Two-dimensional materials for high density, safe and robust metal anodes batteries.

With a high specific capacity and low electrochemical potentials, metal anode batteries that use lithium, sodium and zinc metal anodes, have gained great research interest in recent years, as a potential candidate for high-energy-density storage systems. However, the uncontainable dendrite growth during the repeated charging process, deteriorates the battery performance, reduces the battery life and more importantly, raises safety concerns. With their unique properties, two-dimensional (2D) materials, can be used to modify various components in metal batteries, eventually mitigating the dendrite growth, enhancing the cycling stability and rate capability, thus leading to safe and robust metal anodes. In this paper, we review the recent advances of 2D materials and summarize current research progress of using 2D materials in the applications of (i) anode design, (ii) separator engineering, and (iii) electrolyte modifications by guiding metal ion nucleation, increasing ion conductivity, homogenizing the electric field and ion flux, and enhancing the mechanical strength for safe metal anodes. The 2D material modifications provide the ultimate solution for obtaining dendrite-free metal anodes, realizes the high energy storage application, and indicates the importance of 2D materials development. Finally, in-depth understandings of subsequent metal growth are lacking due to research limitations, while more advanced characterizations are welcome for investigating the metal deposition mechanism. The more facile and simplified preparation of 2D materials possess great prospects in high energy density metal anode batteries, and thus fulfils the development of EVs.

Machine Learning-Aided Design of Gold Core-Shell Nanocatalysts toward Enhanced and Selective Photooxygenation.

We demonstrate the use of the machine learning (ML) tools to rapidly and accurately predict the electric field as a guide for designing core-shell Au-silica nanoparticles to enhance 1O2 sensitization and selectivity of organic synthesis. Based on the feature importance analysis, obtained from a deep neural network algorithm, we found a general and linear dependent descriptor (θ ∝ aD0.25t-1, where a, D, and t are the shape constant, size of metal nanoparticles, and distance from the metal surface) for the electric field around the core-shell plasmonic nanoparticle. Directed by the new descriptor, we synthesized gold-silica nanoparticles and validated their plasmonic intensity using scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) mapping. The nanoparticles with θ = 0.40 demonstrate an ∼3-fold increase in the reaction rate of photooxygenation of anthracene and 4% increase in the selectivity of photooxygenation of dihydroartemisinic acid (DHAA), a long-standing goal in organic synthesis. In addition, the combination of ML and experimental investigations shows the synergetic effect of plasmonic enhancement and fluorescence quenching, leading to enhancement for 1O2 generation. Our results from time-dependent density functional theory (TD-DFT) calculations suggest that the presence of an electric field can favor intersystem crossing (ISC) of methylene blue to enhance 1O2 generation. The strategy reported here provides a data-driven catalyst preparation method that can significantly reduce experimental cost while paving the way for designing photocatalysts for organic drug synthesis.

Band Alignment Engineering by Twist Angle and Composition Modulation for Heterobilayer.

Atomically thin monolayer semiconducting transition metal dichalcogenides (TMDs), exhibiting direct band gap and strong light-matter interaction, are promising for optoelectronic devices. However, an efficient band alignment engineering method is required to further broaden their practical applications as versatile optoelectronics. In this work, the band alignment of two vertically stacked monolayer TMDs using the chemical vapor deposition (CVD) method is effectively tuned by two strategies: 1) formulating the compositions of MoS2(1-x) Se2x alloys, and 2) varying the twist angles of the stacked heterobilayer structures. Photoluminescence (PL) results combined with density functional theory (DFT) calculation show that by changing the alloy composition, a continuously tunable band alignment and a transition of type II-type I-type II band alignment of TMD heterobilayer is achieved. Moreover, only at moderate (10°-50°) twist angles, a PL enhancement of 28%-110% caused by the type I alignment is observed, indicating that the twist angle is coupled with the global band structure of heterobilayer. A heterojunction device made with MoS0.76 Se1.24 /WS2 of 14° displays a significantly high photoresponsivity (55.9 A W-1 ), large detectivity (1.07 × 1010 Jones), and high external quantum efficiency (135%). These findings provide engineering tools for heterostructure design for their application in optoelectronic devices.

Conductive Hydrogel Conduits with Growth Factor Gradients for Peripheral Nerve Repair in Diabetics with Non-Suture Tape.

Diabetic patients suffer from peripheral nerve injury with slow and incomplete regeneration owing to hyperglycemia and microvascular complications. This study develops a graphene-based nerve guidance conduit by incorporating natural double network hydrogel and a neurotrophic concentration gradient with non-invasive treatment for diabetics. GelMA/silk fibroin double network hydrogel plays quadruple roles for rapid setting/curing, suitable mechanical supporting, good biocompatibility, and sustainable growth factor delivery. Meanwhile, graphene mesh can improve the toughness of conduit and enhance conductivity of conduit for regeneration. Here, novel silk tapes show quick and tough adhesion of wet tissue by dual mechanism to replace suture step. The in vivo results demonstrate that gradient concentration of netrin-1 in conduit have better performance than uniform concentration caused by chemotaxis phenomenon for axon extension, remyelination, and angiogenesis. Altogether, GelMA/silk graphene conduit with gradient netrin-1 and dry double-sided adhesive tape can significantly promote repairing of peripheral nerve injury and inhibit the atrophy of muscles for diabetics.

Rational Control on Quantum Emitter Formation in Carbon-Doped Monolayer Hexagonal Boron Nitride.

Single-photon emitters (SPEs) in hexagonal boron nitride (hBN) are promising candidates for quantum light generation. Despite this, techniques to control the formation of hBN SPEs down to the monolayer limit are yet to be demonstrated. Recent experimental and theoretical investigations have suggested that the visible wavelength single-photon emitters in hBN originate from carbon-related defects. Here, we demonstrate a simple strategy for controlling SPE creation during the chemical vapor deposition growth of monolayer hBN via regulating surface carbon concentration. By increasing the surface carbon concentration during hBN growth, we observe increases in carbon doping levels by 2.4-fold for B-C bonds and 1.6-fold for N-C bonds. For the same samples, we observe an increase in the SPE density from 0.13 to 0.30 emitters/µm2. Our simple method enables the reliable creation of hBN SPEs in monolayer samples for the first time, opening the door to advanced two-dimensional (2D) quantum state engineering.

Aligned Graphene Mesh-Supported Double Network Natural Hydrogel Conduit Loaded with Netrin-1 for Peripheral Nerve Regeneration.

The gold standard treatment for peripheral nerve injuries (PNIs) is the autologous graft, while it is associated with the shortage of donors and results in major complications. In the present study, we engineer a graphene mesh-supported double-network (DN) hydrogel scaffold, loaded with netrin-1. Natural alginate and gelatin-methacryloyl entangled hydrogel that is synthesized via fast exchange of ions and ultraviolet irradiation provide proper mechanical strength and excellent biocompatibility and can also serve as a reservoir for netrin-1. Meanwhile, the graphene mesh can promote the proliferation of Schwann cells and guide their alignments. This approach allows scaffolds to have an acceptable Young's modulus of 725.8 ± 46.52 kPa, matching with peripheral nerves, as well as a satisfactory electrical conductivity of 6.8 ± 0.85 S/m. In addition, netrin-1 plays a dual role in directing axon pathfinding and neuronal migration that optimizes the tube formation ability at a concentration of 100 ng/mL. This netrin-1-loaded graphene mesh tube/DN hydrogel nerve scaffold can significantly promote the regeneration of peripheral nerves and the restoration of denervated muscle, which is even superior to autologous grafts. Our findings may provide an effective therapeutic strategy for PNI patients that can replace the scarce autologous graft.

Confinement-Enhanced Rapid Interlayer Diffusion within Graphene-Supported Anisotropic ReSe2 Electrodes.

To enhance interlayer lithium diffusion, we engineer electrodes consisting of epitaxially grown ReSe2 nanosheets by chemical vapor deposition, supported on three-dimensional (3D) graphene foam, taking advantage of its weak van der Waals coupling and anisotropic crystal structure. We further demonstrate its excellent performance as the anode for lithium-ion battery and catalyst for hydrogen evolution reaction (HER). Density functional theory calculation reveals that ReSe2 exhibits a low energy barrier for lithium (Li) interlayer diffusion because of negligible interlayer coupling and anisotropic structure with low symmetry that creates additional adsorption sites and leads to a reduced diffusion barrier. Benefitting from these properties, the 3D ReSe2/graphene foam electrode displays excellent cycling and rate performance with 99.6% capacity retention after 350 cycles and a capacity of 327 mA h g-1 at the current density of 1000 mA g-1. Additionally, it has exhibited a high activity for HER, in which an exchange current density of 277.8 µA cm-2 is obtained and only an overpotential of 106 mV is required to achieve a current density of -10 mA cm-2. Our work provides a fundamental understanding of the interlayer diffusion of Li in transition-metal dichalcogenide (TMD) materials and acts as a new tool for designing a TMD-based catalyst.

Selenium Edge as a Selective Anchoring Site for Lithium-Sulfur Batteries with MoSe2/Graphene-Based Cathodes.

For lithium-sulfur batteries (LSBs), the dissolution of lithium polysulfide and the consequent "shuttle effect" remain major obstacles for their practical applications. In this study, we designed a new cathode material comprising MoSe2/graphene to selectively adsorb polysulfides on the selenium edges and thus to mitigate their dissolution. More specifically, few-layered MoSe2 was first grown on nitrogen-doped reduced graphene oxide (N-rGO) using the chemical vapor deposition method and then infiltrated with sulfur as the cathode for LSBs. An initial capacity of 1028 mA h g-1 was achieved for S/MoSe2/N-rGO at 0.2 C, higher than 981 and 405.1 mA h g-1 for pure graphene and sulfur, respectively, along with enhanced cycling durability and rate capability. Moreover, the density functional theory simulation, in addition to the experimental adsorption test, X-ray photoelectron spectroscopy analysis, and transmission electron microscopy technique, reveals the dual roles that MoSe2 plays in improving the performance of LSBs by functioning as the binding sites for lithium polysulfides and as the platform that enables fast Li-ion diffusion by reducing its diffusion barrier. The reported finding suggests that the transition-metal selenides could be an efficient alternative material as the cathode for LSBs.

Methacrylated gelatin-embedded fabrication of 3D graphene-supported Co3O4 nanoparticles for water splitting.

We developed a general platform for the fabrication of transition metal oxide nanoparticles supported by a graphene foam (GF) by first coating it with a methacrylated gelatin (GelMA) hydrogel, which served as a 3D matrix for nanoparticle dispersion. The engineered GelMA/GF matrix was hydrophilic with good mechanical strength and high conductivity, therefore providing a good platform for the dispersion of a variety of metal/oxide precursors. Due to this platform, well-dispersed Co3O4 nanoparticles with the smallest size of 3 nm assembled on the nitrogen-doped graphene foam (Co3O4/NGF). The crystalline transformation from a CoCl2[H2O]2 precursor to Co3O4 was revealed by in operando X-ray diffraction and absorption techniques. After applying Co3O4/NGF as a free-standing electrocatalyst for water splitting, the nanoparticles of size 3 nm exhibited optimal catalytic activity in alkaline media; the corresponding cell could promote water splitting at a current density of 10 mA cm-2 with only 1.63 V and exhibited excellent stability in a 25 h long-term operation. Our results demonstrate that the GelMA hydrogel-coated 3D graphene foam can be a promising platform for the design and fabrication of graphene-based multifunctional materials.

In situ formed nanoparticle-assisted growth of large-size single crystalline h-BN on copper.

h-BN is a widely used ultrathin insulator that can be synthesized in a controllable manner by chemical vapor deposition, similar to the growth of graphene. However, it is challenging to grow large-size single crystalline h-BN because of the ambiguous understanding of its growth mechanism. In this study, we propose a novel in situ formed nanoparticle-assisted growth strategy for large-size single crystalline h-BN growth on conventional polycrystalline copper. We found that the areal nucleation density of h-BN can be suppressed from ∼105 nuclei per mm2 to ∼102 nuclei per mm2 by the in situ formed nanoparticles that were introduced by pre-oxidation. Thus, single crystalline h-BN with lateral length of up to ∼102 µm was readily synthesized. Furthermore, for first time we discovered that the areal nucleation density of h-BN initially decreases and then increases under extreme annealing conditions, indicating that there is a competition-induced limit for suppressing the nucleation of h-BN on copper. This mechanism is universal for h-BN and graphene synthesis, which probably paves the way for large-size graphene/h-BN heterostructures synthesis in the future.

Stacking Modes-Induced Chemical Reactivity Differences on Chemical Vapor Deposition-Grown Trilayer Graphene.

Trilayer graphene (TLG) synthesized by chemical vapor deposition (CVD), in particular the twisted TLG, exhibits sophisticated electronic structures that depend on their stacking modes. Here, we computationally and experimentally demonstrate the chemical reactivity differences of CVD-TLG induced by the stacking modes and corroborated by a photoexcited phenyl-grafting reaction. The experimental results show that the ABA stacking TLGs have the most inert chemical property, yet 30°-30° stacking twisted TLGs are the most active. Further, density functional theory calculations have shown that the chemical reactivity difference can be quantitatively explained by the differences in the number of hot electrons generated in their valence band during irradiation. The activity difference is further verified by the calculated adsorption energy of phenyl on the TLGs. Our work provides insight into the chemistry of TLG and addresses the challenges associated with selective functionalization of TLG with phenyl groups. The understandings developed in this project can also guide the future development of TLG-based functional devices.