Stress-Induced Intensification of Deoxyshikonin Production in Rindera graeca Hairy Root Cultures with Ester-Based Scaffolds.

In vitro plant cell and tissue culture systems allow for controlling a wide range of culture environmental factors selectively influencing biomass growth and the yield of secondary metabolites. Among the most efficient methods, complex supplementation of the culture medium with elicitors, precursors, and other functional substances may significantly enhance valuable metabolite productivity through a stress induction mechanism. In the search for novel techniques in plant experimental biotechnology, the goal of the study was to evaluate stress-inducing properties of novel biodegradable ester-based scaffolds made of poly(glycerol sebacate) (PGS) and poly(lactic acid) (PLA) influencing on the growth and deoxyshikonin productivity of Rindera graeca hairy roots immobilized on the experimental constructs. Rindera graeca hairy roots were maintained under the dark condition for 28 days in three independent systems, i.e., (i) non-immobilized biomass (a reference system), (ii) biomass immobilized on PGS scaffolds, and (iii) biomass immobilized on PLA scaffolds. The stress-inducing properties of the applied polymerized esters selectively impacted R. graeca hairy roots. The PGS scaffolds caused the production of deoxyshikonin, which does not occur in other culture systems, and PLA promoted biomass proliferation by doubling its increase compared to the reference system.

Synthesis of Poly(glycerol butenedioate)-PGB-Unsaturated Polyester toward Biomedical Applications.

A new polyester poly(glycerol butenedioate) (PGB) was obtained in the bulk polycondensation of glycerin and maleic anhydride. Glycerol polyesters are new biomaterials commonly used in tissue engineering. PGB, containing the α,ß-unsaturated moiety, could be very interesting due to potential modifications such as additions or oxidation. Such modifications are not possible on the heretofore known glycerol polyesters due to their structure without α,ß-unsaturated moieties. In this work, the developed process was optimized by applying the design of experiments. The optimization criterium was the minimization of the E/Z isomer ratio. Applying the two-stage process, the E/Z isomer ratio was reduced from 5.5 to 0.5 compared to the one-stage process. The degree of branching was also reduced from 17 to 9%, as well as the degree of esterification from 0.89 to 0.72. The obtained structure can be used in modifying or cross-linking via Michael additions.

Poly(Glycerol Succinate) as an Eco-Friendly Component of PLLA and PLCL Fibres towards Medical Applications.

This study was conducted as a first step in obtaining eco-friendly fibres for medical applications using a synthesised oligomer poly(glycerol succinate) (PGSu) as an additive for synthetic poly(L-lactic acid) (PLLA) and poly (L-lactide-co-caprolactone) (PLCL). The effects of the oligomer on the structure formation, morphology, crystallisation behaviour, and mechanical properties of electrospun bicomponent fibres were investigated. Nonwovens were investigated by means of scanning electron microscopy (SEM), wide angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and mechanical testing. The molecular structure of PLLA fibres is influenced by the presence of PGSu mainly acting as an enhancer of molecular orientation. In the case of semicrystalline PLCL, chain mobility was enhanced by the presence of PGSu molecules, and the crystallinity of bicomponent fibres increased in relation to that of pure PLCL. The mechanical properties of bicomponent fibres were influenced by the level of PGSu present and the extent of crystal formation of the main component. An in vitro study conducted using L929 cells confirmed the biocompatible character of all bicomponent fibres.

Ti2C MXene Modified with Ceramic Oxide and Noble Metal Nanoparticles: Synthesis, Morphostructural Properties, and High Photocatalytic Activity.

Among two-dimensional (2D) materials, such as graphene, a new family of 2D anisotropic carbides and nitrides of early transition metals (MXenes) is very interesting because of the potential applications in electronics, medicine, and photocatalysis. In this paper, preparation, morphostructural characterization, band gaps determination, and salicylic acid photodegradation ability of Ti2C MXene and six nanocomposites consisting of the MXene modified by TiO2, Ag2O, Ag, PdO, Pd, and Au are reported. It was confirmed using electron diffraction studies, energy dispersive X-ray spectroscopy, and high-resolution transmission microscopy that metals and metal oxides occur on the MXene flakes as nanoparticles in a shape of spots. The band gaps determined experimentally using Tauc's method are placed in the region of 0.90-1.31 eV. In recent years, the method of photocatalytic decomposition of pollutants using semiconductor photocatalysts and UV-vis energy has become increasingly important. The MXene based nanocomposites revealed high activity in the salicylic acid (SA) photodegradation reaction (86.1-97.1% of degraded SA after 3 h, concentration of SA initial solution 100 µM, the circulation rate of the SA solution 0.875 cm3/min). The interfacial charge transfer mechanism and the role of the metallic and metal oxide nanoparticles in the photocatalytic activity of the MXene based nanocomposites are presented and discussed.

Poly(Glycerol Sebacate)-Poly(l-Lactide) Nonwovens. Towards Attractive Electrospun Material for Tissue Engineering.

Two types of poly(glycerol sebacate) (PGS) prepolymers were synthesized and electrospun with poly(l-lactic acid) (PLA), resulting in bicomponent nonwovens. The obtained materials were pre-heated in a vacuum, at different times, to crosslink PGS and investigate morphological and structural dependencies in that polymeric, electrospun system. As both PGS and PLA are sensitive to pre-heating (crosslinking) conditions, research concerns both components. More interest is focused on the properties of PGS, considering further research for mechanical properties and subsequent experiments with PGS synthesis. Electrospinning of PGS blended with PLA does not bring difficulties, but obtaining elastomeric properties of nonwovens is problematic. Even though PGS has many potential advantages over other polyesters when soft tissue engineering is considered, its full utilization via the electrospinning process is much harder in practice. Further investigations are ongoing, especially with the promising PGS prepolymer with a higher esterification degree and its variations.