RESUMO
All-polymer photodetectors possess unique mechanical flexibility and are ideally suitable for the application in next-generation flexible, wearable short-wavelength infrared (SWIR, 1000-2700 nm) photodetectors. However, all-polymer photodetectors commonly suffer from low sensitivity, high noise, and low photoresponse speed in the SWIR region, which significantly diminish their application potential in wearable electronics. Herein, two polymer acceptors with absorption beyond 1000 nm, namely P4TOC-DCBT and P4TOC-DCBSe, were designed and synthesized. The two polymers possess rigid structure and good conformational stability, which is beneficial for reducing energetic disorder and suppressing dark current. Owing to the efficient charge generation and ultralow noise current, the P4TOC-DCBT-based all-polymer photodetector achieved a specific detectivity () of over 1012 Jones from 650 (visible) to 1070 nm (SWIR) under zero bias, with a response time of 1.36 µs. These are the best results for reported all-polymer SWIR photodetectors in photovoltaic mode. More significantly, the all-polymer blend films exhibit good mechanical durability, and hence the P4TOC-DCBT-based flexible all-polymer photodetectors show a small performance attenuation (<4%) after 2000 cycles of bending to a 3 mm radius. The all-polymer flexible SWIR organic photodetectors are successfully applied in pulse signal detection, optical communication and image capture.
RESUMO
Graphene-like molecules with multiple zigzag edges are emerging as promising gain materials for organic lasers. Their emission wavelengths can vary widely, ranging from visible to near-infrared (NIR), as the molecular size increases. Specifically, rhombus-shaped molecular graphenes with two pairs of parallel zigzag edges, known as [n]rhombenes, are excellent candidates for NIR lasers due to their small energy gaps. However, synthesizing large-size rhombenes with emission beyond 800â nm in solution remains a significant challenge. In this study, we present a straightforward synthesis of an aryl-substituted [4]rhombene derivative, [4]RB-Ar, using a method that combines intramolecular radical-radical coupling with Bi(OTf)3-mediated cyclization of vinyl ethers. The structure of [4]RB-Ar was confirmed through X-ray crystallographic analysis. Bond length analysis and theoretical calculations indicate that aromatic sextets are predominantly localized along the molecule's long axis. Significantly, [4]RB-Ar demonstrates narrow amplified spontaneous emission at around 834â nm when dispersed in polystyrene thin films. Moreover, solution-processed distributed feedback lasers employing [4]RB-Ar as the active gain material display tunable narrow emissions in the range of 830 to 844â nm.
RESUMO
Redox-active organic molecules have potential as electrode materials, but their cycling stability is often limited by the irreversible formation of σ-bonds from the radical intermediates. Herein, we present an effective approach to achieve high reversibility by using lone pair electrons to mediate intramolecular radical-radical coupling. Azatriangulenetrione (1) was examined as the anode in sodium-ion batteries, which displayed a reversible four-step, one-electron redox chemistry. In situ electron spin resonance, ex situ Fourier transform infrared/X-ray photoelectron spectroscopy, and density functional theory calculation revealed that the unstable radical anions can couple with each other through the lone pair electrons of the central nitrogen atom, leading to stabilized radical species. Furthermore, scan-rate-dependent cyclic voltammetry measurements and galvanostatic intermittent titration techniques demonstrated that the redox reaction kinetics for radical formation were much faster than the radical paring process. This study offers deep insights into the design of highly reversible organic electrodes.
RESUMO
The functional properties of organic semiconductors are defined by the interplay between optically bright and dark states. Organic devices require rapid conversion between these bright and dark manifolds for maximum efficiency, and one way to achieve this is through multiexciton generation (S1â1TT). The dark state 1TT is typically generated from bright S1 after optical excitation; however, the mechanistic details are hotly debated. Here we report a 1TT generation pathway in which it can be coherently photoexcited, without any involvement of bright S1. Using <10-fs transient absorption spectroscopy and pumping sub-resonantly, 1TT is directly generated from the ground state. Applying this method to a range of pentacene dimers and thin films of various aggregation types, we determine the critical material properties that enable this forbidden pathway. Through a strikingly simple technique, this result opens the door for new mechanistic insights into 1TT and other dark states in organic materials.
RESUMO
The syntheses of high-spin organic polymers have been a daunting task due to the highly reactive nature of organic radicals, especially when they are ferromagnetically coupled. In this paper, we report our approach to obtain high-spin organic polymers, in which a reasonably stable fluorenyl radical was employed as the primary radical unit, and s-triazine serves as the connector that facilitates ferromagnetic coupling between them. Initially, the diamagnetic polymer precursor was synthesized by cyclotrimerization of a cyano-monomer. Subsequently, the high-spin polymers were obtained by oxidizing corresponding anionic polymers using O2 (6) or I2 (7). The temperature-dependent magnetic moments, and field-dependent magnetization data obtained from SQUID measurements revealed ferromagnetic couplings between primary radical units, with coupling J = 7.5 cm-1 and 38.6 cm-1. The percentages of primary unit in the radical form are 29%, and 47% for 6 and 7, respectively. Notably, this marks the first reported instance of a high-spin fluorenyl radical polymer exhibiting ferromagnetic coupling.
RESUMO
Inspired by the retina, artificial optoelectronic synapses have groundbreaking potential for machine vision. The field-effect transistor is a crucial platform for optoelectronic synapses that is highly sensitive to external stimuli and can modulate conductivity. On the basis of the decent optical absorption, perovskite materials have been widely employed for constructing optoelectronic synaptic transistors. However, the reported optoelectronic synaptic transistors focus on the static processing of independent stimuli at different moments, while the natural visual information consists of temporal signals. Here, we report CsPbBrI2 nanowire-based optoelectronic synaptic transistors to study the dynamic responses of artificial synaptic transistors to time-varying visual information for the first time. Moreover, on the basis of the dynamic synaptic behavior, a hardware system with an accuracy of 85% is built to the trajectory of moving objects. This work offers a new way to develop artificial optoelectronic synapses for the construction of dynamic machine vision systems.
RESUMO
Open-shell nanographenes exhibit unconventional π-magnetism arising from topological frustration or strong electron-electron interaction. However, conventional design approaches are typically limited to a single magnetic origin, which can restrict the number of correlated spins or the type of magnetic ordering in open-shell nanographenes. Here we present a design strategy that combines topological frustration and electron-electron interactions to fabricate a large fully fused 'butterfly'-shaped tetraradical nanographene on Au(111). We employ bond-resolved scanning tunnelling microscopy and spin-excitation spectroscopy to resolve the molecular backbone and reveal the strongly correlated open-shell character, respectively. This nanographene contains four unpaired electrons with both ferromagnetic and anti-ferromagnetic interactions, harbouring a many-body singlet ground state and strong multi-spin entanglement, which is well described by many-body calculations. Furthermore, we study the magnetic properties and spin states in the nanographene using a nickelocene magnetic probe. The ability to imprint and characterize many-body strongly correlated spins in polyradical nanographenes paves the way for future advancements in quantum information technologies.
RESUMO
Expanded azahelicenes, as heteroanalogues of helically chiral helicenes, hold significant potential for chiroptical materials. Nevertheless, their investigation and research have remained largely unexplored. Herein, we present the facile synthesis of a series of expanded azahelicenes NHn (n=1-5) consisting of 11, 19, 27, 35, and 43 fused rings, mainly by Suzuki coupling followed by Bi(OTf)3-mediated cyclization of vinyl ethers. The structures of NH2, NH3 and NH4 were confirmed through X-ray crystallography analysis, and their (P)- and (M)- enantiomers were also isolated with chiral high performance liquid chromatography. The enantiomers exhibit large absorption (abs) and luminescence (lum) dissymmetry factors, with |gabs|max=0.044; |glum|max=0.003 for NH2, |gabs|max=0.048; |glum|=0.014 for NH3, and |gabs|max=0.043; |glum|max=0.021 for NH4, which are superior to their respective all-carbon analogues.
RESUMO
The exploration of annulene's conformation, electronic properties and aromaticity has generated enduring interest over the years, yet it continues to present formidable challenges for annulenes with more than ten carbon atoms. In this study, we present the synthesis of a stable [10]cyclo-para-phenylmethine derivative (1), which bears a resemblance to [10]annulene. 1 can be readily oxidized into its respective cations, wherein electrons are effectively delocalized along the backbone, resulting in different conformations and aromaticity. Both 1 and its tetracation (14+ â 4SbF6 - ) exhibit a nearly planar conformation with a rectangular shape, akin to the E,Z,E,Z,Z-[10]annulene. In contrast, the radical cation (1â + â SbCl6 - ) possesses a doubly twisted Hückel topology. Furthermore, the dication (12+ â 2SbCl6 - ) displays conformational flexibility in solution and crystalizes with the simultaneous presence of Möbius-twisted (1a2+ â 2SbCl6 - ) and Hückel-planar (1b2+ â 2SbCl6 - ) isomers in its unit cell. Detailed experimental measurements and theoretical calculations reveal that: (1) 1 demonstrates localized aromaticity with an alternating benzenoid/quinoid structure; (2) 1a2+ â 2SbCl6 - and 1b2+ â 2SbCl6 - with 48π electrons are weakly Möbius aromatic and Hückel antiaromatic, respectively; (3) 14+ â 4SbF6 - exhibits Hückel aromaticity (46π) and open-shell diradical character.
RESUMO
The study of through-space electronic coupling in π-conjugated systems remains an underexplored area. In this work, we present the facile synthesis of two isomeric macrocycles (1 and 2) bridged by [2,2]paracyclophane (pCp) and based on thiophene. The structures of these macrocycles have been confirmed through X-ray crystallographic analysis. Our investigation centers on their electronic properties across various redox states, with a specific focus on potential through-space electronic coupling and global aromaticity. Experimental measurements, including UV-vis-NIR electronic absorption, NMR, ESR spectra, and X-ray diffraction, combined with theoretical calculations, reveal that both the neutral compounds and their tetracations exhibit a closed-shell ground state. However, their dications manifest as diradical dications with a subtle magnetic exchange interaction. Consequently, the through-space electronic coupling facilitated by the pCp unit in their respective ground states appears to be weak.
RESUMO
The atomic doping of open-shell nanographenes enables precise tuning of their electronic and magnetic states, which is crucial for their promising potential applications in optoelectronics and spintronics. Among this intriguing class of molecules, triangulenes stand out with their size-dependent electronic properties and spin states, which can also be influenced by the presence of dopant atoms and functional groups. However, the occurrence of Jahn-Teller distortions in such systems can have a crucial impact on their total spin and requires further theoretical and experimental investigation. In this study, we examine the nitrogen-doped aza-triangulene series via a combination of density functional theory and on-surface synthesis. We identify a general trend in the calculated spin states of aza-[n]triangulenes of various sizes, separating them into two symmetry classes, one of which features molecules that are predicted to undergo Jahn-Teller distortions that reduce their symmetry and thus their total spin. We link this behavior to the location of the central nitrogen atom relative to the two underlying carbon sublattices of the molecules. Consequently, our findings reveal that neutral centrally doped aza-triangulenes have one less radical than their undoped counterparts, irrespective of their predicted symmetry. We follow this by demonstrating the on-surface synthesis of π-extended aza-[5]triangulene, a large member of the higher symmetry class without Jahn-Teller distortions, via a simple one-step annealing process on Cu(111) and Au(111). Using scanning probe microscopy and spectroscopy combined with theoretical calculations, we prove that the molecule is positively charged on the Au(111) substrate, with a high-spin quintet state of S = 2, the same total spin as undoped neutral [5]triangulene. Our study uncovers the correlation between the dopant position and the radical nature of high-spin nanographenes, providing a strategy for the design and development of these nanographenes for various applications.
RESUMO
The creation and development of carbon nanomaterials promoted material science significantly. Bottom-up synthesis has emerged as an efficient strategy to synthesize atomically precise carbon nanomaterials, namely, molecular carbons, with various sizes and topologies. Different from the properties of the feasibly obtained mixture of carbon nanomaterials, numerous properties of single-component molecular carbons have been discovered owing to their well-defined structures as well as potential applications in various fields. This Perspective introduces recent advances in molecular carbons derived from fullerene, graphene, carbon nanotube, carbyne, graphyne, and Schwarzite carbon acquired with different synthesis strategies. By selecting a variety of representative examples, we elaborate on the relationship between molecular carbons and carbon nanomaterials. We hope these multiple points of view presented may facilitate further advancement in this field.
RESUMO
Polycyclic aromatic hydrocarbons (PAHs) with a one-dimensional (1D), ribbon-like structure have the potential to serve as both model compounds for corresponding graphene nanoribbons (GNRs) and as materials for optoelectronics applications. However, synthesizing molecules of this type with extended π-conjugation presents a significant challenge. In this study, we present a straightforward synthetic method for a series of bis-peri-dinaphtho-rylene molecules, wherein the peri-positions of perylene, quaterrylene, and hexarylene are fused with naphtho-units. These molecules were efficiently synthesized primarily through intramolecular or intermolecular radical coupling of in situ generated organic radical species. Their structures were confirmed using X-ray crystallographic analysis, which also revealed a slightly bent geometry due to the incorporation of a cyclopentadiene ring at the bay regions of the rylene backbones. Bond lengh analysis and theoretical calculations indicate that their electronic structures resemble pyrenacenes more than quinoidal rylenes. That is, the aromatic sextets are predominantly localized along the long axis of the skeletones. As the chain length increases, these molecules exhibit enhanced electronic absorption with a bathochromic shift, and multiple amphoteric redox waves. This study introduces a novel synthetic approach for generating 1D extended PAHs and GNRs, along with their structure-dependent electronic properties.
RESUMO
Twisted polyarenes with persistent chirality are desirable but their synthesis has remained a challenge. In this study, we present a "one-pot" synthesis of 1,2:8,9-dibenzozethrene (DBZ) and its vertically fused dimers and trimers using nickel-catalyzed cyclo-oligomerization reactions. X-ray crystallographic analysis confirmed highly twisted helical structures that consist of equal parts left- and right-handed enantiomers. Notably, the end-to-end twist between the terminal anthracene units measured 66°, 130°, and 201° for the DBZ monomer, dimer, and trimer, respectively, setting a new record among twisted polyarenes. Furthermore, the chiral resolution by HPLC yielded two enantiomers for the fused DBZ dimer and trimer, both of which maintained stable configurations and showed absorption dissymmetry factors of around 0.008-0.009. Additionally, their optical and electrochemical properties were investigated, which exhibited a chain-length dependence.
RESUMO
Recovery of carbon-based resources from waste is a critical need for achieving carbon neutrality and reducing fossil carbon extraction. We demonstrate a new approach for extracting volatile fatty acids (VFAs) using a multifunctional direct heated and pH swing membrane contactor. The membrane is a multilayer laminate composed of a carbon fiber (CF) bound to a hydrophobic membrane and sealed with a layer of polydimethylsiloxane (PDMS); this CF is used as a resistive heater to provide a thermal driving force for PDMS that, while a highly hydrophobic material, is known for its ability to rapidly pass gases, including water vapor. The transport mechanism for gas transport involves the diffusion of molecules through the free volume of the polymer matrix. CF coated with polyaniline (PANI) is used as an anode to induce an acidic pH swing at the interface between the membrane and water, which can protonate the VFA molecule. The innovative multilayer membrane used in this study has successfully demonstrated a highly efficient recovery of VFAs by simultaneously combining pH swing and joule heating. This novel technique has revealed a new concept in the field of VFA recovery, offering promising prospects for further advancements in this area. The energy consumption was 3.37 kWh/kg for acetic acid (AA), and an excellent separation factor of AA/water of 51.55 ± 2.11 was obtained with high AA fluxes of 51.00 ± 0.82 g.m-2hr-1. The interfacial electrochemical reactions enable the extraction of VFAs without the need for bulk temperature and pH modification.
Assuntos
Ácido Acético , Ácidos Graxos Voláteis , Ácidos Graxos Voláteis/química , Gases , Fenômenos Físicos , CarbonoRESUMO
Ammonia is considered a contaminant to be removed from wastewater. However, ammonia is a valuable commodity chemical used as the primary feedstock for fertilizer manufacturing. Here we describe a simple and low-cost ammonia gas stripping membrane capable of recovering ammonia from wastewater. The material is composed of an electrically conducting porous carbon cloth coupled to a porous hydrophobic polypropylene support, that together form an electrically conductive membrane (ECM). When a cathodic potential is applied to the ECM surface, hydroxide ions are produced at the water-ECM interface, which transforms ammonium ions into higher-volatility ammonia that is stripped across the hydrophobic membrane material using an acid-stripping solution. The simple structure, low cost, and easy fabrication process make the ECM an attractive material for ammonia recovery from dilute aqueous streams, such as wastewater. When paired with an anode and immersed into a reactor containing synthetic wastewater (with an acid-stripping solution providing the driving force for ammonia transport), the ECM achieved an ammonia flux of 141.3 ± 14.0 g.cm-2.day-1 at a current density of 6.25 mA.cm-2 (69.2 ± 5.3 kg(NH3-N)/kWh). It was found that the ammonia flux was sensitive to the current density and acid circulation rate.
Assuntos
Amônia , Compostos de Amônio , Amônia/análise , Amônia/química , Águas Residuárias , Compostos de Amônio/química , Eletricidade , ÍonsRESUMO
Aromaticity is one of the most deeply rooted concepts in chemistry. But why, if two-thirds of existing compounds can be classified as aromatic, is there no consensus on what aromaticity is? σ-, π-, δ-, spherical, Möbius, or all-metal aromaticity why are so many attributes needed to specify a property? Is aromaticity a dubious concept? This perspective aims to reflect where the aromaticity community is and where it is going.
RESUMO
Large graphene-like molecules with four zigzag edges are ideal gain medium materials for organic near-infrared (NIR) lasers. However, synthesizing them becomes increasingly challenging as the molecular size increases. In this study, we introduce a new intramolecular radical-radical coupling approach and successfully synthesize two fused triangulene dimers (1 a/1 b) efficiently. X-ray crystallographic analysis of 1 a indicates that there is no intermolecular π-π stacking in the solid state. When the more soluble derivative 1 b is dispersed in polystyrene thin films, amplified spontaneous emission in the NIR region is observed. Using 1 b as the active gain material, we fabricate solution-processed distributed feedback lasers that exhibit a narrow emission linewidth at around 790â nm. The laser devices also exhibit low thresholds with high photostability. Our study provides a new synthetic strategy for extended nanographenes, which have diverse applications in electronics and photonics.
RESUMO
The research on aromaticity has mainly focused on monocyclic [n]annulene-like systems or polycyclic aromatic hydrocarbons. For fully π-conjugated multicyclic macrocycles (MMCs), the electronic coupling between the individual constitutional macrocycles would lead to unique electronic structures and aromaticity. The studies on MMCs, however, are quite limited, presumably due to the great challenges to design and synthesize a fully π-conjugated MMC molecule. Herein, we report the facile synthesis of two MMCs (2TMC and 3TMC) in which two and three thiophene-based macrocycles are fused together by employing both intramolecular and intermolecular Yamamoto coupling reactions of a properly designed precursor (7). The monocyclic macrocycle (1TMC) was also synthesized as a model compound. The geometry, aromaticity, and electronic properties of these macrocycles at different oxidation states were investigated by X-ray crystallographic analysis, NMR, and theoretical calculations, which disclosed how the constitutional macrocycles interplay with each other and lead to unique aromatic/antiaromatic character. This study provides new insights into the complex aromaticity in MMC systems.