaces, and design guidelines that would assist manufacturers to minimise or maximise friction under non-lubricated conditions.

Optical Sensor for Real-Time pH Monitoring in Human Tissue.

This article reports on a fiber-based ratiometric optical pH sensor for use in real-time and continuous in vivo pH monitoring in human tissue. Stable hybrid sol-gel-based pH sensing material is deposited on a highly flexible plastic optical fiber tip and integrated with excitation and detection electronics. The sensor is extensively tested in a laboratory environment before it is applied in vivo in a human model. The pH sensor performance in the laboratory environment outperforms the state-of-the-art reported in the current literature. It exhibits the highest sensitivity in the physiological pH range, resolution of 0.0013 pH units, excellent sensor to sensor reproducibility, long-term stability, short response time of <2 min, and drift of 0.003 pH units per 22 h. The sensor also exhibits promising performance in in vitro whole blood samples. In addition, human evaluations conducted under this project demonstrate successful short-term deployment of this sensor in vivo.

Ratiometric fluorescence-based dissolved carbon dioxide sensor for use in environmental monitoring applications.

The focus of this work is on the development and characterisation of a fluorescence-based ratiometric sol-gel-derived dissolved carbon dioxide (dCO(2)) sensor for use in environmental monitoring applications. Fluorescence-based dCO(2) sensors are attractive as they facilitate the development of portable and low-cost systems that can be easily deployed outside the laboratory environment. The sensor developed for this work exploits a pH fluorescent dye 1-hydroxypyrene-3,6,8-trisulfonic acid, ion-paired with cetyltrimethylammonium bromide (HPTS-IP), which has been entrapped in a hybrid sol-gel-based matrix derived from n-propyltriethoxysilane along with the liphophilic organic base. The sensor spot deposited on a cover slip has been interrogated with a robust, ratiometric optical probe that combines effective fluorescence excitation and detection and thus facilitates the production of a highly sensitive sensor system using low-cost optoelectronic components. The probe design involves the use of dual-LED excitation in order to facilitate ratiometric operation and uses a silicon PIN photodiode. HPTS-IP exhibits two pH-dependent changes in excitation bands, which allows for dual excitation ratiometric detection as an indirect measure of the dCO(2). Such measurements are insensitive to changes in dye concentration, leaching and photobleaching of the fluorophore and instrument fluctuations unlike unreferenced fluorescence intensity measurements. The performance of the sensor system is characterised by a high degree of repeatability, reversibility and stability. Calculated limit of detection for the sensor was 35 ppb. The sensor probe was used to monitor dCO(2) levels in a laboratory-based aquatic habitat, and the expected diurnal pattern was clearly visible. The influence of temperature, biofouling and photobleaching on sensor performance has been also investigated.

Fabrication and performance evaluation of highly sensitive hybrid sol-gel-derived oxygen sensor films based on a fluorinated precursor.

This paper describes the fabrication and performance of a range of highly sensitive luminescence-based oxygen sensor films based on the fluorinated sol-gel precursor 3,3,3-trifluoropropyltrimethoxysilane (TFP-TMOS). The oxygen-sensitive ruthenium complex [Ruthenium(II)-tris(4,7-diphenyl-1,10-phenanthroline)] dichloride, [Ru(dpp)(3)](2+) was entrapped in a wide range of ORMOSILs (organically modified silicates) matrices composed of alkyl and TFP-TMOS sol-gel precursors in different relative ratios. The influence of TFP-TMOS on sensor sensitivity, humidity-sensitivity and long-term stability was investigated and performance was compared to that of similar but non-fluorinated films. The optimum limit of detection was found to be 0.002% of oxygen for the propyltriethoxysilane (PTEOS)/TFP-TMOS-derived film compared to 0.09% for PTEOS-derived films reported previously. Photobleaching of the luminescent complex in fluorinated and non-fluorinated matrices was also investigated. It was established that photobleaching was reduced but not eliminated in fluorinated films. All films produced in this study exhibit very good reproducibility, reversibility, enhanced sensitivity, humidity-insensitivity and long-term stability.

[Nutrition evaluation of 13 years old adolescents from a little town]. / Sposób zywienia 13-letniej mlodziezy z malego miasta.

Food intake and Body Mass Index (BMI) as basic indicator of nourishment of adolescents from a little town in Wielkopolska were evaluated. Triple 24 hour recall was conducted in group of 30 girls and 30 boys 13 years old. Quality and quantity of food rations consumed was evaluated. Energy and 20 nutrient in ratios were assessed. Mean food rations were compared with dietary standards for such adolescents in Poland. It was found that investigated group of adolescents has improper eating habits resulting unsatisfactory low energy, macronutrients, vitamins and minerals intake. Results of anthropometric measurements have shown right body mass in 40% of adolescents, malnutrition in 37%, and tendency to overweight and obesity in 20% of boys and girls.

Breath-by-breath measurement of oxygen using a compact optical sensor.

We report on the development of a novel optical oxygen sensor for breath monitoring applications using the technique of phase fluorometry. The principal design criteria are that the system be compact, lightweight, and employ a disposable sensing element (while performing competitively with current commercial analyzers). The oxygen-sensitive, luminescent ruthenium complex Ru[dpp](3)(2+) is encapsulated in a sol-gel matrix and deposited onto a custom-designed, polymer sensor chip that provides significantly improved luminescence capture efficiency. The performance of the sensor module is characterized using a commercially available lung simulator. A resolution of 0.03% O(2) is achieved, which compares well with commercial breath monitoring systems and, when combined with its immunity to humidity and ability to respond effectively across a broad range of breathing rates, makes this device an extremely promising candidate for the development of a practical, low-cost biodiagnostic tool.

Novel hybrid optical sensor materials for in-breath O(2) analysis.

This study focuses on the optimisation and characterisation of novel, ORganically MOdified SILicate (ORMOSIL)-based, hybrid sensor films for use in the detection of O(2) on a breath-by-breath basis in human health monitoring applications. The sensing principle is based on the luminescence quenching of the O(2)-sensitive ruthenium complex [Ru(ii)-tris(4,7-diphenyl-1,10-phenanthroline)], which has been entrapped in a porous sol-gel film. The detection method employed is that of phase fluorometry using blue LED excitation and photodiode detection. Candidate sensor films include those based on the organosilicon precursors, methyltriethoxysilane, ethyltriethoxysilane, n-propyltriethoxysilane and phenyltriethoxysilane. While it has been established previously by the authors that these films exhibit a stable, highly sensitive response to O(2), this study focuses on selecting the material most suited for use in a breath monitor, based on the sensitivity, response time and humidity sensitivity of these films. Key parameters to be optimised include the O(2) sensitivity of the film and the film polarity, i.e. the degree of hydrophobicity. These parameters are directly linked to the precursors used. In this study a n-propyltriethoxysilane-derived O(2) sensor platform was selected as the optimum material for in-breath O(2) analysis due to its short response time, negligible humidity interference and suitable O(2) sensitivity in the relevant range in addition to its compatibility with a single-point calibration strategy.