Bridging Electrochemistry and Ultrahigh Vacuum: "Unburying" the Electrode-Electrolyte Interface.

ConspectusElectrochemistry has a central role in addressing the societal issues of our time, including the United Nations' Sustainable Development Goals (SDGs) and beyond. At a more basic level, however, elucidating the nature of electrode-electrolyte interfaces is an ongoing challenge due to many reasons, but one obvious reason is the fact that the electrode-electrolyte interface is buried by a thick liquid electrolyte layer. This fact would seem to preclude, by default, the use of many traditional characterization techniques in ultrahigh vacuum surface science due to their incompatibility with liquids. However, combined UHV-EC (ultrahigh vacuum-electrochemistry) approaches are an active area of research and provide a means of bridging the liquid environment of electrochemistry to UHV-based techniques. In short, UHV-EC approaches are able to remove the bulk electrolyte layer by performing electrochemistry in the liquid environment of electrochemistry followed by sample removal (referred to as emersion), evacuation, and then transfer into vacuum for analysis.Through this Account, we highlight our group's activities using UHV-EC to bridge electrochemistry with UHV-based X-ray and ultraviolet photoelectron spectroscopy (XPS/UPS) and scanning tunneling microscopy (STM). We provide a background and overview of the UHV-EC setup, and through illustrative examples, we convey what sorts of insights and information can be obtained. One notable advance is the use of ferrocene-terminated self-assembled monolayers as a spectroscopic molecular probe, allowing the electrochemical response to be correlated with the potential-dependent electronic and chemical state of the electrode-monolayer-electrolyte interfacial region. With XPS/UPS, we have been able to probe changes in the oxidation state, valence structure, and also the so-called potential drop across the interfacial region. In related work, we have also spectroscopically probed changes in the surface composition and screening of the surface charge of oxygen-terminated boron-doped diamond electrodes emersed from high-pH solutions. Finally, we will give readers a glimpse into our recent progress regarding real-space visualizations of electrodes following electrochemistry and emersion using UHV-based STM. We begin by demonstrating the ability to visualize large-scale morphology changes, including electrochemically induced graphite exfoliation and the surface reconstruction of Au surfaces. Taking this further, we show that in certain instances atomically resolved specifically adsorbed anions on metal electrodes can be imaged. In all, we anticipate that this Account will stimulate readers to advance UHV-EC approaches further, as there is a need to improve our understanding concerning the guidelines that determine applicable electrochemical systems and how to exploit promising extensions to other UHV methods.

Monatomic Iodine Dielectric Layer for Multimodal Optical Spectroscopy of Dye Molecules on Metal Surfaces.

Fluorescence and Raman scattering spectroscopies have been used in various research fields such as chemistry, electrochemistry, and biochemistry because they can easily obtain detailed information about molecules at interfaces with visible light. In particular, multimodal fluorescence and Raman scattering spectroscopy have recently attracted significant attention, which enables us to distinguish chemical species and their electronic states that are important for expressing various functions. However, a special strategy is required to perform simultaneous measurements because the cross sections of fluorescence and Raman scattering differ by as much as ∼1014. In this study, we propose a method for the simultaneous measurement of dye molecules on a metal surface using a monatomic layer of iodine as the dielectric layer. The method is based on adequately quenching the photoexcited state of the molecules near the metal surface to weaken the fluorescence intensity and using the resonance effect to increase the Raman signal. We have validated this concept by experiments with insulating layers of different thicknesses and dye molecules of different chemical structures. The proposed multimodal strategy paves the way for various applications such as catalytic chemistry and electrochemistry, where the adsorption structure and electronic states of molecular species near the metal surface determine functionalities.

Probing consequences of anion-dictated electrochemistry on the electrode/monolayer/electrolyte interfacial properties.

Altering electrochemical interfaces by using electrolyte effects or so-called "electrolyte engineering" provides a versatile means to modulate the electrochemical response. However, the long-standing challenge is going "beyond cyclic voltammetry" where electrolyte effects are interrogated from the standpoint of the interfacial properties of the electrode/electrolyte interface. Here, we employ ferrocene-terminated self-assembled monolayers as a molecular probe and investigate how the anion-dictated electrochemical responses are translated in terms of the electronic and structural properties of the electrode/monolayer/electrolyte interface. We utilise a photoelectron-based spectroelectrochemical approach that is capable of capturing "snapshots" into (1) anion dependencies of the ferrocene/ferrocenium (Fc/Fc+) redox process including ion-pairing with counter anions (Fc+-anion) caused by differences in Fc+-anion interactions and steric constraints, and (2) interfacial energetics concerning the electrostatic potential across the electrode/monolayer/electrolyte interface. Our work can be extended to provide electrolyte-related structure-property relationships in redox-active polymers and functionalised electrodes for pseudocapacitive energy storage.

Unusual Electrochemical Properties of Low-Doped Boron-Doped Diamond Electrodes Containing sp2 Carbon.

Unexpected phenomena displayed by low-boron-doped diamond (BDD) electrodes are disclosed in the present work. Generally, the presence of sp2 nondiamond carbon impurities in BDD electrodes causes undesirable electrochemical properties, such as a reduced potential window and increased background current, etc. However, we found that the potential window and redox reaction in normally doped (1%) BDD and low-doped (0.1%) BDD exhibited opposite tendencies depending on the extent of sp2 carbon. Moreover, we found that contrary to the usual expectations, low-doped BDD containing sp2 carbon hinders electron transfer, whereas in line with expectations, normally doped BDD containing sp2 exhibits enhanced electron transfer. Surface analyses by X-ray/ultraviolet photoelectron spectroscopy (XPS/UPS) and electrochemical methods are utilized to explain these unusual phenomena. This work indicates that the electrochemical properties of low-doped BDD containing sp2 might be due partially to the high level of surface oxygen, the large work function, the low carrier density, and the existence of different types of sp2 carbon.

In Situ Spectroscopic Study on the Surface Hydroxylation of Diamond Electrodes.

Carbon-based materials are regarded as an environmentally benign alternative to the conventional metal electrode used in electrochemistry from the viewpoint of sustainable chemistry. Among various carbon electrode materials, boron-doped diamond (BDD) exhibits superior electrochemical properties. However, it is still uncertain how surface chemical species of BDD influence the electrochemical performance, because of the difficulty in characterizing the surface species. Here, we have developed in situ spectroscopic measurement systems on BDD electrodes, i.e., in situ attenuated total reflection infrared spectroscopy (ATR-IR) and electrochemical X-ray photoelectron spectroscopy (EC-XPS). ATR-IR studies at a controlled electrode potential confirmed selective surface hydroxylation. EC-XPS studies confirmed deprotonation of C-OH groups at the BDD/electrolyte interface. These findings should be important not only for better understanding of BDD's fundamentals but also for a variety of applications.

Discerning the Redox-Dependent Electronic and Interfacial Structures in Electroactive Self-Assembled Monolayers.

We explore the redox-dependent electronic and structural changes of ferrocene-terminated self-assembled monolayers (Fc SAMs) immersed in aqueous solution. By exploiting X-ray and ultraviolet photoelectron spectroscopy combined with an electrochemical cell (EC-XPS/UPS), we can electrochemically control the Fc SAMs and spectroscopically probe the induced changes with the ferrocene/ferrocenium (Fc/Fc+) redox center (Fe oxidation state), formation of 1:1 Fc+-ClO4- ion pairs, molecular orientation, and monolayer thickness. We further find the insignificant involvement of interfacial water in the Fc SAMs irrespective of redox state. Electrolyte dependencies could be identified with 0.1 M NaClO4 and HClO4 when probing partially oxidized Fc/Fc+ SAMs. Corroborating the occurrence of electrochemically induced oxidation, EC-UPS shows that oxidation to Fc+ is accompanied by a shift of the highest occupied molecular orbital toward higher binding energy. The oxidation to Fc+ is also met with an increase in work function ascribed to the induced negative interfacial dipole caused by the presence of Fc+-ClO4- ion pairs along with a contribution from the reorientation of the Fc+ SAMs. The reversibility of our observations is confirmed upon conversion from Fc+ back to the neutral Fc. The approach shown here is beneficial for a broad range of redox-responsive systems to aid in the elucidation of structure-function relationships.

Determining the Facile Routes for Oxygen Evolution Reaction by In Situ Probing of Li-O2 Cells with Conformal Li2O2 Films.

An ongoing challenge with lithium-oxygen (Li-O2) batteries is in deciphering the oxygen evolution reaction (OER) process related to the slow decomposition of the insulating lithium peroxide (Li2O2). Herein, we shed light on the behavior of Li2O2 oxidation by exploiting various in situ imaging, gas analysis, and electrochemical methods. At the low potentials 3.2-3.7 V (vs Li/Li+), OER is exclusive to the thinner parts of the Li2O2 deposits, which leads to O2 gas evolution, followed by the concomitant release of superoxide species. At higher potentials, OER initiates at the sidewalls of the thicker Li2O2. The succeeding lateral decomposition of Li2O2 indicates the preferential Li+ and charge transport occurring at the sidewalls of Li2O2. To ameliorate the OER rate, we also investigate an alternative approach of rerouting charge carriers by using soluble redox mediators. Our in situ probes provide insights into the favorable charge-transport routes that can aid in promoting Li2O2 decomposition.

Nanostructuring one-dimensional and amorphous lithium peroxide for high round-trip efficiency in lithium-oxygen batteries.

The major challenge facing lithium-oxygen batteries is the insulating and bulk lithium peroxide discharge product, which causes sluggish decomposition and increasing overpotential during recharge. Here, we demonstrate an improved round-trip efficiency of ~80% by means of a mesoporous carbon electrode, which directs the growth of one-dimensional and amorphous lithium peroxide. Morphologically, the one-dimensional nanostructures with small volume and high surface show improved charge transport and promote delithiation (lithium ion dissolution) during recharge and thus plays a critical role in the facile decomposition of lithium peroxide. Thermodynamically, density functional calculations reveal that disordered geometric arrangements of the surface atoms in the amorphous structure lead to weaker binding of the key reaction intermediate lithium superoxide, yielding smaller oxygen reduction and evolution overpotentials compared to the crystalline surface. This study suggests a strategy to enhance the decomposition rate of lithium peroxide by exploiting the size and shape of one-dimensional nanostructured lithium peroxide.

Unexpected Li2O2 Film Growth on Carbon Nanotube Electrodes with CeO2 Nanoparticles in Li-O2 Batteries.

In lithium-oxygen (Li-O2) batteries, it is believed that lithium peroxide (Li2O2) electrochemically forms thin films with thicknesses less than 10 nm resulting in capacity restrictions due to limitations in charge transport. Here we show unexpected Li2O2 film growth with thicknesses of ∼60 nm on a three-dimensional carbon nanotube (CNT) electrode incorporated with cerium dioxide (ceria) nanoparticles (CeO2 NPs). The CeO2 NPs favor Li2O2 surface nucleation owing to their strong binding toward reactive oxygen species (e.g., O2 and LiO2). The subsequent film growth results in thicknesses of ∼40 nm (at cutoff potential of 2.2 V vs Li/Li(+)), which further increases up to ∼60 nm with the addition of trace amounts of H2O that enhances the solution free energy. This suggests the involvement of solvated superoxide species (LiO2(sol)) that precipitates on the existing Li2O2 films to form thicker films via disproportionation. By comparing toroidal Li2O2 formed solely from LiO2(sol), the thick Li2O2 films formed from surface-mediated nucleation/thin-film growth following by LiO2(sol) deposition provides the benefits of higher reversibility and rapid surface decomposition during recharge.

A structured three-dimensional polymer electrolyte with enlarged active reaction zone for Li-O2 batteries.

The application of conventional solid polymer electrolyte (SPE) to lithium-oxygen (Li-O2) batteries has suffered from a limited active reaction zone due to thick SPE and subsequent lack of O2 gas diffusion route in the positive electrode. Here we present a new design for a three-dimensional (3-D) SPE structure, incorporating a carbon nanotube (CNT) electrode, adapted for a gas-based energy storage system. The void spaces in the porous CNT/SPE film allow an increased depth of diffusion of O2 gas, providing an enlarged active reaction zone where Li(+) ions, O2 gas, and electrons can interact. Furthermore, the thin SPE layer along the CNT, forming the core/shell nanostructure, aids in the smooth electron transfer when O2 gas approaches the CNT surface. Therefore, the 3-D CNT/SPE electrode structure enhances the capacity in the SPE-based Li-O2 cell. However, intrinsic instability of poly(ethylene oxide) (PEO) of the SPE matrix to superoxide (O2(·-)) and high voltage gives rise to severe side reactions, convincing us of the need for development of a more stable electrolyte for use in this CNT/SPE design.