RESUMO
The safety performance and structural stiffness of a rim, which is the main load-bearing structure of the loader during operation, influence the overall performance, stability, and braking capabilities of the machine. In the industry, researchers are currently pursuing lightweight and high-strength rims as a primary objective. A low weight not only enhances machinery fuel efficiency but also aligns with societal demands for sustainable development, energy conservation, and emission reduction. In this article, multiobjective optimization analysis on rims composed of three different materials is performed, and the relationships between various optimization parameters and target parameters are established using the results of response surface construction. Multiobjective genetic algorithms are utilized to derive various optimization plans, which are subsequently evaluated through static analysis, fatigue analysis, and weight loss analysis. The final optimization plan is determined based on the calculation results while considering production costs. Field tests are conducted on the optimized rims under various working conditions to verify the test results, evaluate the reliability of the finite element analysis results, and confirm the safety of the optimized rim.
RESUMO
Objective To explore the difference of psychological state and the change of psycho logical state between mastectomy group for the purpose of changing gender identity and breast reduction surgery group for the purpose of improving physical beauty.Methods The psychological evaluation scale of three layers and twelve dimensions was used to evaluate the psychological status of 24 patients who underwent clinical breast masculine surgery and aesthetic breast reduction before and after operation.The psychological characteristics between the two groups before and after operation were compared and analyzed.Data analysis was carried out through Stata 13.0 software package.Results There were significant differences in depression factor,anxiety factor and obsessive compulsive symp tom factor in the aesthetic breast reduction group before and after operation (t=2.194,2.183,2.090;P=0.039,0.040,0.048,P<0.05).There were significant differences in depression factor,anxiety factor,obsessive-compulsive symptom factor,bullying factor,psychological self,physical self and social self before and after mastectomy (t=4.188,3.730,2.484,2.570,5.898,3.531,3.162,P=0.000,0.001,0.021,0.018,0.000,0.002,0.005,P<0.05).There were significant differ ences in depression,anxiety,psychoticism,obsessive-compulsive symptoms,psychological self,physiological self and social self between mastectomy group and aesthetic mastectomy group before operation.(t=2.629,4.081,2.097,4.246,5.419,2.600,2.545;P=0.015,0.001,0.048,0.000,0.000,0.016,0.018,P<0.05).There was significant difference in postoperative depression,anxiety and obsessive-compulsive symptoms between the mastectomy group and the aesthetic mastectomygroup (t=2.117,2.170,3.764;P=0.046,0.041,0.001,P<0.05).Conclusions Plastic surgeons should pay attention to the psychological status and personality characteristics of different beauty seekers and give psychological guidance,which is of great significance to improve the medical experience and surgical effect of the beauty seekers.
RESUMO
Objective@#To investigate the histological and biomechanical changes of rabbit ear cartilage induced by long pulse width 1064 nm Nd: YAGlaser.@*Methods@#Seven New Zealand rabbits weighing 2.0-2.5 kg, male, 4-6 months old were selected. For a self-control, the right ear was irradiated by laser and the left ear was the normal control group. Each rabbit ear was divided into 3 cm × 1 cm, three 2 cm × 1 cm and 1 cm× 1 cm experimental area. After the experimental area of the laser irradiation group was irradiated by long pulse width 1064 nm Nd: YAG laser, Three pieces of 2 cm × 1 cm cartilage in each ear of the experimental rabbits were immediately cut and stained with HE, Sirius red and Masson to observe the histological changes of chondrocytes. The 3 cm × 1 cm and 1 cm× 1 cm cartilage of each rabbit ear was cut for biomechanical examination, and the changes of biomechanical properties such as tension, fracture, elastic modulus and compression of rabbit ear cartilage were observed immediately after the operation.@*Results@#Histological observation showed that the chondrocytes became small, the matrix was stained deeply, the refraction was obvious/evident and the collagen was relatively increased. After being irradiated by long pulse width 1064 nm Nd: YAG laser, the peak tensile stress, tensile elastic modulus, tensile fracture load, compressive stress peak, compressive elastic modulus and compressive failure load of rabbit ear cartilage in laser irradiation group were (5.22 ±0.80) MPa, (42.40 ±9.78) MPa, (22.86 ±4.85) N, (16.04 ±5.57) MPa, (28.71 ±13.97) MPa, (1 211.63 ±427.86) N. All of them were smaller than those of the control group[(6.07±0.64) MPa, (48.44±6.30) MPa, (26.94±4.19) N, (25.12±9.10) MPa, (45.30±19.24) MPa, (1 962.83±896.71) N], and the difference was statistically significant (P<0.05).@*Conclusions@#After the operation of long pulse width 1064 nm Nd: YAG laser, the stress of rabbit ear cartilage resisting elastic deformation is reduced, the shape is easier to change, and the remodeling effect is more stable.
RESUMO
Artificial intelligence (AI) technology has advanced rapidly in the field of medicine in recent five years. This paper summarizes the progress of the research and application of AI in plastic surgery in the era of big data and describes the differences from the previous scientific research. Next, it discusses the main problems existing and the ways to carry out AI research. Finally it proposes to unify the data standard through the deep integration of medical and engineering professionals, establish big data centers, and form strategic cooperative relationships with AI research enterprises to carry out long-term research. At the same time, it is crucial to formulate strategies and method for extensive scientific research collaboration. The paper calls for the clinical application of the AI research result to establish a virtuous circle. Applying artificial intelligence in the field of plastic surgery ultimately promotes the development of the discipline.
RESUMO
Objective@#To study the characteristics of maxillofacial contour data of male young adult group and to compare the differences between data acquired by structured light three-dimensional scanning and CT.@*Methods@#From November 2017 to December 2017, 120 healthy male volunteers from the General Hospital of Southern Theatre Command aged 20 to 30 years, weighed 55-85 kg, and with the height between 160-185 cm were selected. Three groups were carried out according to the concentrative trend of BMI: 17≤BMI<22(group A), 22≤BMI<24(group B), 24≤BMI<29(group C). Structured light scanning: Each volunteer underwent facial scanning and measurement by 3D medical simulation system and 3D precision digital shaping software in the system respectively. CT scanning: CT was also used for whole skull scanning and the harvested 3D data was calculated and measured with Mimics 13.0 and Geomagic Studio 2013 software. Three groups of measurements were statistically compared between groups using Paired-t sample test, One-way ANOVA or Wilcoxon rank sum test. P<0.05 indicates statistical difference.@*Results@#The result of structured light three-dimensional scanning data showed that the horizontal circumference of supraauricular base point (point A), tragus point (point B), earlobe point (point C) and midpoint of lip plane (point D) in group A were (276.70±11.71) mm, (286.06±7.69) mm, (256.53±11.01) mm, (244.89±11.85) mm. The values in group B were (289.22±8.91) mm, (301.57 ±3.61) mm, (270.68±11.85) mm and (257.02±11.76) mm. The values in group C were (297.53±5.70) mm, (314.12±4.73) mm, (278.29±9.04) mm and (260.21±17.33) mm. The results of CT three-dimensional reconstruction model: the horizontal circumference of superior ear base point, tragus point, ear lobe point and lip plane midpoint in group A were (274.55±9.98) mm, (283.33±7.35) mm, (260.32±12.64) mm, (241.97±11.94) mm. The values in group B were (286.40±7.29) mm, (300.28±2.73) mm, (274.89±7.91) mm and (253.84±12.04) mm. The values in group C were (293.27±8.18) mm, (310.38±8.43) mm, (283.41±10.94) mm and (254.67±13.71) mm. There was no significant difference between the two collection method (P>0.05). The statistical result of structured light three-dimensional scanning image data showed that there were significant differences between group A and group B, group A and group C, group B and group C(t=-5.798 6, -8.109 0, -4.044 3; P=0.000 0, 0.000 0, 0.000 1). By the circumference of horizontal plane at point B, there were significant differences between group A and group B, group A and group C, group B and group C(t=-12.190 0, -16.206 7, -12.054 2; P=0.000 0, 0.000 0, 0.000 0). There were significant differences in horizontal plane circumference between group A and group B, group A and group C, group B and group C(t=-6.078 8, -8.346 5, -2.686 5; P=0.000 0, 0.000 0, 0.009 2). Through the horizontal plane circumference of point C, there were significant differences between group A and group B, group A and group C, group B and group C. Through the horizontal plane circumference of point D, there were significant differences between group A and group B, group A and group C(t=-5.025 1, -4.495 4; P=0.000 0, 0.000 0). The difference between group B and group C was not statistically significant (t=-0.886 6, P=0.378 6). The statistical result of CT scanning reconstruction model data showed that there were significant differences in horizontal plane circumference between group A and group B, group A and group C, group B and group C(t=-6.520 5, -7.924 5, -3.495 7; P=0.000 0, 0.000 0, 0.000 9). According to the horizontal plane circumference of point B, there were significant differences between group A and group B, group A and group C, group B and group C. There were significant differences in horizontal plane circumference between group A and group B, group A and group C, group B and group C. By the circumference of horizontal plane at point C, there were significant differences between group A and group B, group A and group C, group B and group C(t=-6.596 1, -7.622 4, -3.637 7; P=0.000 0, 0.000 0, 0.000 6). According to the horizontal plane circumference of point D, there were significant differences between group A and group B, group A and group C (t=-4.846 0, -4.085 3; P=0.000 0, 0.000 1). The difference between group B and group C was not statistically significant (t=-0.254 2; P=0.800 1).@*Conclusions@#The three-dimensional data of the maxillofacial region of male young adults has a correlation with the BMI. Structured light three-dimensional scanning is a more accurate and convenient way to collect three-dimensional data of maxillofacial contour than CT scanning, which is helpful to improve the efficiency of clinical and scientific research.
RESUMO
Congenital ear deformities are common diseases in infants and can be effectively corrected by ear molding. However, the current knowledge about the auricular othosis is still insufficiency. As the new type of ear correction system has been produced, non-surgical correction of ear deformities is increasingly popular. To promote and standardize its clinical application, here, we reviewed the advanced publications associated with neonatal ear molding, focusing on auricular deformities classification, incidence rate, self-healing rate, as well as pathological mechanism. The review also included various auricular othosis materials, treatment opportunity, cure rate and complications.
RESUMO
With the rapid development of digital technology, digital medicine has seen an upsurge in the 21st century, thus entering the era of precision and digital medicine. This article mainly introduces the application of digital technologies in plastic and reconstructive surgery, such as three-dimensional scan imaging, surgical navigation, microsurgical navigation, 3D printing, etc. In the era of big data, digital technologies have been widely applied in the preoperative design, navigation during surgery and post-operative evaluation of plastic surgery. Naturally the digital teams and societies of plastic surgery have come into being. Additionally this article puts forward the new prospects for more extensive applications of digital technologies such as surgical robots, 3D printing of prosthetic implants, and virtual reality. We believe that when the professionals who master artificial intelligence algorithms collaborate with the experts who have deep insight into medicine, the digital technologies can be applied better to the field of cosmetic surgery. This is our main task at present and the final goal.
RESUMO
Objective@#To observe the efficacy of 755 nm picosecond laser and intense pulsed light in the treatment of facial freckles.@*Methods@#Sixty-six outpatients with freckles were randomly divided into two groups. They were treated with 755 nm picosecond laser (P755 nm) and intense pulsed light (IPL), respectively. Frequent freckles were analyzed before treatment and at 4 week after treatment.@*Results@#Both treatments had good curative effect, but the P755 nm group had better efficacy than the IPL group with significant difference.@*Conclusions@#755 nm picosecond laser and IPL can treat freckles very well, and P755 nm group is superior to IPL.
RESUMO
Objective To investigate the application of noninvasive correction of congenital auricle defor-mity,and to analyze the cure rate and the causes of incidence of complications. Methods From January 2015 to December 2016,33 patients with unilateral or bilateral congenital auricle deformities were treated with non-surgi-cal correction technique in the Plastic Surgery Department of Guangzhou General Hospital. When the treatment was completed,the VAS score was used to assess the satisfaction of the patient's parents. Results From January 2015 to December 2016,33 patients(53 ears)received noninvasive treatment of the ear deformity correction system. The average age of the patients was(63.5 ± 41.3)days,the average treatment time was(41.6 ± 15.4)days,and the average parental satisfaction was 3.76 ± 0.93(total score:5 points). Significant difference was observedin auri-cle morphology data between pre- and post- treatment ,except for cranioauricular angle(P < 0.05). Conclusions In this study,the cure rate for non-surgical correction was good,however,the satisfaction of treatment decreased with age.The most common complication of treatment was auricle skin damage. The reasons of causing complica-tions maybe the age-induced reduction of ear cartilage elasticity which brought great pressure on the ear ,and the increase of the treatment time.
RESUMO
Objective This single-center prospective,case-controlled study was carried out to investigate clinical effects on patients with aging face who underwent facial autologous fat grafting with platelet-rich plasma (PRP).Methods Thirty patients with facial sagging or partial depression and requiring autologous fat grafting were randomly selected for the study.Photograph and 3D scanning were taken before and 3-month after the operation.Patient and physician satisfaction was rated using Visual Analogue Scale (VAS) ranging from 1 (most unsatisfactory) to 10 (most satisfactory)3 months after the operation.Statistical difference between the patient and physician satisfactory scores was analyzed.Results The average physician VAS score was 7.9 ± 1.0 while the average patient VAS score was 8.0±1.2.The scores between two groups had no significant difference (P> 0.05).Four patients developed bruising and swelling postoperatively that disappeared less than 7 days later.There was no feed back of serious complications from patients.Further investigation of patients with scores less than 7 showed the main reason of low patient satisfaction was that the improvement of facial depression did not meet the requirements of the patient,and fat absorption led to unsatisfactory filling.Conclusions The high satisfactory scores indicate good aesthetic result of facial autologous fat grafting with PRP.PRP may lead to higer survival rate of fat and satisfaction.
RESUMO
Objective To provide structure and function applied anatomical of auricle stabilizing system for plastic and reconstruction.Methods Twelve cases fresh ears from adult head specimen,to dissect the skin,muscle fascia system and cartilage,to observe nerve,blood vessel and structure of cartilage.Results The structure of auricle Including the perichondrium,auricle cartilage,muscle and ligament.There was a rich blood supply for auricle stabilize system.The mainly blood supply come from posterior auricular artery diameter was 1.2 ± 0.2 cm and superficial temporal artery diameter was 2.6 ± 0.3 mm.Vein accompanying with the same name.Lymphatic flow in the area of superficial muscle fascia.Conclusion The blood supply of posterior auricular artery and superficial temporal artery play a crucial role in auricle repair and reconstruction.The main structure of stable system was elastic cartilage.Auricle cartilage and muscle play an important role in the microsurgery of auricle cartilage morphology and location.
RESUMO
Objective To explore the clinical methodology and effects of correction of secondary unilateral cleft lip nasaldeformity by anatomical restoration and cartilage of nasal septum.Methods With the Goodman's incision in the columella and nasal vestibule,we cut out the cartilage of nasal septum and built a new support structure of tip to reshape the nasal shape after the adequate anatomical restoration under the magnifier of 2.5 times.Results The operation corrected alanasi collapse skewed columella and nostrils symmetry,etc.21 cases were treated and followed up for a month and fifteen months,showing stablized effect with columella centerno alanasi collapse,symmetric nostril and no recurrence.Conclusions On the base of nasal anatomy,a good therapeutic effect has been archeived by the adequate anatomical restoration,cutting out the cartilage of nasal septum and builting a new support structure of tip to reshape the nasal shape.
RESUMO
Objective To quantitatively evaluate the efficacy of radiofrequency technology in the facial rejuvenation. Methods Six Chinese female volunteers received five times treatments at 4 days interval with the Slimager radiofrequency device on one side of their face, the other side as a control. After that, we evaluated the clinical efficacy by patients, clinicians, and professional measuring Angel Software, respectively. Results The results showed that the skin looseness and rhytides improved significantly after treatment (20 days). Patients and doctors were satisfied with the efficacy. Data measurements showed that the face levitated by 2.4 mm, the nasolabial fold levitated by 2.2 mm after the treatment. Conclusions The radiofrequency technology is a safe, non-invasive and non-surgical treatment method, which is effective for tightening skin, eliminating rhytides, and rejuvenating face.
RESUMO
ObjectiveTo explore clinical application of selecting flap by using of digital technique in treatment of hemifacial atrophy.MethodsSeven patients with hemifacial atrophy were selected,preoperative CT angiography was performed,deformity and flap three-dimensional reconstruction and design bone and soft tissues using Mimics 14.3 software, latissimus muscular flap or femur anterolateral flap were selected,according to tilt donor area and recipient area blood vessel diameter. Defect model were printed using rapid prototyping. ResultsHemifacial atrophy had a good postoperative shape,and the flaps survived in all the 7 cases.Follow-up 3 years,the flaps look well and the patients get expecting results. ConclusionsThe digital technique was a relatively useful tool that can assist surgeons with reconstruction of the flap,and accurate marking of the extent of the flap to be harvested.Therefore avoiding intraoperative injuries to the blood vessels to better survival of the flaps.
RESUMO
Objective To provide structure and function applied anatomical of nasal sub-units for plastic and reconstruction. Methods Twelve cases fresh nose from adult head specimen,to dissect the skin,muscle fascia system, cartilage and bone,to observe and digiital measure nerve, blood vessel and ligament between cartilage. Results The thinnest skin in the point of bone and cartilage junction,the thickest parts in the nasion and the supratip breakpoint.Nose contours include of the skin,cartilage,bones and vascular muscle fascia system;Nasal subunit can be divided into nasion area,nasal dorsum area, nasal tip area,nasal ala area and nasal columella area;Nasal valve was a important anatomic part of bremh.The nasal lateral osteotomy of maxilla can change 2 mm height and width of the nasal bone;Lower lateral cartilage and upper nasal cartilage connection can be separated 6~8 mm. Curvature changes in the crura intermedium of alar cartilage Can raise nasal tip 2 mm. Extent of septal cartilage was 15 mm×20 mm,thickness was 1 mm.The mainly blood supply come from facial artery and ophthalmic artery. Vein accompanying with the same name.Lymphatic flow in the area of superficial muscle fascia. Concision Nasal bone lateral osteotomy can raise up bridge of the nose.To lengthen and highten nasal tip based on the complete strip technique of lower lateral cartilage and upper lateral,and to change angel of medial crus and middle crus of lower lateral cartilage by suture rotation.Nasal skin is rich in artery and vein,so much as four networks.Because the syndrome of nasal contraction deformation occurred more and more recently we must to avoid the vascular network injury when operation, and the anatomical level should be give more noted.
RESUMO
@#Objective To build a method of mandible 3D model to measure and analysis, then to finish the operation simulation, providing anatomic data to avoiding the complicafious of mandible osteotomy. Methods Using CT data to reconstruct 3D model of mandible with blood vessel and bone, then using Simpleware to measure and analysis, and using Freeform system and an incision method of Boolean to simulation mandible osteotomy safely. Re, tits It was possible to use CT data to rebuild 3D model for 3D measure and analysis for operation simulation. The inferior alveolar artery and never were the main tiasues which went through the madibhilar. The length of mandibular foramen to anterior minus was (19.13±0.66) ram,and the ones to posterior ramus was (18.96± 0.64)mm. The angle of the mandible was (109.70±4.67)°. The rages of the remus for safe operation was (12.62±0.28)mm, and the safe rages about angle of the body and bottom of the mandible was (22.30±4.67)°. There were obvious differences from children to the aged in the mandible physiological and anatomic study. We can use Freeform system to simulate the operation on 3D model. Conclusion It is a new method to build 3D model and use Freefonn system to simulate operation and a new path to communion with patients for a good operation.
RESUMO
<p><b>OBJECTIVE</b>To compare the effects of the external ultrasonic, the internal ultrasonic and simple negative pressure liposuction operations under tumescent anesthesia.</p><p><b>METHODS</b>The fat volume, operative time, complications and other indexes of liposuction in 276 cases were collected and compared.</p><p><b>RESULTS</b>External ultrasonic liposuction rapidly emulsified the fat with the least complication. The effects of the internal ultrasonic liposuction was next to the external ultrasonic method while the simple negative pressure liposuction had the poorest effects.</p><p><b>CONCLUSION</b>The external ultrasonic liposuction operation is a safe and effective method for local overweight reduction.</p>
Assuntos
Adolescente , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Lipectomia , MétodosRESUMO
Objective To evaluate the clinical anatomy for repair the deformed of later facial paralysis in power by grouped human specimen of the blood vessel and nerve bunch of temporal muscle Methods Materials consisted of 20 fresh human temporalis muscle specimens Divided to four groups in random Vascular infusion was by either solution of lead oxide,methylmethacrylate or Zhonghua ink,and stained the microdissection of nerve All the images were made photograph,and overlaped by computer To form the bunches of vascular and nerve Results Temporal muscle have three bunches to utilize independently,and the blood vessel and nerve formed a dense interlacing network Conclusion To power correct deformed in eye,nose and mouth of later facial paralysis,we can accomplish once a time with the corresponding temporal muscle bunches of vascular and nerve