Effectiveness of Orthotic Treatment on Clinical Outcomes of the Patients with Adolescent Idiopathic Scoliosis Under Different Wearing Compliance Levels: A Systematic Review.

BACKGROUND: Wearing spinal orthosis for 16 to 23 hours a day during the teenage years could be challenging and stressful for patients with adolescent idiopathic scoliosis (AIS). The investigation of clinical outcomes under various orthosis-wearing compliances can provide helpful insight into orthotic treatment dosage. This systematic review aims to investigate actual orthosis-wearing compliance and evaluate the effectiveness of orthotic treatment in controlling scoliotic curvature and preventing surgery for patients with AIS under various levels of orthosis-wearing compliance. METHODS: A literature search of 7 electronic databases, namely PubMed, MEDLINE, Cochrane Library, Scopus, CINAHL Complete, Web of Science, and Embase, was conducted on May 19, 2023. Participant characteristics, orthotic treatment protocols, compliance information, outcome measures, and key findings were extracted. The Newcastle-Ottawa Scales were used to evaluate the quality of included cohort and case-control studies. RESULTS: This study systematically reviewed 17 of 1,799 identified studies, including 1,981 subjects. The actual compliance was inconsistent and ranged from 7.0 to 18.8 hours daily. The proportion of compliant subjects in each study varied from 16.0% to 78.6% due to the heterogeneity of calculation period, measurement methods, and orthosis prescription time. Thirteen studies were investigated to determine the effectiveness of orthotic treatment in controlling curve deformity under different compliance groups, and 2 studies compared the compliance under different treatment outcomes. The rate of curve progression, defined as surpassing the measurement error threshold of 5° or 6° after orthotic treatment, varied from 1.8% to 91.7% across the studies. Ten studies defined the treatment failure, surgery, or surgery indication as Cobb angle progressing to a certain degree (e.g., 40°, 45°, or 50°) and reported failure/surgery/surgery indication rates ranging from 0.0% to 91.7% among different compliance level groups. CONCLUSION: This review found that the actual compliance with orthotic treatment was generally lower than the prescribed wearing time and exhibited wide variation among different studies. The electronic compliance monitors show promise in regular orthotic treatment practice. More importantly, the group with higher and consistent compliance has significantly less curve progression and lower surgery or failure rate than the group with lower and inconsistent compliance. Further studies are proposed to investigate the minimal orthosis-wearing compliance in patients with AIS treated with different types of orthoses. LEVEL OF EVIDENCE: Level III, Systematic Review. See Instructions for Authors for a complete description of levels of evidence.

Associations between spinal flexibility and bracing outcomes in adolescent idiopathic scoliosis: a literature review.

OBJECTIVES: To identify the existing assessment methods used to measure the spinal flexibility of adolescents with idiopathic scoliosis before bracing and to evaluate the predictive effect of spinal flexibility on bracing outcomes. METHODS: A broad literature search was performed in the PubMed, Web of Science, EMBASE, CINAHL, Scopus, and Cochrane Library databases to obtain relevant information about spinal flexibility and bracing outcomes. All literature was retrieved by October 14, 2023. The inclusion and exclusion criteria were meticulously determined. The quality of each included study and the level of evidence were evaluated by the Quality in Prognosis Studies (QUIPS) method and the Grading of Recommendations, Assessment, Development, and Evaluation (GRADE) system, respectively. RESULTS: After screening 1863 articles retrieved from databases, a total of 14 studies with 2261 subjects were eligible for the final analysis in this review. Overall, nine methods of flexibility assessment were identified, including supine radiographs, supine lateral bending radiographs, lateral bending radiographs but without clear positions, hanging radiographs, fulcrum bending physical method, and ultrasound imaging in the positions of supine, prone, sitting with side bending and prone with side bending. In addition, five studies demonstrated that flexibility had a strong correlation with in-brace correction, and eleven studies illustrated that spinal flexibility was a predictive factor of the bracing outcomes of initial in-brace Cobb angle, initial in-brace correction rate, curve progression, and curve regression. The results of GRADE demonstrated a moderate-evidence rating for the predictive value of spinal flexibility. CONCLUSION: Supine radiography was the most prevalent method for measuring spinal flexibility at the pre-brace stage. Spinal flexibility was strongly correlated with the in-brace Cobb angle or correction rate, and moderate evidence supported that spinal flexibility could predict bracing outcomes.

A feasibility study of application of purpose-design frame and 3-D clinical ultrasound in assessment and design of spinal orthoses for adolescent idiopathic scoliosis.

BACKGROUND: The immediate in-orthosis correction of adolescent idiopathic scoliosis (AIS) is a useful prognostic parameter for the long-term orthotic treatment outcome. The 3-D clinical ultrasound technique is considered a noninvasive alternative to assess scoliotic deformities that could be applied in the orthotic treatment of AIS. OBJECTIVE: This study aimed to investigate the feasibility of a purpose-design assessment frame in estimating biomechanical effects of the controlling pads of a spinal orthosis under the guidance of the ultrasound system. METHODS: Twenty-six subjects with AIS were recruited and arranged to position inside the assessment frame, and controlling pads were applied strategically while the scoliotic deformities were assessed by clinical ultrasound to obtain at least 30% curvature correction, and the body shape was then captured using a computer-aided design and computer-aided manufacture system, and spinal orthoses were subsequently fabricated. The preorthosis and immediate in-orthosis coronal and sagittal X-rays were used for comparison. RESULTS: X-ray assessments showed that the mean coronal Cobb angle and lumbar lordosis of the subjects from the preorthosis to immediate in-orthosis visits decreased significantly ( p < 0.05) from 29.6° to 16.6°, and from 47.2° to 35.3°, respectively. CONCLUSIONS: This feasibility study showed that the proposed method would have a good potential to improve orthotic treatment outcome in a documented approach that should be considered for implementation into routine clinical practice aiming to reduce the chance of deformity deterioration leading to surgical intervention. However, a controlled group study is required to compare the results.

Going below and beyond the surface: Microneedle structure, materials, drugs, fabrication, and applications for wound healing and tissue regeneration.

Microneedle, as a novel drug delivery system, has attracted widespread attention due to its non-invasiveness, painless and simple administration, controllable drug delivery, and diverse cargo loading capacity. Although microneedles are initially designed to penetrate stratum corneum of skin for transdermal drug delivery, they, recently, have been used to promote wound healing and regeneration of diverse tissues and organs and the results are promising. Despite there are reviews about microneedles, few of them focus on wound healing and tissue regeneration. Here, we review the recent advances of microneedles in this field. We first give an overview of microneedle system in terms of its potential cargos (e.g., small molecules, macromolecules, nucleic acids, nanoparticles, extracellular vesicle, cells), structural designs (e.g., multidrug structures, adhesive structures), material selection, and drug release mechanisms. Then we briefly summarize different microneedle fabrication methods, including their advantages and limitations. We finally summarize the recent progress of microneedle-assisted wound healing and tissue regeneration (e.g., skin, cardiac, bone, tendon, ocular, vascular, oral, hair, spinal cord, and uterine tissues). We expect that our article would serve as a guideline for readers to design their microneedle systems according to different applications, including material selection, drug selection, and structure design, for achieving better healing and regeneration efficacy.

Fostering integration among students with different backgrounds using an orthotic community service program.

BACKGROUND: In this globalization era, institutions are developing strategies including international service-learning pedagogies to integrate global perspectives and dimensions into the learning and teaching processes to develop students' capacity in intercultural competence. OBJECTIVE: This study aimed to assess the students' intercultural learning outcome through provision of orthotic community service to the less-privileged children. METHODS: A Hong Kong-based university collaborated with 2 American universities to conduct an orthotic community service program for the children with cerebral palsy in mainland China. In the process of service delivery, the students with different backgrounds worked closely and students' professional knowledge, intercultural understanding, and communication skills were evaluated. A mixed-method approach was adopted to investigate on how this international program could facilitate meaningful interactions in clinical practices. Preprogram and postprogram surveys and focus group interviews were conducted. Statistical analyses were performed on the quantitative data, while interview data were analyzed thematically. RESULTS: A comparison of preprogram and postprogram surveys showed that the students perceived this community service program important for enhancement of their capabilities to communicate with people from other cultures (n = 39, p < 0.05). It also showed an increase in local students' willingness to work with people from other cultures. Some themes related to intercultural competences were identified from the interview: "intercultural awareness, understanding, and communication" as well as openness to work/socialize with people from other cultures." CONCLUSIONS: This study demonstrated that an international community service program could initiate positive changes in students' intercultural communication capability and interest to work with culturally different people.

Effect of different undergarment designs on the compliance and acceptance of the patients with adolescent idiopathic scoliosis under orthotic treatment.

BACKGROUND: Patient's acceptance and compliance to spinal orthosis could influence the outcome of orthotic treatment in adolescent idiopathic scoliosis. Two innovative undergarments (thin and thick designs) were designed to improve the patient's orthosis wearing experience and acceptance. OBJECTIVE: This study aimed to evaluate the effects of patients' self-provided undergarment and 2 newly designed undergarments with respect to the orthosis wearing compliance and quality of life (QoL) measures. METHODS: A prospective randomized-controlled study was conducted to compare the effect of three types of undergarments. Thirty-eight subjects with adolescent idiopathic scoliosis were randomly assigned to one of the three groups: self-provided, thin-design, or thick-design undergarment. Wearing compliance logbook, Scoliosis Research Society questionnaire, and Brace Questionnaire were used to document the orthosis wearing period and quantify the health-related and orthosis-related QoL measures. Kruskal-Wallis one-way analysis of variance (ANOVA) and Friedman two-way ANOVA by ranks tests were conducted for intergroup and intragroup comparisons, respectively. RESULTS: The compliance and QoL domains of the subjects in the thin-design undergarment group were significantly higher than those of the other two undergarment groups (P < .05). The intragroup compliance and QoL scores varied significantly in the 4 visits throughout the study period (P < .05). CONCLUSIONS: It was observed that an adaptation period toward the prescribed spinal orthosis is required to help patients gradually achieve a more stable acceptance. The thin-design undergarment was ranked higher than the other two tested undergarments in compliance and QoL measures.

Compliance study of hip protector users for prevention of fragility fracture: A pilot randomized trial.

BACKGROUND: Hip protectors have been widely used for hip fracture prevention in the elderly, but its efficacy remains controversial. Users' compliance to hip protector is an important factor for its efficacy. However, the assessment of users' compliance tended to be subjective and unreliable in the past. OBJECTIVES: To quantify the elderly's compliance to hip protectors and investigate the effect of different underpant designs on the elderly's compliance. STUDY DESIGN: A pilot randomized trial. METHODS: Thirty-one participants were recruited and provided with hip protectors in which compliance monitors were installed and delivered with three pairs of either the conventional underpants or the purpose-design underpants randomly. Participants were encouraged to use the hip protectors with the assigned underpants for whole day. After 4 weeks, compliance data were downloaded from the compliance monitors. Participants were also asked to fill a survey form for acceptance analysis. The Spearman correlation coefficient and the Wilcoxon signed-rank test/2 independent samples t test/Mann-Whitney U test were used for the corresponding statistical analyses. RESULTS: Thirty-one participants were recruited initially. Eighteen participants were excluded from instrumented compliance analysis because of limited or no data collection. The data of the resting 13 participants (six in the conventional underpants group and seven in purpose-design underpants group) were analyzed and showed an average instrumented compliance of 77.5% which was lower than the average self-reporting compliance (83.3%) of all the available 23 participants (eight of 31 became wheelchair-bounded). Participants' compliance was positively correlated with their acceptance to the hip protectors and significantly higher in the purpose-design underpants group than in the conventional underpants group ( P < 0.05). CONCLUSIONS: This pilot study demonstrated a feasible protocol for compliance quantification of the elderly to the hip protectors, the importance to have an objective compliance measure to assess users' actual compliance, and purpose-design underpants could improve the users' compliance. Future studies with long-term observation and large sample size deserve further proof of the current findings.

Nonoperative management of adolescent idiopathic scoliosis (AIS) using braces.

This review presents the state of the art according to the current evidence on nonoperative treatment for adolescent idiopathic scoliosis, focusing on bracing. The definition of braces for the treatment of adolescent idiopathic scoliosis and a short history are provided. The analysis includes biomechanics, types, existing classifications, indications for treatment, time of brace wear and weaning, adherence, three-dimensional modeling, use of ultrasound imaging for bracing, management of treatment, issue of immediate in-brace correction, and documentation of the outcomes usually assessed for brace treatment, including the quality-of-life issues. According to the current evidence, there are two randomized control trials in favor of bracing. There are insufficient data on the superiority of one brace over another, although it is possible to classify and grade braces for efficacy from nonrigid to rigid and very rigid. Nevertheless, there is consensus on patients' management on the need for teamwork focusing on adherence to treatment, acceptability, and family and patient involvement.

Biomechanical Effects of Thoracolumbosacral Orthosis Design Features on 3D Correction in Adolescent Idiopathic Scoliosis: A Comprehensive Multicenter Study.

STUDY DESIGN: Multicenter numerical study. OBJECTIVE: To biomechanically analyze and compare various passive correction features of braces, designed by several centers with diverse practices, for three-dimensional (3D) correction of adolescent idiopathic scoliosis. SUMMARY OF BACKGROUND DATA: A wide variety of brace designs exist, but their biomechanical effectiveness is not clearly understood. Many studies have reported brace treatment correction potential with various degrees of control, making the objective comparison of correction mechanisms difficult. A Finite Element Model simulating the immediate in-brace corrective effects has been developed and allows to comprehensively assess the biomechanics of different brace designs. METHODS: Expert clinical teams (one orthotist and one orthopedist) from six centers in five countries participated in the study. For six scoliosis cases with different curve types respecting SRS criteria, the teams designed two braces according to their treatment protocol. Finite Element Model simulations were performed to compute immediate in-brace 3D correction and skin-to-brace pressures. All braces were randomized and labeled according to 21 design features derived from Society on Scoliosis Orthopaedic and Rehabilitation Treatment proposed descriptors, including positioning of pressure points, orientation of push vectors, and sagittal design. Simulated in brace 3D corrections were compared for each design feature class using ANOVAs and linear regressions (significance P ≤ 0.05). RESULTS: Seventy-two braces were tested, with significant variety in the design approaches. Pressure points at the apical vertebra level corrected the main thoracic curve better than more caudal locations. Braces with ventral support flattened the lumbar lordosis. Lateral and ventral skin-to-brace pressures were correlated with changes in thoracolumbar/lumbar Cobb and lumbar lordosis (r =- 0.53, r = - 0.54). Upper straps positioned above T10 corrected the main thoracic Cobb better than those placed lower. CONCLUSIONS: The corrective features of various scoliosis braces were objectively compared in a systematic approach with minimal biases and variability in test parameters, providing a better biomechanical understanding of individual passive mechanisms' contribution to 3D correction.

The classification of scoliosis braces developed by SOSORT with SRS, ISPO, and POSNA and approved by ESPRM.

PURPOSE: Studies have shown that bracing is an effective treatment for patients with idiopathic scoliosis. According to the current classification, almost all braces fall in the thoracolumbosacral orthosis (TLSO) category. Consequently, the generalization of scientific results is either impossible or misleading. This study aims to produce a classification of the brace types. METHODS: Four scientific societies (SOSORT, SRS, ISPO, and POSNA) invited all their members to be part of the study. Six level 1 experts developed the initial classifications. At a consensus meeting with 26 other experts and societies' officials, thematic analysis and general discussion allowed to define the classification (minimum 80% agreement). The classification was applied to the braces published in the literature and officially approved by the 4 scientific societies and by ESPRM. RESULTS: The classification is based on the following classificatory items: anatomy (CTLSO, TLSO, LSO), rigidity (very rigid, rigid, elastic), primary corrective plane (frontal, sagittal, transverse, frontal & sagittal, frontal & transverse, sagittal & transverse, three-dimensional), construction-valves (monocot, bivalve, multisegmented), construction-closure (dorsal, lateral, ventral), and primary action (bending, detorsion, elongation, movement, push-up, three points). The experts developed a definition for each item and were able to classify the 15 published braces into nine groups. CONCLUSION: The classification is based on the best current expertise (the lowest level of evidence). Experts recognize that this is the first edition and will change with future understanding and research. The broad application of this classification could have value for brace research, education, clinical practice, and growth in this field.

Pain issues in the victims with lower-limb amputation: 10 years after the 2008 Sichuan earthquake.

PURPOSE: To study the prevalence, intensity, and bothersomeness of amputation-related pain and further to identify the potential risk factors in the victims with lower-limb amputation 10 years after the 2008 Sichuan earthquake. METHODS: In the cross-sectional study, 66 victims with lower-limb amputation were recruited. The Prostheses Evaluation Questionnaire was used to document the prevalence, intensity, and bothersomeness of amputation-related pain. The bivariate relationships between amputation-related pain and each of demographic characteristics were analyzed. RESULTS: Majority of the enrolled lower-limb amputees (90.9%) reported to have one or more types of amputation-related pain. The intensity and bothersomeness of amputation-related pain were considered as severe in nearly 40% of these post-earthquake victims. The potential demographic risk factors associated with the prevalence, intensity, and bothersomeness of amputation-related pain were identified, including the age, lower level of education, marital status, employment, and comorbidity. CONCLUSIONS: The pain coming from phantom limb, residual limb, non-amputated limb, and back was found persistent in the lower-limb amputees 10 years after the 2008 Sichuan earthquake. The findings of this study could provide useful reference for optimization of post-disaster rehabilitation strategies to alleviate chronic pain in the victims following lower-limb amputation.Implications for RehabilitationThe pain coming from phantom limb, residual limb, non-amputated limb, and back was found persistent in the victims with lower-limb amputation 10 years after the 2008 Sichuan earthquake.Continuous post-earthquake assessment and management of amputation-related pain should be taken into consideration for the victims with lower-limb amputation.The comorbidity should be effectively and efficiently controlled for the victims with lower-limb amputation due to its association with the intensity and bothersomeness of amputation-related pain.

A Randomized Controlled Trial to Evaluate the Clinical Effectiveness of 3D-Printed Orthosis in the Management of Adolescent Idiopathic Scoliosis.

STUDY DESIGN: Prospective randomized controlled trial. OBJECTIVE: To compare clinical effectiveness and quality of life (QoL) of the 3D-printed orthosis (3O) and conventional orthosis (CO) for adolescent idiopathic scoliosis (AIS). SUMMARY OF BACKGROUND DATA: Using 3D printing technology to design and fabricate orthoses to manage AIS aiming to improve in-orthosis correction and patients' compliance that are considered essential factors of effective treatment. Clinical evaluation was conducted to study the effectiveness of this innovative method. METHODS: Thirty females with AIS who met the criteria (age 10-14, Cobb 20-40°, Risser sign 0-2, ≤12 months after menarche) were recruited. Subjects were randomly allocated to the 3O group (n = 15, age 12.4, Cobb 31.8°) and CO group (n = 15, age 12.0, Cobb 29.3°). All patients were prescribed for full-time wearing (23 hours/d) and follow-up every 4 to 6 months until bone maturity. Compliance was monitored by thermosensors, while QoL was assessed using three validated questionnaires. RESULTS: Comparable immediate in-orthosis correction was observed between 3O (-11.6°, P < 0.001) and CO groups (-12.9°, P < 0.001). In the QoL study via SRS-22r, the 3O group got worse results after 3 months in aspects of function, self-image, and mental health (-0.5, -0.6, -0.7, P < 0.05) while the CO group had worse results in aspects of self-image and mental health (-0.3, -0.3, P < 0.05). No significant difference was found in QoL assessments between groups. After 2 years of follow-up, 22 patients were analyzed with 4 dropouts in each group. Comparable angle reduction was observed in both groups (3O: -2.2°, P = 0.364; CO: -3.5°, P = 0.193). There was one subject (9.1%) in the 3O group while two subjects (18.2%) in the CO group had curve progression >5°. Daily wearing hours were 1.9 hours longer in the 3O group than the CO group (17.1 vs. 15.2 hours, P = 0.934). CONCLUSION: The 3O group could provide comparable clinical effects as compared with the CO group while patients with 3O showed similar compliance and QoL compared to those with CO.Level of Evidence: 1.

Quality of Life in Lower-Limb Amputees 10 Years After the 2008 Sichuan Earthquake: A Cross-Sectional Study.

OBJECTIVE: The aim of this study was to investigate the long-term outcome of quality of life (QOL) in the lower-limb amputees 10 years after the 2008 Sichuan earthquake. METHODS: In the cross-sectional study, 66 lower-limb amputees were recruited. The prosthetics-related QOL was assessed using the Prosthetic Evaluation Questionnaire (PEQ) in terms of the scales of utility, appearance, sounds, residual limb health, perceived response, frustration, social burden, ambulation, and well-being. The score of each PEQ subscale was calculated and compared among the cohorts with different demographic characteristics. RESULTS: The PEQ scores showed that the scales of sounds, residual limb health, and frustration were still low in the lower-limb amputees 10 years after the 2008 Sichuan earthquake. The comparison of PEQ scales among cohorts with different demographic characteristics indicated that the potential demographic risk factors, namely, age, marital status, educational level, living independence, and comorbidity, were associated with prosthesis-related QOL. CONCLUSIONS: The prosthesis-related QOL of the lower-limb amputees 10 years after the 2008 Sichuan earthquake has been partly documented in this study. The potential demographic risk factors associated with QOL of amputees were also identified. These findings could enhance the understanding of prosthesis-related QOL of lower-limb amputees sustained in an earthquake and facilitate the optimization of post-disaster rehabilitation strategies.

Estimation of plane of maximum curvature for the patients with adolescent idiopathic scoliosis via a purpose-design computational method.

PURPOSE: The coronal Cobb angle is commonly used for assessing the adolescent idiopathic scoliosis (AIS); however, it may underestimate the severity of AIS while the plane of maximum curvature (PMC) could be a promising descriptor for three-dimensional assessment of AIS. This study aimed to develop a computational method (CM) for estimating the PMC based on the coronal and sagittal images of the spine, and to verify the results with computed tomography (CT). METHODS: Twenty-eight thoracic and 24 lumbar curves from 30 subjects with AIS were analysed. For the CM, PMC was estimated via identifying the two corner points at the superior endplate of upper-end vertebra and the inferior endplate of lower-end vertebra in the coronal and sagittal CT images separately (eight corner points in total). For the CT, PMC was determined through rotating the spine images axially until the maximum Cobb angle was found. Intraclass correlation coefficient (ICC), Bland-Altman method and linear regression analysis were used for the statistical analyses. RESULTS: The high ICC values (intra- > 0.91; inter- > 0.84) suggested very good intra- and inter-rater reliability of the CM in PMC estimation. The high ICC values (> 0.91) and assessment of Bland-Altman method demonstrated a good agreement between the PMC acquired using the CM and CT. The generated linear regression equations (R2 > 0.69) could allow to estimate the PMC (originally measured through the CT) via the CM. CONCLUSION: The developed computational method could estimate reliable and valid PMC for the patients with AIS, and become feasible for three-dimensional assessment of AIS. LEVEL OF EVIDENCE: III.

Assessment of the plane of maximum curvature for patients with adolescent idiopathic scoliosis via computed tomography.

BACKGROUND: In the assessment of three-dimensional features of adolescent idiopathic scoliosis, the plane of maximum curvature was compared with the coronal Cobb angle. OBJECTIVES: To investigate the intrarater reliability, variability, and difference of the prone plane of maximum curvature measurements taken from computed tomography using the constrained and unconstrained Cobb methods; to assess the difference and correlation between the prone plane of maximum curvature measurements obtained using the constrained and unconstrained Cobb methods; and to examine differences and correlation between the prone plane of maximum curvature Cobb angle and coronal Cobb angle measurements. STUDY DESIGN: Retrospective study. METHODS: Records of 29 subjects with adolescent idiopathic scoliosis aged 15.8 ± 3.5 years were reviewed (25 thoracic and 24 thoracolumbar/lumbar curves). An experienced rater measured the plane of maximum curvature using the constrained and unconstrained Cobb methods, and the coronal Cobb angles using the conventional Cobb method on computed tomography images 3 times each with 1-week interval. The intraclass correlation coefficient (2,1), Pearson correlation coefficient (r), one-way repeated measures analysis of variance, and paired t test were applied for various analyses. RESULTS: The intraclass correlation coefficients for all intrarater reliability assessments were greater than 0.87. The plane of maximum curvature measurements of the two Cobb methods were excellently correlated (r ⩾ 0.97) with no significant difference (P > 0.05). The mean plane of maximum curvature Cobb angle was moderately correlated with (r > 0.72) but significantly greater (P < 0.001) than the mean coronal Cobb angle. CONCLUSION: The plane of maximum curvature measurements obtained from computed tomography were found to be reliable while the plane of maximum curvature measurements of the two Cobb methods were comparable. The mean plane of maximum curvature Cobb angle was moderately correlated with but significantly greater than the mean coronal Cobb angle. CLINICAL RELEVANCE: The plane of maximum curvature measurements taken from computed tomography was found to be reliable, hence it could be used as a supplement to the coronal Cobb angle in the assessment and management of adolescent idiopathic scoliosis. With technological advancement, the radiation dose of computed tomography can be further reduced to a safer level for a broader range of cases.

The Intelligent Automated Pressure-Adjustable Orthosis for Patients With Adolescent Idiopathic Scoliosis: A Bi-Center Randomized Controlled Trial.

STUDY DESIGN: Randomized controlled trial. OBJECTIVE: To compare the effectiveness of the automated pressure-adjustable orthosis (PO) and conventional orthosis (CO) for treatment of adolescent idiopathic scoliosis (AIS). SUMMARY OF BACKGROUND DATA: Orthosis wearing quality may influence its effectiveness for AIS. An automated PO aimed to provide a more optimized and consistent biomechanical environment. Clinical evaluation was conducted to study the effectiveness of this innovative orthosis. METHODS: Patients with AIS who met the criteria (Age 10-14, Cobb 20°-40°, and Risser sign 0-2) were recruited from two clinics and randomly assigned to the PO and CO groups. Compliance sensors were embedded in both groups, while the PO group was set to adjust the interfacial pressure as prescribed automatically. Clinical assessments (radiology and quality of life, QoL) were conducted at the baseline, immediate after orthosis fitting and 1-year follow-up. Orthosis wearing compliance was tracked using thermo and pressure sensors. RESULTS: Twenty-four patients were enrolled with one drop-out (PO, n = 11; CO, n = 12). Significant immediate in-orthosis correction was observed in the PO (11.0°â€Š±â€Š6.5°, 42.0%, P < 0.001) and CO (10.3°â€Š±â€Š5.3°, 37.6%, P < 0.001) groups. After 1 year, no patient with PO progressed while two with CO had progression more than 5°. The mean daily wearing duration was 1.1 hours longer in the PO group as compared with the CO group (15.4 ±â€Š4.5 vs. 14.3 ±â€Š3.8 h). Moreover, the wearing quality within the targeted pressure was 33.9% higher in the PO group (56.5 ±â€Š16.5% vs. 23.1 ±â€Š12.1%, P < 0.001). No significant difference in the QoL results was observed between two groups nor within both groups during the study period. CONCLUSION: This study showed that the automated PO could enhance wearing quality when compared with the CO, thus offering a better biomechanical corrective effect in the study period without adverse effect on the patients' wearing quantity and QoL. LEVEL OF EVIDENCE: 1.

Reliability and validity of lateral curvature assessments using clinical ultrasound for the patients with scoliosis: a systematic review.

PURPOSE: Clinical ultrasound is radiation-free, low cost and user friendly, which makes it probable in assessment of scoliosis. Numerous studies have been conducted about the feasibility of using clinical ultrasound to assess scoliosis; thus, an inclusive review of the literature would be beneficial for researchers, clinicians and patients. This study aimed to systematically review the reliability and validity of coronal curvature assessments obtained from different clinical ultrasound imaging methods. METHODS: A comprehensive search of 6 databases and Google Scholar search engine was performed for retrieving articles assessing reliability and/or validity of spinal curvature measurements obtained from clinical ultrasound. Two reviewers assessed the methodological quality of selected articles independently using criteria appraisal instrument. The results were analysed and synthesized qualitatively using level of evidence method. RESULTS: Fourteen articles were included. Thirteen articles investigated both the reliability and validity, of which nine were of high quality; and one article evaluated only the reliability and was of high quality. Totally five ultrasound methods were evaluated. Very high reliability (intra-class correlation coefficient = 0.80-1.00) but limited levels of evidence were found for the majority of the studied ultrasound methods. Almost all the methods showed good to excellent validity (correlation coefficient = 0.76-1.00) but limited to moderate levels of evidence. CONCLUSION: A high level of evidence was found in support of the reliability and validity of the COL (centre of lamina) ultrasound method. Further reliability and validity studies should be conducted to strengthen the level of evidence for those ultrasound methods with moderate, limited or conflicting level of evidence. These slides can be retrieved under Electronic Supplementary Material.

Effect of Kinesio taping on electromyographic activity of leg muscles during gait in children with developmental coordination disorder: A randomized controlled trial.

OBJECTIVE: This study aimed to evaluate the effectiveness of Kinesio tape (KT) on lower limb muscle activation pattern in children with developmental coordination disorder (DCD) during walking. DESIGN: A parallel-group randomized controlled trial. SETTING: University laboratory setting. PARTICIPANTS: Twenty-five children with DCD were randomly allocated to the KT group (mean age = 7.97 years) and 24 to the control group (mean age = 8.04 years). INTERVENTION: KT group received KT application to the quadriceps and gastrocnemius muscles whereas the control group received no intervention. MEASUREMENTS: Peak muscle activation (in percentage of maximal voluntary isometric contraction [%MVIC]) in the lower limbs during gait was measured by means of surface electromyography, electrogoniometry, and foot contact switches. RESULTS: Gastrocnemius medialis activation during mid stance (23.46%MVIC, 95% CI = -32.53, -14.39) and late stance phases (3.25%MVIC, 95% CI = -5.67, -0.81) of gait increased after the application of KT in the KT group compared to baseline values. The KT group demonstrated 26.87%MVIC (95% CI = 26.87, 7.11) higher gastrocnemius medialis muscle peak activation during mid stance phase at post-test when compared with the control group. Moreover, gastrocnemius medialis and biceps femoris muscle peak activation during loading response decreased by 8.36%MVIC (95% CI = 2.71, 14.02) and 3.54%MVIC (95% CI = 1.08, 6.01), respectively, in the control group overtime. CONCLUSIONS: The application of KT on children with DCD had an increased gastrocnemius medialis muscle activation during stance phase. KT could be incorporated into gait re-education programmes to facilitate muscle contraction in these children.

Significance of recumbent curvature in prediction of in-orthosis correction for adolescent idiopathic scoliosis.

BACKGROUND:: Prediction of in-orthosis curvature at pre-orthosis stage is valuable for the treatment planning for adolescent idiopathic scoliosis, while the position of spinal curvature assessment that is effective for this prediction is still unknown. OBJECTIVES:: To compare the spinal curvatures in different body positions for predicting the spinal curvature rendered by orthosis. STUDY DESIGN:: A prospective cohort study. METHODS:: Twenty-two patients with adolescent idiopathic scoliosis (mean Cobb angle: 28.1°± 7.3°) underwent ultrasound assessment of spinal curvature in five positions (standing, supine, prone, sitting bending, prone bending positions) and that within orthosis. Differences and correlations were analyzed between the spinal curvatures in the five positions and that within orthosis. RESULTS:: The mean in-orthosis curvature was 11.2° while the mean curvatures in five studied positions were 18.7° (standing), 10.7° (supine), 10.7° (prone), -3.5° (prone bending), and -6.5° (sitting bending). The correlation coefficients of the in-orthosis curvature and that in five studied positions were r = 0.65 (standing), r = 0.76 (supine), r = 0.87 (prone), r = 0.41 (prone bending), and r = 0.36 (sitting bending). CONCLUSION:: The curvature in recumbent positions (supine and prone) is highly correlated to the initial in-orthosis curvature without significant difference. Thus, the initial effect of spinal orthosis could be predicted by the curvature in the recumbent positions (especially prone position) at the pre-orthosis stage. CLINICAL RELEVANCE: Prediction of in-orthosis correction at pre-orthosis stage is valuable for spinal orthosis design. This study suggests assessing the spinal curvature in recumbent position (especially prone position) to predict the initial in-orthosis correction for optimizing the orthosis design.