RESUMO
Photocatalytic advanced oxidation processes (AOPs) promise a chemical-free route to energy-efficient degradation of waterborne micropollutants if long-standing mass transfer and light management issues can be overcome. Herein, we developed a dual-porous photocatalytic system consisting of a mesoporous (i.e., 2-50 nm pores) TiO2 (P25) photocatalyst supported on macroporous (i.e., >50 nm pores) fused quartz fibers (P25/QF). Our reusable photocatalytic AOP reduces chemical consumption and exhibits excellent energy efficiency, demonstrated by degrading various pharmaceutical compounds (acetaminophen, sulfamethoxazole, and carbamazepine) in natural waters with electrical energy per order (EEO) values of 4.07, 0.96, and 1.35 kWh/m3, respectively. Compared to the conventional H2O2/UVC AOP, our photocatalytic AOP can treat water without chemical additives while reducing energy consumption by over 2800%. We examine these improvements based on mass transport and optical (UVA and UVC) transmittance and demonstrate that the enhancements scale with increasing flow rate.
RESUMO
Above-equilibrium "hot"-carrier generation in metals is a promising route to convert photons into electrical charge for efficient near-infrared optoelectronics. However, metals that offer both hot-carrier generation in the near-infrared and sufficient carrier lifetimes remain elusive. Alloys can offer emergent properties and new design strategies compared to pure metals. Here, it is shown that a noble-transition alloy, Aux Pd1- x , outperforms its constituent metals concerning generation and lifetime of hot carriers when excited in the near-infrared. At optical fiber wavelengths (e.g., 1550 nm), Au50 Pd50 provides a 20-fold increase in the number of ≈0.8 eV hot holes, compared to Au, and a threefold increase in the carrier lifetime, compared to Pd. The discovery that noble-transition alloys can excel at hot-carrier generation reveals a new material platform for near-infrared optoelectronic devices.
RESUMO
Devices driven by above-equilibrium "hot" electrons are appealing for photocatalytic technologies, such as in situ H2O2 synthesis, but currently suffer from low (<1%) overall quantum efficiencies. Gold nanostructures excited by visible light generate hot electrons that can inject into a neighboring semiconductor to drive electrochemical reactions. Here, we designed and studied a metal-insulator-metal (MIM) structure of Au nanoparticles on a ZnO/TiO2/Al film stack, deposited through room-temperature, lithography-free methods. Light absorption, electron injection efficiency, and photocatalytic yield in this device are superior in comparison to the same stack without Al. Our device absorbs >60% of light at the Au localized surface plasmon resonance (LSPR) peak near 530 nm-a 5-fold enhancement in Au absorption due to critical coupling to an Al film. Furthermore, we show through ultrafast pump-probe spectroscopy that the Al-coupled samples exhibit a nearly 5-fold improvement in hot-electron injection efficiency as compared to a non-Al device, with the hot-electron lifetimes extending to >2 ps in devices photoexcited with fluence of 0.1 mJ cm-2. The use of an Al film also enhances the photocatalytic yield of H2O2 more than 3-fold in a visible-light-driven reactor. Altogether, we show that the critical coupling of Al films to Au nanoparticles is a low-cost, lithography-free method for improving visible-light capture, extending hot-carrier lifetimes, and ultimately increasing the rate of in situ H2O2 generation.