RESUMO
Obtaining CO and H2 from electrochemical CO2 reduction (CO2RR) offers a viable alternative to reduce CO2 emissions and produce chemicals and fuels. Herein, we report a simple strategy for obtaining polycrystalline copper deposited on oxidized graphite felt (Cu-OGF) and its performance on the selective conversion of CO2 and H2O to CO and H2. For the electrode obtaining, graphite felt (GF) was first oxidized (OGF) in order to make the substrate hydrophilic and then copper particles were electrochemically deposited onto OGF. The pH of deposition was investigated, and the CO2RR activity was assessed for the prepared electrodes at each pH (2.0, 4.0, 6.0, 8.0, and 10.0). It was found that pH 2.0 was the most promising for CO2RR due to the presence of hexagonal copper microparticles. Fourier transform infrared analysis of the produced gases showed that this is a low-cost catalyst capable of reducing CO2 and H2O to CO and H2, with Faradaic efficiencies between 0.50 and 5.21% for CO and 50.87 to 98.30% for H2, depending on the experimental conditions. Hence, it is possible for this gas mixture to be used as a fuel gas or to be enriched with CO for use in Fischer-Tropsch processes.
RESUMO
Gelatin (GE), amino-functionalized polyphenolic tannin derivative (TN), and graphene oxide (GO) were associated to yield thermo- and pH-responsive hydrogels for the first time. Durable hydrogel assemblies for drug delivery purposes were developed using the photosensitizer methylene blue (MB) as a drug model. The cooling GE/TN blends provide brittle physical assemblies. To overcome this disadvantage, different GO contents (between 0.31% and 1.02% wt/wt) were added to the GE/TN blend at 89.7/10.3 wt/wt. FTIR and RAMAN spectroscopy analyses characterized the materials, indicating GO presence in the hydrogels. Incorporation studies revealed a total MB (0.50 mg/mL) incorporation into the GE/TN-GO hydrogel matrices. Additionally, the proposed systems present a mechanical behavior similar to gel. The GO presence in the hydrogel matrices increased the elastic modulus from 516 to 1650 Pa. SEM revealed that hydrogels containing MB present higher porosity with interconnected pores. Dissolution and swelling degree studies revealed less stability of the GE/TN-GO-MB hydrogels in SGF medium (pH 1.2) than SIF (pH 6.8). The degradation increased in SIF with the GO content, making the polymeric matrices more hydrophilic. MB release studies revealed a process controlled by Fickian diffusion. Our results point out the pH-responsible behavior of mechanically reinforced GE/TN-GO-MB hydrogels for drug delivery systems purposes.
Assuntos
Sistemas de Liberação de Medicamentos/métodos , Gelatina/química , Grafite/química , Hidrogéis/química , Azul de Metileno/administração & dosagem , Taninos/química , Temperatura de Transição , Materiais Biocompatíveis/química , Difusão , Liberação Controlada de Fármacos , Módulo de Elasticidade , Concentração de Íons de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Transição de Fase , PorosidadeRESUMO
Photocatalytic activity of TiO2 nanoparticles is highly dependent on their phase composition. The coexistence of anatase and rutile phases in a single nanoparticle eases the electron transfer process between the phases, and favors the separation of photogenerated pairs. In this work, highly photoactive mixed-phase TiO2 nanostructures were prepared by supercritical antisolvent precipitation (SAS), an environmentally friendly technology. It is shown here that this methodology has the remarkable ability to produce highly porous (515â¯m2/g) and crystalline TiO2 nanoparticles. The phase composition of as-prepared TiO2 samples can be tailored through annealing process. Several mixed-phase TiO2 samples were tested to assess the correlation between photocatalytic activity and phase composition. The photocatalytic performance is strongly affected by the anatase-rutile ratio, since the synergism between phases enhances the charge separation, reducing the recombination effect of the photogenerated pairs (e-/h+). It was found that the nanocatalyst composed by 7.0â¯wt% of rutile phase and 93.0â¯wt% of anatase phase, named as TiO2_650, presented the highest photodegradation for both methyl orange (MO) and methylene blue (MB) dyes. Interestingly, TiO2 samples prepared by SAS have superior photoactivity than the benchmark photocatalyst names as P25, which is a widely used TiO2 material composed of anatase and rutile phases.