Impedance Analysis of Capacitive and Faradaic Processes in the Pt/[Dema][TfO] Interface.

The electrochemical reaction kinetics, especially the oxygen reduction reaction (ORR) at the cathode, is crucial for the performance of a fuel cell. In this study, the electrochemical processes on a polycrystalline Pt electrode in the presence of protic ionic liquid (PIL) electrolyte diethylmethylammonium triflate [Dema][TfO] are investigated by means of cyclic voltammetry and electrochemical impedance spectroscopy. Since water is continually produced during fuel cell operation, the effect of the water content in the PIL has been intensively analyzed. In order to reveal the dependence of the interfacial reaction characteristics on the electrode potential, the impedance spectra were simulated by an equivalent circuit whose parameters can be related to both Faradaic and capacitive processes. Two interfacial resistances were identified, which differ by about 3 orders of magnitude. The larger one is a charge transfer resistance that can be associated with slow Faradaic processes like the ORR and platinum oxidation/oxide reduction. The smaller resistance is probably linked with fast processes that involve water molecules, such as hydrogen deposition and oxidation. The high- and midfrequency capacitive processes are attributed to "classical" double layer and pseudocapacitive behavior, similar to those identified under nitrogen atmosphere.

Revealing Interfacial Reactions on Pt Electrodes in Ionic Liquids by In Situ Fourier-Transform Infrared Spectroscopy.

In situ monitoring of the electrolyte/electrode interfacial processes, such as the oxygen reduction reaction (ORR), is crucial for the design of electrolytes for fuel cells. In this study, we investigate the electrochemical behavior of platinum electrodes in protic ionic liquids (PILs) by means of in situ Fourier-transform infrared spectroscopy coupled with cyclic voltammetry. The result provides direct evidence of the change of water at the Pt electrode surface due to Pt oxide formation and reduction. A decrease in the interfacial water was observed in the spectra upon the formation of the Pt oxide. Conversely, the local water concentration at the electrode surface increases if the Pt oxide is reduced and the ORR takes place. At the same time, more cations replace anions on the electrode. The ORR kinetics in the [TFSI]-based PILs is slower than in the [TfO]-based ones, which could result from a blockage of catalytic sites by the adsorbed [TFSI] anions. It suggests that reducing the anion adsorption on the platinum surface could provide an opportunity to enhance the ORR activity.

Self-Standing, Ultrasonic Spray-Deposited Membranes for Fuel Cells.

The polymer electrolyte membrane and its contact with electrodes has a significant effect on the performance of fuel and electrolysis cells but the choice of commercially available membranes is limited. In this study, membranes for direct methanol fuel cells (DMFCs) were made by ultrasonic spray deposition from commercial Nafion solution; the effect of the drying temperature and presence of high boiling solvents on the membrane properties was then analyzed. When choosing suitable conditions, membranes with similar conductivity, water uptake, and higher crystallinity than comparable commercial membranes can be obtained. These show similar or superior performance in DMFC operation compared to commercial Nafion 115. Furthermore, they exhibit low permeability for hydrogen, which makes them attractive for electrolysis or hydrogen fuel cells. The findings from our work will allow for the adjustment of membrane properties to the specific requirements of fuel cells or water electrolysis, as well as the inclusion of additional functional components for composite membranes.

The Structure of the Electric Double Layer of the Protic Ionic Liquid [Dema][TfO] Analyzed by Atomic Force Spectroscopy.

Protic ionic liquids are promising electrolytes for fuel cell applications. They would allow for an increase in operation temperatures to more than 100 °C, facilitating water and heat management and, thus, increasing overall efficiency. As ionic liquids consist of bulky charged molecules, the structure of the electric double layer significantly differs from that of aqueous electrolytes. In order to elucidate the nanoscale structure of the electrolyte-electrode interface, we employ atomic force spectroscopy, in conjunction with theoretical modeling using molecular dynamics. Investigations of the low-acidic protic ionic liquid diethylmethylammonium triflate, in contact with a platinum (100) single crystal, reveal a layered structure consisting of alternating anion and cation layers at the interface, as already described for aprotic ionic liquids. The structured double layer depends on the applied electrode potential and extends several nanometers into the liquid, whereby the stiffness decreases with increasing distance from the interface. The presence of water distorts the layering, which, in turn, significantly changes the system's electrochemical performance. Our results indicate that for low-acidic ionic liquids, a careful adjustment of the water content is needed in order to enhance the proton transport to and from the catalytic electrode.

Constructing a Multifunctional Interface between Membrane and Porous Transport Layer for Water Electrolyzers.

The cell performance and durability of polymer electrolyte membrane (PEM) water electrolyzers are limited by the surface passivation of titanium-based porous transport layers (PTLs). In order to ensure stable performance profiles over time, large amounts (≥1 mg·cm-2) of noble metals (Au, Pt, Ir) are most widely used to coat titanium-based PTLs. However, their high cost is still a major obstacle toward commercialization and widespread application. In this paper, we assess different loadings of iridium, ranging from 0.005 to 0.05 mg·cm-2 in titanium PTLs, that consequently affect the investment costs of PEM water electrolyzers. Concerning a reduction in the precious metal costs, we found that Ir as a protective layer with a loading of 0.025 mg·cm-2 on the PTLs would be sufficient to achieve the same cell performance as PTLs with a higher Ir loading. This Ir loading is a 40-fold reduction over the Au or Pt loading typically used for protective layers in current commercial PEM water electrolyzers. We show that the Ir protective layer here not only decreases the Ohmic resistance significantly, which is the largest part of the gain in performance, but moreover, the oxygen evolution reaction activity of the iridium layer makes it promising as a cost-effective catalyst layer. Our work also confirms that the proper construction of a multifunctional interface between a membrane and a PTL indeed plays a crucial role in guaranteeing the superior performance and efficiency of electrochemical devices.

Acidic Ionic Liquids Enabling Intermediate Temperature Operation Fuel Cells.

Herein we show that protic ionic liquids (PILs) are promising electrolytes for fuel cells operating in the temperature range 100-120 °C. N,N-Diethyl-N-methyl-3-sulfopropan-1-ammonium hydrogen sulfate ([DEMSPA][HSA]), N,N-diethyl-N-methyl-3-sulfopropan-1-ammonium triflate ([DEMSPA][TfO]), N,N-diethyl-3-sulfopropan-1-ammonium hydrogen sulfate ([DESPA][HSA]), and N,N-diethyl-3-sulfopropan-1-ammonium triflate ([DESPA][TfO]) are investigated in this study with regard to their specific conductivity, thermal stability, viscosity, and electrochemical properties. The [DEMSPA][TfO] and [DESPA][TfO] electrolytes offer high limiting current densities for the oxygen reduction reaction (ORR) on platinum electrodes, that is, about 1 order of magnitude larger than 98% H3PO4. This is explained by the minor poisoning of the Pt catalyst and the significantly larger product of the oxygen self-diffusion coefficient and concentration in these two PILs.