Non-trade-off Changes in Soil Conservation Service and Soil Loss on the Tibetan Plateau Underlying the Impacts of Climate Change and human activities.

Climate change and human activities have significantly influenced soil loss and the soil conservation service, posed threats to regional ecological sustainability. However, the relationships and underlying driving forces between potential soil loss, actual soil loss, and soil conservation service have not been well understood. Utilizing the Integrated Valuation of Ecosystem Services and Trade-offs (InVEST) model, we evaluated the soil conservation service on the Tibetan plateau from 1990 to 2020. We analyzed the spatial and temporal trends and examined the driving factors using linear regression, Pearson correlation, and random forest regression. The soil conservation service exhibited a complex pattern of increase followed by a decrease, with a turning point around 2010. Soil conservation service and soil loss demonstrated non-trade-off changes. The potential soil loss dominated the spatiotemporal patterns of soil conservation service on the Tibetan Plateau. Climatic factors significantly influenced the spatiotemporal patterns of soil conservation service, with annual precipitation emerging as the dominant driving factor, contributing approximately 20%. However, the impacts of human activities became more pronounced since 2010, and the contribution of vegetation to changes in soil conservation service was increased. The impact of the Normalized Difference Vegetation Index (NDVI) on soil conservation service for the grades I, II, and III increased by 13.19%, 3.08%, and 3.41%, respectively. Conversely, in northern Tibet before 2010 and eastern Three-River-Source after 2010, soil conservation service exhibited an increasing trend driven by both climate factors and human activities. Which indicates that the implementation of ecological restoration measures facilitated vegetation improvement and subsequently reduced actual soil loss. This study provides a scientific basis for resource management, land development strategies, and the formulation of ecological restoration measures on the Tibetan Plateau.

Localisation of the centre of the highest region of muscle spindle abundance of anterior forearm muscles.

The centre of the highest region of muscle spindle abundance (CHRMSA) in the intramuscular nerve-dense region has been suggested as the optimal target location for injecting botulinum toxin A to block muscle spasms. The anterior forearm muscles have a high incidence of spasticity. However, the CHRMSA in the intramuscular nerve-dense region of the forearm anterior muscle group has not been defined. This study aimed to accurately define the body surface position and the depth of CHRMSA in an intramuscular nerve-dense region of the anterior forearm muscles. Twenty-four adult cadavers (57.7 ± 11.5 years) were included in this study. The curved line close to the skin connecting the medial and lateral epicondyles of the humerus was designated as the horizontal reference line (H line), and the line connecting the medial epicondyle of the humerus and the ulnar styloid was defined as the longitudinal reference line (L line). Modified Sihler's staining, haematoxylin-eosin staining and computed tomography scanning were employed to determine the projection points (P and P') of the CHRMSAs on the anterior and posterior surfaces of the forearm. The positions (PH and PL) of point P projected onto the H and L lines, and the depth of each CHRMSA, were determined using the Syngo system. The PH of the CHRMSA of the ulnar head of pronator teres, humeral head of pronator teres, flexor carpi radialis, palmaris longus, flexor carpi ulnaris, ulnar part of flexor digitorum superficialis, radial part of flexor digitorum superficialis, flexor pollicis longus, ulnar part of flexor digitorum profundus, radial portion of flexor digitorum profundus and pronator quadratus muscles were located at 42.48%, 45.52%, 41.20%, 19.70%, 7.77%, 25.65%, 47.42%, 53.47%, 12.28%, 38.41% and 51.68% of the H line, respectively; the PL were located at 18.38%, 12.54%, 28.83%, 13.43%, 17.65%, 32.76%, 57.32%, 64.12%, 20.05%, 45.94% and 88.71% of the L line, respectively; the puncture depths were located at 21.92%, 27.25%, 23.76%, 18.04%, 15.49%, 31.36%, 26.59%, 41.28%, 38.72%, 45.14% and 53.58% of the PP' line, respectively. The percentage values are the means of individual values. We recommend that the body surface puncture position and depth of the CHRMSA are the preferred locations for the intramuscular injection of botulinum toxin A to block anterior forearm muscle spasms.

Optimizing the Spatial Density of Single Co Sites via Molecular Spacing for Facilitating Sustainable Water Oxidation.

Advances in single-atom (-site) catalysts (SACs) provide a new solution of atomic economy and accuracy for designing efficient electrocatalysts. In addition to a precise local coordination environment, controllable spatial active structure and tolerance under harsh operating conditions remain great challenges in the development of SACs. Here, we show a series of molecule-spaced SACs (msSACs) using different acid anhydrides to regulate the spatial density of discrete metal phthalocyanines with single Co sites, which significantly improve the effective active-site numbers and mass transfer, enabling one of the msSACs connected by pyromellitic dianhydride to exhibit an outstanding mass activity of (1.63 ± 0.01) × 105 A·g-1 and TOFbulk of 27.66 ± 1.59 s-1 at 1.58 V (vs RHE) and long-term durability at an ultrahigh current density of 2.0 A·cm-2 under industrial conditions for oxygen evolution reaction. This study demonstrates that the accessible spatial density of single atom sites can be another important parameter to enhance the overall performance of catalysts.

Autophagy protein 5 controls flow-dependent endothelial functions.

Dysregulated autophagy is associated with cardiovascular and metabolic diseases, where impaired flow-mediated endothelial cell responses promote cardiovascular risk. The mechanism by which the autophagy machinery regulates endothelial functions is complex. We applied multi-omics approaches and in vitro and in vivo functional assays to decipher the diverse roles of autophagy in endothelial cells. We demonstrate that autophagy regulates VEGF-dependent VEGFR signaling and VEGFR-mediated and flow-mediated eNOS activation. Endothelial ATG5 deficiency in vivo results in selective loss of flow-induced vasodilation in mesenteric arteries and kidneys and increased cerebral and renal vascular resistance in vivo. We found a crucial pathophysiological role for autophagy in endothelial cells in flow-mediated outward arterial remodeling, prevention of neointima formation following wire injury, and recovery after myocardial infarction. Together, these findings unravel a fundamental role of autophagy in endothelial function, linking cell proteostasis to mechanosensing.

Atomically Dispersed Dual-Metal Sites Showing Unique Reactivity and Dynamism for Electrocatalysis.

The real structure and in situ evolution of catalysts under working conditions are of paramount importance, especially for bifunctional electrocatalysis. Here, we report asymmetric structural evolution and dynamic hydrogen-bonding promotion mechanism of an atomically dispersed electrocatalyst. Pyrolysis of Co/Ni-doped MAF-4/ZIF-8 yielded nitrogen-doped porous carbons functionalized by atomically dispersed Co-Ni dual-metal sites with an unprecedented N8V4 structure, which can serve as an efficient bifunctional electrocatalyst for overall water splitting. More importantly, the electrocatalyst showed remarkable activation behavior due to the in situ oxidation of the carbon substrate to form C-OH groups. Density functional theory calculations suggested that the flexible C-OH groups can form reversible hydrogen bonds with the oxygen evolution reaction intermediates, giving a bridge between elementary reactions to break the conventional scaling relationship.

Building Osteogenic Microenvironments with a Double-Network Composite Hydrogel for Bone Repair.

The critical factor determining the in vivo effect of bone repair materials is the microenvironment, which greatly depends on their abilities to promote vascularization and bone formation. However, implant materials are far from ideal candidates for guiding bone regeneration due to their deficient angiogenic and osteogenic microenvironments. Herein, a double-network composite hydrogel combining vascular endothelial growth factor (VEGF)-mimetic peptide with hydroxyapatite (HA) precursor was developed to build an osteogenic microenvironment for bone repair. The hydrogel was prepared by mixing acrylated ß-cyclodextrins and octacalcium phosphate (OCP), an HA precursor, with gelatin solution, followed by ultraviolet photo-crosslinking. To improve the angiogenic potential of the hydrogel, QK, a VEGF-mimicking peptide, was loaded in acrylated ß-cyclodextrins. The QK-loaded hydrogel promoted tube formation of human umbilical vein endothelial cells and upregulated the expression of angiogenesis-related genes, such as Flt1, Kdr, and VEGF, in bone marrow mesenchymal stem cells. Moreover, QK could recruit bone marrow mesenchymal stem cells. Furthermore, OCP in the composite hydrogel could be transformed into HA and release calcium ions facilitating bone regeneration. The double-network composite hydrogel integrated QK and OCP showed obvious osteoinductive activity. The results of animal experiments showed that the composite hydrogel enhanced bone regeneration in skull defects of rats, due to perfect synergistic effects of QK and OCP on vascularized bone regeneration. In summary, improving the angiogenic and osteogenic microenvironments by our double-network composite hydrogel shows promising prospects for bone repair.

Molecule-Enhanced Electrocatalysis of Sustainable Oxygen Evolution Using Organoselenium Functionalized Metal-Organic Nanosheets.

Remolding the reactivity of metal active sites is critical to facilitate renewable electricity-powered water electrolysis. Doping heteroatoms, such as Se, into a metal crystal lattice has been considered an effective approach, yet usually suffers from loss of functional heteroatoms during harsh electrocatalytic conditions, thus leading to the gradual inactivation of the catalysts. Here, we report a new heteroatom-containing molecule-enhanced strategy toward sustainable oxygen evolution improvement. An organoselenium ligand, bis(3,5-dimethyl-1H-pyrazol-4-yl)selenide containing robust C-Se-C covalent bonds equipped in the precatalyst of ultrathin metal-organic nanosheets Co-SeMON, is revealed to significantly enhance the catalytic mass activity of the cobalt site by 25 times, as well as extend the catalyst operation time in alkaline conditions by 1 or 2 orders of magnitude compared with these reported metal selenides. A combination of various in situ/ex situ spectroscopic techniques, ab initio molecular dynamics, and density functional theory calculations unveiled the organoselenium intensified mechanism, in which the nonclassical bonding of Se to O-containing intermediates endows adsorption-energy regulation beyond the conventional scaling relationship. Our results showcase the great potential of molecule-enhanced catalysts for highly efficient and economical water oxidation.

Three-dimensional biofabrication of nanosecond laser micromachined nanofibre meshes for tissue engineered scaffolds.

There is a high demand for bespoke grafts to replace damaged or malformed bone and cartilage tissue. Three-dimensional (3D) printing offers a method of fabricating complex anatomical features of clinically relevant sizes. However, the construction of a scaffold to replicate the complex hierarchical structure of natural tissues remains challenging. This paper reports a novel biofabrication method that is capable of creating intricately designed structures of anatomically relevant dimensions. The beneficial properties of the electrospun fibre meshes can finally be realised in 3D rather than the current promising breakthroughs in two-dimensional (2D). The 3D model was created from commercially available computer-aided design software packages in order to slice the model down into many layers of slices, which were arrayed. These 2D slices with each layer of a defined pattern were laser cut, and then successfully assembled with varying thicknesses of 100 µm or 200 µm. It is demonstrated in this study that this new biofabrication technique can be used to reproduce very complex computer-aided design models into hierarchical constructs with micro and nano resolutions, where the clinically relevant sizes ranging from a simple cube of 20 mm dimension, to a more complex, 50 mm-tall human ears were created. In-vitro cell-contact studies were also carried out to investigate the biocompatibility of this hierarchal structure. The cell viability on a micromachined electrospun polylactic-co-glycolic acid fibre mesh slice, where a range of hole diameters from 200 µm to 500 µm were laser cut in an array where cell confluence values of at least 85% were found at three weeks. Cells were also seeded onto a simpler stacked construct, albeit made with micromachined poly fibre mesh, where cells can be found to migrate through the stack better with collagen as bioadhesives. This new method for biofabricating hierarchical constructs can be further developed for tissue repair applications such as maxillofacial bone injury or nose/ear cartilage replacement in the future.

Responses of carbon dynamics to grazing exclusion in natural alpine grassland ecosystems on the QingZang Plateau.

In the context of "Carbon Emissions Peak" and "Carbon Neutrality", grazing exclusion (GE) has been applied widely to rehabilitate degraded grasslands and increase carbon sequestration. However, on the QingZang Plateau (QZP), the impacts of GE on the carbon dynamics of alpine grasslands are poorly understood, particularly at a regional scale. To fill this knowledge gap, we evaluated the responses of carbon sequestration to GE in different alpine grasslands across QZP by using meta-analysis. The effects of GE on ecosystem carbon fractions were dependent on GE duration, grassland types and climate factors. Specifically, our results indicated that GE had more obviously positive effects on carbon stock across the alpine meadow than the alpine steppe. However, when considering different GE duration, the longer duration of GE was more effective for increasing ecosystem carbon sequestration (R 2 = 0.52, P<0.0001) in the alpine steppe. Our results further demonstrated that annual mean precipitation (AMP) and temperature (AMT) began to dominate ecosystem carbon sequestration after three years of GE duration across the alpine meadow; and AMP was an important climate factor limiting ecosystem carbon sequestration (R 2 = 0.34, P<0.01) in the alpine steppe. In terms of plant carbon fraction, GE generated continuous positive effect (P<0.05) on aboveground biomass with the increased GE duration in the alpine meadow, while this positive effect disappeared after the 8th year of GE duration. And no positive effects were found on belowground biomass in the 11th year in alpine steppe. For soil organic carbon (SOC), there existed periodic fluctuations (increased and then decreased) on SOC in response to GE. For microbial biomass carbon, there were no obvious trends in response to GE duration. In general, we highlighted that the responses of different carbon fractions (plant-soil-microbe) to GE were non-uniform at spatial and temporal scales, thereby we should adopt different carbon management practices for sustainable development of different grasslands.

Flexible Cuprous Triazolate Frameworks as Highly Stable and Efficient Electrocatalysts for CO2 Reduction with Tunable C2 H4 /CH4 Selectivity.

Cu-based metal-organic frameworks have attracted much attention for electrocatalytic CO2 reduction, but they are generally instable and difficult to control the product selectivity. We report flexible Cu(I) triazolate frameworks as efficient, stable, and tunable electrocatalysts for CO2 reduction to C2 H4 /CH4 . By changing the size of ligand side groups, the C2 H4 /CH4 selectivity ratio can be gradually tuned and inversed from 11.8 : 1 to 1 : 2.6, giving C2 H4 , CH4 , and hydrocarbon selectivities up to 51 %, 56 %, and 77 %, respectively. After long-term electrocatalysis, they can retain the structures/morphologies without formation of Cu-based inorganic species. Computational simulations showed that the coordination geometry of Cu(I) changed from triangular to tetrahedral to bind the reaction intermediates, and two adjacent Cu(I) cooperated for C-C coupling to form C2 H4 . Importantly, the ligand side groups controlled the catalyst flexibility by the steric hindrance mechanism, and the C2 H4 pathway is more sensitive than the CH4 one.

High-performance quasi-solid-state flexible supercapacitors based on a flower-like NiCo metal-organic framework.

NiCo metal-organic framework (MOF) electrodes were prepared by a simple hydrothermal method. The flower-like NiCo MOF electrode exhibited an exciting potential window of 1.2 V and an excellent specific capacitance of 927.1 F g-1 at 1 A g-1. The flower-like NiCo MOF//activated carbon (AC) device delivered a high energy density of 28.5 W hkg-1 at a power density of 400.5 W kg-1 and good cycle stability (95.4% after 5000 cycles at 10 A g-1). Based on the flower-like NiCo MOF electrode, the asymmetric quasi-solid-state flexible supercapacitor (AFSC) was prepared and exhibited good capacitance retention after bending (79% after 100 bends and 64.4% after 200 bends). Furthermore, two AFSCs in series successfully lit up ten parallel red LED lights, showing great application potential in flexible and wearable energy storage devices.

Endothelialized microvessels fabricated by microfluidics facilitate osteogenic differentiation and promote bone repair.

In bone tissue engineering, vascularization is one of the critical factors that limit the effect of biomaterials for bone repair. While various approaches have been tried to build vascular networks in bone grafts, lack of endothelialization still constitutes a major technical hurdle. In this study, we have developed a facile technique to fabricate endothelialized biomimetic microvessels (BMVs) from alginate-collagen composite hydrogels within a single step using microfluidic technology. BMVs with different sizes could be readily prepared by adjusting the flow rate of microfluids. All BMVs supported perfusion and outward penetration of substances in the tube. Endothelial cells could adhere and proliferate on the inner wall of tubes. It was also found that the expression of CD31 and secretion of BMP-2 and PDGF-BB were higher in the rat umbilical vein endothelial cells (RUVECs) in BMVs than those cultured on hydrogel. When co-cultured with bone marrow mesenchymal stem cells (BMSCs), endothelialized BMVs promoted the osteogenic differentiation of BMSCs compared to those in acellular BMV group. In vivo, markedly enhanced new bone formation was achieved by endothelialized BMVs in a rat critical-sized calvarial defect model compared to those with non-endothelialized BMVs or without BMVs. Together, findings from both in vitro and in vivo studies have proven that endothelialized BMVs function to facilitate osteogenesis and promote bone regeneration, and therefore might present an effective strategy in bone tissue engineering. STATEMENT OF SIGNIFICANCE: In bone tissue engineering, limited vascularization is one of the critical factors that limit the effect of biomaterials for bone repair. In this study, we developed a facile technique to fabricate endothelialized biomimetic microvessels (BMVs) from alginate-collagen composite hydrogels within a single step using microfluidic technology. Both in vitro and in vivo studies have proven that endothelialized BMVs function to facilitate osteogenesis and promote bone regeneration, and therefore might present an effective strategy in bone tissue engineering.

Graphene-Like Hydrogen-Bonded Melamine-Cyanuric Acid Supramolecular Nanosheets as Pseudo-Porous Catalyst Support.

Behaving as structural protectors and electronic modulators, catalyst supports such as graphene derivatives are generally constructed by covalent bonds. Here, hydrogen-bonded ultrathin nanosheets are reported as a new type of catalyst support. Melamine (M) and cyanuric acid (CA) molecules self-assemble to form the graphite-like hydrogen-bonded co-crystal M-CA, which can be easily exfoliated by ultrasonic treatment to yield ultrathin nanosheets with thickness of ≈1.6 nm and high stability at pH = 0. The dynamic nanosheets form adaptive defects/pores in the synthetic process of CoP nanoparticles, giving embedded composite with high hydrogen evolution activity (overpotential of 66 mV at 10 mA cm-2 ) and stability. Computational calculations, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy unveil the electron modulation effects of the nanosheets. This pseudo-porous catalyst support also can be applied to other metal phosphides.

Enhanced Angiogenesis by 11ßHSD1 Blockage Is Insufficient to Improve Reperfusion Following Hindlimb Ischaemia.

Background: Critical limb ischaemia (CLI), which is estimated to affect 2 million people in the United States, reduces quality of life, is associated with high morbidity and mortality, and has limited treatment options. Direct stimulation of angiogenesis using proangiogenic growth factors has been investigated as a therapeutic strategy to improve reperfusion in the ischaemic leg. Despite positive outcomes in animal studies, there has been little success in clinical translation. This investigation addressed the hypothesis that angiogenesis could be stimulated indirectly in the ischaemic hindlimb by blocking 11ß-hydroxysteroid dehydrogenase 1 (11ßHSD1)-mediated reactivation of anti-angiogenic glucocorticoids. Method and Results: Corticosterone suppressed ex vivo angiogenesis in the mouse aortic ring assay. 11ßHSD1 deletion (Hsd11b1Del1/Del1) or pharmacological inhibition (with 300 nM UE2316) which block the reactivation of glucocorticoid (i.e., the conversion of 11-dehydrocorticosterone (11DHC) to bioactive corticosterone) significantly reduced 11DHC-induced suppression of angiogenesis. In a sponge implantation model, 11ßHSD1 deletion, but not pharmacological inhibition, enhanced inflammation-induced angiogenesis. By contrast, in the mouse hindlimb ischaemia model, post-ischaemic reperfusion and vascular density were not affected by either deletion or pharmacological inhibition of 11ßHSD1 in young or aged mice. 3D vascular imaging suggested that hind limb reperfusion in the 1st week following induction of ischaemia may be driven by the rapid expansion of collateral arteries rather than by angiogenesis. Conclusion: 11ßHSD1-mediated glucocorticoid reactivation suppressed angiogenesis ex vivo and in vivo. However, regulation of angiogenesis alone was insufficient to promote reperfusion in hindlimb ischaemia. Future investigation of post-ischaemic reperfusion should include other aspects of systemic vascular remodeling including arteriogenesis and collateral formation.

Recommendation of the best site based on the distribution pattern of extramuscular and intramusular nerves for gluteal muscle injection / Recomendación del mejor sitio para la inyección del músculo glúteo basado en el patrón de distribución de los nervios extramusculares e intramusculares

To reveal the extra- and intramuscular nerve distribution patterns of the gluteus maximus, medius, and minimus, and to provide guidance for gluteal muscle injection in order to avoid nerve injury. Ten adult and 10 child cadavers were used. The superior and inferior gluteal nerves innervating the gluteus maximus, medius, and minimus were dissected, exposed, and sutured in-situ on the muscle. The three gluteal muscles were removed, and the distribution patterns of the intramuscular nerves were revealed by modified Sihler's nerve staining. The nerve distribution pattern was returned to the corresponding position in the body, and the patterns in the four quadrants of the buttock were analyzed. There were 3-12 extramuscular nerve branches of the gluteus maximus, medius, and minimus. After entering the muscle, these nerve branches arborized and anastomosed to form an arc-shaped, nerve-dense zone. The nerve distribution was most dense in the inferomedial region of the superolateral quadrant and the inferolateral region of the superomedial quadrant of the buttocks. The nerve distribution was relatively dense in the inferolateral region of the superolateral quadrant, and the medial region of the inferomedial quadrant. An arc-shaped, nerve-sparse zone in the superolateral and superomedial quadrants near the lower iliac crest accounted for about two-fifths of the two quadrants' limits. The arc-shaped, nerve-sparse zone in the superolateral quadrant is the preferred injection site, and the superomedial quadrant near the lower iliac crest is also recommended as a gluteal intramuscular injection region, free from nerve injury.

El objetivo de este trabajo fue revelar los patrones de distribución nerviosa extramusculat e intramuscular de los músculos glúteo máximo, medio y mínimo y proporcionar orientación para la inyección en la región glútea con el propósito de evitar lesiones nerviosas. Se utilizaron diez cadáveres adultos y diez niños. Los nervios glúteos superior e inferior que inervan a los músculos glúteo máximo, medio y mínimo fueron disecados, expuestos y suturados in situ en el músculo. Se extirparon los tres músculos glúteos y se revelaron los patrones de distribución de los nervios intramusculares mediante la tinción nerviosa de Sihler modificada. El patrón de distribución nerviosa se devolvió a la posición correspondiente en el cuerpo y se analizaron los patrones en los cuatro cuadrantes de la región glútea. Se encontraron 3 a 12 ramos nerviosos extramusculares de los músculos glúteo máximo, medio y mínimo. Después de ingresar al músculo, estas ramas nerviosas se arborizaron y anastomizaron para formar una zona densamente nerviosa en forma de arco. La distribución nerviosa fue de mayor densidad en la región inferomedial del cuadrante superolateral y en la región inferolateral del cuadrante superomedial de la región glútea. La distribución nerviosa era relativamente densa en la región inferolateral del cuadrante superolateral y en la región medial del cuadrante inferomedial. Una zona en forma de arco en los cuadrantes superolateral y superomedial y con escasa inervación, cerca de la cresta ilíaca representaba una parte de los límites de los dos cuadrantes. La zona de poca inervación en forma de arco en el cuadrante superolateral es el sitio de inyección preferido, y el cuadrante superomedial próximo a la cresta ilíaca también se recomienda como una región de inyección intramuscular glútea, libre de lesión nerviosa.

On-surface isostructural transformation from a hydrogen-bonded network to a coordination network for tuning the pore size and guest recognition.

Rational manipulation of supramolecular structures on surfaces is of great importance and challenging. We show that imidazole-based hydrogen-bonded networks on a metal surface can transform into an isostructural coordination network for facile tuning of the pore size and guest recognition behaviours. Deposition of triangular-shaped benzotrisimidazole (H3btim) molecules on Au(111)/Ag(111) surfaces gives honeycomb networks linked by double N-H⋯N hydrogen bonds. While the H3btim hydrogen-bonded networks on Au(111) evaporate above 453 K, those on Ag(111) transform into isostructural [Ag3(btim)] coordination networks based on double N-Ag-N bonds at 423 K, by virtue of the unconventional metal-acid replacement reaction (Ag reduces H+). The transformation expands the pore diameter of the honeycomb networks from 3.8 Å to 6.9 Å, giving remarkably different host-guest recognition behaviours for fullerene and ferrocene molecules based on the size compatibility mechanism.

Non-3d Metal Modulation of a Cobalt Imidazolate Framework for Excellent Electrocatalytic Oxygen Evolution in Neutral Media.

Cobalt imidazolate frameworks are classical electrocatalysts for the oxygen evolution reaction (OER) but suffer from the relatively low activity. Here, a non-3d metal modulation strategy is presented for enhancing the OER activity of cobalt imidazolate frameworks. Two isomorphous frameworks [Co4 (MO4 )(eim)6 ] (M=Mo or W, Heim=2-ethylimidazole) having Co(eim)3 (MO4 ) units and high water stabilities were designed and synthesized. In different neutral media, the Mo-modulated framework coated on a glassy carbon electrode shows the best OER performances (1 mA cm-2 at an overpotential of 210 mV in CO2 -saturated 0.5 m KHCO3 electrolyte and 2/10/22 mA cm-2 at overpotential of 388/490/570 mV in phosphate buffer solution) among non-precious metal catalysts and even outperforms RuO2 . Spectroscopic measurements and computational simulations revealed that the non-3d metals modulate the electronic structure of Co for optimum reactant/product adsorption and tailor the energy of rate-determining step to a more moderate value.