Well-aligned Vertically Oriented ZnO Nanorod Arrays and their Application in Inverted Small Molecule Solar Cells.

This manuscript describes how to design and fabricate efficient inverted solar cells, which are based on a two-dimensional conjugated small molecule (SMPV1) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM), by utilizing ZnO nanorods (NRs) grown on a high quality Al-doped ZnO (AZO) seed layer. The inverted SMPV1:PC71BM solar cells with ZnO NRs that grew on both a sputtered and sol-gel processed AZO seed layer are fabricated. Compared with the AZO thin film prepared by the sol-gel method, the sputtered AZO thin film exhibits better crystallization and lower surface roughness, according to X-ray diffraction (XRD) and atomic force microscope (AFM) measurements. The orientation of the ZnO NRs grown on a sputtered AZO seed layer shows better vertical alignment, which is beneficial for the deposition of the subsequent active layer, forming better surface morphologies. Generally, the surface morphology of the active layer mainly dominates the fill factor (FF) of the devices. Consequently, the well-aligned ZnO NRs can be used to improve the carrier collection of the active layer and to increase the FF of the solar cells. Moreover, as an anti-reflection structure, it can also be utilized to enhance the light harvesting of the absorption layer, with the power conversion efficiency (PCE) of solar cells reaching 6.01%, higher than the sol-gel based solar cells with an efficiency of 4.74%.

Top Illuminated Hysteresis-Free Perovskite Solar Cells Incorporating Microcavity Structures on Metal Electrodes: A Combined Experimental and Theoretical Approach.

Further technological development of perovskite solar cells (PSCs) will require improvements in power conversion efficiency and stability, while maintaining low material costs and simple fabrication. In this Research Article, we describe top-illuminated ITO-free, stable PSCs featuring microcavity structures, wherein metal layers on both sides on the active layers exerted light interference effects in the active layer, potentially increasing the light path length inside the active layer. The optical constants (refractive index and extinction coefficient) of each layer in the PSC devices were measured, while the optical field intensity distribution was simulated using the transfer matrix method. The photocurrent densities of perovskite layers of various thicknesses were also simulated; these results mimic our experimental values exceptionally well. To modify the cavity electrode surface, we deposited a few nanometers of ultrathin MoO3 (2, 4, and 6 nm) in between the Ag and poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) layers provide hydrophobicity to the Ag surface and elevate the work function of Ag to match that of the hole transport layer. We achieved a power conversion efficiency (PCE) of 13.54% without hysteresis in the device containing a 4 nm-thick layer of MoO3. In addition, we fabricated these devices on various cavity electrodes (Al, Ag, Au, Cu); those prepared using Cu and Au anodes displayed improved device stability of up to 72 days. Furthermore, we prepared flexible PSCs having a PCE of 12.81% after incorporating the microcavity structures onto poly(ethylene terephthalate) as the substrate. These flexible solar cells displayed excellent stability against bending deformation, maintaining greater than 94% stability after 1000 bending cycles and greater than 85% after 2500 bending cycles performed with a bending radius of 5 mm.

Enhance the light-harvesting capability of the ITO-free inverted small molecule solar cell by ZnO nanorods.

The ITO-free inverted SMPV1:PC71BM solar cells with an Al doped ZnO (AZO) transparent electrodes are fabricated. The AZO thin film prepared by pulsed laser deposition (PLD) technique exhibits high transmission (>85%) and low sheet resistance (~30 Ω/sq) and the power conversion efficiency (PCE) of devices based on AZO electrode can reach around 4%. To further enhance the light harvesting of the absorption layer of solar cells, ZnO nanorods interlayer is grown on the AZO layer before the deposition the active layer. The absorption spectrums of devices under various conditions are also simulated by RCWA method to identify the optical saturation length of the ZnO nanorods. The PCE of ITO-free inverted small molecule solar cell improved with ZnO nanorods can reach 6.6%.

Size and morphology dependent evolution of resonant modes in ZnO microspheres grown by hydrothermal synthesis.

We report the correlation between inner morphology, size and whispering gallery mode (WGM) behavior in ZnO microspheres (MSs) grown by hydrothermal method. WGMs in different ZnO microspheres with diameters in the range of 2 - 6 µm were analyzed by a modified refractive index (MRI) scheme. We found that the size dependence of WGMs in our system is more complicated than others because of the appearance of porosity inside each sphere. Such features might account for the refractive index change and peak shift. Despite that, our MRI scheme can detect such complex features and reproduce universal relations between all important quantities of a microsphere WGM resonator.