Motion artifact correction for cone beam CT stroke imaging: a prospective series.

BACKGROUND: Imaging assessment for acute ischemic stroke (AIS) patients in the angiosuite using cone beam CT (CBCT) has created increased interest since endovascular treatment became the first line therapy for proximal vessel occlusions. One of the main challenges of CBCT imaging in AIS patients is degraded image quality due to motion artifacts. This study aims to evaluate the prevalence of motion artifacts in CBCT stroke imaging and the effectiveness of a novel motion artifact correction algorithm for image quality improvement. METHODS: Patients presenting with acute stroke symptoms and considered for endovascular treatment were included in the study. CBCT scans were performed using the angiosuite X-ray system. All CBCT scans were post-processed using a motion artifact correction algorithm. Motion artifacts were scored before and after processing using a 4-point scale. RESULTS: We prospectively included 310 CBCT scans from acute stroke patients. 51% (n=159/310) of scans had motion artifacts, with 24% being moderate to severe. The post-processing algorithm improved motion artifacts in 91% of scans with motion (n=144/159), restoring clinical diagnostic capability in 34%. Overall, 76% of the scans were sufficient for clinical decision-making before correction, which improved to 93% (n=289/310) after post-processing with our algorithm. CONCLUSIONS: Our results demonstrate that CBCT motion artifacts are significantly reduced using a novel post-processing algorithm, which improved brain CBCT image quality and diagnostic assessment for stroke. This is an important step on the road towards a direct-to-angio approach for endovascular thrombectomy (EVT) treatment.

The butterfly effect: improving brain cone-beam CT image artifacts for stroke assessment using a novel dual-axis trajectory.

BACKGROUND: Cone-beam computed tomography (CBCT) imaging of the brain can be performed in the angiography suite to support various neurovascular procedures. Relying on CBCT brain imaging solely, however, still lacks full diagnostic confidence due to the inferior image quality compared with CT and various imaging artifacts that persist even with modern CBCT. OBJECTIVE: To perform a detailed evaluation of image artifact improvement using a new CBCT protocol which implements a novel dual-axis 'butterfly' trajectory. METHODS: Our study included 94 scans from 47 patients who received CBCT imaging for assessment of either ischemia or hemorrhage during a neurovascular procedure. Both a traditional uni-axis 'circular' and novel dual-axis 'butterfly' protocol were performed on each patient (same-patient control). Each brain scan was divided into six regions and scored out of 3 based on six artifacts originating from various physics-based and patient-based sources. RESULTS: The dual-axis trajectory produces CBCT images with significantly fewer image artifacts than the traditional circular scan (whole brain average artifact score, AS: 0.20 vs 0.33), with the greatest improvement in bone beam hardening (AS: 0.13 vs 0.78) and cone-beam artifacts (AS: 0.04 vs 0.55). CONCLUSIONS: Recent developments in CBCT imaging protocols have significantly improved image artifacts, which has improved diagnostic confidence for stroke and supports a direct-to-angiography suite transfer approach for patients with acute ischemic stroke.

Performance characterization of a prototype dual-layer cone-beam computed tomography system.

PURPOSE: Conventional cone-beam computed tomography CT (CBCT) provides limited discrimination between low-contrast tissues. Furthermore, it is limited to full-spectrum energy integration. A dual-energy CBCT system could be used to separate photon energy spectra with the potential to increase the visibility of clinically relevant features and acquire additional information relevant in a multitude of clinical imaging applications. In this work, the performance of a novel dual-layer dual-energy CBCT (DL-DE-CBCT) C-arm system is characterized for the first time. METHODS: A prototype dual-layer detector was fitted into a commercial interventional C-arm CBCT system to enable DL-DE-CBCT acquisitions. DL-DE reconstructions were derived from material-decomposed Compton scatter and photoelectric base functions. The modulation transfer function (MTF) of the prototype DL-DE-CBCT was compared to that of a commercial CBCT. Noise and uniformity characteristics were evaluated using a cylindrical water phantom. Effective atomic numbers and electron densities were estimated in clinically relevant tissue substitutes. Iodine quantification was performed (for 0.5-15 mg/ml concentrations) and virtual noncontrast (VNC) images were evaluated. Finally, contrast-to-noise ratios (CNR) and CT number accuracies were estimated. RESULTS: The prototype and commercial CBCT showed similar spatial resolution, with a mean 10% MTF of 5.98 cycles/cm and 6.28 cycles/cm, respectively, using a commercial standard reconstruction. The lowest noise was seen in the 80 keV virtual monoenergetic images (VMI) (7.40 HU) and the most uniform images were seen at VMI 60 keV (4.74 HU) or VMI 80 keV (1.98 HU), depending on the uniformity measure used. For all the tissue substitutes measured, the mean accuracy in effective atomic number was 98.2% (SD 1.2%) and the mean accuracy in electron density was 100.3% (SD 0.9%). Iodine quantification images showed a mean difference of -0.1 (SD 0.5) mg/ml compared to the true iodine concentration for all blood and iodine-containing objects. For VNC images, all blood substitutes containing iodine averaged a CT number of 43.2 HU, whereas a blood-only substitute measured 44.8 HU. All water-containing iodine substitutes measured a mean CT number of 2.6 in the VNC images. A noise-suppressed dataset showed a CNR peak at VMI 40 keV and low at VMI 120 keV. In the same dataset without noise suppression applied, a peak in CNR was obtained at VMI 70 keV and a low at VMI 120 keV. The estimated CT numbers of various clinically relevant objects were generally very close to the calculated CT number. CONCLUSIONS: The performance of a prototype dual-layer dual-energy C-arm CBCT system was characterized. Spatial resolution and noise were comparable with a commercially available C-arm CBCT system, while offering dual-energy capability. Iodine quantifications, effective atomic numbers, and electron densities were in good agreement with expected values, indicating that the system can be used to reliably evaluate the material composition of clinically relevant tissues. The VNC and monoenergetic images indicate a consistent ability to separate clinically relevant tissues. The results presented indicate that the system could find utility in diagnostic, interventional, and radiotherapy planning settings.

Novel flat-panel cone-beam CT compared to multi-detector CT for assessment of acute ischemic stroke: A prospective study.

PURPOSE: Cone beam CT (CBCT) imaging assessment of acute ischemic stroke (AIS) patients with large-vessel occlusion (LVO) in the angiosuite may improve stroke workflow and decrease time to recanalization. In order for this workflow to gain widespread acceptance, current CBCT imaging needs further development to improve image quality. Our study aimed to compare the image quality of a new CBCT protocol performed directly in the angiosuite with imaging from multidetector CT as a gold standard. METHODS: AIS patients with an LVO who were candidates for endovascular treatment were prospectively included in this study. Following conventional multidetector CT (MDCT), patients underwent unenhanced cone beam CT (XperCT, Philips) imaging in the angiosuite, using two different protocols: a standard 20.8 s XperCT and/or an improved 10.4 s XperCT protocol. Images were evaluated using both qualitative and quantitative methods. RESULTS: We included 65 patients in the study. Patients received CBCT imaging prior to endovascular treatment; 18 patients were assessed with a standard 20.8 s protocol scans and 47 with a newer 10.4 s scan. The quantitative analysis showed that the mean contrast-to-noise ratio (CNR) was significantly higher for the newer 10.4 s protocol compared with the 20.8 s protocol (2.08 +/- 0.64 vs. 1.15 +/- 0.27, p < 0.004) and the mean image noise was significantly lower for the 10.4 s XperCTs when compared with the 20.8 s XperCTs (6.30 +/- 1.34 vs. 7.82 +/- 2.03, p=<0.003). Qualitative analysis, including 6 measures of image quality, demonstrated that 74.1 % of the 10.4 s XperCT scans were ranked as 'Acceptable' for assessing parenchymal imaging in AIS patients(scoring 3-5 points on a 5-point Likert-scale), compared with 32.4 % of the standard 20.8 s XperCT and 100 % of the MDCT scans. Compared to the MDCT studies, 83 % of the 10.4 s XperCT scans were deemed sufficient image quality for a direct-to-angiosuite selection, compared to only 11 % for the standard 20.8 s scans. The largest image quality improvements included grey/white matter differentiation (59 % improvement), and reduction of image noise and artefacts (63 % & 50 % improvement, respectively). CONCLUSIONS: Continued advances in cone-beam CT allow marked improvements in image quality for the assessment of brain parenchyma, which supports a direct-to-angiosuite approach for AIS patients eligible for thrombectomy treatment.

Feasibility of a Modified Cone-Beam CT Rotation Trajectory to Improve Liver Periphery Visualization during Transarterial Chemoembolization.

PURPOSE: To compare liver coverage and tumor detectability by using preprocedural magnetic resonance (MR) images as a reference, as well as radiation exposure of cone-beam computed tomography (CT) with different rotational trajectories. MATERIALS AND METHODS: Fifteen patients (nine men and six women; mean age ± standard deviation, 65 years ± 5) with primary or secondary liver cancer were retrospectively included in this institutional review board-approved study. A modified cone-beam CT protocol was used in which the C-arm rotates from +55° to -185° (open arc cone-beam CT) instead of -120° to +120° (closed arc cone-beam CT). Each patient underwent two sessions of transarterial chemoembolization between February 2013 and March 2014 with closed arc and open arc cone-beam CT (during the first and second transarterial chemoembolization sessions, respectively, as part of the institutional transarterial chemoembolization protocol). For each cone-beam CT examination, liver volume and tumor detectability were assessed by using MR images as the reference. Radiation exposure was compared by means of a phantom study. For statistical analysis, paired t tests and a Wilcoxon signed rank test were performed. RESULTS: Mean liver volume imaged was 1695 cm(3) ± 542 and 1857 cm(3) ± 571 at closed arc and open arc cone-beam CT, respectively. The coverage of open arc cone-beam CT was significantly higher compared with closed arc cone-beam CT (97% vs 86% of the MR imaging liver volume, P = .002). In eight patients (53%), tumors were partially or completely outside the closed arc cone-beam CT field of view. All tumors were within the open arc cone-beam CT field of view. The open arc cone-beam CT radiation exposure by means of weighted CT index was slightly lower compared with that of closed arc cone-beam CT (-5.1%). CONCLUSION: Open arc cone-beam CT allowed for a significantly improved intraprocedural depiction of peripheral hepatic tumors while achieving a slight radiation exposure reduction.