Adsorption Recycling and High-Value Reutilization of Heavy-Metal Ions from Wastewater: As a High-Performance Anode Lithium Battery.

The dazzling adsorbent products make people overlook the harm of heavy metals adsorbed on them. Hazardous waste adsorbents cause secondary pollution. In this study, waste lignocellulose was dissolved by alkaline urea solvent and high-intensity ultrasound, then cross-linked by epichlorohydrin to make hydrogel, which was utilized to adsorb toxic heavy-metal wastewater. In situ deposition and high-temperature carbonization turn the gel that has absorbed heavy metals into carbon aerogel-loaded metal oxide energy storage materials that may be employed as anodes in lithium-ion batteries with excellent electrochemical performance. The best reversible capacity was 435.86 mAh g-1 after 100 cycles at 0.2C, indicating that the hazardous solid waste generated by the removal of heavy metals using biomass-based adsorbent has potential lithium battery applications. Thus, we provide a fresh perspective on the efficient recycling of heavy metals as well as an environmentally friendly, high-value conservation strategy for lowering the danger of heavy-metal hazardous wastes.

Vacuum Steam Treatment of Metrosideros polymorpha Logs for Eradication of Ceratocystis huliohia and C. lukuohia.

A new and devastating disease, rapid ohia death (ROD), in Hawaii led to a state quarantine that regulates interisland transport of ohia wood and plant material to prevent spread of the causal pathogens. Heat treatments of ohia logs in commercial trade were considered for phytosanitary treatment. Vacuum steam (VS) was evaluated for its ability to eradicate the pathogens, Ceratocystis lukuohia and C. huliohia, in main stem logs from ROD-affected forest trees. Replicate loads of three debarked logs (24 to 43 cm in diameter, 1.7 to 2.0 m long) were VS treated at 56°C for 30 min (five loads) or 60°C for 60 min (four loads) at a sapwood depth equal to 70% of log radius. Percentage isolation of Ceratocystis from VS and ambient temperature logs before treatment and summarized by source tree ranged from 12 to 66% and 6 to 31% based on carrot baiting assays of tissue taken from outer and inner sapwood, respectively. No viable Ceratocystis was detected in sapwood locations for the 60°C/60 min schedule or inner locations for the 56°C/30 min schedule after treatment. Only one subsample (0.48%, n = 208) of the latter schedule treatment yielded Ceratocystis. Time needed for treatment ranged from 7.4 to 15 h for the 56°C/30 min schedule and from 8.6 to 19.2 h for the 60°C/60 min schedule. These results demonstrate that VS is an effective and efficient method for treating large-diameter ohia logs that mill owners and regulatory plant pathologists may consider for use in Hawaii.

Vacuum Steam Treatment Effectiveness for Eradication of the Thousand Cankers Disease Vector and Pathogen in Logs From Diseased Walnut Trees.

Logs of high-value eastern black walnut (Juglans nigra L.) are commonly exported from the United States for production of veneer and lumber. Veneer logs are not debarked to minimize degradation of wood quality and reduce moisture loss. Thousand cankers disease (TCD) is caused by the walnut twig beetle (Pityophthorus juglandis Blackman) and the fungal pathogen, Geosmithia morbida M. Kolarik, E. Freeland, C. Utley and N. Tisserat sp. nov., which colonize the inner bark of Juglans species. Effective eradication of these organisms by heat or chemical fumigation treatment is required for walnut logs prior to export. Because vacuum steam is an effective and efficient means of heating round wood, its use in eliminating the TCD causal agents was evaluated using Juglans logs (12- to 44-cm small end diameter and 1.7- to 1.9-m length) from TCD-symptomatic trees in Oregon and Washington State. Five replicate trials with three logs per load were conducted in a portable vacuum chamber to test two treatment schedules: 60°C for 60 min and 56°C for 30 min. Complete elimination of P. juglandis and G. morbida was achieved when using a minimum of 56°C at 5-cm targeted depth from bottom of bark furrow into the sapwood and held for 30 min. Treatment cycle time ranged from 298 to 576 min depending on log diameter and initial log temperature. Artificial inoculation of J. nigra trees with G. morbida within the TCD range in Pennsylvania was minimally successful in producing adequately colonized logs for experimental trials.

Vacuum Steam Treatment Eradicates Viable Bretziella fagacearum from Logs Cut from Wilted Quercus rubra.

Methyl bromide (MB) fumigation is required for U.S. Quercus log exports due to concern over unintentional spread of Bretziella fagacearum. MB alternatives are needed due to the chemical's ability to damage the earth's ozone layer. Vacuum steam (VS) is an environmentally friendly method that was evaluated for its ability to eradicate B. fagacearum in logs (24 to 61 cm diameter; 1.7 to 1.9 m long) obtained from Q. rubra that had wilted following natural infection (NI) or artificial inoculation (AI). Five replicate loads of two NI and one AI logs were VS-treated at 56°C for 30 min and 60°C for 60 min (at 5.0 cm sapwood depth). Mean frequencies of pretreatment fungus colonization ranged from 12.5 to 24.4% in NI and 29.4 to 45.6% in AI logs based on isolation from wood chips of inner and outer sapwood, respectively, of two disks per log. Frequencies of pathogen DNA detection were similar to those for isolation. No viable pathogen or its DNA were detected in posttreatment logs. Treatment times ranged from 5 to 9 h for the 56°C/30 min schedule and from 8 to 10 h for the 60°C/60 min schedule. Based on these results, VS is worthy of further development as a MB alternative.

Columbian black-tailed deer (Odocoileus hemionus columbianus) as hosts for Borrelia spp. in northern California.

The prevalence of infection of Columbian black-tailed deer (Odocoileus hemionus columbianus) with Borrelia spp. was evaluated in an area of northwestern California (USA) where Lyme disease is endemic and the relapsing-fever group spirochete Borrelia coriaceae is enzootic, and in a far-removed comparison area having a disparate climate and lower density of vector ticks. Blood samples collected from both deer herds in 1987, 1988, and from 2000-02 were assayed for borrelial infection with microscopic and molecular methods. Serum specimens from two (5%) of 39 deer from the Dye Creek Preserve in Tehama County versus 13 (20%) of 64 animals from the Hopland Research and Extension Center (HREC) in Mendocino County, California were polymerase chain reaction (PCR) test positive for B. burgdorferi sensu lato. DNA sequencing analyses revealed that eight animals were infected with B. bissettii, six with three unclassified genotypes, and one with B. burgdorferi sensu stricto. One serum sample (2%) from HREC was positive for a relapsing-fever group spirochete that had a 16S rRNA sequence homology of 99% with the C053 type strain of B. coriaceae. Spirochetes undetermined to geno-species were detected in thick-blood drops prepared from three (8%) of 36 deer from the HREC by direct immunofluorescence. Adults of the hippoboscid flies Lipoptena depressa (n=73) and Neolipoptena ferrisi (n=24), the Pacific Coast tick (Dermacentor occidentalis) (n=22), and the western black-legged tick (Ixodes pacificus) (n=1) that had been removed from deer from both study areas in 2002 were PCR test negative for borreliae. The occurrence of diverse borreliae in deer from northern California confounds and, consequently, reduces the utility of borrelial serosurveys for detecting specific genospecies, unless they are complemented by more specific assays (e.g., immunoblotting, PCR/sequencing analysis).