A New Mode of Chemical Reactivity for Metal-Free Hydrogen Activation by Lewis Acidic Boranes.

We herein explore whether tris(aryl)borane Lewis acids are capable of cleaving H2 outside of the usual Lewis acid/base chemistry described by the concept of frustrated Lewis pairs (FLPs). Instead of a Lewis base we use a chemical reductant to generate stable radical anions of two highly hindered boranes: tris(3,5-dinitromesityl)borane and tris(mesityl)borane. NMR spectroscopic characterization reveals that the corresponding borane radical anions activate (cleave) dihydrogen, whilst EPR spectroscopic characterization, supported by computational analysis, reveals the intermediates along the hydrogen activation pathway. This radical-based, redox pathway involves the homolytic cleavage of H2 , in contrast to conventional models of FLP chemistry, which invoke a heterolytic cleavage pathway. This represents a new mode of chemical reactivity for hydrogen activation by borane Lewis acids.

"Janus" Calixarenes: Double-Sided Molecular Linkers for Facile, Multianchor Point, Multifunctional, Surface Modification.

We herein report the synthesis of novel "Janus" calix[4]arenes bearing four "molecular tethering" functional groups on either the upper or lower rims of the calixarene. These enable facile multipoint covalent attachment to electrode surfaces with monolayer coverage. The other rim of the calixarenes bear either four azide or four ethynyl functional groups, which are easily modified by the copper(I)-catalyzed azide-alkyne cycloaddition reaction (CuAAC), either pre- or postsurface modification, enabling these conical, nanocavity reactor sites to be decorated with a wide range of substrates to impart desired chemical properties. Redox active species decorating the peripheral rim are shown to be electrically connected by the calixarene to the electrode surface in either "up" or "down" orientations of the calixarene.

Teaching old compounds new tricks: efficient N2 fixation by simple Fe(N2)(diphosphine)2 complexes.

The Fe(0) species Fe(N2)(dmpe)2 exists in equilibrium with the previously unreported dimer, [Fe(dmpe2)2(µ-N2)]. For the first time these complexes, alongside Fe(N2)(depe)2, are shown unambiguously to produce N2H4 and/or NH3 upon addition of triflic acid; for Fe(N2)(depe)2 this represents one of the highest electron conversion efficiencies for Fe complexes to date.

Novel B(Ar')2(Ar'') hetero-tri(aryl)boranes: a systematic study of Lewis acidity.

A series of homo- and hetero-tri(aryl)boranes incorporating pentafluorophenyl, 3,5-bis(trifluoromethyl)phenyl, and pentachlorophenyl groups, four of which are novel species, have been studied as the acidic component of frustrated Lewis pairs for the heterolytic cleavage of H2. Under mild conditions eight of these will cleave H2; the rate of cleavage depending on both the electrophilicity of the borane and the steric bulk around the boron atom. Electrochemical studies allow comparisons of the electrophilicity with spectroscopic measurements of Lewis acidity for different series of boranes. Discrepancies in the correlation between these two types of measurements, combined with structural characterisation of each borane, reveal that the twist of the aryl rings with respect to the boron-centred trigonal plane is significant from both a steric and electronic perspective, and is an important consideration in the design of tri(aryl)boranes as Lewis acids.

Exploring structural and electronic effects in three isomers of tris{bis(trifluoromethyl)phenyl}borane: towards the combined electrochemical-frustrated Lewis pair activation of H2.

Three structural isomers of tris{bis(trifluoromethyl)phenyl}borane have been studied as the acidic component of frustrated Lewis pairs. While the 3,5-substituted isomer is already known to heterolytically cleave H2 to generate a bridging-hydride; ortho-substituents in the 2,4- and 2,5-isomers quench such reactivity through electron donation into the vacant boron pz orbital and steric blocking of the boron centre; as shown by electrochemical, structural and computational studies. Electrochemical studies of the corresponding borohydrides identify that the two-electron oxidation of terminal-hydrides occurs at more positive potentials than observed for [HB(C6F5)3](-), while the bridging-hydride oxidizes at a higher potential still, comparable to that of free H2.

Metal-free electrocatalytic hydrogen oxidation using frustrated Lewis pairs and carbon-based Lewis acids.

Whilst hydrogen is a potentially clean fuel for energy storage and utilisation technologies, its conversion to electricity comes at a high energetic cost. This demands the use of rare and expensive precious metal electrocatalysts. Electrochemical-frustrated Lewis pairs offer a metal-free, CO tolerant pathway to the electrocatalysis of hydrogen oxidation. They function by combining the hydrogen-activating ability of frustrated Lewis pairs (FLPs) with electrochemical oxidation of the resultant hydride. Here we present an electrochemical-FLP approach that utilises two different Lewis acids - a carbon-based N-methylacridinium cation that possesses excellent electrochemical attributes, and a borane that exhibits fast hydrogen cleavage kinetics and functions as a "hydride shuttle". This synergistic interaction provides a system that is electrocatalytic with respect to the carbon-based Lewis acid, decreases the required potential for hydrogen oxidation by 1 V, and can be recycled multiple times.

Facile Protocol for Water-Tolerant "Frustrated Lewis Pair"-Catalyzed Hydrogenation.

Despite rapid advances in the field of metal-free, "frustrated Lewis pair" (FLP)-catalyzed hydrogenation, the need for strictly anhydrous reaction conditions has hampered wide-scale uptake of this methodology. Herein, we report that, despite the generally perceived moisture sensitivity of FLPs, 1,4-dioxane solutions of B(C6F5)3 actually show appreciable moisture tolerance and can catalyze hydrogenation of a range of weakly basic substrates without the need for rigorously inert conditions. In particular, reactions can be performed directly in commercially available nonanhydrous solvents without subsequent drying or use of internal desiccants.

Synthesis, Photochemical, and Redox Properties of Gold(I) and Gold(III) Pincer Complexes Incorporating a 2,2':6',2"-Terpyridine Ligand Framework.

Reaction of [Au(C6F5)(tht)] (tht = tetrahydrothiophene) with 2,2':6',2"-terpyridine (terpy) leads to complex [Au(C6F5)(η(1)-terpy)] (1). The chemical oxidation of complex (1) with 2 equiv of [N(C6H4Br-4)3](PF6) or using electrosynthetic techniques affords the Au(III) complex [Au(C6F5)(η(3)-terpy)](PF6)2 (2). The X-ray diffraction study of complex 2 reveals that the terpyridine acts as tridentate chelate ligand, which leads to a slightly distorted square-planar geometry. Complex 1 displays fluorescence in the solid state at 77 K due to a metal (gold) to ligand (terpy) charge transfer transition, whereas complex 2 displays fluorescence in acetonitrile due to excimer or exciplex formation. Time-dependent density functional theory calculations match the experimental absorption spectra of the synthesized complexes. In order to further probe the frontier orbitals of both complexes and study their redox behavior, each compound was separately characterized using cyclic voltammetry. The bulk electrolysis of a solution of complex 1 was analyzed by spectroscopic methods confirming the electrochemical synthesis of complex 2.

A combined "electrochemical-frustrated lewis pair" approach to hydrogen activation: surface catalytic effects at platinum electrodes.

Herein, we extend our "combined electrochemical-frustrated Lewis pair" approach to include Pt electrode surfaces for the first time. We found that the voltammetric response of an electrochemical-frustrated Lewis pair (FLP) system involving the B(C6 F5 )3 /[HB(C6 F5 )3 ](-) redox couple exhibits a strong surface electrocatalytic effect at Pt electrodes. Using a combination of kinetic competition studies in the presence of a H atom scavenger, 6-bromohexene, and by changing the steric bulk of the Lewis acid borane catalyst from B(C6 F5 )3 to B(C6 Cl5 )3 , the mechanism of electrochemical-FLP reactions on Pt surfaces was shown to be dominated by hydrogen-atom transfer (HAT) between Pt, [PtH] adatoms and transient [HB(C6 F5 )3 ](⋅) electrooxidation intermediates. These findings provide further insight into this new area of combining electrochemical and FLP reactions, and proffers additional avenues for exploration beyond energy generation, such as in electrosynthesis.

Metal-free dihydrogen oxidation by a borenium cation: a combined electrochemical/frustrated Lewis pair approach.

In order to use H2 as a clean source of electricity, prohibitively rare and expensive precious metal electrocatalysts, such as Pt, are often used to overcome the large oxidative voltage required to convert H2 into 2 H(+) and 2 e(-). Herein, we report a metal-free approach to catalyze the oxidation of H2 by combining the ability of frustrated Lewis pairs (FLPs) to heterolytically cleave H2 with the in situ electrochemical oxidation of the resulting borohydride. The use of the NHC-stabilized borenium cation [(IiPr2)(BC8H14)](+) (IiPr2=C3H2(NiPr)2, NHC=N-heterocyclic carbene) as the Lewis acidic component of the FLP is shown to decrease the voltage required for H2 oxidation by 910 mV at inexpensive carbon electrodes, a significant energy saving equivalent to 175.6 kJ mol(-1). The NHC-borenium Lewis acid also offers improved catalyst recyclability and chemical stability compared to B(C6F5)3, the paradigm Lewis acid originally used to pioneer our combined electrochemical/frustrated Lewis pair approach.

An electrochemical study of frustrated Lewis pairs: a metal-free route to hydrogen oxidation.

Frustrated Lewis pairs have found many applications in the heterolytic activation of H2 and subsequent hydrogenation of small molecules through delivery of the resulting proton and hydride equivalents. Herein, we describe how H2 can be preactivated using classical frustrated Lewis pair chemistry and combined with in situ nonaqueous electrochemical oxidation of the resulting borohydride. Our approach allows hydrogen to be cleanly converted into two protons and two electrons in situ, and reduces the potential (the required energetic driving force) for nonaqueous H2 oxidation by 610 mV (117.7 kJ mol(-1)). This significant energy reduction opens routes to the development of nonaqueous hydrogen energy technology.

The formazanate ligand as an electron reservoir: bis(formazanate) zinc complexes isolated in three redox states.

The synthesis of bis(formazanate) zinc complexes is described. These complexes have well-behaved redox-chemistry, with the ligands functioning as a reversible electron reservoir. This allows the synthesis of bis(formazanate) zinc compounds in three redox states in which the formazanate ligands are reduced to "metallaverdazyl" radicals. The stability of these ligand-based radicals is a result of the delocalization of the unpaired electron over four nitrogen atoms in the ligand backbone. The neutral, anionic, and dianionic compounds (L2 Zn(0/-1/-2)) were fully characterized by single-crystal X-ray crystallography, spectroscopic methods, and DFT calculations. In these complexes, the structural features of the formazanate ligands are very similar to well-known ß-diketiminates, but the nitrogen-rich (NNCNN) backbone of formazanates opens the door to redox-chemistry that is otherwise not easily accessible.

Electrochemistry of Au(II) and Au(III) pincer complexes: determination of the Au(II)-Au(II) bond energy.

The bond energy of the unsupported Au-Au bond in the Au(ii) dimer [(C(∧)N(∧)C)Au]2 and the difference between Au(III)-OH and Au(III)-H bond enthalpies have been determined experimentally by electrochemical methods, with Au-OH and Au-H complexes showing unexpected differences in their reduction pathways, supported by DFT modelling.

Exploring the fate of the tris(pentafluorophenyl)borane radical anion in weakly coordinating solvents.

We report a kinetic and mechanistic study into the one-electron reduction of the archetypal Lewis acid tris(pentafluorophenyl)borane, B(C(6)F(5))(3), in dichloromethane and 1,2-difluorobenzene. Electrochemical experiments, combined with digital simulations, DFT computational studies and multinuclear NMR analysis allow us to obtain thermodynamic, kinetic and mechanistic information relating to the redox activity of B(C(6)F(5))(3). We show that tris(pentafluorophenyl)borane undergoes a quasi-reversible one-electron reduction followed by rapid chemical decomposition of the B(C(6)F(5))(3)˙(-) radical anion intermediate via a solvolytic radical pathway. The reaction products form various four-coordinate borates of which [B(C(6)F(5))(4)](-) is a very minor product. The rate of the follow-up chemical step has a pseudo-first order rate constant of the order of 6 s(-1). This value is three orders of magnitude larger than that found in previous studies performed in the donor solvent, tetrahydrofuran. The standard reduction potential of B(C(6)F(5))(3) is reported for the first time as -1.79 ± 0.1 V and -1.65 ± 0.1 V vs. ferrocene/ferrocenium in dichloromethane and 1,2-difluorobenzene respectively.

Synthesis and characterization of carbon nanotubes covalently functionalized with amphiphilic polymer coated superparamagnetic nanocrystals.

Herein, we report the synthesis of three covalently linked superparamagnetic nanocrystal-multi-walled carbon nanotube (MWCNT) composites. A generic strategy for amphiphilic polymer coating of nanocrystals and further functionalization for amide bond formation with the MWCNTs is discussed. This approach can in principle allow attachment of any colloidal nanocrystal to the MWCNTs. The materials were characterized at each stage of the syntheses using DLS, zeta-potential measurements, FT-IR, TEM, and XPS techniques. The practicality of this linkage is demonstrated by the reversible magnetic immobilization of these materials on an electrode during non-aqueous electrochemistry.

Adsorption of bismuth ions on graphite chemically modified with gallic acid.

Graphite modified with gallic acid to form 'gallic acid-carbon' is demonstrated to be efficient for the removal of bismuth(III) ions from aqueous solutions. The uptake is demonstrated to be rapid but not to follow standard adsorption isotherm models. Instead, the uptake was found to be further promoted by the presence of the adsorbed metal. Additionally, the bismuth uptake showed linear dependence on the square of its concentration suggesting the possible formation of polymeric bismuth species. The gallic acid-carbon shows great promise as a relatively inexpensive material for solid-phase extraction and water purification with extraction efficiency close to 98%.

Separating electrophilicity and Lewis acidity: the synthesis, characterization, and electrochemistry of the electron deficient tris(aryl)boranes B(C6F5)(3-n)(C6Cl5)n (n = 1-3).

A new family of electron-deficient tris(aryl)boranes, B(C(6)F(5))(3-n)(C(6)Cl(5))(n) (n = 1-3), has been synthesized, permitting an investigation into the steric and electronic effects resulting from the gradual replacement of C(6)F(5) with C(6)Cl(5) ligands. B(C(6)F(5))(2)(C(6)Cl(5)) (3) is accessed via C(6)Cl(5)BBr(2), itself prepared from donor-free Zn(C(6)Cl(5))(2) and BBr(3). Reaction of C(6)Cl(5)Li with BCl(3) in a Et(2)O/hexane slurry selectively produced B(C(6)Cl(5))(2)Cl, which undergoes B-Cl exchange with CuC(6)F(5) to afford B(C(6)F(5))(C(6)Cl(5))(2) (5). While 3 forms a complex with H(2)O, which can be rapidly removed under vacuum or in the presence of molecular sieves, B(C(6)Cl(5))(3) (6) is completely stable to refluxing toluene/H(2)O for several days. Compounds 3, 5, and 6 have been structurally characterized using single crystal X-ray diffraction and represent the first structure determinations for compounds featuring B-C(6)Cl(5) bonds; each exhibits a trigonal planar geometry about B, despite having different ligand sets. The spectroscopic characterization using (11)B, (19)F, and (13)C NMR indicates that the boron center becomes more electron-deficient as n increases. Optimized structures of B(C(6)F(5))(3-n)(C(6)Cl(5))(n) (n = 0-3) using density functional theory (B3LYP/TZVP) are all fully consistent with the experimental structural data. Computed (11)B shielding constants also replicate the experimental trend almost quantitatively, and the computed natural charges on the boron center increase in the order n = 0 (0.81) < n = 1 (0.89) < n = 2 (1.02) < n = 3 (1.16), supporting the hypothesis that electrophilicity increases concomitantly with substitution of C(6)F(5) for C(6)Cl(5). The direct solution cyclic voltammetry of B(C(6)F(5))(3) has been obtained for the first time and electrochemical measurements upon the entire series B(C(6)F(5))(3-n)(C(6)Cl(5))(n) (n = 0-3) corroborate the spectroscopic data, revealing C(6)Cl(5) to be a more electron-withdrawing group than C(6)F(5), with a ca. +200 mV shift observed in the reduction potential per C(6)F(5) group replaced. Conversely, use of the Guttmann-Beckett and Childs' methods to determine Lewis acidity on B(C(6)F(5))(3), 3, and 5 showed this property to diminish with increasing C(6)Cl(5) content, which is attributed to the steric effects of the bulky C(6)Cl(5) substituents. This conflict is ascribed to the minimal structural reorganization in the radical anions upon reduction during cyclic voltammetric experiments. Reduction of 6 using Na((s)) in THF results in a vivid blue paramagnetic solution of Na(+) [6](•-); the EPR signal of Na(+)[6](•-) is centered at g = 2.002 with a((11)B) 10G. Measurements of the exponential decay of the EPR signal (298 K) reveal [6](•-) to be considerably more stable than its perfluoro analogue.

Generator-collector experiments at a single electrode: exploring the general applicability of this approach by comparing the performance of surface immobilized versus solution phase sensing molecules.

We demonstrate proof-of-concept that generator-collector experiments can be performed at a single macroelectrode and used to determine mechanistic information. The practical advantages of such a system over conventional generator-collector techniques are also outlined. The single-electrode generator-collector technique is applied to study the known mechanism of oxygen reduction in aqueous conditions as a model system. We seek to demonstrate that the single-electrode generator-collector approach is capable of detecting local pH changes, immediately adjacent to the electrode surface during a redox reaction. Experiments are performed using a molecular pH probe attached to the electrode surface. Comparison of experimental data with numerical simulations verifies that the reduction of oxygen at pH 6.8 proceeds via a two-electron, two-proton mechanism. Experiments were also performed with a molecular pH probe dissolved in the electrolyte solution in order to explore the feasibility of this approach, which is potentially applicable to a much wider range of electrochemical systems.

Building block syntheses of gallic acid monomers and tris-(O-gallyl)-gallic acid dendrimers chemically attached to graphite powder: a comparative study of their uptake of Al(III) ions.

A synthesis of graphite powder covalently modified with gallic acid (3,4,5-trihydroxybenzoic acid), via a 1,2-diaminoethane "linker" molecule, to form gallylaminoethylaminocarbonyl graphite (gallic-carbon) is reported. The synthesis was used as a model for a "ground-upwards building-block" approach to a primary dendrimer of gallic acid covalently attached to the surface of graphite powder, tris-(O-gallyl)-gallylaminoethylaminocarbonyl graphite (TGGA-carbon). The resulting modified carbon materials were characterized at each stage of the syntheses using X-ray photoelectron spectroscopy (XPS) analysis. The effects of increasing the modifier's structural complexity from monomeric gallic-carbon to the analogous primary dendrimer TGGA-carbon were explored by comparing each material's efficacy toward the adsorption of Al(III) ions from water. The uptake of Al(III) ions by gallic-carbon and TGGA-carbon was measured using UV-vis spectroscopy. In comparison to the case of monomeric gallic-carbon, the rate of adsorption of Al(III) ions by the TGGA-carbon was found to be 2.3 times more rapid. Furthermore, the total uptake of Al(III) ions was greater (reducing the concentration of 1000 ppb Al(III) solutions to below the WHO legal limit of 100 ppb in less than 5 min) and irreversible, in contrast to the gallic-carbon where the adsorption was found to be under thermodynamic control and to follow a Freundlich isotherm.

Metallic nanoparticles deposited on carbon microspheres: novel materials for combinatorial electrochemistry and electroanalysis.

This review deals with the preparation of metallic nanoparticles on glassy carbon microspheres and the use of these new hybrid materials for combinatorial electrochemistry and electroanalysis. First, the preparation of gold, silver and palladium nanoparticles on glassy carbon microspheres by a simple electroless procedure is described. Then, different types of electrodes modified with glassy carbon microspheres are described. These are: (i) glassy carbon electrodes modified by a composite film of glassy carbon microspheres and multi-walled carbon nanotubes, (ii) basal plane pyrolylic graphite electrodes modified by the abrasive attachment of glassy carbon microspheres and (iii) carbon-epoxy composite electrodes loaded with glassy carbon microspheres. The three types of electrode architectures described consist of metallic nanoparticles embedded in a carbon matrix and each of the electrode macrodisc surfaces actually correspond to a random metallic nanoelectrode array. Carbon-epoxy composite electrodes have good characteristics for their use as practical sensors. Furthermore, the use of several kinds of metallic nanoparticles allows the construction of a multi-analyte electrode and the screening of electroactive materials by following a combinatorial approach.