Hydrophobicity, rather than secondary structure, is essential for the SRP dependent targeting of GPR35 to the ER membrane.

The folding and targeting of hydrophobic transmembrane domains poses a major challenge to the cell. Several membrane proteins have been shown to gain some degree of secondary structure within the ribosome tunnel and to retain this conformation throughout maturation. However, there is little information on one of the largest classes of eukaryotic membrane proteins; the G protein-coupled receptors (GPCRs). In this study we show that the signal anchor domain of GPR35 remains in an extended conformation whilst exiting the ribosome tunnel, the polypeptide chain then forms interactions with components of the SRP targeting pathway, and the Sec61 translocon, resulting in a compacted conformation prior to integration into the ER membrane. We conclude that transmembrane structure is most likely adopted after the domain leaves the ribosome tunnel and that the interaction of the signal anchor with SRP is dependent on the native levels of hydrophobicity within the first transmembrane domain. Therefore, we propose a mechanism by which the first transmembrane domains of multi-spanning membrane proteins adopt compacted structures following SRP targeting but before insertion into the ER membrane.

Increased freedom of movement in the nascent chain results in dynamic changes in the structure of the SecM arrest motif.

Ribosomes are responsible for the synthesis of all cellular proteins. Due to the diversity of sequence and properties, it was initially believed that translating nascent chains would travel unhindered through the ribosome exit tunnel, however a small but increasing number of proteins have been identified that interact with the exit tunnel to induce translational arrest, Escherichia coli (E. coli) secretion monitor (SecM) is one such stalling peptide. How and why these peptides interact with the exit tunnel is not fully understood, however key features required for stalling appear to be an essential peptide arrest motif at the C-terminus and compaction of the nascent chain within the exit tunnel upon stalling. Mutagenesis of the SecM arrest sequence has identified three conservative point mutations that can retain a degree of stalling in this highly conserved sequence. This level of stalling is further increased when coupled with mutation of a non-essential arrest motif residue P153A. Further analysis of these mutants by pegylation assays indicates that this increase in stalling activity during translation is due to the ability of the P153A mutation to reintroduce compaction of the nascent chain within the exit tunnel possibly due to the improved flexibility of the nascent chain provided by the removal of a restrictive proline residue. The data presented here suggest that arrest sequences may be more prevalent and less highly conserved than previously thought, and highlight the significance of the interactions between the nascent chain and the exit tunnel to affecting translation arrest.

Folding of a single domain protein entering the endoplasmic reticulum precedes disulfide formation.

The relationship between protein synthesis, folding, and disulfide formation within the endoplasmic reticulum (ER) is poorly understood. Previous studies have suggested that pre-existing disulfide links are absolutely required to allow protein folding and, conversely, that protein folding occurs prior to disulfide formation. To address the question of what happens first within the ER, that is, protein folding or disulfide formation, we studied folding events at the early stages of polypeptide chain translocation into the mammalian ER using stalled translation intermediates. Our results demonstrate that polypeptide folding can occur without complete domain translocation. Protein disulfide isomerase (PDI) interacts with these early intermediates, but disulfide formation does not occur unless the entire sequence of the protein domain is translocated. This is the first evidence that folding of the polypeptide chain precedes disulfide formation within a cellular context and highlights key differences between protein folding in the ER and refolding of purified proteins.

A structural ensemble of a ribosome-nascent chain complex during cotranslational protein folding.

Although detailed pictures of ribosome structures are emerging, little is known about the structural and cotranslational folding properties of nascent polypeptide chains at the atomic level. Here we used solution-state NMR spectroscopy to define a structural ensemble of a ribosome-nascent chain complex (RNC) formed during protein biosynthesis in Escherichia coli, in which a pair of immunoglobulin-like domains adopts a folded N-terminal domain (FLN5) and a disordered but compact C-terminal domain (FLN6). To study how FLN5 acquires its native structure cotranslationally, we progressively shortened the RNC constructs. We found that the ribosome modulates the folding process, because the complete sequence of FLN5 emerged well beyond the tunnel before acquiring native structure, whereas FLN5 in isolation folded spontaneously, even when truncated. This finding suggests that regulating structure acquisition during biosynthesis can reduce the probability of misfolding, particularly of homologous domains.

Post-translational membrane insertion of an endogenous YidC substrate.

Membrane protein insertion is controlled by proteinaceous factors embedded in the lipid bilayer. Bacterial inner membrane proteins utilise the Sec translocon as the major facilitator of insertion; however some proteins are Sec independent and instead require only YidC. A common feature of YidC substrates is the exposure of a signal anchor sequence when translation is close to completion; this allows minimal time for targeting and favours a post-translational insertion mechanism. Despite this there is little evidence of YidC's post-translational activity. Here we develop an experimental system that uncouples translation and insertion of the endogenous YidC substrate F0c (subunit c of the F0F1 ATP synthase). In this process we (i) develop a novel one step purification method for YidC, including an on column membrane reconstitution, (ii) isolate a soluble form of F0c and (iii) show that incubation of F0c with YidC proteoliposomes results in a high level of membrane integration. Conformational analyses of inserted F0c through Blue Native PAGE and fluorescence quenching reveal a native, oligomerised structure. These data show that YidC can act as a post-translational insertase, a finding which could explain the absence of a ribosome binding domain on YidC. This correlates with the post-translational activity of other YidC family members lacking the ribosome binding domain.

Compaction of a prokaryotic signal-anchor transmembrane domain begins within the ribosome tunnel and is stabilized by SRP during targeting.

Cotranslational targeting of membrane proteins is mediated by the universally conserved signal recognition particle (SRP). In eukaryotes, SRP attenuates translation during targeting; however, in prokaryotes, a simplified SRP is believed to carry out targeting during continuing translation. Here, we show a detailed stepwise analysis of the targeting of subunit c of the F(0) component of the bacterial ATP synthase (F(0)c) to the inner membrane. We show that the first transmembrane (TM) signal-anchor domain of F(0)c forms a compacted structure within the distal portion of the ribosome tunnel. This structure is formed just prior to the interaction with SRP. In the absence of SRP this structure is lost as the TM domain exits the tunnel; however in the presence of SRP it is stabilized. Our results suggest differences in early protein folding of substrates for prokaryotic SRP-dependent membrane protein targeting pathways, from that of eukaryotic SRP targeting. These results imply that early TM domain recognition by targeting factors acts to ensure that the efficiency of membrane targeting is maintained.

The conformation of a nascent polypeptide inside the ribosome tunnel affects protein targeting and protein folding.

In this report, we describe insights into the function of the ribosome tunnel that were obtained through an analysis of an unusual 25 residue N-terminal motif (EspP(1-25) ) associated with the signal peptide of the Escherichia coli EspP protein. It was previously shown that EspP(1-25) inhibits signal peptide recognition by the signal recognition particle, and we now show that fusion of EspP(1-25) to a cytoplasmic protein causes it to aggregate. We obtained two lines of evidence that both of these effects are attributable to the conformation of EspP(1-25) inside the ribosome tunnel. First, we found that mutations in EspP(1-25) that abolished its effects on protein targeting and protein folding altered the cross-linking of short nascent chains to ribosomal components. Second, we found that a mutation in L22 that distorts the tunnel mimicked the effects of the EspP(1-25) mutations on protein biogenesis. Our results provide evidence that the conformation of a polypeptide inside the ribosome tunnel can influence protein folding under physiological conditions and suggest that ribosomal mutations might increase the solubility of at least some aggregation-prone proteins produced in E. coli.

Translation arrest requires two-way communication between a nascent polypeptide and the ribosome.

When the export of E. coli SecM is blocked, a 17 amino acid motif near the C terminus of the protein induces a translation arrest from within the ribosome tunnel. Here we used a recently described application of fluorescence resonance energy transfer (FRET) to gain insight into the mechanism of translation arrest. We found that the SecM C terminus adopted a compact conformation upon synthesis of the arrest motif. This conformational change did not occur spontaneously, but rather was induced by the ribosome. Translation arrest required both compaction of the SecM C terminus and the presence of key residues in the arrest motif. Further analysis showed that the arrested peptidyl-tRNA was resistant to puromycin treatment and revealed additional changes in the ribosome-nascent SecM complex. Based on these observations, we propose that translation arrest results from a series of reciprocal interactions between the ribosome and the C terminus of the nascent SecM polypeptide.

Nascent membrane and secretory proteins differ in FRET-detected folding far inside the ribosome and in their exposure to ribosomal proteins.

Fluorescence resonance energy transfer measurements reveal that a transmembrane sequence within a nascent membrane protein folds into a compact conformation near the peptidyltransferase center and remains folded as the sequence moves through a membrane bound ribosome into the translocon. This compact conformation is compatible with an alpha helix because nearly the same energy transfer efficiency was observed when the transmembrane sequence was integrated into the lipid bilayer. Since the transmembrane sequence unfolds upon emerging from a free ribosome, this nascent chain folding is ribosome induced and stabilized. In contrast, a nascent secretory protein is in an extended conformation in the exit tunnel. Furthermore, two ribosomal proteins photo-crosslink to nascent membrane but not secretory proteins. These interactions coincide with the previously described sequential closing and opening of the two ends of the aqueous translocon pore, thereby suggesting that ribosomal recognition of nascent chain folding controls the operational mode of the translocon at the ER membrane.

Basic amino acids in a distinct subset of signal peptides promote interaction with the signal recognition particle.

Previous studies have demonstrated that signal peptides bind to the signal recognition particle (SRP) primarily via hydrophobic interactions with the 54-kDa protein subunit. The crystal structure of the conserved SRP ribonucleoprotein core, however, raised the surprising possibility that electrostatic interactions between basic amino acids in signal peptides and the phosphate backbone of SRP RNA may also play a role in signal sequence recognition. To test this possibility we examined the degree to which basic amino acids in a signal peptide influence the targeting of two Escherichia coli proteins, maltose binding protein and OmpA. Whereas both proteins are normally targeted to the inner membrane by SecB, we found that replacement of their native signal peptides with another moderately hydrophobic but unusually basic signal peptide (DeltaEspP) rerouted them into the SRP pathway. Reduction in either the net positive charge or the hydrophobicity of the DeltaEspP signal peptide decreased the effectiveness of SRP recognition. A high degree of hydrophobicity, however, compensated for the loss of basic residues and restored SRP binding. Taken together, the data suggest that the formation of salt bridges between SRP RNA and basic amino acids facilitates the binding of a distinct subset of signal peptides whose hydrophobicity falls slightly below a threshold level.

Unique structural determinants in the signal peptides of "spontaneously" inserting thylakoid membrane proteins.

A series of thylakoid membrane proteins, including PsbX, PsbY and PsbW, are synthesized with cleavable signal peptides yet inserted using none of the known Sec/SRP/Tat/Oxa1-type insertion machineries. Here, we show that, although superficially similar to Sec-type signal peptides, these thylakoidal signal peptides contain very different determinants. First, we show that basic residues in the N-terminal domain are not important, ruling out electrostatic interactions as an essential element of the insertion mechanism, and implying a fundamentally different targeting mechanism when compared with the structurally similar M13 procoat. Second, we show that acidic residues in the C-domain are essential for the efficient maturation of the PsbX and PsbY-A1 peptides, and that even a single substitution of the -5 Glu by Val in the PsbX signal peptide abolishes maturation in the thylakoid. Processing efficiency is restored to an extent, but not completely, by the highly hydrophilic Asn, implying that this domain is required to be hydrophilic, but preferably negatively charged, in order to present the cleavage site in an optimal manner. We show that substitution of the PsbX C-domain Glu residues by Val leads to a burial of the cleavage site within the bilayer although insertion is unaffected. Finally, we show that substitution of the Glu residues in the lumenal A2 loop of the PsbY polyprotein leads to a block in cleavage on the stromal side of the membrane, and present evidence that the PsbY-A2 signal peptide is required to be relatively hydrophilic and unable to adopt a transmembrane conformation on its own. These data indicate that, rather than being merely additional hydrophobic regions to promote insertion, the signal peptides of these thylakoid proteins are complex domains with uniquely stringent requirements in the C-domain and/or translocated loop regions.