Dermal uptake of nicotine from air and clothing: Experimental verification.

This study aims to elucidate in greater detail the dermal uptake of nicotine from air or from nicotine-exposed clothes, which was demonstrated recently in a preliminary study. Six non-smoking participants were exposed to gaseous nicotine (between 236 and 304 µg/m3 ) over 5 hours while breathing clean air through a hood. Four of the participants wore only shorts and 2 wore a set of clean clothes. One week later, 2 of the bare-skinned participants were again exposed in the chamber, but they showered immediately after exposure instead of the following morning. The 2 participants who wore clean clothes on week 1 were now exposed wearing a set of clothes that had been exposed to nicotine. All urine was collected for 84 hours after exposure and analyzed for nicotine and its metabolites, cotinine and 3OH-cotinine. All participants except those wearing fresh clothes excreted substantial amounts of biomarkers, comparable to levels expected from inhalation intake. Uptake for 1 participant wearing exposed clothes exceeded estimated intake via inhalation by >50%. Biomarker excretion continued during the entire urine collection period, indicating that nicotine accumulates in the skin and is released over several days. Absorbed nicotine was significantly lower after showering in 1 subject but not the other. Differences in the normalized uptakes and in the excretion patterns were observed among the participants. The observed cotinine half-lives suggest that non-smokers exposed to airborne nicotine may receive a substantial fraction through the dermal pathway. Washing skin and clothes exposed to nicotine may meaningfully decrease exposure.

Combined use of an electrostatic precipitator and a high-efficiency particulate air filter in building ventilation systems: Effects on cardiorespiratory health indicators in healthy adults.

High-efficiency particulate air (HEPA) filtration in combination with an electrostatic precipitator (ESP) can be a cost-effective approach to reducing indoor particulate exposure, but ESPs produce ozone. The health effect of combined ESP-HEPA filtration has not been examined. We conducted an intervention study in 89 volunteers. At baseline, the air-handling units of offices and residences for all subjects were comprised of coarse, ESP, and HEPA filtration. During the 5-week long intervention, the subjects were split into 2 groups, 1 with just the ESP removed and the other with both the ESP and HEPA removed. Each subject was measured for cardiopulmonary risk indicators once at baseline, twice during the intervention, and once 2 weeks after baseline conditions were restored. Measured indoor and outdoor PM2.5 and ozone concentrations, coupled with time-activity data, were used to calculate exposures. Removal of HEPA filters increased 24-hour mean PM2.5 exposure by 38 (95% CI: 31, 45) µg/m3 . Removal of ESPs decreased 24-hour mean ozone exposure by 2.2 (2.0, 2.5) ppb. No biomarkers were significantly associated with HEPA filter removal. In contrast, ESP removal was associated with a -16.1% (-21.5%, -10.4%) change in plasma-soluble P-selectin and a -3.0% (-5.1%, -0.8%) change in systolic blood pressure, suggesting reduced cardiovascular risks.

Growth of organic films on indoor surfaces.

We present a model for the growth of organic films on impermeable indoor surfaces. The model couples transport through a gas-side boundary layer adjacent to the surface with equilibrium partitioning of semivolatile organic compounds (SVOCs) between the gas phase and the surface film. Model predictions indicate that film growth would primarily be influenced by the gas-phase concentration of SVOCs with octanol-air partitioning (Koa ) values in the approximate range 10≤log Koa ≤13. Within the relevant range, SVOCs with lower values will equilibrate with the surface film more rapidly. Over time, the film becomes relatively enriched in species with higher log Koa values, while the proportion of gas-phase SVOCs not in equilibrium with the film decreases. Given stable airborne SVOC concentrations, films grow at faster rates initially and then subsequently diminish to an almost steady growth rate. Once an SVOC is equilibrated with the film, its mass per unit film volume remains constant, while its mass per unit area increases in proportion to overall film thickness. The predictions of the conceptual model and its mathematical embodiment are generally consistent with results reported in the peer-reviewed literature.

Human symptom responses to bioeffluents, short-chain carbonyls/acids, and long-chain carbonyls in a simulated aircraft cabin environment.

Occupants of aircraft have reported an array of symptoms related to general discomfort and irritation. Volatile organic compounds (VOCs) have been suggested to contribute to the reported symptoms. VOCs are from products used, bioeffluents from people and oxidation reaction products. Thirty-six healthy, young female subjects rated symptoms and environmental quality during an eight-hour exposure to groups of compounds often present in aircraft: (i) long-chain carbonyls, (ii) simulated bioeffluents, and (iii) short-chain carbonyls/organic acids. Statistically more symptoms were identified for the simulated bioeffluents and, to a lesser extent, short-chain carbonyls/organic acids compared to a control condition, although they remained in the acceptable range. There were three temporal patterns in the environmental quality and symptom reports: (i) an adaptive response (immediate increases followed by a decline); (ii) an apparent physiological effect (increases one to three hours into the exposure that remained elevated); and (iii) no statistical differences in reported environmental quality or symptom severity compared to the control air conditions. Typical concentrations found in aircraft can cause transitory symptoms in healthy individuals questioning the adequacy of current standards. Understanding the effects on individuals sensitive to air pollutants and methods to remove the compounds causing the greatest symptom responses are needed.

Fungal and bacterial growth in floor dust at elevated relative humidity levels.

Under sustained, elevated building moisture conditions, bacterial and fungal growth occurs. The goal of this study was to characterize microbial growth in floor dust at variable equilibrium relative humidity (ERH) levels. Floor dust from one home was embedded in coupons cut from a worn medium-pile nylon carpet and incubated at 50%, 80%, 85%, 90%, 95%, and 100% ERH levels. Quantitative PCR and DNA sequencing of ribosomal DNA for bacteria and fungi were used to quantify growth and community shifts. Over a 1-wk period, fungal growth occurred above 80% ERH. Growth rates at 85% and 100% ERH were 1.1 × 104 and 1.5 × 105 spore equivalents d-1 mg dust-1 , respectively. Bacterial growth occurred only at 100% ERH after 1 wk (9.0 × 104 genomes d-1 mg dust-1 ). Growth resulted in significant changes in fungal (P<.00001) and bacterial community structure (P<.00001) at varying ERH levels. Comparisons between fungal taxa incubated at different ERH levels revealed more than 100 fungal and bacterial species that were attributable to elevated ERH. Resuspension modeling indicated that more than 50% of airborne microbes could originate from the resuspension of fungi grown at ERH levels of 85% and above.

Dermal uptake of phthalates from clothing: Comparison of model to human participant results.

In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethylphthalate and di-n-butylphthalate (DnBP) than a previous model. The model predictions are consistent with the observation that previously exposed clothing can increase dermal uptake over that observed in bare-skin participants for the same exposure air concentrations. The model predicts that dermal uptake from clothing of DnBP is a substantial fraction of total uptake from all sources of exposure. For compounds that have high dermal permeability coefficients, dermal uptake is increased for (i) thinner clothing, (ii) a narrower gap between clothing and skin, and (iii) longer time intervals between laundering and wearing. Enhanced dermal uptake is most pronounced for compounds with clothing-air partition coefficients between 104 and 107 . In the absence of direct measurements of cotton cloth-air partition coefficients, dermal exposure may be predicted using equilibrium data for compounds in equilibrium with cellulose and water, in combination with computational methods of predicting partition coefficients.

Measurements of dermal uptake of nicotine directly from air and clothing.

In this preliminary study, we have investigated whether dermal uptake of nicotine directly from air or indirectly from clothing can be a meaningful exposure pathway. Two participants wearing only shorts and a third participant wearing clean cotton clothes were exposed to environmental tobacco smoke (ETS), generated by mechanically "smoking" cigarettes, for three hours in a chamber while breathing clean air from head-enveloping hoods. The average nicotine concentration (420 µg/m3 ) was comparable to the highest levels reported for smoking sections of pubs. Urine samples were collected immediately before exposure and 60 hour post-exposure for bare-skinned participants. For the clothed participant, post-exposure urine samples were collected for 24 hour. This participant then entered the chamber for another three-hour exposure wearing a hood and clothes, including a shirt that had been exposed for five days to elevated nicotine levels. The urine samples were analyzed for nicotine and two metabolites-cotinine and 3OH-cotinine. Peak urinary cotinine and 3OH-cotinine concentrations for the bare-skinned participants were comparable to levels measured among non-smokers in hospitality environments before smoking bans. The amount of dermally absorbed nicotine for each bare-skinned participant was conservatively estimated at 570 µg, but may have been larger. For the participant wearing clean clothes, uptake was ~20 µg, and while wearing a shirt previously exposed to nicotine, uptake was ~80 µg. This study demonstrates meaningful dermal uptake of nicotine directly from air or from nicotine-exposed clothes. The findings are especially relevant for children in homes with smoking or vaping.

Dermal uptake directly from air under transient conditions: advances in modeling and comparisons with experimental results for human subjects.

To better understand the dermal exposure pathway, we enhance an existing mechanistic model of transdermal uptake by including skin surface lipids (SSL) and consider the impact of clothing. Addition of SSL increases the overall resistance to uptake of SVOCs from air but also allows for rapid transfer of SVOCs to sinks like clothing or clean air. We test the model by simulating di-ethyl phthalate (DEP) and di-n-butyl phthalate (DnBP) exposures of six bare-skinned (Weschler et al. 2015, Environ. Health Perspect., 123, 928) and one clothed participant (Morrison et al. 2016, J. Expo. Sci. Environ. Epidemiol., 26, 113). The model predicts total uptake values that are consistent with the measured values. For bare-skinned participants, the model predicts a normalized mass uptake of DEP of 3.1 (µg/m2 )/(µg/m3 ), whereas the experimental results range from 1.0 to 4.3 (µg/m2 )/(µg/m3 ); uptake of DnBP is somewhat overpredicted: 4.6 (µg/m2 )/(µg/m3 ) vs. the experimental range of 0.5-3.2 (µg/m2 )/(µg/m3 ). For the clothed participant, the model predicts higher than observed uptake for both species. Uncertainty in model inputs, including convective mass transfer coefficients, partition coefficients, and diffusion coefficients, could account for overpredictions. Simulations that include transfer of skin oil to clothing improve model predictions. A dynamic model that includes SSL is more sensitive to changes that impact external mass transfer such as putting on and removing clothes and bathing.

Indoor inhalation intake fractions of fine particulate matter: review of influencing factors.

Exposure to fine particulate matter (PM2.5 ) is a major contributor to the global human disease burden. The indoor environment is of particular importance when considering the health effects associated with PM2.5 exposures because people spend the majority of their time indoors and PM2.5 exposures per unit mass emitted indoors are two to three orders of magnitude larger than exposures to outdoor emissions. Variability in indoor PM2.5 intake fraction (iFin,total ), which is defined as the integrated cumulative intake of PM2.5 per unit of emission, is driven by a combination of building-specific, human-specific, and pollutant-specific factors. Due to a limited availability of data characterizing these factors, however, indoor emissions and intake of PM2.5 are not commonly considered when evaluating the environmental performance of product life cycles. With the aim of addressing this barrier, a literature review was conducted and data characterizing factors influencing iFin,total were compiled. In addition to providing data for the calculation of iFin,total in various indoor environments and for a range of geographic regions, this paper discusses remaining limitations to the incorporation of PM2.5 -derived health impacts into life cycle assessments and makes recommendations regarding future research.

Roles of the human occupant in indoor chemistry.

Over the last decade, influences of the human occupant on indoor chemistry have been investigated in environments ranging from simulated aircraft cabins to actual classrooms. We have learned that ozone reacts rapidly with constituents of skin surface lipids on exposed skin, hair, and clothing, substantially reducing indoor ozone concentrations but increasing airborne levels of mono- and bifunctional compounds that contain carbonyl, carboxyl, or α-hydroxy ketone groups. Moreover, occupants transfer skin oils to and shed skin flakes (desquamation) onto indoor surfaces. Evidence for the presence of skin flakes/oils has been found in airborne particles, settled dust, and wipes of indoor surfaces. These occupant residues are also anticipated to scavenge ozone and produce byproducts. Under typical conditions, occupancy is anticipated to decrease the net level of oxidants in indoor air. When occupants scavenge ozone, the level of SOA derived from ozone/terpene chemistry decreases; the fraction of SVOCs in the gas-phase increases, and the fraction associated with airborne particles decreases. Occupants also remove organic compounds, including certain chemically active species, via bodily intake. Studies reviewed in this paper demonstrate the pronounced influences of humans on chemistry within the spaces they inhabit and the consequences of these influences on their subsequent chemical exposures.

Phthalate metabolites in urine samples from Beijing children and correlations with phthalate levels in their handwipes.

UNLABELLED: Little attention has been paid to dermal absorption of phthalates even though modeling suggests that this pathway may contribute meaningfully to total uptake. We have concurrently collected handwipe and urine samples from 39 Beijing children (5-9 years) for the purpose of measuring levels of five phthalates in handwipes, corresponding concentrations of eight of their metabolites in urine, and to subsequently assess the contribution of dermal absorption to total uptake. In summer sampling, DEHP was the most abundant phthalate in handwipes (median: 1130 µg/m(2) ), while MnBP was the most abundant metabolite in urine (median: 232 ng/ml). We found significant associations between the parent phthalate in handwipes and its monoester metabolite in urine for DiBP (r = 0.41, P = 0.01), DnBP (r = 0.50, P = 0.002), BBzP (r = 0.48, P = 0.003), and DEHP (r = 0.36, P = 0.03). Assuming that no dermal uptake occurred under clothing-covered skin, we estimate that dermal absorption of DiBP, DnBP, BBzP, and DEHP contributed 6.9%, 4.6%, 6.9%, and 3.3%, respectively, to total uptake. Assuming that somewhat attenuated dermal uptake occurred under clothing-covered skin, these estimates increase to 19%, 14%, 17%, and 10%. The results indicate that absorption from skin surfaces makes a meaningful contribution to total phthalate uptake for children and should be considered in future risk assessments. PRACTICAL IMPLICATIONS: This study indicates that children's hands acquire substantial amounts of various phthalates. The levels measured in handwipes, although higher, are somewhat representative of levels on other body locations. Via dermal absorption, as well as hand-to-mouth activity, phthalates on hands and other body locations contribute to the overall body burden of these compounds. Dermal absorption from air and contact transfer from surfaces is expected to occur for many SVOCs commonly found indoors (e.g. bisphenols, synthetic musks, organophosphates). However, the dermal pathway has often been neglected in exposure assessments of indoor pollutants. Knowledge regarding phthalates and other SVOCs in handwipes can facilitate our understanding of risks and aid in the mitigation of adverse health effects resulting from indoor exposures. To make progress toward these goals, further studies are necessary, including investigations of phthalate level variability in skinwipes collected at different locations on the body and the impact of clothing on dermal absorption from air.

Ultrafine particles from electric appliances and cooking pans: experiments suggesting desorption/nucleation of sorbed organics as the primary source.

Ultrafine particles are observed when metal surfaces, such as heating elements in electric appliances, or even empty cooking pans, are heated. The source of the particles has not been identified. We present evidence that particles >10 nm are not emitted directly from the heating elements or the metal surfaces. Using repeated heating of an electric burner, several types of cooking pans, and a steam iron, the increase in the number of particles (>10 nm) can be reduced to 0. After the devices are exposed to indoor air for several hours or days, subsequent heating results in renewed particle production, suggesting that organic matter has sorbed on their surfaces. Also, after a pan has been heated to the point that no increase in particles is observed, washing with detergent results in copious production of particles the next time the pan is heated. These observations suggest that detergent residue and organics sorbed from indoor air are the sources of the particles. We hypothesize that organic compounds are thermally desorbed from the hot surface as gaseous molecules; as they diffuse from the hot air near the pan into cooler air, selected compounds exceed their saturation concentration and nucleation occurs.

Associations between selected allergens, phthalates, nicotine, polycyclic aromatic hydrocarbons, and bedroom ventilation and clinically confirmed asthma, rhinoconjunctivitis, and atopic dermatitis in preschool children.

Previous studies, often using data from questionnaires, have reported associations between various characteristics of indoor environments and allergic disease. The aim of this study has been to investigate possible associations between objectively assessed indoor environmental factors and clinically confirmed asthma, rhinoconjunctivitis, and atopic dermatitis. The study is a cross-sectional case-control study of 500 children aged 3-5 years from Odense, Denmark. The 200 cases had at least two parentally reported allergic diseases, while the 300 controls were randomly selected from 2835 participating families. A single physician conducted clinical examinations of all 500 children. Children from the initially random control group with clinically confirmed allergic disease were subsequently excluded from the control group and admitted in the case group, leaving 242 in the healthy control group. For most children, specific IgE's against various allergens were determined. In parallel, dust samples were collected and air change rates were measured in the children's bedrooms. The dust samples were analyzed for phthalate esters, polycyclic aromatic hydrocarbons (PAH), nicotine, and various allergens. Among children diagnosed with asthma, concentrations of nicotine were higher (P < 0.05) and cat allergens were lower (P < 0.05) compared with the healthy controls; air change rates were lower for those sensitized (specific IgE+) compared with those not sensitized (specific IgE-, P < 0.05); and dust mite allergens were higher for specific IgE+ cases compared with healthy controls (P < 0.05). When disease status was based solely on questionnaire responses (as opposed to physician diagnosis), significant associations were found between di(2-ethylhexyl) phthalate (DEHP) and dog allergens in dust and current wheeze.

Predicting dermal absorption of gas-phase chemicals: transient model development, evaluation, and application.

UNLABELLED: A transient model is developed to predict dermal absorption of gas-phase chemicals via direct air-to-skin-to-blood transport under non-steady-state conditions. It differs from published models in that it considers convective mass-transfer resistance in the boundary layer of air adjacent to the skin. Results calculated with this transient model are in good agreement with the limited experimental results that are available for comparison. The sensitivity of the modeled estimates to key parameters is examined. The model is then used to estimate air-to-skin-to-blood absorption of six phthalate esters for scenarios in which (A) a previously unexposed occupant encounters gas-phase phthalates in three different environments over a single 24-h period; (B) the same as 'A', but the pattern is repeated for seven consecutive days. In the 24-h scenario, the transient model predicts more phthalate absorbed into skin and less absorbed into blood than would a steady-state model. In the 7-day scenario, results calculated by the transient and steady-state models converge over a time period that varies between 3 and 4 days for all but the largest phthalate (DEHP). Dermal intake is comparable to or larger than inhalation intake for DEP, DiBP, DnBP, and BBzP in Scenario 'A' and for all six phthalates in Scenario 'B'. PRACTICAL IMPLICATIONS: Dermal absorption from air has often been overlooked in exposure assessments. However, our transient model suggests that dermal intake of certain gas-phase phthalate esters is comparable to, or larger than, inhalation intake under commonly occurring indoor conditions. This may also be the case for other organic chemicals that have physicochemical properties that favor dermal absorption directly from air. Consequently, this pathway should be included in aggregate exposure and risk assessments. Furthermore, under conditions where the exposure concentrations are changing or there is insufficient time to achieve steady-state, the transient model presented in this study is more appropriate for estimating dermal absorption than is a steady-state model.

SVOC exposure indoors: fresh look at dermal pathways.

UNLABELLED: This paper critically examines indoor exposure to semivolatile organic compounds (SVOCs) via dermal pathways. First, it demonstrates that--in central tendency--an SVOC's abundance on indoor surfaces and in handwipes can be predicted reasonably well from gas-phase concentrations, assuming that thermodynamic equilibrium prevails. Then, equations are developed, based upon idealized mass-transport considerations, to estimate transdermal penetration of an SVOC either from its concentration in skin-surface lipids or its concentration in air. Kinetic constraints limit air-to-skin transport in the case of SVOCs that strongly sorb to skin-surface lipids. Air-to-skin transdermal uptake is estimated to be comparable to or larger than inhalation intake for many SVOCs of current or potential interest indoors, including butylated hydroxytoluene, chlordane, chlorpyrifos, diethyl phthalate, Galaxolide, geranyl acetone, nicotine (in free-base form), PCB28, PCB52, Phantolide, Texanol and Tonalide. Although air-to-skin transdermal uptake is anticipated to be slow for bisphenol A, we find that transdermal permeation may nevertheless be substantial following its transfer to skin via contact with contaminated surfaces. The paper concludes with explorations of the influence of particles and dust on dermal exposure, the role of clothing and bedding as transport vectors, and the potential significance of hair follicles as transport shunts through the epidermis. PRACTICAL IMPLICATIONS: Human exposure to indoor pollutants can occur through dietary and nondietary ingestion, inhalation, and dermal absorption. Many factors influence the relative importance of these pathways, including physical and chemical properties of the pollutants. This paper argues that exposure to indoor semivolatile organic compounds (SVOCs) through the dermal pathway has often been underestimated. Transdermal permeation of SVOCs can be substantially greater than is commonly assumed. Transport of SVOCs from the air to and through the skin is typically not taken into account in exposure assessments. Yet, for certain SVOCs, intake through skin is estimated to be substantially larger than intake through inhalation. Exposure scientists, risk assessors, and public health officials should be mindful of the dermal pathway when estimating exposures to indoor SVOCs. Also, they should recognize that health consequences vary with exposure pathway. For example, an SVOC that enters the blood through the skin does not encounter the same detoxifying enzymes that an ingested SVOC would experience in the stomach, intestines, and liver before it enters the blood.

Chemistry in indoor environments: 20 years of research.

UNLABELLED: In the two decades since the first issue of Indoor Air, there have been over 250 peer-reviewed publications addressing chemical reactions among indoor pollutants. The present review has assembled and categorized these publications. It begins with a brief account of the state of our knowledge in 1991 regarding 'indoor chemistry', much of which came from corrosion and art conservation studies. It then outlines what we have learned in the period between 1991 and 2010 in the context of the major reference categories: gas-phase chemistry, surface chemistry, health effects and reviews/workshops. The indoor reactions that have received the greatest attention are those involving ozone-with terpenoids in the gas-phase as well as with the surfaces of common materials, furnishings, and the occupants themselves. It has become clear that surface reactions often have a larger impact on indoor settings than do gas-phase processes. This review concludes with a subjective list of major research needs going forward, including more information on the decomposition of common indoor pollutants, better understanding of how sorbed water influences surface reactions, and further identification of short-lived products of indoor chemistry. Arguably, the greatest need is for increased knowledge regarding the impact that indoor chemistry has on the health and comfort of building occupants. PRACTICAL IMPLICATIONS: Indoor chemistry changes the type and concentration of chemicals present in indoor environments. In the past, products of indoor chemistry were often overlooked, reflecting a focus on stable, relatively non-polar organic compounds coupled with the use of sampling and analytical methods that were unable to 'see' many of the products of such chemistry. Today, researchers who study indoor environments are more aware of the potential for chemistry to occur. Awareness is valuable, because it leads to the use of sampling methods and analytical tools that can detect changes in indoor environments resulting from chemical processes. This, in turn, leads to a more complete understanding of occupants' chemical exposures, potential links between these exposures and adverse health effects and, finally, steps that might be taken to mitigate these adverse effects.

Ventilation rates and health: multidisciplinary review of the scientific literature.

UNLABELLED: The scientific literature through 2005 on the effects of ventilation rates on health in indoor environments has been reviewed by a multidisciplinary group. The group judged 27 papers published in peer-reviewed scientific journals as providing sufficient information on both ventilation rates and health effects to inform the relationship. Consistency was found across multiple investigations and different epidemiologic designs for different populations. Multiple health endpoints show similar relationships with ventilation rate. There is biological plausibility for an association of health outcomes with ventilation rates, although the literature does not provide clear evidence on particular agent(s) for the effects. Higher ventilation rates in offices, up to about 25 l/s per person, are associated with reduced prevalence of sick building syndrome (SBS) symptoms. The limited available data suggest that inflammation, respiratory infections, asthma symptoms and short-term sick leave increase with lower ventilation rates. Home ventilation rates above 0.5 air changes per hour (h(-1)) have been associated with a reduced risk of allergic manifestations among children in a Nordic climate. The need remains for more studies of the relationship between ventilation rates and health, especially in diverse climates, in locations with polluted outdoor air and in buildings other than offices. PRACTICAL IMPLICATIONS: Ventilation with outdoor air plays an important role influencing human exposures to indoor pollutants. This review and assessment indicates that increasing ventilation rates above currently adopted standards and guidelines should result in reduced prevalence of negative health outcomes. Building operators and designers should avoid low ventilation rates unless alternative effective measures, such as source control or air cleaning, are employed to limit indoor pollutant levels.

Reflections on the state of research: indoor environmental quality.

UNLABELLED: More than 30 years after the First International Indoor Climate Symposium, ten researchers from the USA, Slovakia, Sweden, and Denmark gathered to review the current status of indoor environmental research. We initiated our review with discussions during the 1-day meeting and followed that with parallel research and writing efforts culminating with internal review and revision cycles. In this paper, we present our choices for the most important research findings on indoor environmental quality from the past three decades followed by a discussion of the most important research questions in our field today. We then continue with a discussion on whether there are research areas for which we can 'close the book' and say that we already know what is needed. Finally, we discuss whether we can maintain our identity in the future or it is time to team up with new partners. PRACTICAL IMPLICATIONS: In the early years of this field, the accumulated knowledge was small and it was possible for any researcher to acquire a complete understanding. To do so has become impossible today as what we know has grown to exceed the learning capacity of any person. These circumstances challenge us to work collectively to synthesize what we do know and to define clearly what remains to be learned. If we fail to do these things well, we risk repeating research without memory, an inefficiency that we cannot afford.

Sensory pollution from bag filters, carbon filters and combinations.

UNLABELLED: Used ventilation filters are a major source of sensory pollutants in air handling systems. The objective of the present study was to evaluate the net effect that different combinations of filters had on perceived air quality after 5 months of continuous filtration of outdoor suburban air. A panel of 32 subjects assessed different sets of used filters and identical sets consisting of new filters. Additionally, filter weights and pressure drops were measured at the beginning and end of the operation period. The filter sets included single EU5 and EU7 fiberglass filters, an EU7 filter protected by an upstream pre-filter (changed monthly), an EU7 filter protected by an upstream activated carbon (AC) filter, and EU7 filters with an AC filter either downstream or both upstream and downstream. In addition, two types of stand-alone combination filters were evaluated: a bag-type fiberglass filter that contained AC and a synthetic fiber cartridge filter that contained AC. Air that had passed through used filters was most acceptable for those sets in which an AC filter was used downstream of the particle filter. Comparable air quality was achieved with the stand-alone bag filter that contained AC. Furthermore, its pressure drop changed very little during the 5 months of service, and it had the added benefit of removing a large fraction of ozone from the airstream. If similar results are obtained over a wider variety of soiling conditions, such filters may be a viable solution to a long recognized problem. PRACTICAL IMPLICATIONS: The present study was designed to address the emission of sensory offending pollutants from loaded ventilation filters. The goal was to find a low-polluting solution from commercially available products. The results indicate that the use of activated carbon (AC) filters downstream of fiberglass bag filters can reduce the degradation of air quality that occurs with increasing particle loading. A more practical solution, yet comparably effective, is a stand-alone particle filter that incorporates AC. In either case, further testing under a variety of conditions is recommended before making design decisions regarding the type of filters best suited to efficient building operation.

Influence of ozone-limonene reactions on perceived air quality.

UNLABELLED: This study conducted short-term assessments of perceived air quality (PAQ) for six different realistic concentrations of ozone and limonene, separately or together, in room air. The impact of filtration and the influence of the ozone generation method were also examined. The evaluations were made in four identical 40 m3 low-polluting test offices ventilated at 1.4 h(-1) or in two identical 30 m3 stainless-steel chambers ventilated at 1.9 h(-1). Concentrations of ozone, total volatile organic compounds and size-fractionated particles were continuously monitored in each experiment. The results indicate that, for each of the six conditions, the PAQ was poorer when ozone and limonene were present together compared with when only ozone or only limonene was present. In the test offices a correlation was observed between the number of secondary organic aerosols produced by a given ozone/limonene condition and the sensory pollution load for that condition. The particles themselves do not appear to be the primary causative agents, but instead are co-varying surrogates for sensory offending gas-phase species. PRACTICAL IMPLICATIONS: Although the health consequences of long-term exposures to the products of ozone-initiated indoor chemistry remain to be determined, we judge that the sensory offending nature of selected products provides an additional reason to limit indoor ozone levels. Devices that emit ozone at significant rates should not be used indoors. Ozone-filtration of make-up air should also be beneficial in mechanically ventilated buildings located in regions that repeatedly violate outdoor ozone standards. Additionally, the use of limonene containing products should be curtailed during periods when indoor ozone levels are elevated.