Best Practices for Conducting Physical Reconstructions of Head Impacts in Sport.

Physical reconstructions are a valuable methodology for quantifying head kinematics in sports impacts. By recreating the motion of human heads observed in video using instrumented test dummies in a laboratory, physical reconstructions allow for in-depth study of real-world head impacts using well-established surrogates such as the Hybrid III crash test dummy. The purpose of this paper is to review all aspects of the physical reconstruction methodology and discuss the advantages and limitations associated with different choices in case selection, study design, test surrogate, test apparatus, text matrix, instrumentation, and data processing. Physical reconstructions require significant resources to perform and are therefore typically limited to small sample sizes and a case series or case-control study design. Their accuracy may also be limited by a lack of dummy biofidelity. The accuracy, repeatability, and sensitivity of the reconstruction process can be characterized and improved by good laboratory practices and iterative testing. Because wearable sensors have their own limitations and are not available or practical for many sports, physical reconstructions will continue to provide a useful and complementary approach to measuring head acceleration in sport for the foreseeable future.

Analysis and comparison of lateral head impacts using various golf discs and a Hybrid III head form.

The potential for head injuries from discs specifically designed for the sport of disc golf has increased as more disc golf courses are constructed in municipal parks where there is an inherent risk to park users of being struck by a golf disc. This study investigated the potential for head injury of various golf discs used in the sport of disc golf at 18 m/s (40 mph) and 27 m/s (60 mph) using a Hybrid III head form. A matrix of eight modern golf discs were tested to determine if velocity, mass, disc type, or flexibility has a significant effect on the potential for head injury as indicated by peak linear acceleration, peak angular acceleration, Head Injury Criteria (HIC) and Severity Index (SI) values. Regression analyses indicated peak linear acceleration, peak rotational acceleration, HIC, and SI varied by velocity, mass, type, and flexibility. The highest mean linear and rotational acceleration results, 38.5 g and 2512 rad/s2 respectively, both associated with a less than 10% likelihood of sustaining a concussion. The findings should be of interest to both researchers and practitioners who seek to balance use and safety of public parks.

Development and Evaluation of a Test Method for Assessing the Performance of American Football Helmets.

As more is learned about injury mechanisms of concussion and scenarios under which injuries are sustained in football games, methods used to evaluate protective equipment must adapt. A combination of video review, videogrammetry, and laboratory reconstructions was used to characterize concussive impacts from National Football League games during the 2015-2017 seasons. Test conditions were generated based upon impact locations and speeds from this data set, and a method for scoring overall helmet performance was created. Head kinematics generated using a linear impactor and sliding table fixture were comparable to those from laboratory reconstructions of concussive impacts at similar impact conditions. Impact tests were performed on 36 football helmet models at two laboratories to evaluate the reproducibility of results from the resulting test protocol. Head acceleration response metric, a head impact severity metric, varied 2.9-5.6% for helmet impacts in the same lab, and 3.8-6.0% for tests performed in a separate lab when averaged by location for the models tested. Overall inter-lab helmet performance varied by 1.1 ± 0.9%, while the standard deviation in helmet performance score was 7.0%. The worst helmet performance score was 33% greater than the score of the best-performing helmet evaluated by this study.

An integrated helmet and neck support (iHANS) for racing car drivers: a biomechanical feasibility study.

A new form of head and neck protection for racing car drivers is examined. The concept is one whereby the helmet portion of the system is attached, by way of a quick release clamp, to a collar-like platform which is supported on the driver's shoulders. The collar, which encircles the back and sides of the driver's neck, is held in place by way of the on-board restraint belts. The interior of the helmet portion of the assembly is large enough to provide adequate volitional head motion. The overall objective of the design is to remove the helmet from the wearer's head and thereby to mitigate the deleterious features of helmet wearing such as neck fatigue, poor ventilation and aerodynamic buffeting. Just as importantly, by transferring the weight of the helmet and all attendant reaction forces associated with inertial and impact loads to the shoulder complex (instead of to the neck), reduced head and neck injury probability should be achievable. This paper describes the concept development and the evolution of various prototype designs. Prototypes have been evaluated on track and sled tested in accordance with contemporary head neck restraint systems practice. Also discussed is a series of direct impact tests. In addition, low mass high velocity ballistic tests have been conducted and are reviewed herein. It is concluded that this new concept indeed does address most of the drawbacks of the customary helmet and that it generally can reduce the probability of head and neck injury.

Football helmet drop tests on different fields using an instrumented Hybrid III head.

An instrumented Hybrid III head was placed in a Schutt ION 4D football helmet and dropped on different turfs to study field types and temperature on head responses. The head was dropped 0.91 and 1.83 m giving impacts of 4.2 and 6.0 m/s on nine different football fields (natural, Astroplay, Fieldturf, or Gameday turfs) at turf temperatures of -2.7 to 23.9 °C. Six repeat tests were conducted for each surface at 0.3 m (1') intervals. The Hybrid III was instrumented with triaxial accelerometers to determine head responses for the different playing surfaces. For the 0.91-m drops, peak head acceleration varied from 63.3 to 117.1 g and HIC(15) from 195 to 478 with the different playing surfaces. The lowest response was with Astroplay, followed by the engineered natural turf. Gameday and Fieldturf involved higher responses. The differences between surfaces decreased in the 1.83 m tests. The cold weather testing involved higher accelerations, HIC(15) and delta V for each surface. The helmet drop test used in this study provides a simple and convenient means of evaluating the compliance and energy absorption of football playing surfaces. The type and temperature of the playing surface influence head responses.

Effect of mouthguards on head responses and mandible forces in football helmet impacts.

The potential for mouthguards to change the risk of concussion was studied in football helmet impacts. The Hybrid III head was modified with an articulating mandible, dentition, and compliant temporomandibular joints (TMJ). It was instrumented for triaxial head acceleration and triaxial force at the TMJs and upper dentition. Mandible force and displacement were validated against cadaver impacts to the chin. In phase 1, one of five mouthguards significantly lowered HIC in 6.7 m/s impacts (p = 0.025) from the no mouthguard condition but not in 9.5 m/s tests. In phase 2, eight mouthguards increased HIC from +1 to +17% in facemask impacts that loaded the chinstraps and mandible; one was statistically higher (p = 0.018). Peak head acceleration was +1 to +15% higher with six mouthguards and 2-3% lower with two others. The differences were not statistically significant. Five of eight mouthguards significantly reduced forces on the upper dentition by 40.8-63.9%. Mouthguards tested in this study with the Hybrid III articulating mandible lowered forces on the dentition and TMJ, but generally did not influence HIC or concussion risks.