Bioinspired porous three-coordinated single-atom Fe nanozyme with oxidase-like activity for tumor visual identification via glutathione.

Inspired by structures of natural metalloenzymes, a biomimetic synthetic strategy is developed for scalable synthesis of porous Fe-N3 single atom nanozymes (pFeSAN) using hemoglobin as Fe-source and template. pFeSAN delivers 3.3- and 8791-fold higher oxidase-like activity than Fe-N4 and Fe3O4 nanozymes. The high catalytic performance is attributed to (1) the suppressed aggregation of atomically dispersed Fe; (2) facilitated mass transfer and maximized exposure of active sites for the created mesopores by thermal removal of hemoglobin (2 ~ 3 nm); and (3) unique electronic configuration of Fe-N3 for the oxygen-to-water oxidation pathway (analogy with natural cytochrome c oxidase). The pFeSAN is successfully demonstrated for the rapid colorimetric detection of glutathione with a low limit of detection (2.4 nM) and wide range (50 nM-1 mM), and further developed as a real-time, facile, rapid (~6 min) and precise visualization analysis methodology of tumors via glutathione level, showing its potentials for diagnostic and clinic applications.

Regulation of frustrated Lewis pairs on CeO2 facilitates tandem transformation of styrene and CO2.

The frustrated Lewis pair (FLP) site of (Ce, Ce)-O on the CeO2(110) surface undergoes reconstruction to form (La, Ce)-O upon La-doping. The FLP site of (La, Ce)-O with the tailored local Lewis acid-base property and increased spatial distance between the Lewis acid and base facilitates the tandem transformation of styrene and CO2 through the weakened adsorption of CO2 while maintaining activation.

Grand Canonical Ensemble Modeling of Electrochemical Interfaces Made Simple.

Grand canonical ensemble (GCE) modeling of electrochemical interfaces, in which the electrochemical potential is converged to a preset constant, is essential for understanding electrochemistry and electrocatalysis at the electrodes. However, it requires developing efficient and robust algorithms to perform practical and effective GCE modeling with density functional theory (DFT) calculations. Herein, we developed an efficient and robust fully converged constant-potential (FCP) algorithm based on Newton's method and a polynomial fitting to calculate the necessary derivative for DFT calculations. We demonstrated with the constant-potential geometry optimization and Born-Oppenheimer molecular dynamics (BOMD) calculations that our FCP algorithm is resistant to the numerical instability that plagues other algorithms, and it delivers efficient convergence to the preset electrochemical potential and renders accurate forces for updating the nuclear positions of an electronically open system, outperforming other algorithms. The implementation of our FCP algorithm enables flexibility in using various computational codes and versatility in performing advanced tasks including the constant-potential enhanced-sampling BOMD simulations that we showcased with the modeling of the electrochemical hydrogenation of CO, and it is thus expected to find a wide spectrum of applications in the modeling of chemistry at electrochemical interfaces.

Single-atom catalysis enabled by high-energy metastable structures.

Owing to limited degrees of freedom, the active sites of stable single-atom catalyst (SAC) often have one structure that is energetically much lower than other local-minimum structures. Thus, the SAC adopts one lowest-energy structure (LES) with an overwhelmingly larger proportion than any other high-energy metastable structure (HEMS), and the LES is commonly assumed to be solely responsible for the catalytic performance of an SAC. Herein, we demonstrate with SACs anchored on CeO2 that the HEMS of an SAC, even though its proportion remains several orders of magnitude lower than the LES throughout the catalytic reaction, can dictate catalysis with extraordinary activity arising from its unique coordination environment and oxidation state. Thus, we unravel the key role of HEMS-enabled catalysis in single-atom catalysis, which shakes the common assumption in the studies of SACs and urges new developments in both experiment and theory to identify and exploit catalysis via HEMSs.

Recent progress of theoretical studies on electro- and photo-chemical conversion of CO2 with single-atom catalysts.

The CO2 reduction reaction (CO2RR) into chemical products is a promising and efficient way to combat the global warming issue and greenhouse effect. The viability of the CO2RR critically rests with finding highly active and selective catalysts that can accomplish the desired chemical transformation. Single-atom catalysts (SACs) are ideal in fulfilling this goal due to the well-defined active sites and support-tunable electronic structure, and exhibit enhanced activity and high selectivity for the CO2RR. In this review, we present the recent progress of quantum-theoretical studies on electro- and photo-chemical conversion of CO2 with SACs and frameworks. Various calculated products of CO2RR with SACs have been discussed, including CO, acids, alcohols, hydrocarbons and other organics. Meanwhile, the critical challenges and the pathway towards improving the efficiency of the CO2RR have also been discussed.

Surface Water as an Initial Proton Source for the Electrochemical CO Reduction Reaction on Copper Surfaces.

We have employed in situ electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) and density functional theory (DFT) calculations to study the CO reduction reaction (CORR) on Cu single-crystal surfaces under various conditions. Coadsorbed and structure-/potential-dependent surface species, including *CO, Cu-Oad , and Cu-OHad , were identified using electrochemical spectroscopy and isotope labeling. The relative abundance of *OH follows a "volcano" trend with applied potentials in aqueous solutions, which is yet absent in absolute alcoholic solutions. Combined with DFT calculations, we propose that the surface H2 O can serve as a strong proton donor for the first protonation step in both the C1 and C2 pathways of CORR at various applied potentials in alkaline electrolytes, leaving adsorbed *OH on the surface. This work provides fresh insights into the initial protonation steps and identity of key interfacial intermediates formed during CORR on Cu surfaces.

Ce-hydroxamate metal-organic frameworks for photocatalytic H2 generation.

Exploring the rich coordination chemistry of Ce, here we report two new entries in the emerging category of hydroxamate-based metal-organic frameworks (MOFs). The two Ce-hydroxamate MOFs exhibited different band structures and photoelectrochemical properties based on their respective coordinative environments and overall structures, leading to varied H2 generation performances.

Insights into the Interfacial Lewis Acid-Base Pairs in CeO2 -Loaded CoS2 Electrocatalysts for Alkaline Hydrogen Evolution.

Despite the known efficacy of CeO2 as a promoter in alkaline hydrogen evolution reaction (HER), the underlying mechanism of this effect remains unclear. CoS2 , a pyrite-type alkaline HER electrocatalyst, suffers from sluggish HER kinetics and severe catalyst leaching due to its weak water dissociation kinetics and oxygen-related corrosion. Herein, it is demonstrated that the interfacial Lewis acid-base Ce∙∙∙S pairs in CeO2 -loaded CoS2 effectively improve the catalytic activity and durability. In CeO2 -loaded CoS2 nanowire array electrodes, these interfacial Lewis acid-base Ce∙∙∙S pairs with unique electronic and structural configurations efficiently activate water adsorptive dissociation and kinetically accelerate hydrogen evolution, delivering a low overpotential of 36 mV at 10 mA cm-2 in alkaline media. Such Ce∙∙∙S pairs also weaken O2 adsorption on CoS2 , leading to undecayed activity over 1000 h. These findings are expected to provide guidance for the design of CeO2 -based electrocatalysts as well as other hybrid electrocatalysts for water splitting.

Spatial intimacy of binary active-sites for selective sequential hydrogenation-condensation of nitriles into secondary imines.

Precisely controlling the spatial intimacy of multiple active sites at sub-nanoscale in heterogeneous catalysts can improve their selectivity and activity. Herein, we realize a highly selective nitrile-to-secondary imine transformation through a cascaded hydrogenation and condensation process by Pt1/CoBOx comprising the binary active sites of the single-dispersed Pt and interfacial Lewis acidic B. Atomic Pt sites with large inter-distances (>nanometers) only activate hydrogen for nitrile hydrogenation, but inhibit condensation. Both adjacent B…B on CoBOx and neighbouring Pt…B pairs with close intimacy of ~0.45 nm can satisfy the spatial prerequisites for condensation. Mechanism investigations demonstrate the energetically favorable pathway occurred on adjacent Lewis acidic B sites through the nitrile adsorption (acid-base interaction), hydrogenation via hydrogen spillover from Pt to B sites and sequential condensation. Strong intermolecular tension and steric hindrance of secondary imines on active sites lead to their effective desorption and thereby a high chemoselectivity of secondary imines.

Interfacial Frustrated Lewis Pairs of CeO2 Activate CO2 for Selective Tandem Transformation of Olefins and CO2 into Cyclic Carbonates.

Effective activation of CO2 is a prerequisite for efficient utilization of CO2 in organic synthesis. Precisely controlling the interfacial events of solids shows potential for activation. Herein, defect-enriched CeO2 with constructed interfacial frustrated Lewis pairs (FLPs, two adjacent Ce3+···O2-) effectively activates CO2 via the interactions between C/Lewis basic lattice O2- and the two O atoms in CO2/two adjacent Lewis acidic Ce3+ ions. Selective cyclic carbonate production from a catalytically tandem protocol of olefins and CO2 is used to demonstrate FLP-inspired CO2 activation.

Towards highly active Pd/CeO2 for alkene hydrogenation by tuning Pd dispersion and surface properties of the catalysts.

Extensive applications of noble metals as heterogeneous catalysts are limited by their global reserve scarcity and exorbitant price. Identifying the intrinsic active nature of a catalyst benefits the designing of catalysts with trace amounts of noble metals; these catalysts display better or comparable overall catalytic efficiency than their heavily loaded counterparts. Herein, systematic studies on Pd dispersion and surface properties of a series of Pd/CeO2 catalysts for styrene hydrogenation showed that high Pd dispersion and surface abundant defects of the catalysts are essential to realize superior activity. Highly dispersed subnanometric Pd clusters on porous nanorods of ceria with a large surface Ce3+ fraction of 27.4%, high Pd dispersion of 73.6%, and low Pd loading of 0.081 wt% delivered a very large turnover frequency of 103 233 h-1 based on each exposed Pd atom for styrene hydrogenation at 1.0 MPa H2 and 30 °C. Experimental data, kinetic analysis, and density functional theory calculations revealed that the highly dispersed Pd shows a low affinity for styrene and provides more exposed Pd sites for hydrogen activation. The surface abundant defects (oxygen vacancy) of Pd/CeO2 catalysts can enrich the electron density of Pd, improve its capability for H2 dissociation and lower the affinity of styrene for Pd.

Highly Efficient and Robust Nickel Phosphides as Bifunctional Electrocatalysts for Overall Water-Splitting.

To search for the efficient non-noble metal based and/or earth-abundant electrocatalysts for overall water-splitting is critical to promote the clean-energy technologies for hydrogen economy. Herein, we report nickel phosphide (NixPy) catalysts with the controllable phases as the efficient bifunctional catalysts for water electrolysis. The phases of NixPy were determined by the temperatures of the solid-phase reaction between the ultrathin Ni(OH)2 plates and NaH2PO2·H2O. The NixPy with the richest Ni5P4 phase synthesized at 325 °C (NixPy-325) delivered efficient and robust catalytic performance for hydrogen evolution reaction (HER) in the electrolytes with a wide pH range. The NixPy-325 catalysts also exhibited a remarkable performance for oxygen evolution reaction (OER) in a strong alkaline electrolyte (1.0 M KOH) due to the formation of surface NiOOH species. Furthermore, the bifunctional NixPy-325 catalysts enabled a highly performed overall water-splitting with ∼100% Faradaic efficiency in 1.0 M KOH electrolyte, in which a low applied external potential of 1.57 V led to a stabilized catalytic current density of 10 mA/cm(2) over 60 h.

Hollow Fluffy Co3O4 Cages as Efficient Electroactive Materials for Supercapacitors and Oxygen Evolution Reaction.

Nano-/micrometer multiscale hierarchical structures not only provide large surface areas for surface redox reactions but also ensure efficient charge conductivity, which is of benefit for utilization in areas of electrochemical energy conversion and storage. Herein, hollow fluffy cages (HFC) of Co3O4, constructed of ultrathin nanosheets, were synthesized by the formation of Co(OH)2 hollow cages and subsequent calcination at 250 °C. The large surface area (245.5 m2 g(-1)) of HFC Co3O4 annealed at 250 °C ensures the efficient interaction between electrolytes and electroactive components and provides more active sites for the surface redox reactions. The hierarchical structures minimize amount of the grain boundaries and facilitate the charge transfer process. Thin thickness of nanosheets (2-3 nm) ensures the highly active sites for the surface redox reactions. As a consequence, HFC Co3O4 as the supercapacitor electrode exhibits a superior rate capability, shows an excellent cycliability of 10,000 cycles at 10 A g(-1), and delivers large specific capacitances of 948.9 and 536.8 F g(-1) at 1 and 40 A g(-1), respectively. Catalytic studies of HFC Co3O4 for oxygen evolution reaction display a much higher turnover frequency of 1.67×10(-2) s(-1) in pH 14.0 KOH electrolyte at 400 mV overpotential and a lower Tafel slope of 70 mV dec(-1). HFC Co3O4 with the efficient electrochemical activity and good stability can remain a promising candidate for the electrochemical energy conversion and storage.

Three sulphated polysaccharides isolated from the mucilage of mud snail, Bullacta exarata philippi: characterization and antitumour activity.

Three sulphated polysaccharides, coded as BEMPA, BEMPB(1), BEMPB(2), were extracted from the mucilage of mud snail of Bullacta exarata and purified by DEAE-cellulose ion-exchange and size-exclusion chromatography. Structural analysis of purified polysaccharides by chemical and biochemical methods revealed BEMPA was a high (1→3,4)-linked mannose-containing polysaccharide with molecular weight of 22,977 Da. BEMPB(1), with molecular weight of 64,117 Da, was a high (1→3)-linked arabinose-containing polysaccharide. BEMPB(2) was mainly composed of (1→3,4)-linked mannose with molecular weight of 47,507Da. The comparison between sulphated polysaccharides and their desulphated products showed that sulphate substitutions of BEMPB(1) were deduced to be at the C-3 of (1→4)-linked mannose, while sulphate substitutions of BEMPA and BEMPB(2) were at C-4 of (1→3)-linked mannose. Furthermore, BEMPA exhibited highest inhibitory effects on growth of B-16 melanoma cells, and IC(50) were 31.1 µg/mL.