All-Electrical Driving and Probing of Dressed States in a Single Spin.

The subnanometer distance between tip and sample in a scanning tunneling microscope (STM) enables the application of very large electric fields with a strength as high as ∼1 GV/m. This has allowed for efficient electrical driving of Rabi oscillations of a single spin on a surface at a moderate radiofrequency (RF) voltage on the order of tens of millivolts. Here, we demonstrate the creation of dressed states of a single electron spin localized in the STM tunnel junction by using resonant RF driving voltages. The read-out of these dressed states was achieved all electrically by a weakly coupled probe spin. Our work highlights the strength of the atomic-scale geometry inherent to the STM that facilitates the creation and control of dressed states, which are promising for the design of atomic scale quantum devices using individual spins on surfaces.

An atomic-scale multi-qubit platform.

Individual electron spins in solids are promising candidates for quantum science and technology, where bottom-up assembly of a quantum device with atomically precise couplings has long been envisioned. Here, we realized atom-by-atom construction, coherent operations, and readout of coupled electron-spin qubits using a scanning tunneling microscope. To enable the coherent control of "remote" qubits that are outside of the tunnel junction, we complemented each electron spin with a local magnetic field gradient from a nearby single-atom magnet. Readout was achieved by using a sensor qubit in the tunnel junction and implementing pulsed double electron spin resonance. Fast single-, two-, and three-qubit operations were thereby demonstrated in an all-electrical fashion. Our angstrom-scale qubit platform may enable quantum functionalities using electron spin arrays built atom by atom on a surface.

Influence of the Magnetic Tip on Heterodimers in Electron Spin Resonance Combined with Scanning Tunneling Microscopy.

Investigating the quantum properties of individual spins adsorbed on surfaces by electron spin resonance combined with scanning tunneling microscopy (ESR-STM) has shown great potential for the development of quantum information technology on the atomic scale. A magnetic tip exhibiting high spin polarization is critical for performing an ESR-STM experiment. While the tip has been conventionally treated as providing a static magnetic field in ESR-STM, it was found that the tip can exhibit bistability, influencing ESR spectra. Ideally, the ESR splitting caused by the magnetic interaction between two spins on a surface should be independent of the tip. However, we found that the measured ESR splitting of a metal atom-molecule heterodimer can be tip-dependent. Detailed theoretical analysis reveals that this tip-dependent ESR splitting is caused by a different interaction energy between the tip and each spin of the heterodimer. Our work provides a comprehensive reference for characterizing tip features in ESR-STM experiments and highlights the importance of employing a proper physical model when describing the ESR tip, in particular, for heterospin systems.

Electric-Field-Driven Spin Resonance by On-Surface Exchange Coupling to a Single-Atom Magnet.

Coherent control of individual atomic and molecular spins on surfaces has recently been demonstrated by using electron spin resonance (ESR) in a scanning tunneling microscope (STM). Here, a combined experimental and modeling study of the ESR of a single hydrogenated Ti atom that is exchange-coupled to a Fe adatom positioned 0.6-0.8 nm away by means of atom manipulation is presented. Continuous wave and pulsed ESR of the Ti spin show a Rabi rate with two contributions, one from the tip and the other from the Fe, whose spin interactions with Ti are modulated by the radio-frequency electric field. The Fe contribution is comparable to the tip, as revealed by its dominance when the tip is retracted, and tunable using a vector magnetic field. The new ESR scheme allows on-surface individual spins to be addressed and coherently controlled without the need for magnetic interaction with a tip. This study establishes a feasible implementation of spin-based multi-qubit systems on surfaces.

Double-Resonance Spectroscopy of Coupled Electron Spins on a Surface.

Scanning-tunneling microscopy (STM) combined with electron spin resonance (ESR) has enabled single-spin spectroscopy with nanoelectronvolt energy resolution and angstrom-scale spatial resolution, which allows quantum sensing and magnetic resonance imaging at the atomic scale. Extending this spectroscopic tool to a study of multiple spins, however, is nontrivial due to the extreme locality of the STM tunnel junction. Here we demonstrate double electron-electron spin resonance spectroscopy in an STM for two coupled atomic spins by simultaneously and independently driving them using two continuous-wave radio frequency voltages. We show the ability to drive and detect the resonance of a spin that is remote from the tunnel junction while read-out is achieved via the spin in the tunnel junction. Open quantum system simulations for two coupled spins reproduce all double-resonance spectra and further reveal a relaxation time of the remote spin that is longer by an order of magnitude than that of the local spin in the tunnel junction. Our technique can be applied to quantum-coherent multi-spin sensing, simulation, and manipulation in engineered spin structures on surfaces.

Template-directed 2D nanopatterning of S = 1/2 molecular spins.

Molecular spins are emerging platforms for quantum information processing. By chemically tuning their molecular structure, it is possible to prepare a robust environment for electron spins and drive the assembly of a large number of qubits in atomically precise spin-architectures. The main challenges in the integration of molecular qubits into solid-state devices are (i) minimizing the interaction with the supporting substrate to suppress quantum decoherence and (ii) controlling the spatial distribution of the spins at the nanometer scale to tailor the coupling among qubits. Herein, we provide a nanofabrication method for the realization of a 2D patterned array of individually addressable Vanadyl Phthalocyanine (VOPc) spin qubits. The molecular nanoarchitecture is crafted on top of a diamagnetic monolayer of Titanyl Phthalocyanine (TiOPc) that electronically decouples the electronic spin of VOPc from the underlying Ag(100) substrate. The isostructural TiOPc interlayer also serves as a template to regulate the spacing between VOPc spin qubits on a scale of a few nanometers, as demonstrated using scanning tunneling microscopy, X-ray circular dichroism, and density functional theory. The long-range molecular ordering is due to a combination of charge transfer from the metallic substrate and strain in the TiOPc interlayer, which is attained without altering the pristine VOPc spin characteristics. Our results pave a viable route towards the future integration of molecular spin qubits into solid-state devices.

Anisotropic Hyperfine Interaction of Surface-Adsorbed Single Atoms.

Hyperfine interactions have been widely used in material science, organic chemistry, and structural biology as a sensitive probe to local chemical environments. However, traditional ensemble measurements of hyperfine interactions average over a macroscopic number of spins with different geometrical locations and nuclear isotopes. Here, we use a scanning tunneling microscope (STM) combined with electron spin resonance (ESR) to measure hyperfine spectra of hydrogenated-Ti on MgO/Ag(100) at low-symmetry binding sites and thereby determine the isotropic and anisotropic hyperfine interactions at the single-atom level. Combining vector-field ESR spectroscopy with STM-based atom manipulation, we characterize the full hyperfine tensors of 47Ti and 49Ti and identify significant spatial anisotropy of the hyperfine interactions for both isotopes. Density functional theory calculations reveal that the large hyperfine anisotropy arises from highly anisotropic distributions of the ground-state electron spin density. Our work highlights the power of ESR-STM-enabled single-atom hyperfine spectroscopy in revealing electronic ground states and atomic-scale chemical environments.

Electron spin resonance of single iron phthalocyanine molecules and role of their non-localized spins in magnetic interactions.

Electron spin resonance (ESR) spectroscopy is a crucial tool, through spin labelling, in investigations of the chemical structure of materials and of the electronic structure of materials associated with unpaired spins. ESR spectra measured in molecular systems, however, are established on large ensembles of spins and usually require a complicated structural analysis. Recently, the combination of scanning tunnelling microscopy with ESR has proved to be a powerful tool to image and coherently control individual atomic spins on surfaces. Here we extend this technique to single coordination complexes-iron phthalocyanines (FePc)-and investigate the magnetic interactions between their molecular spin with either another molecular spin (in FePc-FePc dimers) or an atomic spin (in FePc-Ti pairs). We show that the molecular spin density of FePc is both localized at the central Fe atom and also distributed to the ligands (Pc), which yields a strongly molecular-geometry-dependent exchange coupling.

Coherent Spin Control of Single Molecules on a Surface.

Control of single electron spins constitutes one of the most promising platforms for spintronics, quantum sensing, and quantum information processing. Utilizing single molecular magnets as their hosts establishes an interesting framework since their molecular structure is highly flexible and chemistry-based large-scale synthesis directly provides a way toward scalability. Here, we demonstrate coherent spin manipulation of single molecules on a surface, which we control individually using a scanning tunneling microscope in combination with electron spin resonance. We previously found that iron phthalocyanine (FePc) molecules form a spin-1/2 system when placed on an insulating thin film of magnesium oxide (MgO). Performing Rabi oscillation and Hahn echo measurements, we show that the FePc spin can be coherently manipulated with a phase coherence time T2Echo of several hundreds of nanoseconds. Tunneling current-dependent measurements demonstrate that interaction with the tunneling electrons is the dominating source of decoherence. In addition, we perform Hahn echo measurements on small self-assembled arrays of FePc molecules. We show that, despite additional intermolecular magnetic coupling, spin resonance and T2Echo are much less perturbed by T1 spin flip events of neighboring spins than by the tunneling current. This will potentially allow for individual addressable molecular spins in self-assemblies and with application for quantum information processing.

Correlation between Electronic Configuration and Magnetic Stability in Dysprosium Single Atom Magnets.

Single atom magnets offer the possibility of magnetic information storage in the most fundamental unit of matter. Identifying the parameters that control the stability of their magnetic states is crucial to design novel quantum magnets with tailored properties. Here, we use X-ray absorption spectroscopy to show that the electronic configuration of dysprosium atoms on MgO(100) thin films can be tuned by the proximity of the metal Ag(100) substrate onto which the MgO films are grown. Increasing the MgO thickness from 2.5 to 9 monolayers induces a change in the dysprosium electronic configuration from 4f9 to 4f10. Hysteresis loops indicate long magnetic lifetimes for both configurations, however, with a different field-dependent magnetic stability. Combining these measurements with scanning tunneling microscopy, density functional theory, and multiplet calculations unveils the role of the adsorption site and charge transfer to the substrate in determining the stability of quantum states in dysprosium single atom magnets.

Mapping Orbital-Resolved Magnetism in Single Lanthanide Atoms.

Single lanthanide atoms and molecules are promising candidates for atomic data storage and quantum logic due to the long lifetime of their magnetic quantum states. Accessing and controlling these states through electrical transport requires precise knowledge of their electronic configuration at the level of individual atomic orbitals, especially of the outer shells involved in transport. However, no experimental techniques have so far shown the required sensitivity to probe single atoms with orbital selectivity. Here we resolve the magnetism of individual orbitals in Gd and Ho single atoms on MgO/Ag(100) by combining X-ray magnetic circular dichroism with multiplet calculations and density functional theory. In contrast to the usual assumption of bulk-like occupation of the different electronic shells, we establish a charge transfer mechanism leading to an unconventional singly ionized configuration. Our work identifies the role of the valence electrons in determining the quantum level structure and spin-dependent transport properties of lanthanide-based nanomagnets.

Atomic-scale intermolecular interaction of hydrogen with a single VOPc molecule on the Au(111) surface.

Molecular dynamics of hydrogen molecules (H2) on surfaces and their interactions with other molecules have been studied with the goal of improvement of hydrogen storage devices for energy applications. Recently, the dynamic behavior of a H2 at low temperature has been utilized in scanning tunnelling microscopy (STM) for sub-atomic resolution imaging within a single molecule. In this work, we have investigated the intermolecular interaction between H2 and individual vanadyl phthalocyanine (VOPc) molecules on Au(111) substrates by using STM and non-contact atomic force microscopy (NC-AFM). We measured tunnelling spectra and random telegraphic noise (RTN) on VOPc molecules to reveal the origin of the dynamic behavior of the H2. The tunnelling spectra show switching between two states with different tunnelling conductance as a function of sample bias voltage and RTN is measured near transition voltage between the two states. The spatial variation of the RTN indicates that the two-state fluctuation is dependent on the atomic-scale interaction of H2 with the VOPc molecule. Density functional theory calculations show that a H2 molecule can be trapped by a combination of a tip-induced electrostatic potential well and the potential formed by a VOPc underneath. We suggest the origin of the two-state noise as transition of H2 between minima in these potentials with barrier height of 20-30 meV. In addition, the bias dependent AFM images verify that H2 can be trapped and released at the tip-sample junction.

A novel device for elimination of cancer cells from blood specimens.

Circulating tumor cells (CTCs) are derivatives of solid cancerous lesions that detach from the tumor mass and enter the blood circulation. CTCs are considered to be the precursors of metastasis in several cancer types. They are present in the blood of cancer patients as single cells or clusters, with the latter being associated with a higher metastatic potential. Methods to eliminate CTCs from the bloodstream are currently lacking. Here, we took advantage of the lower shear stress-resistance of cancer cells compared to blood cells, and developed a device that can eliminate cancer cells without blood damage. The device consists of an axial pump and a coupled rotating throttle, controllable to prevent local blood flow impairment, yet maintaining a constant shear performance. When processing cancer cells through our device, we observe cancer cell-cluster disruption and viability reduction of single cancer cells, without noticeable effects on human blood cells. When injecting cancer cell-containing samples into tumor-free recipient mice, processed samples fail to generate metastasis. Together, our data show that a selective disruption of cancer cells is possible while preserving blood cells, paving the way towards the development of novel, implantable tools for CTC disruption and metastasis prevention.

Probing Magnetism in Artificial Metal-Organic Complexes Using Electronic Spin Relaxometry.

Single spins are considered as a versatile candidate for miniaturizing information devices down to the nanoscale. To engineer the spin's properties, metal-organic frameworks provide a promising route which in turn requires thorough understanding of the metal-molecule interaction. Here, we investigate the magnetic robustness of a single iron (Fe) atom in artificially built Fe-tetracyanoethylene (TCNE) complexes by using low-temperature scanning tunneling microscopy (STM). We find that the magnetic anisotropy and spin relaxation dynamics of the Fe atom within the complexes remain unperturbed in comparison to well-isolated Fe atoms. Density functional theory (DFT) calculations support our experimental findings, suggesting that the 3d orbitals of the Fe atom remain largely undisturbed while the 4s and 4p orbitals are rearranged in the process of forming a complex. To precisely determine the location of the spin center within the complex, we utilize STM-based spin relaxometry, mapping out the spatial dependence of spin relaxation with subnanometer resolution. Our work suggests that the magnetic properties of atoms can remain unchanged while being embedded in a weakly bound molecular framework.

Efficient Ab Initio Multiplet Calculations for Magnetic Adatoms on MgO.

Scanning probe microscopy and spectroscopy, and more recently, single-atom electron spin resonance, have allowed the direct observation of electron dynamics at the atomic limit. The interpretation of data is strongly dependent on model Hamiltonians. However, fitting effective spin Hamiltonians to experimental data lacks the ability to explore a vast number of potential systems of interest. By using plane-wave density functional theory as starting point, we build a multiplet Hamiltonian making use of maximally localized Wannier functions. The Hamiltonian contains spin-orbit and electron-electron interactions needed to obtain the relevant spin dynamics. The resulting reduced Hamiltonian is solved by exact diagonalization. We compare three prototypical cases of 3d transition metals Mn (total spin S = 5/2), Fe (S = 2), and Co (S = 3/2) on MgO with experimental data and find that our calculations can accurately predict the spin orientation and anisotropy of the magnetic adatom. Our method does not rely on experimental input and allows us to explore and predict the fundamental magnetic properties of adatoms on surfaces.

Modeling of Zinc Dynamics in the Synaptic Cleft: Implications for Cadherin Mediated Adhesion and Synaptic Plasticity.

While the numerous influences of synaptically released zinc on synaptic efficiency during long-term potentiation have been discussed by many authors already, we focused on the possible effect of zinc on cadherins and therefore its contribution to morphological changes in the context of synaptic plasticity. The difficulty with gaining insights into the dynamics of zinc-cadherin interaction is the inability to directly observe it on a suitable timescale. Therefore our approach was to establish an analytical model of the zinc diffusion dynamics in the synaptic cleft and experimentally validate, if the theoretical concentrations at the periphery of the synaptic cleft are sufficient to significantly modulate cadherin-mediated adhesion. Our results emphasize, that synaptically released zinc might have a strong accelerating effect on the morphological changes involved in long-term synaptic plasticity. The approach presented here might also prove useful for investigations on other synaptically released trace metals.

High-Efficiency Polycrystalline Perovskite Light-Emitting Diodes Based on Mixed Cations.

We have achieved high-efficiency polycrystalline perovskite light-emitting diodes (PeLEDs) based on formamidinium (FA) and cesium (Cs) mixed cations without quantum dot synthesis. Uniform single-phase FA1- xCs xPbBr3 polycrystalline films were fabricated by one-step formation with various FA:Cs molar proportions; then the influences of chemical composition on film morphology, crystal structure, photoluminescence (PL), and electroluminescence (EL) were systematically investigated. Incorporation of Cs+ cations in FAPbBr3 significantly reduced the average grain size (to 199 nm for FA:Cs = 90:10) and trap density; these changes consequently increased PL quantum efficiency (PLQE) and PL lifetime of FA1- xCs xPbBr3 films and current efficiency (CE) of PeLEDs. Further increase in Cs molar proportion from 10 mol % decreased crystallinity and purity, increased trap density, and correspondingly decreased PLQE, PL lifetime, and CE. Incorporation of Cs also increased photostability of FA1- xCs xPbBr3 films, possibly due to suppressed formation of light-induced metastable states. FA1- xCs xPbBr3 PeLEDs show the maximum CE = 14.5 cd A-1 at FA:Cs = 90:10 with very narrow EL spectral width (21-24 nm); this is the highest CE among FA-Cs-based PeLEDs reported to date. This work provides an understanding of the influences of Cs incorporation on the chemical, structural, and luminescent properties of FAPbBr3 polycrystalline films and a breakthrough to increase the efficiency of FA1- xCs xPbBr3 PeLEDs.

Improving the Stability of Metal Halide Perovskite Materials and Light-Emitting Diodes.

Metal halide perovskites (MHPs) have numerous advantages as light emitters such as high photoluminescence quantum efficiency with a direct bandgap, very narrow emission linewidth, high charge-carrier mobility, low energetic disorder, solution processability, simple color tuning, and low material cost. Based on these advantages, MHPs have recently shown unprecedented radical progress (maximum current efficiency from 0.3 to 42.9 cd A-1 ) in the field of light-emitting diodes. However, perovskite light-emitting diodes (PeLEDs) suffer from intrinsic instability of MHP materials and instability arising from the operation of the PeLEDs. Recently, many researchers have devoted efforts to overcome these instabilities. Here, the origins of the instability in PeLEDs are reviewed by categorizing it into two types: instability of (i) the MHP materials and (ii) the constituent layers and interfaces in PeLED devices. Then, the strategies to improve the stability of MHP materials and PeLEDs are critically reviewed, such as A-site cation engineering, Ruddlesden-Popper phase, suppression of ion migration with additives and blocking layers, fabrication of uniform bulk polycrystalline MHP layers, and fabrication of stable MHP nanoparticles. Based on this review of recent advances, future research directions and an outlook of PeLEDs for display applications are suggested.

Polaronic Charge Carrier-Lattice Interactions in Lead Halide Perovskites.

Almost ten years after the renaissance of the popular perovskite-type semiconductors based on lead salts with the general formula AMX3 (A=organic or inorganic cation; M=divalent metal; X=halide), many facets of photophysics continue to puzzle researchers. In this Minireview, light is shed on the low mobilities of charge carriers in lead halide perovskites with special focus on the lattice properties at non-zero temperature. The polar and soft lattice leads to pronounced electron-phonon coupling, limiting carrier mobility and retarding recombination. We propose that the proper picture of excited charge carriers at temperature ranges that are relevant for device operations is that of a polaron, with Fröhlich coupling constants between 1<α<3. Under the aspect of light-emitting diode application, APbX3 perovskite show moderate second order (bimolecular) recombination rates and high third-order (Auger) rate constants. It has become apparent that this is a direct consequence of the anisotropic polar A-site cation in organic-inorganic hybrid perovskites and might be alleviated by replacing the organic moiety with an isotropic cation.

Ultrapure Green Light-Emitting Diodes Using Two-Dimensional Formamidinium Perovskites: Achieving Recommendation 2020 Color Coordinates.

Pure green light-emitting diodes (LEDs) are essential for realizing an ultrawide color gamut in next-generation displays, as is defined by the recommendation (Rec.) 2020 standard. However, because the human eye is more sensitive to the green spectral region, it is not yet possible to achieve an ultrapure green electroluminescence (EL) with a sufficiently narrow bandwidth that covers >95% of the Rec. 2020 standard in the CIE 1931 color space. Here, we demonstrate efficient, ultrapure green EL based on the colloidal two-dimensional (2D) formamidinium lead bromide (FAPbBr3) hybrid perovskites. Through the dielectric quantum well (DQW) engineering, the quantum-confined 2D FAPbBr3 perovskites exhibit a high exciton binding energy of 162 meV, resulting in a high photoluminescence quantum yield (PLQY) of ∼92% in the spin-coated films. Our optimized LED devices show a maximum current efficiency (ηCE) of 13.02 cd A-1 and the CIE 1931 color coordinates of (0.168, 0.773). The color gamut covers 97% and 99% of the Rec. 2020 standard in the CIE 1931 and the CIE 1976 color space, respectively, representing the "greenest" LEDs ever reported. Moreover, the device shows only a ∼10% roll-off in ηCE (11.3 cd A-1) at 1000 cd m-2. We further demonstrate large-area (3 cm2) and ultraflexible (bending radius of 2 mm) LEDs based on 2D perovskites.