Comparison of Different Pulse Modulation Modes for Holmium:Yttrium-Aluminum-Garnet Laser Lithotripsy Ablation in a Benchtop Model.

Introduction: Manipulation of Holmium:Yttrium-Aluminum-Garnet laser parameters such as pulse energy (PE), frequency, and duration can impact laser lithotripsy ablation efficiency. In 2017, Lumenis introduced Moses™ Technology, which uses pulse modulation to enhance the delivery of energy from fiber to stone as well as to minimize stone retropulsion. Since the introduction of Moses Technology, other companies have brought additional pulse modulation concepts to market. The purpose of this in vitro study is to compare the pulse characteristics and stone ablation efficiency of Lumenis Moses Technology with Quanta's Vapor Tunnel™. Materials and Methods: Submerged BegoStone phantoms were systematically ablated using either the Lumenis Moses Pulse 120H or the Quanta Litho 100 clinical laser system. Two PEs (0.4 and 1 J), three fiber-stone standoff distances (SDs) (0.5, 1, 2 mm), and all available pulse duration and modulation modes for each laser were tested in combination. Fiber speed was adjusted to scan across the stone surface at either 1 or 10 pulses/mm to form single pulse craters or an ablation trough, respectively. Volumes of single craters and 1 mm trough segments were imaged and quantified using optical coherence tomography. Results: Ablation volumes decreased with decreasing PE and increasing SD. Statistically significant variability was seen between pulse types (PT) at every tested parameter set. Among pulse modulation modes, Moses Distance (MD) was superior at 0.5 mm in all testing and at 2 mm in trough testing. Vapor Tunnel (VT) was superior in 2 mm single crater testing. All modulated pulses performed similarly at 1 mm. Conclusions: In this benchtop model of laser lithotripsy, stone ablation was significantly impacted by PT. MD demonstrated superior or noninferior stone ablation at most tested parameters. VT maintained its efficacy the best as SD increased. Future work should focus on the mechanistic differences of these modes relative to other traditional laser pulse modes.

New devices for kidney stone management.

PURPOSE OF REVIEW: The purpose of this review is to summarize recent developments in the array of devices which are commonly used by urologists in the surgical management of kidney stones. To accomplish this goal, an extensive review of recent endourology literature, conference abstracts, and publicly available documents from manufacturers and the United States Food and Drug Administration was collected and reviewed. RECENT FINDINGS: Recent developments in the holmium:yttrium-aluminum-garnet (Ho:YAG) laser lithotripsy include the introduction of pulse modulation. This technique delivers the laser energy in an asymmetric manner such that an initial bubble is created (the 'Moses effect') through which the remainder of the energy can then travel through without being absorbed by surrounding water. Even more novel is the thulium fiber laser, which is produced in a fundamentally different way than traditional Ho:YAG lasers and is not yet available for clinical use. Finally, novel mechanical lithotrites which effectively combine ultrasonic energy, ballistic energy, and suction capability appear to be highly effective for stone clearance in recent benchtop and clinical studies. SUMMARY: With the introduction of both new modifications of time-tested technologies as well as completely novel modalities, the practicing urologist's armamentarium of devices for the surgical management of kidney stones continues to grow. As the popularity of 'mini' procedures continues to grow, the adaptability of these technologies to these procedures will be critical to maintain maximum relevance.