Ultrasound-based jawbone surface quality evaluation after alveolar ridge preservation.

BACKGROUND: Bone readiness for implant placement is typically evaluated by bone quality/density on 2-dimensional radiographs and cone beam computed tomography at an arbitrary time between 3 and 6 months after tooth extraction and alveolar ridge preservation (ARP). The aim of this study is to investigate if high-frequency ultrasound (US) can classify bone readiness in humans, using micro-CT as a reference standard to obtain bone mineral density (BMD) and bone volume fraction (BVTV) of healed sockets receiving ARP in humans. METHODS: A total of 27 bone cores were harvested during the implant surgery from 24 patients who received prior extraction with ARP. US images were taken immediately before the implant surgery at a site co-registered with the tissue biopsy collection location, made possible with a specially designed guide, and then classified into 3 tiers using B-mode image criteria (1) favorable, (2) questionable, and (3) unfavorable. Bone mineral density (hydroxyapatite) and BVTV were obtained from micro-CT as the gold standard. RESULTS: Hydroxyapatite and BVTV were evaluated within the projected US slice plane and thresholded to favorable (>2200 mg/cm3; >0.45 mm3/mm3), questionable (1500-2200 mg/cm3; 0.4-0.45 mm3/mm3), and unfavorable (<1500 mg/cm3; <0.4 mm3/mm3). The present US B-mode classification inversely scales with BMD. Regression analysis showed a significant relation between US classification and BMD as well as BVTV. T-test analysis demonstrated a significant correlation between US reader scores and the gold standard. When comparing Tier 1 with the combination of Tier 2 and 3, US achieved a significant group differentiation relative to mean BMD (p = 0.004, true positive 66.7%, false positive 0%, true negative 100%, false negative 33.3%, specificity 100%, sensitivity 66.7%, receiver operating characteristics area under the curve 0.86). Similar results were found between US-derived tiers and BVTV. CONCLUSION: Preliminary data suggest US could classify jawbone surface quality that correlates with BMD/BVTV and serve as the basis for future development of US-based socket healing evaluation after ARP.

Ultrasonography-Derived Elasticity Estimation of Live Porcine Oral Mucosa.

OBJECTIVES: To investigate the biomechanical properties of porcine oral tissues with in vivo ultrasonography and to compare the difference between oral alveolar mucosa and gingival tissue concerning compressional and tensile mechanical strain. MATERIALS AND METHODS: Sinclair minipigs (6 females and 4 males, 6 to 18 months of age) were anesthetized for ultrasonography. In vivo high-frequency tissue harmonic ultrasound (12/24 MHz) cine-loops were obtained while inducing mechanical tissue stress (0 to 1 N). Post-processing strain analysis was performed in a cardiac speckle tracking software (EchoInsight®). Region of interest (ROI) was placed for gingival and alveolar mucosa tissues for longitudinal (compressional) and tensile strain analyses. A calibrated gel pad was employed to determine the absolute force (pressure) for the measured tissue strain response function. The resulting elasticity data was statistically analyzed using custom Matlab scripts. RESULTS: In total, 38 sonography cine-loops around the third premolars were included in the investigation. The longitudinal strain of alveolar mucosa ε AM L was found to be significantly (P < .05) larger than that of gingiva ε G L . Across the measured force range, ε AM L ~ 1.7 × Îµ G L . Significant differences between alveolar mucosa and gingiva tissues were found for all forces. The tensile strain of the alveolar mucosa ε AM T was found to be ~2 × Îµ G T (on the epithelial surface of the gingiva). Both were statistically significantly different for forces exceeding ~0.08 N. At depth, that is, 500 and 1000 µm below the epithelial surface, the gingiva was found to have less ability to stretch contrary to the alveolar mucosa. Gingival tissue at 500 µm depth has significantly less tensile strain than at its surface and more than at 1000 µm depth. In contrast, the tensile strain of alveolar mucosa is largely independent of depth. CONCLUSION: Ultrasonography can reveal significant differences in oral alveolar mucosal and gingival elastic properties, such as compressional and tensile strain. Under minute forces equivalent to 10 to 40 g, these differences can be observed. As dental ultrasound is a chairside, and noninvasive modality, obtaining real-time images might soon find clinical utility as a new diagnostic tool for the objective and quantitative assessment of periodontal and peri-implant soft tissues in clinical and research realms. As ultrasound is a safe modality with no known bioeffects, longitudinal monitoring of areas of concern would be particularly attractive.

Temporomandibular joint ankylosis in Williams syndrome patient: an insight on the function of elastin in temporomandibular joint disorder.

Williams-Beuren syndrome (WS) is a rare genetic disorder that results from microdeletion at chromosome 7, which harbors the elastin gene. Clinical findings include arteriopathy, aortic stenosis, hypertension, and laxities and contractures in different joints throughout the body. While many components of the temporomandibular joint (TMJ) normally contain elastin, there are few reports on TMJ manifestations of WS. This study reports a TMJ ankylosis case in a WS patient and shares insight on a possible link between development of TMJ ankylosis and elastin deficiency in WS patients. A WS patient presented with bilateral TMJ ankylosis and was successfully treated with TMJ gap arthroplasty. Hypermobility of TMJ and lack of elastin in retrodiscal tissue can induce anterior disc displacement without reduction. Due to lack of elastin, which has a significant role in the compensatory and reparatory mechanism of TMJ, WS patients might be prone to TMJ ankylosis.

Color changes of ceramic veneers following glazing with respect to their composition.

PURPOSE: The purpose of this study was to compare the translucency and color changes of ceramic laminate veneers of different composition following glazing process. MATERIALS AND METHODS: 10 mm × 10 mm square specimens of 0.6 mm and 1.0 mm thicknesses were fabricated with IPS e.max Press (EM) and IPS e.max ZirPress (ZP) (n=10 per group). The color coordinates (CIE L* a* b*) of the specimens were recorded with a colorimeter before and after glazing. The color changes and translucency parameter (TP) were calculated. For the comparisons with the composition and thicknesses between the 'not glazed' and 'glazed' groups, statistical analyses were done through paired T-test, independent two-sample T-test, and multiple regression analysis using SPSS 18.0 (P<.05). RESULTS: The TP of 0.6 mm EM was higher than that of 0.6 mm ZP. Total color difference (ΔE*) between bare and glazed specimens of 1.0 mm EM was greater than that of 1.0 mm ZP with statistical significance. Following glazing, specimens from all groups showed statistically significant amount of decrease in L* and a*, and statistically significant increase in b*. The result of multiple regression analysis of EM and ZP showed that ΔL* improved ΔE*. CONCLUSION: Within the limitations of present study, we conclude that translucency and color of ceramic laminate veneers change significantly after glazing process, and the nature and amount of changes vary with different compositions.

Low-frequency pulsed electromagnetic field pretreated bone marrow-derived mesenchymal stem cells promote the regeneration of crush-injured rat mental nerve.

Bone marrow-derived mesenchymal stem cells (BMSCs) have been shown to promote the regeneration of injured peripheral nerves. Pulsed electromagnetic field (PEMF) reportedly promotes the proliferation and neuronal differentiation of BMSCs. Low-frequency PEMF can induce the neuronal differentiation of BMSCs in the absence of nerve growth factors. This study was designed to investigate the effects of low-frequency PEMF pretreatment on the proliferation and function of BMSCs and the effects of low-frequency PEMF pre-treated BMSCs on the regeneration of injured peripheral nerve using in vitro and in vivo experiments. In in vitro experiments, quantitative DNA analysis was performed to determine the proliferation of BMSCs, and reverse transcription-polymerase chain reaction was performed to detect S100 (Schwann cell marker), glial fibrillary acidic protein (astrocyte marker), and brain-derived neurotrophic factor and nerve growth factor (neurotrophic factors) mRNA expression. In the in vivo experiments, rat models of crush-injured mental nerve established using clamp method were randomly injected with low-frequency PEMF pretreated BMSCs, unpretreated BMSCs or PBS at the injury site (1 × 106 cells). DiI-labeled BMSCs injected at the injury site were counted under the fluorescence microscope to determine cell survival. One or two weeks after cell injection, functional recovery of the injured nerve was assessed using the sensory test with von Frey filaments. Two weeks after cell injection, axonal regeneration was evaluated using histomorphometric analysis and retrograde labeling of trigeminal ganglion neurons. In vitro experiment results revealed that low-frequency PEMF pretreated BMSCs proliferated faster and had greater mRNA expression of growth factors than unpretreated BMSCs. In vivo experiment results revealed that compared with injection of unpretreated BMSCs, injection of low-frequency PEMF pretreated BMSCs led to higher myelinated axon count and axon density and more DiI-labeled neurons in the trigeminal ganglia, contributing to rapider functional recovery of injured mental nerve. These findings suggest that low-frequency PEMF pretreatment is a promising approach to enhance the efficacy of cell therapy for peripheral nerve injury repair.

Biocompatibility and Biocorrosion of Hydroxyapatite-Coated Magnesium Plate: Animal Experiment.

Magnesium (Mg) has the advantage of being resorbed in vivo, but its resorption rate is difficult to control. With uncontrolled resorption, Magnesium as a bone fixation material has minimal clinical value. During resorption not only is the strength rapidly weakened, but rapid formation of metabolite also occurs. In order to overcome these disadvantages, hydroxyapatite (HA) surface coating of pure magnesium plate was attempted in this study. Magnesium plates were inserted above the frontal bone of Sprague-Dawley rats in both the control group (Bare-Mg group) and the experimental group (HA-Mg group). The presence of inflammation, infection, hydrogen gas formation, wound dehiscence, and/or plate exposure was observed, blood tests were performed, and the resorption rate and tensile strength of the retrieved metal plates were measured. The HA-Mg group showed no gas formation or plate exposure until week 12. However, the Bare-Mg group showed consistent gas formation and plate exposure beginning in week 2. WBC (White Blood Cell), BUN (Blood Urea Nitrogen), Creatinine, and serum magnesium concentration levels were within normal range in both groups. AST (Aspartate Aminotransferase) and ALT (Alanine Aminotransferase) values, however, were above normal range in some animals of both groups. The HA-Mg group showed statistically significant advantage in resistance to degradation compared to the Bare-Mg group in weeks 2, 4, 6, 8, and 12. Degradation of HA-Mg plates proceeded after week 12. Coating magnesium plates with hydroxyapatite may be a viable method to maintain their strength long enough to allow bony healing and to control the resorption rate during the initial period.

Autogenous demineralized dentin matrix from extracted tooth for the augmentation of alveolar bone defect: a prospective randomized clinical trial in comparison with anorganic bovine bone.

OBJECTIVES: The aim of this study was to prospectively evaluate the clinical efficacy and histological outcome of the autogenous tooth graft material (AutoBT) compared to that of anorganic bovine bone (Bio-Oss® , Geistlich, Switzerland) in post-extraction alveolar bone augmentation. PATIENTS AND METHODS: A total of 33 graft sites in 24 patients were included in this study. AutoBT was used in 21 sites of 15 patients and Bio-Oss® was used in 12 sites of 9 patients for alveolar bone augmentation 2-4 weeks after dental extraction. Vertical dimension of grafted bone was measured both at the time of graft placement and at implant fixture placement after 6 months. Trephine cores were harvested for the histomorphometric evaluations during implant placement when feasible. The primary stability of implant fixture was also measured. RESULTS: Infection of graft material or graft bed was not observed and graft sites healed without any notable complications in both groups. The vertical dimensions of alveolar bone increased by 5.38 ± 2.65 mm in AutoBT group and 6.56 ± 3.54 mm in Bio-Oss® group at 6 months post-extraction. Histomorphometrically, new bone formation of AutoBT-grafted site was 31.24 ± 13.87% while that of Bio-Oss® was 35.00 ± 19.33%. The implant stability quotient (ISQ) of implants placed in AutoBT-grafted sites measured 72.80 ± 10.81 while those placed in Bio-Oss® -grafted sites measured 70.0 ± 12.86. There were no statistically significant differences between measurements of the two groups. CONCLUSION: Autogenous demineralized dentin matrix from extracted tooth grafted to extraction sockets for the augmentation of vertical dimension was as effective as augmentation using anorganic bovine bone. Both groups showed favorable wound healing, similar amount of implant stability, and histologically confirmed new bone formation. Thus, the results of this study suggest that autogenous tooth graft material is a viable option for alveolar bone augmentation following dental extraction.

Tonsillectomy as prevention and treatment of sleep-disordered breathing: a report of 23 cases.

BACKGROUND: The paradigm of tonsillectomy has shifted from a treatment of recurrent throat infection to one of multi-discipline management modalities of sleep-disordered breathing (SDB). While tonsillectomy as a treatment for throat problems has been performed almost exclusively by otorhinolaryngologists, tonsillectomy as a part of the armamentarium for the multifactorial, multidisciplinary therapy of sleep-disordered breathing needs a new introduction to those involved in treating SDB patients. This study has its purpose in sharing a series of tonsillectomies performed at the Seoul National University Dental Hospital for the treatment and prevention of SDB in adult patients. METHODS: Total of 78 patients underwent tonsillectomy at the Seoul National University Dental Hospital from 1996 to 2015, and 23 of them who were operated by a single surgeon (Prof. Jin-Young Choi) were included in the study. Through retrospective chart review, the purpose of tonsillectomy, concomitant procedures, grade of tonsillar hypertrophy, surgical outcome, and complications were evaluated. RESULTS: Twenty-one patients diagnosed with SDB received multiple surgical procedures (uvulopalatal flap, uvulopalatopharyngoplasty, genioglossus advancement genioplasty, tongue base reduction, etc.) along with tonsillectomy. Two patients received mandibular setback orthognathic surgery with concomitant tonsillectomy in anticipation of postoperative airway compromise. All patients showed improvement in symptoms such as snoring and apneic events during sleep. CONCLUSIONS: When only throat infections were considered, tonsillectomy was a procedure rather unfamiliar to oral and maxillofacial surgeons. With a shift of primary indication from recurrent throat infections to SDB and emerging technological and procedural breakthroughs, simpler and safer tonsillectomy has become a major tool in the multidisciplinary treatment modality for SDB.