Micropatterned Biphasic Nanocomposite Platform for Maintaining Chondrocyte Morphology.

One major limitation hindering the translation of in vitro osteoarthritis research into clinical disease-modifying therapies is that chondrocytes rapidly spread and dedifferentiate under standard monolayer conditions. Current strategies to maintain rounded morphologies of chondrocytes in culture either unnaturally restrict adhesion and place chondrocytes in an excessively stiff mechanical environment or are impractical for use in many applications. To address the limitations of current techniques, we have developed a unique composite thin-film cell culture platform, the CellWell, to model articular cartilage that utilizes micropatterned hemispheroidal wells, precisely sized to fit individual cells (12-18 µm diameters), to promote physiologically spheroidal chondrocyte morphologies while maintaining compatibility with standard cell culture and analytical techniques. CellWells were constructed of 15-µm-thick 5% agarose films embedded with electrospun poly(vinyl alcohol) (PVA) nanofibers. Transmission electron microscope (TEM) images of PVA nanofibers revealed a mean diameter of 60.9 ± 24 nm, closely matching the observed 53.8 ± 29 nm mean diameter of human ankle collagen II fibers. Using AFM nanoindentation, CellWells were found to have compressive moduli of 158 ± 0.60 kPa at 15 µm/s indentation, closely matching published stiffness values of the native pericellular matrix. Primary human articular chondrocytes taken from ankle cartilage were seeded in CellWells and assessed at 24 h. Chondrocytes maintained their rounded morphology in CellWells (mean aspect ratio of 0.87 ± 0.1 vs three-dimensional (3D) control [0.86 ± 0.1]) more effectively than those seeded under standard conditions (0.65 ± 0.3), with average viability of >85%. The CellWell's design, with open, hemispheroidal wells in a thin film substrate of physiological stiffness, combines the practical advantages of two-dimensional (2D) culture systems with the physiological advantages of 3D systems. Through its ease of use and ability to maintain the physiological morphology of chondrocytes, we expect that the CellWell will enhance the clinical translatability of future studies conducted using this culture platform.

Differential peroxiredoxin hyperoxidation regulates MAP kinase signaling in human articular chondrocytes.

The peroxiredoxin (Prx) family of Cys-dependent peroxidases control intracellular levels of H2O2 and can regulate signal transduction. Inhibition of the Prxs, through hyperoxidation amongst other mechanisms, leads to oxidative stress conditions that can alter homeostatic signaling. To determine the effects oxidation of Prx1-Prx3 has on MAP kinase and IGF-1 signaling events in human chondrocytes, this study used 2-methyl-1,4-naphthoquinone (menadione) and 2,3-dimethyl-1,4-naphthoquinone (DMNQ) as H2O2-generating tools due to their differential mechanisms of action. Menadione and DMNQ generated similar levels of intracellular H2O2 as determined using the biosensor Orp1-roGFP and by measuring Prx redox status. However, menadione generated higher levels of mitochondrial H2O2 associated with Prx3 hyperoxidation and phosphorylation of Prx1 while DMNQ treatment was associated with hyperoxidation of cytosolic Prx1 and Prx2 but not mitochondrial Prx3. Both menadione and DMNQ induced sustained phosphorylation of p38 but only DMNQ activated JNK. Menadione but not DMNQ inhibited IGF-1-induced Akt phosphorylation. Chondrocytes transduced with an adenoviral vector to overexpress Prx3 displayed decreased PrxSO2/3 formation in response to menadione which was associated with restoration of IGF-1-mediated Akt signaling and inhibition of p38 phosphorylation. Prx1 and Prx2 overexpression had no effects on Prx redox status but Prx1 overexpression enhanced basal Akt phosphorylation. These results suggest that hyperoxidation of specific Prx isoforms is associated with distinct cell signaling events and identify Prx3 redox status as an important regulator of anabolic and catabolic signal transduction. Targeted strategies to prevent mitochondrial Prx3 hyperoxidation could be useful in maintaining cellular redox balance and homeostatic signaling.

Transparent titanium dioxide nanotubes: Processing, characterization, and application in establishing cellular response mechanisms.

The therapeutic applications of titanium dioxide nanotubes as osteogenic surface treatments for titanium-based implants are largely due to the finely tunable physical characteristics of these nanostructures. As these characteristics change, so does the cellular response, yet the exact mechanisms for this relationship remains largely undefined. We present a novel TiO2 NT imaging platform that is suitable for use with live-cell imaging techniques, thereby enabling, for the first time, dynamic investigation of those mechanisms. In this work, fabrication methods for producing transparent TiO2 NTs with diameters of 56 ±â€¯6 nm, 75 ±â€¯7 nm, 92 ±â€¯9 nm, and 116 ±â€¯10 nm are described. To demonstrate the diagnostic potential of these TiO2 NT imaging platforms, the focal adhesion protein vinculin and actin cytoskeletal filaments were fluorescently tagged in osteoblasts and real-time, high-resolution fluorescent microscopy of live-cell interactions with TiO2 NT substrates were observed. The scope of such a platform is expected to extend far beyond the current proof-of-concept, with great potential for addressing the dynamic response of cells interacting with nanostructured substrates. STATEMENT OF SIGNIFICANCE: Titanium dioxide (TiO2) nanotubes are known to strongly enhance bone/mesenchymal stem cell behavior and, consequently, have gained attention as potential osteogenic surface treatments for titanium-bone implants. The exact mechanism by which TiO2 nanotubes influence cellular function remains controversial, partly due to limitations in existing cellular imaging methods with opaque substrates. This work identifies fabrication conditions for the successful production of transparent TiO2 nanotube arrays with tailorable diameters, as well as their functionality with pre-osteoblast mouse cells (MC3T3-E1) transfected with fluorescent focal adhesion protein vinculin and cytoskeletal filament actin. We demonstrate a means of recording live-cell, cell-substrate interaction mechanisms via high-resolution fluorescent microscopy and customizable, transparent TiO2 nanotubes to begin defining the relationship between TiO2 nanotube features and cell function.

H2O2 oxidation of cysteine residues in c-Jun N-terminal kinase 2 (JNK2) contributes to redox regulation in human articular chondrocytes.

Reactive oxygen species (ROS), in particular H2O2, regulate intracellular signaling through reversible oxidation of reactive protein thiols present in a number of kinases and phosphatases. H2O2 has been shown to regulate mitogen-activated protein kinase (MAPK) signaling depending on the cellular context. We report here that in human articular chondrocytes, the MAPK family member c-Jun N-terminal kinase 2 (JNK2) is activated by fibronectin fragments and low physiological levels of H2O2 and inhibited by oxidation due to elevated levels of H2O2 The kinase activity of affinity-purified, phosphorylated JNK2 from cultured chondrocytes was reversibly inhibited by 5-20 µm H2O2 Using dimedone-based chemical probes that react specifically with sulfenylated cysteines (RSOH), we identified Cys-222 in JNK2, a residue not conserved in JNK1 or JNK3, as a redox-reactive site. MS analysis of human recombinant JNK2 also detected further oxidation at Cys-222 and other cysteines to sulfinic (RSO2H) or sulfonic (RSO3H) acid. H2O2 treatment of JNK2 resulted in detectable levels of peptides containing intramolecular disulfides between Cys-222 and either Cys-213 or Cys-177, without evidence of dimer formation. Substitution of Cys-222 to alanine rendered JNK2 insensitive to H2O2 inhibition, unlike C177A and C213A variants. Two other JNK2 variants, C116A and C163A, were also resistant to oxidative inhibition. Cumulatively, these findings indicate differential regulation of JNK2 signaling dependent on H2O2 levels and point to key cysteine residues regulating JNK2 activity. As levels of intracellular H2O2 rise, a switch occurs from activation to inhibition of JNK2 activity, linking JNK2 regulation to the redox status of the cell.

Oxidative Stress Promotes Peroxiredoxin Hyperoxidation and Attenuates Pro-survival Signaling in Aging Chondrocytes.

Oxidative stress-mediated post-translational modifications of redox-sensitive proteins are postulated as a key mechanism underlying age-related cellular dysfunction and disease progression. Peroxiredoxins (PRX) are critical intracellular antioxidants that also regulate redox signaling events. Age-related osteoarthritis is a common form of arthritis that has been associated with mitochondrial dysfunction and oxidative stress. The objective of this study was to determine the effect of aging and oxidative stress on chondrocyte intracellular signaling, with a specific focus on oxidation of cytosolic PRX2 and mitochondrial PRX3. Menadione was used as a model to induce cellular oxidative stress. Compared with chondrocytes isolated from young adult humans, chondrocytes from older adults exhibited higher levels of PRX1-3 hyperoxidation basally and under conditions of oxidative stress. Peroxiredoxin hyperoxidation was associated with inhibition of pro-survival Akt signaling and stimulation of pro-death p38 signaling. These changes were prevented in cultured human chondrocytes by adenoviral expression of catalase targeted to the mitochondria (MCAT) and in cartilage explants from MCAT transgenic mice. Peroxiredoxin hyperoxidation was observedin situin human cartilage sections from older adults and in osteoarthritic cartilage. MCAT transgenic mice exhibited less age-related osteoarthritis. These findings demonstrate that age-related oxidative stress can disrupt normal physiological signaling and contribute to osteoarthritis and suggest peroxiredoxin hyperoxidation as a potential mechanism.

Cysteine-Mediated Redox Regulation of Cell Signaling in Chondrocytes Stimulated With Fibronectin Fragments.

OBJECTIVE: Oxidative posttranslational modifications of intracellular proteins can potentially regulate signaling pathways relevant to cartilage destruction in arthritis. In this study, oxidation of cysteine residues to form sulfenic acid (S-sulfenylation) was examined in osteoarthritic (OA) chondrocytes and investigated in normal chondrocytes as a mechanism by which fragments of fibronectin (FN-f) stimulate chondrocyte catabolic signaling. METHODS: Chondrocytes isolated from OA and normal human articular cartilage were analyzed using analogs of dimedone that specifically and irreversibly react with protein S-sulfenylated cysteines. Global S-sulfenylation was measured in cell lysates with and without FN-f stimulation by immunoblotting and in fixed cells by confocal microscopy. S-sulfenylation in specific proteins was identified by mass spectroscopy and confirmed by immunoblotting. Src activity was measured in live cells using a fluorescence resonance energy transfer biosensor. RESULTS: Proteins in chondrocytes isolated from OA cartilage were found to have elevated basal levels of S-sulfenylation relative to those of chondrocytes from normal cartilage. Treatment of normal chondrocytes with FN-f induced increased levels of S-sulfenylation in multiple proteins, including the tyrosine kinase Src. FN-f treatment also increased the levels of Src activity. Pretreatment with dimedone to alter S-sulfenylation function or with Src kinase inhibitors inhibited FN-f-induced production of matrix metalloproteinase 13. CONCLUSION: These results demonstrate for the first time the presence of oxidative posttranslational modification of proteins in human articular chondrocytes by S-sulfenylation. Due to the ability to regulate the activity of a number of cell signaling pathways, including catabolic mediators induced by fibronectin fragments, S-sulfenylation may contribute to cartilage destruction in OA and warrants further investigation.

Activation of epidermal growth factor receptor is required for Chlamydia trachomatis development.

BACKGROUND: Chlamydia trachomatis (C. trachomatis) is a clinically significant human pathogen and one of the leading causative agents of sexually transmitted diseases. As obligate intracellular bacteria, C. trachomatis has evolved strategies to redirect the host's signaling and resources for its own survival and propagation. Despite the clinical notoriety of Chlamydia infections, the molecular interactions between C. trachomatis and its host cell proteins remain elusive. RESULTS: In this study, we focused on the involvement of the host cell epidermal growth factor receptor (EGFR) in C. trachomatis attachment and development. A combination of molecular approaches, pharmacological agents and cell lines were used to demonstrate distinct functional requirements of EGFR in C. trachomatis infection. We show that C. trachomatis increases the phosphorylation of EGFR and of its downstream effectors PLCγ1, Akt and STAT5. While both EGFR and platelet-derived growth factor receptor-ß (PDGFRß) are partially involved in bacterial attachment to the host cell surface, it is only the knockdown of EGFR and not PDGFRß that affects the formation of C. trachomatis inclusions in the host cells. Inhibition of EGFR results in small immature inclusions, and prevents C. trachomatis-induced intracellular calcium mobilization and the assembly of the characteristic F-actin ring at the inclusion periphery. By using complementary approaches, we demonstrate that the coordinated regulation of both calcium mobilization and F-actin assembly by EGFR are necessary for maturation of chlamydial inclusion within the host cells. A particularly important finding of this study is the co-localization of EGFR with the F-actin at the periphery of C. trachomatis inclusion where it may function to nucleate the assembly of signaling protein complexes for cytoskeletal remodeling required for C. trachomatis development. CONCLUSION: Cumulatively, the data reported here connect the function of EGFR to C. trachomatis attachment and development in the host cells, and this could lead to new venues for targeting C. trachomatis infections and associated diseases.

A linear programming approach to reconstructing subcellular structures from confocal images for automated generation of representative 3D cellular models.

This paper presents a novel computer vision algorithm to analyze 3D stacks of confocal images of fluorescently stained single cells. The goal of the algorithm is to create representative in silico model structures that can be imported into finite element analysis software for mechanical characterization. Segmentation of cell and nucleus boundaries is accomplished via standard thresholding methods. Using novel linear programming methods, a representative actin stress fiber network is generated by computing a linear superposition of fibers having minimum discrepancy compared with an experimental 3D confocal image. Qualitative validation is performed through analysis of seven 3D confocal image stacks of adherent vascular smooth muscle cells (VSMCs) grown in 2D culture. The presented method is able to automatically generate 3D geometries of the cell's boundary, nucleus, and representative F-actin network based on standard cell microscopy data. These geometries can be used for direct importation and implementation in structural finite element models for analysis of the mechanics of a single cell to potentially speed discoveries in the fields of regenerative medicine, mechanobiology, and drug discovery.

A computational approach to understand phenotypic structure and constitutive mechanics relationships of single cells.

The goal of this study is to construct a representative 3D finite element model (FEM) of individual cells based on their sub-cellular structures that predicts cell mechanical behavior. The FEM simulations replicate atomic force microscopy (AFM) nanoindentation experiments on live vascular smooth muscle cells. Individual cells are characterized mechanically with AFM and then imaged in 3D using a spinning disc confocal microscope. Using these images, geometries for the FEM are automatically generated via image segmentation and linear programming algorithms. The geometries consist of independent structures representing the nucleus, actin stress fiber network, and cytoplasm. These are imported into commercial software for mesh refinement and analysis. The FEM presented here is capable of predicting AFM results well for 500 nm indentations. The FEM results are relatively insensitive to both the exact number and diameter of fibers used. Despite the localized nature of AFM nanoindentation, the model predicts that stresses are distributed in an anisotropic manner throughout the cell body via the actin stress fibers. This pattern of stress distribution is likely a result of the geometric arrangement of the actin network.

Creating transient cell membrane pores using a standard inkjet printer.

Bioprinting has a wide range of applications and significance, including tissue engineering, direct cell application therapies, and biosensor microfabrication. Recently, thermal inkjet printing has also been used for gene transfection. The thermal inkjet printing process was shown to temporarily disrupt the cell membranes without affecting cell viability. The transient pores in the membrane can be used to introduce molecules, which would otherwise be too large to pass through the membrane, into the cell cytoplasm. The application being demonstrated here is the use of thermal inkjet printing for the incorporation of fluorescently labeled g-actin monomers into cells. The advantage of using thermal ink-jet printing to inject molecules into cells is that the technique is relatively benign to cells. Cell viability after printing has been shown to be similar to standard cell plating methods. In addition, inkjet printing can process thousands of cells in minutes, which is much faster than manual microinjection. The pores created by printing have been shown to close within about two hours. However, there is a limit to the size of the pore created (~10 nm) with this printing technique, which limits the technique to injecting cells with small proteins and/or particles. A standard HP DeskJet 500 printer was modified to allow for cell printing. The cover of the printer was removed and the paper feed mechanism was bypassed using a mechanical lever. A stage was created to allow for placement of microscope slides and coverslips directly under the print head. Ink cartridges were opened, the ink was removed and they were cleaned prior to use with cells. The printing pattern was created using standard drawing software, which then controlled the printer through a simple print command. 3T3 fibroblasts were grown to confluence, trypsinized, and then resuspended into phosphate buffered saline with soluble fluorescently labeled g-actin monomers. The cell suspension was pipetted into the ink cartridge and lines of cells were printed onto glass microscope cover slips. The live cells were imaged using fluorescence microscopy and actin was found throughout the cytoplasm. Incorporation of fluorescent actin into the cell allows for imaging of short-time cytoskeletal dynamics and is useful for a wide range of applications.

Role of cytoskeletal components in stress-relaxation behavior of adherent vascular smooth muscle cells.

A number of recent studies have demonstrated the effectiveness of atomic force microscopy (AFM) for characterization of cellular stress-relaxation behavior. However, this technique's recent development creates considerable need for exploration of appropriate mechanical models for analysis of the resultant data and of the roles of various cytoskeletal components responsible for governing stress-relaxation behavior. The viscoelastic properties of vascular smooth muscle cells (VSMCs) are of particular interest due to their role in the development of vascular diseases, including atherosclerosis and restenosis. Various cytoskeletal agents, including cytochalasin D, jasplakinolide, paclitaxel, and nocodazole, were used to alter the cytoskeletal architecture of the VSMCs. Stress-relaxation experiments were performed on the VSMCs using AFM. The quasilinear viscoelastic (QLV) reduced-relaxation function, as well as a simple power-law model, and the standard linear solid (SLS) model, were fitted to the resultant stress-relaxation data. Actin depolymerization via cytochalasin D resulted in significant increases in both rate of relaxation and percentage of relaxation; actin stabilization via jasplakinolide did not affect stress-relaxation behavior. Microtubule depolymerization via nocodazole resulted in nonsignificant increases in rate and percentage of relaxation, while microtubule stabilization via paclitaxel caused significant decreases in both rate and percentage of relaxation. Both the QLV reduced-relaxation function and the power-law model provided excellent fits to the data (R(2)=0.98), while the SLS model was less adequate (R(2)=0.91). Data from the current study indicate the important role of not only actin, but also microtubules, in governing VSMC viscoelastic behavior. Excellent fits to the data show potential for future use of both the QLV reduced-relaxation function and power-law models in conjunction with AFM stress-relaxation experiments.