Premise Plumbing Pipe Materials and In-Building Disinfectants Shape the Potential for Proliferation of Pathogens and Antibiotic Resistance Genes.

In-building disinfectants are commonly applied to control the growth of pathogens in plumbing, particularly in facilities such as hospitals that house vulnerable populations. However, their application has not been well optimized, especially with respect to interactive effects with pipe materials and potential unintended effects, such as enrichment of antibiotic resistance genes (ARGs) across the microbial community. Here, we used triplicate convectively mixed pipe reactors consisting of three pipe materials (PVC, copper, and iron) for replicated simulation of the distal reaches of premise plumbing and evaluated the effects of incrementally increased doses of chlorine, chloramine, chlorine dioxide, and copper-silver disinfectants. We used shotgun metagenomic sequencing to characterize the resulting succession of the corresponding microbiomes over the course of 37 weeks. We found that both disinfectants and pipe material affected ARG and microbial community taxonomic composition both independently and interactively. Water quality and total bacterial numbers were not found to be predictive of pathogenic species markers. One result of particular concern was the tendency of disinfectants, especially monochloramine, to enrich ARGs. Metagenome assembly indicated that many ARGs were enriched specifically among the pathogenic species. Functional gene analysis was indicative of a response of the microbes to oxidative stress, which is known to co/cross-select for antibiotic resistance. These findings emphasize the need for a holistic evaluation of pathogen control strategies for plumbing.

Influence of pipe materials on in-building disinfection of P. aeruginosa and A. baumannii in simulated hot water plumbing.

A framework is needed to account for interactive effects of plumbing materials and disinfectants on opportunistic pathogens (OPs) in building water systems. Here we evaluated free chlorine, monochloramine, chlorine dioxide, and copper-silver ionization (CSI) for controlling Pseudomonas aeruginosa and Acinetobacter baumannii as two representative OPs that colonize hot water plumbing, in tests using polyvinylchloride (PVC), copper-PVC, and iron-PVC convectively-mixed pipe reactors (CMPRs). Pipe materials vulnerable to corrosion (i.e., iron and copper) altered the pH, dissolved oxygen, and disinfectant levels in a manner that influenced growth trends of the two OPs and total bacteria. P. aeruginosa grew well in PVC CMPRs, poorly in iron-PVC CMPRs, and was best controlled by CSI disinfection, whereas A. baumannii showed the opposite trend for pipe material and was better controlled by chlorine and chlorine dioxide. Various scenarios were identified in which pipe material and disinfectant can interact to either hinder or accelerate growth of OPs, illustrating the difficulties of controlling OPs in portions of plumbing systems experiencing warm, stagnant water.

Antimicrobial mechanism of cuprous oxide (Cu2O) coatings.

Some very effective antimicrobial coatings exploit copper or cuprous oxide (Cu2O) as the active agent. The aim of this study is to determine which species is the active antimicrobial - dissolved ions, the Cu2O solid, or reactive oxygen species. Copper ions were leached from Cu2O into various solutions and the leachate tested for both dissolved copper and the efficacy in killing Pseudomonas aeruginosa. The concentration of copper species leached from Cu2O into aqueous solution varied greatly with the composition of the aqueous solution. For a range of solution buffers, killing of P. aeruginosa was highly correlated with the concentration of copper in the leachate. Further, 10 µL bacterial suspension droplets were placed on Cu2O coatings, with or without a polymer barrier layer, and tested for bacterial kill. Killing occurred without contact between bacterium and solid, demonstrating that contact with Cu2O is not necessary. We therefore conclude that soluble copper species are the antimicrobial agent, and that the most potent species is Cu+. The solid quickly raises and sustains the concentration of soluble copper species near the bacterium. Killing via soluble copper ions rather than contact should allow copper coatings to kill bacteria even when fouled, which is an important practical consideration.

Facile Implementation of Antimicrobial Coatings through Adhesive Films (Wraps) Demonstrated with Cuprous Oxide Coatings.

Antimicrobial coatings have a finite lifetime because of wear, depletion of the active ingredient, or surface contamination that produces a barrier between the pathogen and the active ingredient. The limited lifetime means that facile replacement is important. Here, we describe a generic method for rapidly applying and reapplying antimicrobial coatings to common-touch surfaces. The method is to deposit an antimicrobial coating on a generic adhesive film (wrap), and then to attach that modified wrap to the common-touch surface. In this scenario, the adhesion of the wrap and antimicrobial efficacy are separated and can be optimized independently. We demonstrate the fabrication of two antimicrobial wraps, both using cuprous oxide (Cu2O) as the active ingredient. The first uses polyurethane (PU) as the polymeric binder and the second uses polydopamine (PDA). Our antimicrobial PU/Cu2O and PDA/Cu2O wraps, respectively, kill >99.98% and >99.82% of the human pathogen, P. aeruginosa, in only 10 min, and each of them kill >99.99% of the bacterium in 20 min. These antimicrobial wraps can be removed and replaced on the same object in <1 min with no tools. Wraps are already frequently used by consumers to coat drawers or cars for aesthetic or protective purposes.

Porous Antimicrobial Coatings for Killing Microbes within Minutes.

Antimicrobial coatings can be used to reduce the transmission of infectious agents that are spread by contact. An effective coating should kill microbes in the time between users, which is sometimes minutes or less. Fast killing requires fast transport, and our proposed method of fast transport is a porous coating where the contaminated liquid imbibes (infiltrates) into the pores to achieve rapid contact with active material inside the pores. We test the hypothesis that a porous antimicrobial coating will enable faster inactivation of microorganisms than a planar coating of the same material. We use hydrophilic pores with dimensions of 5-100 µm such that liquid droplets imbibe in seconds, and from there transport distances and times are short, defined by the pore size rather than the droplet size. Our coating has two levels of structure: (A) a porous scaffold and (B) an antimicrobial coating within the pore structure containing the active ingredient. Two scaffolds are studied: stainless steel and poly(methyl methacrylate) (PMMA). The active ingredient is electrolessly deposited copper. To enhance adhesion and growth of copper, a layer of polydopamine (PDA) is deposited on the scaffold prior to deposition of the copper. This porous copper coating kills 99.84% of Pseudomonas aeruginosa within 3 min, which is equivalent to a half-life of 27 s. In contrast, the same layer of PDA/copper on a nonporous coating kills 79.65% in the same time frame, consistent with the hypothesis that the killing rate is increased by the addition of porosity. Using the porous PMMA scaffold, the porous antimicrobial coating kills >99.99% P. aeruginosa in 5 min, which is equivalent to a half-life of 21 s. The higher rate of kill on the porous antimicrobial solid is appropriate for hindering the spread of infectious agents on common-use objects.

Robust and Transparent Silver Oxide Coating Fabricated at Room Temperature Kills Clostridioides difficile Spores, MRSA, and Pseudomonas aeruginosa.

Antimicrobial coatings can inhibit the transmission of infectious diseases when they provide a quick kill that is achieved long after the coating application. Here, we describe the fabrication and testing of a glass coating containing Ag2O microparticles that was prepared from sodium silicate at room temperature. The half-lives of both methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa on this coating are only 2-4 min. The half-life of Clostridioides difficile spores is about 9-12 min, which is extremely short for a spore. Additional tests on MRSA demonstrate that the coating retains its antimicrobial activity after abrasion and that an increased loading of Ag2O leads to a shorter half-life. This coating combines the properties of optical transparency, robustness, fast kill, and room temperature preparation that are highly desirable for an antimicrobial coating.

Desiccation-Tolerance of Mycobacterium avium, Mycobacterium intracellulare, Mycobacterium chimaera, Mycobacterium abscessus and Mycobacterium chelonae.

Desiccation-tolerance of cells of four strains of Mycobacterium chimaera and individual strains of Mycobacterium avium, Mycobacterium intracellulare, Mycobacterium abscessus, and Mycobacterium chelonae were measured by two methods. The survival of water-acclimated cells both in filter paper and on the surface of stainless-steel coupons were measured. In filter paper at 40% relative humidity at 25 °C, survival of patient isolates of M. avium and M. chimaera cells was 28% and 34% after 21 days of incubation, whereas it was 100% for the Sorin 3T isolate of M. chimaera. On stainless-steel biofilms after 42 days of incubation at 40% relative humidity at 25 °C, survival of water-acclimated cells of M. intracellulare was above 100%, while M. chelonae cells did not survive beyond 21 days, and survival of water-acclimated cells of M. avium and M. abscessus was 18% and 14%, respectively. On stainless-steel coupons, survival of patient and Sorin 3T isolates of M. chimaera was quite similar, specifically between 14% and 28% survival, after 42 days of incubation at 40% relative humidity at 25 °C. The experiments would support the hypothesis that some nontuberculous mycobacterial species are relatively desiccation-tolerant, whereas others are not. Further, long-term survival of the two M. chimaera strains is consistent with the presence of that species in Sorin 3T heater-coolers shipped throughout the world.

Transparent Anti-SARS-CoV-2 and Antibacterial Silver Oxide Coatings.

Transparent antimicrobial coatings can maintain the aesthetic appeal of surfaces and the functionality of a touch-screen while adding the benefit of reducing disease transmission. We fabricated an antimicrobial coating of silver oxide particles in a silicate matrix on glass. The matrix was grown by a modified Stöber sol-gel process with vapor-phase water and ammonia. A coating on glass with 2.4 mg of Ag2O per mm2 caused a reduction of 99.3% of SARS-CoV-2 and >99.5% of Pseudomonas aeruginosa, Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus compared to the uncoated glass after 1 h. We envisage that screen protectors with transparent antimicrobial coatings will find particular application to communal touch-screens, such as in supermarkets and other check-out or check-in facilities where a number of individuals utilize the same touch-screen in a short interval.

Transparent and Sprayable Surface Coatings that Kill Drug-Resistant Bacteria Within Minutes and Inactivate SARS-CoV-2 Virus.

Antimicrobial coatings are one method to reduce the spread of microbial diseases. Transparent coatings preserve the visual properties of surfaces and are strictly necessary for applications such as antimicrobial cell phone screens. This work describes transparent coatings that inactivate microbes within minutes. The coatings are based on a polydopamine (PDA) adhesive, which has the useful property that the monomer can be sprayed, and then the monomer polymerizes in a conformal film at room temperature. Two coatings are described (1) a coating where PDA is deposited first and then a thin layer of copper is grown on the PDA by electroless deposition (PDA/Cu) and (2) a coating where a suspension of Cu2O particles in a PDA solution is deposited in a single step (PDA/Cu2O). In the second coating, PDA menisci bind Cu2O particles to the solid surface. Both coatings are transparent and are highly efficient in inactivating microbes. PDA/Cu kills >99.99% of Pseudomonas aeruginosa and 99.18% of methicillin-resistant Staphylococcus aureus (MRSA) in only 10 min and inactivates 99.98% of SARS-CoV-2 virus in 1 h. PDA/Cu2O kills 99.94% of P. aeruginosa and 96.82% of MRSA within 10 min and inactivates 99.88% of SARS-CoV-2 in 1 h.

Growth Temperature, Trehalose, and Susceptibility to Heat in Mycobacterium avium.

Mycobacterium avium is capable of an adaptive, reversible response to high-temperature survival depending on its growth temperature. Trehalose concentrations of M. avium cells grown at 42 °C were significantly higher compared to those of cells grown at 25 °C. Further, the survival of cells of M. avium grown at 42 °C and exposed to 65 °C were significantly higher than the survival of cells grown at 25 °C. This adaptive response to growth temperature may play a role in the persistence of M. avium in premise plumbing.

Physical Measures to Reduce Exposure to Tap Water-Associated Nontuberculous Mycobacteria.

Nontuberculous mycobacteria (NTM) that cause human disease can be isolated from household tap water. Easy-to-use physical methods to reduce NTM from this potential source of exposure are needed. Filters and UV disinfection have been evaluated for their ability to reduce numbers of waterborne non-NTM organisms from drinking water, but their efficacy in reducing NTM counts are not well-established. Thus, five commercially available disinfection methods were evaluated for their potential as practical, efficient, and low-cost methods to reduce NTM from tap water. First, suspensions of tap water-adapted Mycobacterium smegmatis were passed through either a point-of-use, disposable, 7-day or 14-day Pall-Aquasafe filter. The 7-day filter prevented passage of M. smegmatis in effluent water for 13 days, and the 14-day filter prevented the passage of M. smegmatis for 25 days. Second, a granular activated carbon filter system failed to significantly reduce Mycobacterium abscessus and Mycobacterium avium numbers. Third, suspensions of tap water-adapted M. abscessus, M. avium, and M. chimaera ("MycoCocktail") were passed through the "LifeStraw GO" hollow-fiber, two-stage membrane filtration system. LifeStraw GO prevented passage of the MycoCocktail suspension for the entire 68-day evaluation period. Finally, two different water bottle UV sterilization systems, "Mountop" and "SteriPEN," were evaluated for their capacity to reduce NTM numbers from tap water. Specifically, MycoCocktail suspensions were dispensed into Mountop and SteriPEN water bottles and UV treated as per the manufacturer instructions once daily for 7 days, followed by a once weekly treatment for up to 56 days. After 4 days of daily UV treatment, both systems achieved a >4 log reduction in MycoCocktail CFU. After the 56-day evaluation period, suspension and biofilm-associated CFU were measured, and a >4 log reduction in CFU was maintained in both systems. Taken together, physical disinfection methods significantly reduced NTM numbers from tap water and may be easy-to-use, accessible applications to reduce environmental NTM exposures from drinking water.

Mycobacterium avium in Community and Household Water, Suburban Philadelphia, Pennsylvania, USA, 2010-2012.

Attention to environmental sources of Mycobacterium avium complex (MAC) infection is a vital component of disease prevention and control. We investigated MAC colonization of household plumbing in suburban Philadelphia, Pennsylvania, USA. We used variable-number tandem-repeat genotyping and whole-genome sequencing with core genome single-nucleotide variant analysis to compare M. avium from household plumbing biofilms with M. avium isolates from patient respiratory specimens. M. avium was recovered from 30 (81.1%) of 37 households, including 19 (90.5%) of 21 M. avium patient households. For 11 (52.4%) of 21 patients with M. avium disease, isolates recovered from their respiratory and household samples were of the same genotype. Within the same community, 18 (85.7%) of 21 M. avium respiratory isolates genotypically matched household plumbing isolates. Six predominant genotypes were recovered across multiple households and respiratory specimens. M. avium colonizing municipal water and household plumbing may be a substantial source of MAC pulmonary infection.

Effect of Cetylpyridinium Chloride (CPC) on Colony Formation of Common Nontuberculous Mycobacteria.

Cetylpyridinium chloride (CPC) is widely used to decontaminate water samples for the cultivation of nontuberculous mycobacteria (NTM). The rationale for using CPC is that it kills more non mycobacteria than NTM and thereby prevents the outgrowth and detection of mycobacterial colonies on solid media. The few CPC-susceptibility measurements that have been published, suggest that CPC-decontamination does kill significant numbers of NTM. We confirm that observation here and further demonstrate that CPC-susceptibility varied significantly by one log between representative NTM species and between strains of the same species. CPC-susceptibility was the same for cells collected from cultures or water-acclimated (P = 0.6485, T-test) and CPC-susceptibility was relatively similar over the range of commonly employed CPC dosages. We conclude that use of CPC as decontaminating agent may lead to failure to recover an NTM isolate and considerable underestimates of NTM numbers.

Correction: Environmental Nontuberculous Mycobacteria in the Hawaiian Islands.

[This corrects the article DOI: 10.1371/journal.pntd.0005068.].

Environmental Nontuberculous Mycobacteria in the Hawaiian Islands.

Lung disease caused by nontuberculous mycobacteria (NTM) is an emerging infectious disease of global significance. Epidemiologic studies have shown the Hawaiian Islands have the highest prevalence of NTM lung infections in the United States. However, potential environmental reservoirs and species diversity have not been characterized. In this cross-sectional study, we describe molecular and phylogenetic comparisons of NTM isolated from 172 household plumbing biofilms and soil samples from 62 non-patient households and 15 respiratory specimens. Although non-uniform geographic sampling and availability of patient information were limitations, Mycobacterium chimaera was found to be the dominant species in both environmental and respiratory specimens. In contrast to previous studies from the continental U.S., no Mycobacterium avium was identified. Mycobacterium intracellulare was found only in respiratory specimens and a soil sample. We conclude that Hawai'i's household water sources contain a unique composition of Mycobacterium avium complex (MAC), increasing our appreciation of NTM organisms of pulmonary importance in tropical environments.

Methylobacterium spp. as an indicator for the presence or absence of Mycobacterium spp.

OBJECTIVE/BACKGROUND: A published survey of bacteria in showerhead biofilm samples revealed that Methylobacterium spp. and Mycobacterium spp. seldom coexisted in biofilms. METHODS: To confirm that information, biofilm samples were collected from household plumbing of Mycobacterium avium patients and Methylobacterium spp. and M. avium numbers were measured by direct colony counts. RESULTS: The results demonstrated that if Methylobacterium spp. were present, Mycobacterium spp. were absent, and the opposite. CONCLUSION: The data demonstrate that microbial populations in biofilms can influence the presence or absence of opportunistic premise plumbing pathogens and, thereby, increase the range of strategies to reduce exposure to waterborne pathogens. Finally, by assessing for the visual presence of methylobacteria as pink pigmentation on showers and shower curtains, homeowners and managers of hospitals and other buildings can quickly determine whether a premise plumbing biofilm sample has mycobacteria with a high degree of assurance.

Variable-Number Tandem-Repeat Analysis of Respiratory and Household Water Biofilm Isolates of "Mycobacterium avium subsp. hominissuis" with Establishment of a PCR Database.

"Mycobacterium aviumsubsp.hominissuis" is an important cause of pulmonary disease. It is acquired from environmental sources, but there is no methodology for large population studies. We evaluated the potential of variable-number tandem-repeat (VNTR) analysis. Clinical and household biofilmM. aviumisolates underwent molecular identification. Testing for IS901was done to separateM. aviumsubsp.aviumfromM. aviumsubsp.hominissuis VNTR types were defined using VNTR loci, and subtyping was performed using 3'hsp65and internal transcribed spacer (ITS) sequencing. Forty-nine VNTR types and eight subtypes ofM. aviumsubsp.hominissuis(IS901negative) were identified among 416 isolates ofM. aviumfrom 121 patients and 80 biofilm sites. Of those types, 67% were found only among patient isolates, 11% only among household water isolates, and 23% among both. Of 13 VNTR types that included ≥4 patients, the majority (61.5%) represented geographic clustering (same city). Most VNTR types with multiple patients belonged to the same 3'hsp65sequence code (sequevar). A total of 44 isolates belonging to fourM. aviumsubsp.hominissuisVNTR types (8%), including three with the rare Mav-F ITS sequence and 0/8 subspecies, produced amplicons with IS901PCR primers. By sequencing, all 44 amplicons were not IS901but ISMav6, which was recently observed in Japan but had not been previously described among U.S. isolates. VNTR analysis ofM. aviumsubsp.hominissuisisolates is easier and faster than pulsed-field gel electrophoresis. Seven VNTR loci separated 417 isolates into 49 types. No isolates ofM. aviumsubsp.aviumwere identified. The distributions of the VNTR copy numbers, the allelic diversity, and the low prevalence of ISMav6 differed from the findings for respiratory isolates reported from Japan.

Absence of Mycobacterium intracellulare and presence of Mycobacterium chimaera in household water and biofilm samples of patients in the United States with Mycobacterium avium complex respiratory disease.

Recent studies have shown that respiratory isolates from pulmonary disease patients and household water/biofilm isolates of Mycobacterium avium could be matched by DNA fingerprinting. To determine if this is true for Mycobacterium intracellulare, household water sources for 36 patients with Mycobacterium avium complex (MAC) lung disease were evaluated. MAC household water isolates from three published studies that included 37 additional MAC respiratory disease patients were also evaluated. Species identification was done initially using nonsequencing methods with confirmation by internal transcribed spacer (ITS) and/or partial 16S rRNA gene sequencing. M. intracellulare was identified by nonsequencing methods in 54 respiratory cultures and 41 household water/biofilm samples. By ITS sequencing, 49 (90.7%) respiratory isolates were M. intracellulare and 4 (7.4%) were Mycobacterium chimaera. In contrast, 30 (73%) household water samples were M. chimaera, 8 (20%) were other MAC X species (i.e., isolates positive with a MAC probe but negative with species-specific M. avium and M. intracellulare probes), and 3 (7%) were M. avium; none were M. intracellulare. In comparison, M. avium was recovered from 141 water/biofilm samples. These results indicate that M. intracellulare lung disease in the United States is acquired from environmental sources other than household water. Nonsequencing methods for identification of nontuberculous mycobacteria (including those of the MAC) might fail to distinguish closely related species (such as M. intracellulare and M. chimaera). This is the first report of M. chimaera recovery from household water. The study underscores the importance of taxonomy and distinguishing the many species and subspecies of the MAC.

Mycobacterial interspersed repetitive-unit-variable-number tandem-repeat (MIRU-VNTR) genotyping of mycobacterium intracellulare for strain comparison with establishment of a PCR-based database.

Strain comparison is important to population genetics and to evaluate relapses in patients with Mycobacterium avium complex (MAC) lung disease, but the "gold standard" of pulsed-field gel electrophoresis (PFGE) is time-consuming and complex. We used variable-number tandem repeats (VNTR) for fingerprinting of respiratory isolates of M. intracellulare from patients with underlying bronchiectasis, to establish a nonsequence-based database for population analysis. Different genotypes identified by PFGE underwent species identification using a 16S rRNA gene multiplex PCR. Genotypes of M. intracellulare were confirmed by internal transcribed spacer 1 (ITS1) sequencing and characterized using seven VNTR primers. The pattern of VNTR amplicon sizes and repeat number defined each specific VNTR type. Forty-two VNTR types were identified among 84 genotypes. PFGE revealed most isolates with the same VNTR type to be clonal or exhibit similar grouping of bands. Repetitive sequence-based PCR (rep-PCR) showed minimal pattern diversity between VNTR types compared to PFGE. Fingerprinting of relapse isolates from 31 treated patients using VNTR combined with 16S multiplex PCR unambiguously and reliably distinguished different genotypes from the same patient, with results comparable to those of PFGE. VNTR for strain comparison is easier and faster than PFGE, is as accurate as PFGE, and does not require sequencing. Starting with a collection of 167 M. intracellulare isolates, VNTR distinguished M. intracellulare into 42 clonal groups. Comparison of isolates from different geographic areas, habitats, and clinical settings is now possible.

Remote physiological monitoring: clinical, financial, and behavioral outcomes in a heart failure population.

This article reports on the outcomes associated with remote physiological monitoring (RPM) conducted as part of a heart failure disease management program. Claims data, medical records, data transmission records, and survey results for 91 individuals ages 50-92 (mean 74 years) successfully completing a heart failure RPM program were analyzed for time periods before, during, and after the monitoring intervention. The program was associated with significant reductions in per member per month costs and emergency room and hospital utilization. More detailed analyses were performed for specific gender and age subgroups. Participant surveys indicated high levels of satisfaction, and improvements in self-perceived health status, self-efficacy, and self-management behaviors. This study is the first to assess the impact of a RPM program following removal of the monitoring equipment. The results indicate that RPM, as a component of a traditional disease management program, has a sustained, beneficial effect on participants' lifestyles after the monitoring period has ended.