Reversibly Tuning the Viscosity of Peptide-Based Solutions Using Visible Light.

Light can be used to design stimuli-responsive systems. We induce transient changes in the assembly of a low molecular weight gelator solution using a merocyanine photoacid. Through our approach, reversible viscosity changes can be achieved via irradiation, delivering systems where flow can be controlled non-invasively on demand.

How well do concentric radii approximate population exposure to volcanic hazards?

Effective risk management requires accurate assessment of population exposure to volcanic hazards. Assessment of this exposure at the large-scale has often relied on circular footprints of various sizes around a volcano to simplify challenges associated with estimating the directionality and distribution of the intensity of volcanic hazards. However, to date, exposure values obtained from circular footprints have never been compared with modelled hazard footprints. Here, we compare hazard and population exposure estimates calculated from concentric radii of 10, 30 and 100 km with those calculated from the simulation of dome- and column-collapse pyroclastic density currents (PDCs), large clasts, and tephra fall across Volcanic Explosivity Index (VEI) 3, 4 and 5 scenarios for 40 volcanoes in Indonesia and the Philippines. We found that a 10 km radius-considered by previous studies to capture hazard footprints and populations exposed for VEI ≤ 3 eruptions-generally overestimates the extent for most simulated hazards, except for column collapse PDCs. A 30 km radius - considered representative of life-threatening VEI ≤ 4 hazards-overestimates the extent of PDCs and large clasts but underestimates the extent of tephra fall. A 100 km radius encapsulates most simulated life-threatening hazards, although there are exceptions for certain combinations of scenario, source parameters, and volcano. In general, we observed a positive correlation between radii- and model-derived population exposure estimates in southeast Asia for all hazards except dome collapse PDC, which is very dependent upon topography. This study shows, for the first time, how and why concentric radii under- or over-estimate hazard extent and population exposure, providing a benchmark for interpreting radii-derived hazard and exposure estimates. Supplementary information: The online version contains supplementary material available at 10.1007/s00445-023-01686-5.

Next-generation protein-based materials capture and preserve projectiles from supersonic impacts.

Extreme energy-dissipating materials are essential for a range of applications. The military and police force require ballistic armour to ensure the safety of their personnel, while the aerospace industry requires materials that enable the capture, preservation and study of hypervelocity projectiles. However, current industry standards display at least one inherent limitation, such as weight, breathability, stiffness, durability and failure to preserve captured projectiles. To resolve these limitations, we have turned to nature, using proteins that have evolved over millennia to enable effective energy dissipation. Specifically, a recombinant form of the mechanosensitive protein talin was incorporated into a monomeric unit and crosslinked, resulting in a talin shock-absorbing material (TSAM). When subjected to 1.5 km s-1 supersonic shots, TSAMs were shown to absorb the impact and capture and preserve the projectile.

Controlling the structure of supramolecular fibre formation for benzothiazole based hydrogels with antimicrobial activity against methicillin resistant Staphylococcus aureus.

Antimicrobial resistance is one of the greatest threats to human health. Gram-positive methicillin resistant Staphylococcus aureus (MRSA), in both its planktonic and biofilm form, is of particular concern. Herein we identify the hydrogelation properties for a series of intrinsically fluorescent, structurally related supramolecular self-associating amphiphiles and determine their efficacy against both planktonic and biofilm forms of MRSA. To further explore the potential translation of this hydrogel technology for real-world applications, the toxicity of the amphiphiles was determined against the eukaryotic multicellular model organism, Caenorhabditis elegans. Due to the intrinsic fluorescent nature of these supramolecular amphiphiles, material characterisation of their molecular self-associating properties included; comparative optical density plate reader assays, rheometry and widefield fluorescence microscopy. This enabled determination of amphiphile structure and hydrogel sol dependence on resultant fibre formation.

Advancements in antimicrobial nanoscale materials and self-assembling systems.

Antimicrobial resistance is directly responsible for more deaths per year than either HIV/AIDS or malaria and is predicted to incur a cumulative societal financial burden of at least $100 trillion between 2014 and 2050. Already heralded as one of the greatest threats to human health, the onset of the coronavirus pandemic has accelerated the prevalence of antimicrobial resistant bacterial infections due to factors including increased global antibiotic/antimicrobial use. Thus an urgent need for novel therapeutics to combat what some have termed the 'silent pandemic' is evident. This review acts as a repository of research and an overview of the novel therapeutic strategies being developed to overcome antimicrobial resistance, with a focus on self-assembling systems and nanoscale materials. The fundamental mechanisms of action, as well as the key advantages and disadvantages of each system are discussed, and attention is drawn to key examples within each field. As a result, this review provides a guide to the further design and development of antimicrobial systems, and outlines the interdisciplinary techniques required to translate this fundamental research towards the clinic.

TCF-ALP: a fluorescent probe for the selective detection of Staphylococcus bacteria and application in "smart" wound dressings.

Alkaline phosphatase (ALP) is an important enzyme-based biomarker present in several bacterial species; however, it is currently undervalued as a strategy to detect pathogenic bacteria. Here, we explore our ALP-responsive colorimetric and fluorescent probe (TCF-ALP) for such applications. TCF-ALP displayed a colorimetric and fluorescence response towards Staphylococcus aureus (S. aureus), with a limit of detection of 3.7 × 106 CFU mL-1 after 24 h incubation. To our surprise, TCF-ALP proved selective towards Staphylococcus bacteria when compared with Enterococcus faecalis (E. faecalis), and Gram-negative P. aeruginosa and E. coli. Selectivity was also seen in clinically relevant S. aureus biofilms. Owing to the high prevalence and surface location of S. aureus in chronic wounds, TCF-ALP was subsequently encapsulated in polyvinyl alcohol (PVA)-based hydrogels as a proof-of-concept "smart" wound dressing. TCF-ALP hydrogels were capable of detecting S. aureus in planktonic and biofilm assays, and displayed a clear colour change from yellow to purple after 24 h incubation using ex vivo porcine skin models. Overall, TCF-ALP is a simple tool that requires no prior knowledge, training, or specialist equipment, and has the potential to overcome issues related to invasive swabbing and tissue biopsy methods. Thus, TCF-ALP could be used as a tool to monitor the early development of infection in a wound and allow for the rapid provision of appropriate treatment for Staphylococcal bacterial infections.

Molecular Boronic Acid-Based Saccharide Sensors.

Boronic acids can reversibly bind diols, a molecular feature that is ubiquitous within saccharides, leading to their use in the design and implementation of sensors for numerous saccharide species. There is a growing understanding of the importance of saccharides in many biological processes and systems; while saccharide or carbohydrate sensing in medicine is most often associated with detection of glucose in diabetes patients, saccharides have proven to be relevant in a range of disease states. Herein the relevance of carbohydrate sensing for biomedical applications is explored, and this review seeks to outline how the complexity of saccharides presents a challenge for the development of selective sensors and describes efforts that have been made to understand the underpinning fluorescence and binding mechanisms of these systems, before outlining examples of how researchers have used this knowledge to develop ever more selective receptors.

A small-molecular inhibitor against Proteus mirabilis urease to treat catheter-associated urinary tract infections.

Infection and blockage of indwelling urinary catheters is significant owing to its high incidence rate and severe medical consequences. Bacterial enzymes are employed as targets for small molecular intervention in human bacterial infections. Urease is a metalloenzyme known to play a crucial role in the pathogenesis and virulence of catheter-associated Proteus mirabilis infection. Targeting urease as a therapeutic candidate facilitates the disarming of bacterial virulence without affecting bacterial fitness, thereby limiting the selective pressure placed on the invading population and lowering the rate at which it will acquire resistance. We describe the design, synthesis, and in vitro evaluation of the small molecular enzyme inhibitor 2-mercaptoacetamide (2-MA), which can prevent encrustation and blockage of urinary catheters in a physiologically representative in vitro model of the catheterized urinary tract. 2-MA is a structural analogue of urea, showing promising competitive activity against urease. In silico docking experiments demonstrated 2-MA's competitive inhibition, whilst further quantum level modelling suggests two possible binding mechanisms.

Advances in applied supramolecular technologies.

Supramolecular chemistry is a comparatively young field that to date has mainly been focused on building a foundation of fundamental understanding. With much progress in this area, researchers are seeking to apply this knowledge to the development of commercially viable products. In this review we seek to outline historical and recent developments within the field of supramolecular chemistry that have made the transition from laboratory to market, and to bring to light those technologies that we believe have commercial potential. In doing so we hope we may illuminate pathways to market for research currently being conducted.

Supramolecular self-associating amphiphiles (SSAs) as nanoscale enhancers of cisplatin anticancer activity.

Many chemotherapeutic drugs have a narrow therapeutic window due to inefficient tumour cell permeation. Supramolecular self-associating amphiphilic salts (SSAs) are a unique class of small molecules that offer potential as next generation cancer drugs and/or therapeutic enhancement agents. Herein, we demonstrate the cytotoxicity of seven SSAs towards both ovarian and glioblastoma cancer cells. We also utilize the intrinsic fluorescent properties of one of these lead SSAs to provide evidence for this class of compound to both bind to the exterior cancer cell surface and permeate the cell membrane, to become internalized. Furthermore, we demonstrate synergistic effects of two lead SSAs on cisplatin-mediated cytotoxicity of ovarian cancer cells and show that this correlates with increased DNA damage and apoptosis versus either agent alone. This work provides the first evidence that SSAs interact with and permeate cancer cell membranes and enhance the cytotoxic activity of a chemotherapeutic drug in human cancer cells.

Towards the Prediction of Antimicrobial Efficacy for Hydrogen Bonded, Self-Associating Amphiphiles.

Herein we report 50 structurally related supramolecular self-associating amphiphilic (SSA) salts and related compounds. These SSAs are shown to act as antimicrobial agents, active against model Gram-positive (methicillin-resistant Staphylococcus aureus) and/or Gram-negative (Escherichia coli) bacteria of clinical interest. Through a combination of solution-state, gas-phase, solid-state and in silico measurements, we determine 14 different physicochemical parameters for each of these 50 structurally related compounds. These parameter sets are then used to identify molecular structure-physicochemical property-antimicrobial activity relationships for our model Gram-negative and Gram-positive bacteria, while simultaneously providing insight towards the elucidation of SSA mode of antimicrobial action.

Protein Encapsulation: A Nanocarrier Approach to the Fluorescence Imaging of an Enzyme-Based Biomarker.

Here, we report a new pentafluoropropanamido rhodamine fluorescent probe (ACS-HNE) that allows for the selective detection of neutrophil elastase (NE). ACS-HNE displayed high sensitivity, with a low limit of detection (<5.3 nM), and excellent selectivity toward elastase over other relevant biological analytes and enzymes. The comparatively poor solubility and cell permeability of neat ACS-HNE was improved by creating an ACS-HNE-albumin complex; this approach allowed for improvements in the in situ visualization of elastase activity in RAW 264.7 cells relative to ACS-HNE alone. The present study thus serves to demonstrate a simple universal strategy that may be used to overcome cell impermeability and solubility limitations, and to prepare probes suitable for the cellular imaging of enzymatic activity in vitro.

Controllable hydrogen bonded self-association for the formation of multifunctional antimicrobial materials.

SSAs are a class of supramolecular self-associating amphiphilic salt, the anionic component of which contains a covalently bound hydrogen bond donor-acceptor motif. This results in a monomeric unit which can adopt multiple hydrogen bonding modes simultaneously. Previous investigations have shown examples of SSAs to act as antimicrobial agents against clinically relevant methicillin-resistant Staphylococcus aureus (MRSA). Herein, we report an intrinsically fluorescent SSA which can self-associate producing dimers, spherical aggregates and hydrogels dependent on solvent environment, while retaining antimicrobial activity against both model Gram-positive (MRSA) and Gram-negative (Escherichia coli) bacteria. Finally, we demonstrate the SSA supramolecular hydrogel to tolerate the inclusion of the antibiotic ampicillin, leading to the enhanced inhibition of growth with both model bacteria, and derive initial molecular structure-physicochemical property-antimicrobial activity relationships.

Boronate ester cross-linked PVA hydrogels for the capture and H2O2-mediated release of active fluorophores.

A new set of PVA hydrogels were formed using the boronate ester fluorescent probe PF1 and the novel boronate fluorescent probe PT1 as the covalent crosslinkers. Treatment with aqueous H2O2 allowed triggered release of the fluorescent dye accompanied by complete dissolution of the hydrogel.

A Colorimetric Chemosensor Based on a Nozoe Azulene That Detects Fluoride in Aqueous/Alcoholic Media.

Colorimetry is an advantageous method for detecting fluoride in drinking water in a resource-limited context, e. g., in parts of the developing world where excess fluoride intake leads to harmful health effects. Here we report a selective colorimetric chemosensor for fluoride that employs an azulene as the reporter motif and a pinacolborane as the receptor motif. The chemosensor, NAz-6-Bpin, is prepared using the Nozoe azulene synthesis, which allows for its rapid and low-cost synthesis. The chemosensor gives a visually observable response to fluoride both in pure organic solvent and also in water/alcohol binary solvent mixtures.

Enhanced Colorimetric Differentiation between Staphylococcus aureus and Pseudomonas aeruginosa Using a Shape-Encoded Sensor Hydrogel.

Herein, we demonstrate a combined fluorescent probe/shape-encoded hydrogel strategy for the fast, sensitive, and selective detection of bacterial species via their characteristic enzymes. A poly(vinyl alcohol) (PVA) hydrogel loaded with the fluorescent probe N,N'-(3-oxo-3H-spiro[isobenzofuran-1,9'-xanthene]-3',6'-diyl)bis(2,2,3,3,3-pentafluoropropanamide) (ACS-HNE) was designed for the detection of elastase, an enzyme produced by Pseudomonas aeruginosa. Likewise, a chitosan-derived hydrogel was loaded with the fluorescent probe 4-methylumbelliferyl-α-d-glucopyranoside (MUD) by entrapment for the selective detection of α-glucosidase, an enzyme produced by Staphylococcus aureus. For an observation time of 60 min, limits of detection (LODs) of ≤20 nM for elastase and ≤30 pM for α-glucosidase were obtained, which in the latter case is 3 orders of magnitude better than related chitosan systems with covalently coupled substrate. To illustrate the potential utility of these highly sensitive sensor hydrogels as a simple point-of-care test system, shaped hydrogel slabs representing the letters P and S were manufactured to detect P. aeruginosa and S. aureus, respectively. These shapes were shown to provide an additional unique color code under UV illumination corresponding to the characteristic enzyme produced by the corresponding bacteria. This study shows potential for the future development of an effective and simple point-of-care test for the rapid identification of bacterial species that can be operated by nonspecialists.

Reaction-based indicator displacement assay (RIA) for the development of a triggered release system capable of biofilm inhibition.

Here, a reaction-based indicator displacement hydrogel assay (RIA) was developed for the detection of hydrogen peroxide (H2O2) via the oxidative release of the optical reporter Alizarin Red S (ARS). In the presence of H2O2, the RIA system displayed potent biofilm inhibition for Methicillin-resistant Staphylococcus aureus (MRSA), as shown through an in vitro assay quantifying antimicrobial efficacy. This work demonstrated the potential of H2O2-responsive hydrogels containing a covalently bound diol-based drug for controlled drug release.

Long Wavelength TCF-Based Fluorescent Probe for the Detection of Alkaline Phosphatase in Live Cells.

A long wavelength TCF-based fluorescent probe (TCF-ALP) was developed for the detection of alkaline phosphatase (ALP). ALP-mediated hydrolysis of the phosphate group of TCF-ALP resulted in a significant fluorescence "turn on" (58-fold), which was accompanied by a colorimetric response from yellow to purple. TCF-ALP was cell-permeable, which allowed it to be used to image ALP in HeLa cells. Upon addition of bone morphogenic protein 2, TCF-ALP proved capable of imaging endogenously stimulated ALP in myogenic murine C2C12 cells. Overall, TCF-ALP offers promise as an effective fluorescent/colorimetric probe for evaluating phosphatase activity in clinical assays or live cell systems.

An ESIPT Probe for the Ratiometric Imaging of Peroxynitrite Facilitated by Binding to Aß-Aggregates.

A series of 3-hydroxyflavone (3-HF) ESIPT (excited-state intramolecular proton transfer) boronate-based fluorescent probes have been developed for the detection of peroxynitrite (ONOO-). The dyes are environmentally sensitive, and each probe exhibited a ratiometric response toward ONOO- in a micellar environment. The probes were used to image different aggregation states of amyloid-ß (Aß) in the presence of ONOO-. The 3-HF-OMe probe was found to produce a ratiometric response toward ONOO- when bound to Aß aggregates, resulting in a novel host-guest ensemble, which adds insight into the development of other ESIPT-based probes for the simultaneous sensing of fibrous proteins/peptides and environmental ROS/RNS.

Dye Displacement Assay for Saccharides using Benzoxaborole Hydrogels.

Dye displacement assays are a simple but effective method to determine the concentration of target analytes. Previously, we have shown that phenylboronic acid pinacol ester hydrogels (borogels) can be used to develop a boronic acid-Alizarin red S dye displacement assay for the determination of fructose (orange to red). In this work, benzoxaborole hydrogels (BOBgels) were developed, and these BOBgels demonstrated an enhanced apparent binding affinity towards monosaccharides, in particular towards glucose.