Core-shell microgels synthesized in continuous flow: deep insight into shell growth using temperature-dependent FTIR.

While core-shell microgels have been intensively studied in their fully synthesized state, the formation mechanism of the shell has not been completely understood. Such insight is decisive for a customization of microgel properties for applications. In this work, microgels based on a N-isopropylmethacrylamide (NiPMAM) core and a N-n-propylacrylamide (NnPAM) shell are synthesized in a continuous flow reactor. The shell growth is studied depending on the solution's time of residence inside the reactor. PCS experiments reveal a significant decrease of the volume phase transition temperatures of the core and the shell, with increasing residence time. At early stages, a decreased swelling capacity is found before a discrete NnPAM shell is formed. Temperature-dependent FTIR spectroscopy shows that the decreased swelling capacity originates from a pronounced interpenetrated network (IPN) between NnPAM and NiPMAM. AFM images resolve heterogeneously distributed shell material after 3 min, pointing to an aggregation of NnPAM domains before the distinct shell forms. The combination of diffusional properties, AFM images and vibrational information confirms a deeply interpenetrated network already at early stages of the precipitation polymerization, in which the shell material heavily influences the swelling properties.

Smart membranes by electron beam cross-linking of copolymer microgels.

Poly(N-isopropylacrylamide) (pNIPAM) based copolymer microgels were used to create free-standing, transferable, thermoresponsive membranes. The microgels were synthesized by copolymerization of NIPAM with N-benzylhydrylacrylamide (NBHAM). Monolayers of these colloidal gels were subsequently cross-linked using an electron gun leading to the formation of a connected monolayer. Furthermore, the cross-linked microgel layer is detached from the supporting material by dissolving the substrate. These unique systems can be used as transferable, thermoresponsive coatings and as thermoresponsive membranes. As a proof of principle for the use of such membranes we studied the ion transport through them at different temperatures revealing drastic changes when the lower critical solution temperature of the copolymer microgels is reached.

Core-shell microgels as thermoresponsive carriers for catalytic palladium nanoparticles.

Responsive core-shell microgels are promising systems for a stabilization of Pd nanoparticles and control of their catalytic activity. Here, poly-N-n-propylacrylamide (PNNPAM) was copolymerized with methacrylic acid to yield microgel core particles, which were subsequently coated with an additional, acid-free poly-N-isopropylmethacrylamide (PNIPMAM) shell. Both core and core-shell systems were used as pH- and temperature-responsive carrier systems for the incorporation of palladium nanoparticles. The embedded nanoparticles were found to have a uniform size distribution with diameters at around 20 nm. Their catalytic activity was investigated by following the kinetics of the reduction of p-nitrophenol to p-aminophenol using UV-vis spectroscopy. For the PNNPAM microgel core, the temperature dependence of the rate constant followed the Arrhenius equation, which is an unusual behaviour for thermoresponsive carrier systems but common for passive systems such as polyelectrolyte brushes. In contrast, the catalytic activity of nanoparticles embedded in microgel core-shell systems decreased drastically at the volume phase transition temperature (44 °C) of the PNIPMAM shell. Accordingly, a promising architecture of passive nanoparticle-carrying core and thermoresponsive shell was realized successfully.

Contrast variation SANS measurement of shell monomer density profiles of smart core-shell microgels.

The radial density profile of deuterated poly(N,n-propyl acrylamide) shell monomers within core-shell microgels has been studied by small-angle neutron scattering in order to shed light on the origin of their linear thermally-induced swelling. The poly(N-isopropyl methacrylamide) core monomers have been contrast-matched by the H2O/D2O solvent mixture, and the intensity thus provides a direct measurement of the spatial distribution of the shell monomers. Straightforward modelling shows that their structure does not correspond to the expected picture of a well-defined external shell. A multi-shell model solved by a reverse Monte Carlo approach is then applied to extract the monomer density as a function of temperature and of the core crosslinking. It is found that most shell monomers fill the core at high temperatures approaching synthesis conditions of collapsed particles, forming only a dilute corona. As the core monomers tend to swell at lower temperatures, a skeleton of insoluble shell monomers hinders swelling, inducing the progressive linear thermoresponse.

Spatial distribution of core monomers in acrylamide-based core-shell microgels with linear swelling behaviour.

The peculiar linear temperature-dependent swelling of core-shell microgels has been conjectured to be linked to the core-shell architecture combining materials of different transition temperatures. Here the structure of pNIPMAM-core and pNNPAM-shell microgels in water is studied as a function of temperature using small-angle neutron scattering with selective deuteration. Photon correlation spectroscopy is used to scrutinize the swelling behaviour of the colloidal particles and reveals linear swelling. Moreover, these experiments are also employed to check the influence of deuteration on swelling. Using a form-free multi-shell reverse Monte Carlo approach, the small-angle scattering data are converted into radial monomer density profiles. The comparison of 'core-only' particles consisting of identical cores to fully hydrogenated core-shell microgels, and finally to H-core/D-shell architectures unambiguously shows that core and shell monomers display gradient profiles with strong interpenetration, leading to cores embedded in shells which are bigger than their isolated 'core-only' precursor particles. This surprising result is further generalized to different core cross-linker contents, for temperature ranges encompassing both transitions. Our analysis demonstrates that the internal structure of pNIPMAM-core and pNNPAM-shell microgels is heterogeneous and strongly interpenetrated, presumably allowing only progressive core swelling at temperatures intermediate to both transition temperatures, thus promoting linear swelling behaviour.

Synthesis of smart dual-responsive microgels: correlation between applied surfactants and obtained particle morphology.

Thermo- and pH-responsive copolymer microgels were obtained by surfactant-assisted precipitation polymerization of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc). The surfactants used were sodium dodecylsulfate (SDS), dodecyltrimethylammonium bromide (DTAB) and the nonionic n-octyl-ß-d-glucopyranoside (C8G1). We investigate the influence of the surfactants on the acrylic acid incorporation rate, the particle size, particle morphology, and the swelling behaviour at pH 4 and pH 7, at which AAc is neutral or charged, respectively. It is shown that each surfactant has a specific influence, which is connected to its role in the polymerization mechanism and its charge. A combined FTIR and PCS study reveals that the particles undergo a temperature-induced change in microstructure, even if the particle hydrodynamic radius does not change significantly.

Deuteration-Induced Volume Phase Transition Temperature Shift of PNIPMAM Microgels.

The effect of deuteration on the volume phase transition (VPT) temperature of poly (N-isopropylmethacrylamide) (pNIPMAM) microgels in aqueous suspension is determined via IR spectroscopy and size measurements by photon correlation spectroscopy (PCS). We study the effect of a hydrogenated and a deuterated solvent (H2O/D2O), and of the hydrogenated and (partially) deuterated monomer. Deuteration of the monomer or copolymerization with deuterated monomers shifts the volume phase transition temperature (VPTT) by up to 8.4 K to higher temperatures, in good agreement with known results for pNIPAM microgels. Moreover, the shape of the swelling curve is found to depend on deuteration, with the highest deuteration leading to the sharpest VPT. Finally, the quantitative agreement between FTIR spectroscopy and PCS evidences the spatial homogeneity of the microgel particles. Our results are rationalized in terms of the effect of deuteration on hydrogen bonding. They shall be of primary importance for any experimental measurements close to the VPT involving isotopic substitution, and in particular contrast variation small angle neutron scattering.

Swelling behaviour of core-shell microgels in H2O, analysed by temperature-dependent FTIR spectroscopy.

Stimuli-responsive microgels are colloidal particles and promising candidates for applications such as targeted drug delivery, matrices for catalysts, nanoactuators and smart surface coatings. To tailor the response, the architecture of microgels is of paramount importance with respect to these applications. Statistical copolymer microgels based on N-isopropylmethacrylamide (NiPMAM) and N-n-propylacrylamide (NnPAM) show a cooperative phase transition leading to a collapse at a specific temperature. Interestingly, some core-shell microgel particles reveal a linear response of the hydrodynamic radius with temperature. Such observations were made by photon correlation spectroscopy (PCS), which is limited to the diffusion properties dominated by the particle shell. In this work we investigate the molecular hydration within the network of microgels in H2O by temperature-dependent FTIR spectroscopy. The phase transition temperature was determined by the shift in frequency of the NH bending vibration in homopolymer and statistical copolymer microgels and the results are in accordance with those from PCS. In contrast, experiments on core-shell particles show a broadening and shift of the respective phase transition temperatures of the core and shell indicating an interaction of the core and shell polymers on a molecular level that extends far into the core. In conclusion, temperature-dependent FTIR spectroscopy is a convenient approach to elucidate the internal architecture of complex microgel particles in H2O.

Determination of Internal Density Profiles of Smart Acrylamide-Based Microgels by Small-Angle Neutron Scattering: A Multishell Reverse Monte Carlo Approach.

The internal structure of nanometric microgels in water has been studied as a function of temperature, cross-linker content, and level of deuteration. Small-angle neutron scattering from poly( N-isopropylmethacrylamide) (volume phase transition ≈ 44 °C) microgel particles of radius well below 100 nm in D2O has been measured. The intensities have been analyzed with a combination of polymer chain scattering and form-free radial monomer volume fraction profiles defined over spherical shells, taking polydispersity in size of the particles determined by atomic force microscopy into account. A reverse Monte Carlo optimization using a limited number of parameters was developed to obtain smoothly decaying profiles in agreement with the experimentally scattered intensities. The results are compared to the swelling curve of microgel particles in the temperature range from 15 to 55 °C obtained from photon correlation spectroscopy (PCS). In addition to hydrodynamic radii measured by PCS, our analysis provides direct information about the internal water content and gradients, the strongly varying steepness of the density profile at the particle-water interface, the total spatial extension of the particles, and the visibility of chains. The model has also been applied to a variation of the cross-linker content, N, N'-methylenebisacrylamide, from 5 to 15 mol %, providing insight on the impact of chain architecture and cross-linking on water uptake and on the definition of the polymer-water interface. The model can easily be generalized to arbitrary monomer contents and types, in particular mixtures of hydrogenated and deuterated species, paving the way to detailed studies of monomer distributions inside more complex microgels, in particular core-shell particles.

Boreal pollen contain ice-nucleating as well as ice-binding 'antifreeze' polysaccharides.

Ice nucleation and growth is an important and widespread environmental process. Accordingly, nature has developed means to either promote or inhibit ice crystal formation, for example ice-nucleating proteins in bacteria or ice-binding antifreeze proteins in polar fish. Recently, it was found that birch pollen release ice-nucleating macromolecules when suspended in water. Here we show that birch pollen washing water exhibits also ice-binding properties such as ice shaping and ice recrystallization inhibition, similar to antifreeze proteins. We present spectroscopic evidence that both the ice-nucleating as well as the ice-binding molecules are polysaccharides bearing carboxylate groups. The spectra suggest that both polysaccharides consist of very similar chemical moieties, but centrifugal filtration indicates differences in molecular size: ice nucleation occurs only in the supernatant of a 100 kDa filter, while ice shaping is strongly enhanced in the filtrate. This finding may suggest that the larger ice-nucleating polysaccharides consist of clusters of the smaller ice-binding polysaccharides, or that the latter are fragments of the ice-nucleating polysaccharides. Finally, similar polysaccharides released from pine and alder pollen also display both ice-nucleating as well as ice-binding ability, suggesting a common mechanism of interaction with ice among several boreal pollen with implications for atmospheric processes and antifreeze protection.