A Smart Window with Passive Radiative Cooling and Switchable Near-Infrared Light Transmittance via Molecular Engineering.

Smart windows with synergetic light modulation have heightened demands for applications in smart cars and novel buildings. However, improving the on-demand energy-saving efficiency is quite challenging due to the difficulty of modulating sunlight with a broad bandwidth in an energy-saving way. Herein, a smart window with switchable near-infrared light transmittance and passive radiative cooling is prepared via a monomer design strategy and photoinduced polymerization. The effects of hydrogen bonds and fluorine groups in acrylate monomers on the electro-optical properties as well as microstructures of polymer-dispersed liquid crystal films have been systematically studied. Some films show a high contrast ratio of 90.4 or a low threshold voltage (Vth) of 2.0 V, which can be roll-to-roll processed in a large area. Besides, the film has a superior indoor temperature regulation ability due to its passive radiative cooling and controllable near-infrared light transmittance properties. Its radiative cooling efficiency is calculated to be 142.69 W/m2 and NIR transmittance could be switched to below 10%. The introduction of a carboxylic monomer and fluorinated monomer into the system endows the film with a highly efficient temperature management capability. The film has great potential for applications in fields such as flexible smart windows, camouflage materials, and so on.

Programmable Dynamic Information Storage Composite Film with Highly Sensitive Thermochromism and Gradually Adjustable Fluorescence.

The development of an integrated material system capable of effectively organizing and combining multisource information, such as dynamic pigmentary, structural, and fluorescent colors, is significant and challenging. Achieving such programmable dynamic information storage can considerably enhance the diversity and security of information deliveries. Here, a polymer-stabilized cholesteric liquid crystal system with highly temperature-sensitive structural color and light-sensitive pigmentary and fluorescence colors is presented. The prepared cholesteric liquid crystals (clcs) can reversibly change their structural color from red to blue within variational 3 °C near room temperature, and exhibit a gradually adjustable fluorescence which can transform from blue to pink and finally to bright red. All this dynamic information is programmable and tailored, hundreds of thousands of (>540 000) pattern combinations can easily be achieved by optical writing with a "bagua" pattern photomask. Therefore, if the corresponding code combinations to the pattern are assigned particular meanings, encrypted transmission of information with very high security can be achieved by utilizing applicable information encoding tables and decryption rules.

Research on lightweight laminate for car body with excellent cushioning and energy absorption characteristics.

With the development of the economy, car ownership is increasing day by day. In the context of energy shortage and environmental pollution, it is very important to study lightweight and ensure car safety. In this paper, a lightweight fiber metal laminate (FML) with excellent cushioning and energy absorption characteristics for car body is proposed by studying the deformation and energy absorption mechanism of ordinary groove plate under flat pressure. The FML is made up of an M-shaped aluminum alloy sandwich plate and two carbon fiber reinforced composite outer panels. By means of experiment and finite element simulation, it is proved that this structure had good cushioning energy absorption effect. Under the same conditions, the peak force of the M-shaped corrugated core FML with 2.5 mm groove depth is 46.3% of that of the traditional trapezoidal corrugated-core FMLs. Besides, the energy absorption capacity of the M-shaped corrugated core FML with 2 mm groove depth is 1.62 times of that of the traditional trapezoidal corrugated-core FMLs, before the top plate of sandwich unit touches the bottom plate. And cushioning energy absorption mechanism of M-shaped corrugated core FML is further explained by simulation.

Recent Advances in The Polymer Dispersed Liquid Crystal Composite and Its Applications.

Polymer dispersed liquid crystals (PDLCs) have kindled a spark of interest because of their unique characteristic of electrically controlled switching. However, some issues including high operating voltage, low contrast ratio and poor mechanical properties are hindering their practical applications. To overcome these drawbacks, some measures were taken such as molecular structure optimization of the monomers and liquid crystals, modification of PDLC and doping of nanoparticles and dyes. This review aims at detailing the recent advances in the process, preparations and applications of PDLCs over the past six years.

Unconventional High-Performance Laser Protection System Based on Dichroic Dye-Doped Cholesteric Liquid Crystals.

High-performance and cost-effective laser protection system is of crucial importance for the rapid advance of lasers in military and civilian fields leading to severe damages of human eyes and sensitive optical devices. However, it is crucially hindered by the angle-dependent protective effect and the complex preparation process. Here we demonstrate that angle-independence, good processibility, wavelength tunability, high optical density and good visibility can be effectuated simultaneously, by embedding dichroic anthraquinone dyes in a cholesteric liquid crystal matrix. More significantly, unconventional two-dimensional parabolic protection behavior is reported for the first time that in stark contrast to the existing protection systems, the overall parabolic protection behavior enables protective effect to increase with incident angles, hence providing omnibearing high-performance protection. The protective effect is controllable by dye concentration, LC cell thickness and CLC reflection efficiency, and the system can be made flexible enabling applications in flexible and even wearable protection devices. This research creates a promising avenue for the high-performance and cost-effective laser protection, and may foster the development of optical applications such as solar concentrators, car explosion-proof membrane, smart windows and polarizers.

Effect of a Polymercaptan Material on the Electro-Optical Properties of Polymer-Dispersed Liquid Crystal Films.

Polymer-dispersed liquid crystal (PDLC) films were prepared by the ultraviolet-light-induced polymerization of photopolymerizable monomers in nematic liquid crystal/chiral dopant/thiol-acrylate reaction monomer composites. The effects of the chiral dopant and crosslinking agents on the electro-optical properties of the PDLC films were systematically investigate. While added the chiral dopant S811 into the PDLC films, the initial off-state transmittance of the films was decreased. It was found that the weight ratio among acrylate monomers, thiol monomer PETMP and the polymercaptan Capcure 3-800 showed great influence on the properties of the fabricated PDLC films because of the existence of competition between thiol-acrylate reaction and acrylate monomer polymerization reaction. While adding polymercaptans curing agent Capcure 3-800 with appropriate concentration into the PDLC system, lower driven voltage and higher contrast ratio were achieved. This made the polymer network and electro-optical properties of the PDLC films easily tunable by the introduction of the thiol monomers.

Light-controllable reflection wavelength of blue phase liquid crystals doped with azobenzene-dimers.

A new series of azobenzene-dimers were synthesized and doped into the blue phase liquid crystals to broaden the temperature range of BPs. It is found that not only can the reflection wavelength of BPI be reversibly controlled but BPI can also be transformed into the cholesteric phase owing to isomerization of azobenzene induced by light.