RESUMO
The effective capture and recovery of radioiodine species associated with nuclear fuel reprocessing is of significant importance in nuclear power plants. Porous materials have been proven to be one of the most effective adsorbents for the capture of radioiodine. In this work, we design and synthesize a series of conjugated microporous polymers (CMPs), namely, TPDA-TFPB CMP, TPDA-TATBA CMP, and TPDA-TECHO CMP, which are constructed based on a planar rectangular 4-connected organic monomer and three triangular 3-connected organic monomers, respectively. The resultant CMPs are characterized using various characterization techniques and used as effective adsorbents for iodine capture. Our experiments indicated that the CMPs exhibit excellent iodine adsorption capacities as high as 6.48, 6.25, and 6.37 g g-1 at 348 K and ambient pressure. The adsorption mechanism was further investigated and the strong chemical adsorption between the iodine and the imine/tertiary ammonia of the CMPs, 3D network structure with accessible hierarchical pores, uniform micromorphology, wide π-conjugated structure, and high-density Lewis-base sites synergistically contribute to their excellent iodine adsorption performance. Moreover, the CMPs demonstrated good recyclability. This work provides guidance for the construction of novel iodine adsorbent materials with high efficiency in the nuclear power field.
RESUMO
Background: Prostate cancer is the most common malignancy in men, and its incidence is increasing year by year. Some studies have shown that risk factors for prostate cancer are related to insulin resistance. The triglyceride-glucose (TyG) index is a marker of insulin resistance. We investigated the validity of TyG index for predicting prostate cancer and the dose-response relationship in prostate cancer in relation to it. Objective: To investigate the risk factors of TyG index and prostate cancer prevalence. Methods: This study was screened from the First Affiliated Hospital of Xinjiang Medical University and included 767 people, including 136 prostate cancer patients in the case group and 631 healthy people in the control group. The relationship between TyG index and the risk of prostate cancer was analyzed by one-way logistic regression, adjusted for relevant factors, and multi-factor logistic regression analysis was performed to further investigate the risk factors affecting the prevalence of prostate cancer. ROC curves and Restricted Cubic Spline were established to determine the predictive value and dose-response relationship of TyG index in prostate cancer. Results: Blood potassium (OR = 0.056, 95% CI [0.021-0.148]), total cholesterol (OR = 1.07, 95% CI [0.792-1.444]) and education level (OR = 0.842, 95% CI [0.418-1.697]) were protective factors for prostate cancer, alkaline phosphatase, age, LDL, increased the risk of prostate cancer (OR = 1.016, 95% CI [1.006-1.026]) (OR = 139.253, 95% CI [18.523-1,046.893] (OR = 0.318, 95% CI [0.169-0.596]); TyG index also was a risk factor for prostate cancer, the risk increased with TyG levels,and persons in the TyGQ3 group (8.373-8.854 mg/dL) was 6.918 times (95% CI [2.275-21.043]) higher than in the Q1 group,in the TyGQ4 group (≥8.854) was 28.867 times of those in the Q1 group (95% CI [9.499-87.727]). Conclusion: TyG index may be a more accurate and efficient predictor of prostate cancer.
Assuntos
Resistência à Insulina , Neoplasias da Próstata , Masculino , Humanos , Estudos Retrospectivos , Neoplasias da Próstata/epidemiologia , Fosfatase Alcalina , GlucoseRESUMO
Radioactive iodine from nuclear waste poses a huge threat to public safety and raises concerns about environmental pollution. There is thus a growing demand for developing novel adsorbents for highly effective iodine capture. In this work, we design and synthesize three novel conjugated microporous polymers, namely, TPE-PyTTA-CMP, TPE-TAPP-CMP, and TPE-TPDA-CMP, which are constructed by an imidization reaction based on octet and tetratopic linkers. The iodine vapor adsorption experiments show that the three CMPs have an excellent iodine adsorption capacity as high as 3.10, 3.67, and 4.68 g·g-1 under 348 K and ambient pressure conditions, respectively. The adsorbed iodine in the CMPs can be released into methanol in a dramatically rapid manner, and their excellent iodine adsorption performance can still be maintained after multiple cycles. In addition, the CMPs demonstrate good adsorption performance in an n-hexane solution of iodine, and the kinetic experimental data follow the pseudo-second-order model. The hierarchical porosity, extended π-conjugated skeleton, and rich electron-donor nitrogen sites of the CMPs could contribute to their excellent iodine adsorption performance. The knowledge information obtained in this work could open up new possibilities for designing novel CMPs targeting a wide range of environment-related applications.
RESUMO
Recycling Kr and Xe from used nuclear fuel (UNF) is conducive to regenerating economy and protecting the environment, and it is urgent to screen or design high-performance cutting-edge metal-organic framework (MOF) materials for Kr/Xe adsorption separation. After grand canonical Monte Carlo (GCMC) simulations of Kr/Xe adsorption separation on 11,000 frameworks in CoRE MOFs (2019), the important structure-adsorption property relationship (SAPR) was induced; that is, the porosity (φ) at 0.30-0.40, LCD/PLD at 1.00-1.49, density (ρ) range between 1.20 and 2.30 g/cm3, and PLD at 2.40-3.38 Å can be utilized to screen for high-performance G-MOFs and hMOFs. In addition, the key "genes" (metal nodes and linkers) of MOFs determining the Kr/Xe adsorption separation were data-mined by a machine learning technique, which were assembled into novel MOFs. After comprehensive consideration of thermal stability and the adsorbent performance score (APS), eight promising MOFs on Kr/Xe separation with the APS more than 1290.89 were screened out and assembled, which are better than most of the reported frameworks. Note that the adsorption isotherms of these MOFs on Kr and Xe belong to type I curve with the thermodynamic equilibrium mechanism on Kr/Xe based on the confinement effect. Furthermore, according to the electronic structure calculations of the independent gradient model based on Hirshfeld partition (IGMH) and energy decomposition analysis, it is found that the interactions between guests and frameworks are vdW forces with dominant induction energy (Eind). In addition, the electrostatic potential gradients of frameworks are generally linearly negative correlated with Kr uptakes. Therefore, both the geometrical and electronic structures dominate the adsorption separation performance on Kr/Xe. Interestingly, these eight MOFs are also suitable for the separation of CH4/H2 with considerable selectivities and CH4 uptakes of up to 2566.67 and 3.04 mmol/g, respectively. Herein, the accurately constructed SAPR and material genomics strategy should be helpful for the experimental discovery of novel MOFs on Kr/Xe separation experimentally.
RESUMO
The selective separation of thorium from rare earth elements and uranium is a critical part of the development and application of thorium nuclear energy in the future. To better understand the role of different N sites on the selective capture of Th(IV), we design an ionic COF named Py-TFImI-25 COF and its deionization analog named Py-TFIm-25 COF, both of which exhibit record-high separation factors ranging from 102 to 105. Py-TFIm-25 COF exhibits a significantly higher Th(IV) uptake capacity and adsorption rate than Py-TFImI-25 COF, which also outperforms the majority of previously reported adsorbents. The selective capture of Py-TFImI-25 COF and Py-TFIm-25 COF on thorium is via Th-N coordination interaction. The prioritization of Th(IV) binding at different N sites and the mechanism of selective coordination are then investigated. This work provides an in-depth insight into the relationship between structure and performance, which can provide positive feedback on the design of novel adsorbents for this field.
RESUMO
The significant differences in the catalytic properties caused by different 'isotopic catalysts' were discovered for the first time. The commonly purchased Fe2O3 is a 'mixture' of different Fe isotopic oxides which means the catalytic effect of Fe2O3 is theoretically a synthetical result of all isotopic compounds. In this work, the differences in catalytic properties of α-Fe2O3 with natural abundance ratio and separated isotopic α-Fe2O3 (α-54Fe2O3, α-56Fe2O3, and α-58Fe2O3) catalyzing thermal decomposition of ammonium perchlorate (AP) were investigated, and are mainly attributed to the difference in the charge distribution of the nuclei of different iron isotopes. The result suggests that isotope effects in different isotopes when utilized as catalysts are caused by nuclear morphology and the nuclear charge distribution. This study will serve as a base as well as an initiation for future studies of the isotopic catalyst.
RESUMO
In order to solve the problem that UO2 in direct ethanol fuel cell anode catalysts is easily lost in acidic solution, resulting in the degradation of catalytic performance, this paper prepared a C/UO2/PVP/Pt catalyst in three steps by adding polyvinylpyrrolidone (PVP). The test results by XRD, XPS, TEM and ICP-MS showed that PVP had a good encapsulation effect on UO2, and the actual loading rates of Pt and UO2 were similar to the theoretical values. When 10% PVP was added, the dispersion of Pt nanoparticles was significantly improved, which reduced the particle size of Pt nanoparticles and provided more ethanol electrocatalytic oxidation reaction sites. The test results by electrochemical workstation showed that the catalytic activity as well as the stability of the catalysts were optimized due to the addition of 10% PVP.
RESUMO
Herein, based on a well-stabilized Ti-MOF (IEF-11), an oxygen-rich ion trap with synergy interaction of active atoms was proposed for the removal of Th(IV) and U(VI) from aqueous solutions. Due to the high coordination number of Ti and compact framework structure, IEF-11 has excellent resistance toward ß-ray irradiation, even under 1000 kGy irradiation dosage. Meanwhile, owing to the special chelating effect of the oxygen-rich ion traps, the maximum adsorption amounts of IEF-11 for Th(IV) (pH = 3.0) and U(VI) (pH = 5.0) ions can reach 305.9 and 240.7 mg g-1, and the separation coefficients exceed 200 for Th(IV)/Nd(III), Th(IV)/Sm(III), and Th(IV)/Eu(III) and 100 for U(VI)/Eu(III), U(VI)/La(III), and U(VI)/Sr(II). Moreover, IEF-11 shows fast adsorption kinetics with an equilibrium time of â¼100 min. The adsorption amount almost remains even after four adsorption-desorption cycles. Finally, experimental and theoretical calculations indicate that Th(IV) and U(VI) ions are anchored in the ion trap in the form of chemical bonds. Meanwhile, the circular pore trap (class I trap) than the long pore trap (class II trap) is considered to be the better adsorption site. We expect that our work will provide a new insight for constructing effective adsorbents for radioactive nuclides.
RESUMO
Background: Current research suggests that prostate cancer (PCa), one of the most common cancers in men, may be linked to insulin resistance (IR).Triglyceride-glucose index (TyG index) was made for a marker of insulin resistance. We investigated the relationship between the TyG index and the risk of PCa. Objective: To assess the correlation and dose-response relationship between TyG index and prostate cancer. Method: Retrospectively, 316 patients who required prostate biopsy puncture in the First Affiliated Hospital of Xinjiang Medical University from March 2017 to July 2021 were collected, and the relationship between factors such as the TyG index and prostate cancer was analyzed by Logistic regression model combined with a restricted cubic spline. Results: (1) The differences in age, initial PSA and TyG index between the two groups were statistically significant; (2) Logistic regression results showed that the risk of prostate cancer in the highest quartile of the TyG index (Q4) was 3.387 times higher than that in the lowest quartile (Q1) (OR=3.387,95% CI [1.511,7.593], P=0.003); (3) The interaction results showed a significant interaction between the TyG index Q4 group and age with the risk of developing prostate cancer (P for interaction<0.001). (4) The results of the restricted cubic spline showed a linear dose-response relationship between the TyG index and the risk of prostate cancer; (5) The Receiver operating characteristic (ROC) curve results showed that the area under the curve (AUC) of the TyG index combined with initial PSA and age was 0.840, with a sensitivity and specificity of 62.5% and 93.3%, respectively. Conclusion: TyG index and age are risk factors for prostate cancer, and the interaction between the TyG index and different risk factors may increase the risk of prostate cancer. TyG index has some predictive value for the risk of prostate cancer, and the risk of prostate cancer can be reduced by controlling the levels of blood lipids and blood glucose.
Assuntos
Resistência à Insulina , Neoplasias da Próstata , Masculino , Humanos , Estudos Retrospectivos , Glucose , Triglicerídeos , Antígeno Prostático Específico , Biópsia por Agulha Fina , Neoplasias da Próstata/diagnósticoRESUMO
Highly efficient removal of Hg(ii) has been previously achieved through the adsorption by functionalized covalent organic frameworks (COFs). Among these COFs, thioether groups need to be deliberately introduced into the pores of COFs through either a bottom-up synthesis or post-synthesis strategy. Herein, we report a simple mercury removal strategy that used a stable alkynyl (-C[triple bond, length as m-dash]C-) based covalent organic framework (TP-EDDA COF) as an adsorbent for Hg(ii) removal. Sulfur vapor was first adsorbed by the TP-EDDA COF due to the van der Waals interaction between adsorbed sulfur and alkynyl groups. The Hg(ii) removal capability was then evaluated for the sulfur loaded TP-EDDA COF. Our results exhibited a good Hg(ii) removal performance for the sulfur loaded TP-EDDA COF. It was deduced that sâ¯π interaction between sulfur atom and the alkynyl groups of the COF skeleton caused an increase in the electron density of sulfur and the electronegative sulfur atoms acted as a soft acid to accept soft-basic Hg(ii). This strategy provides a convenient platform for COFs to cope with environmental issues.
RESUMO
Transforming CO2 into value-added chemicals has been an important subject in recent years. The development of a novel heterogeneous catalyst for highly effective CO2 conversion still remains a great challenge. As an emerging class of porous organic polymers, covalent organic frameworks (COFs) have exhibited superior potential as catalysts for various chemical reactions, due to their unique structure and properties. In this study, a layered two-dimensional (2D) COF, IM4F-Py-COF, was prepared through a three-component condensation reaction. Benzimidazole moiety, as an ionic liquid precursor, was integrated onto the skeleton of the COF using a benzimidazole-containing building unit. Ionization of the benzimidazole framework was then achieved through quaternization with 1-bromobutane to produce an ionic liquid-immobilized COF, i.e., BMIM4F-Py-COF. The resulting ionic COF shows excellent catalytic activity in promoting the chemical fixation of CO2 via reaction with epoxides under solvent-free and co-catalyst-free conditions. High porosity, the one-dimensional (1D) open-channel structure of the COF and the high catalytic activity of ionic liquid may contribute to the excellent catalytic performance. Moreover, the COF catalyst could be reused at least five times without significant loss of its catalytic activity.
RESUMO
Radioactive UO2 powder was prepared by hydrothermal method and a set of Pt-xUO2/C catalysts were synthesized by impregnation method for solving the problem of low activity and easy poisoning of anode Pt/C catalysts for a direct ethanol fuel cell. XRD, TEM, EDS, XPS and ICP-MS characterization showed the successful loading of Pt and UO2 onto the carbon carrier. Electrochemical workstation and single cell test results confirm that the catalytic performance of Pt-10% UO2/C is significantly better than Pt/C-eg. It is speculated that the synergistic effect of Pt and U enhances the catalytic activity and UO2 improves the resistance to CO poisoning by releasing O2 stored in the lattice space, while the α-particles released by 235U can also generate radiolysis product OH and promote the oxidative desorption of CO from the Pt surface.
RESUMO
As one of the main nuclear wastes generated in the process of nuclear fission, radioactive iodine has attracted worldwide attention due to its harm to public safety and environmental pollution. Therefore, it is of crucial importance to develop materials that can rapidly and efficiently capture radioactive iodine. Herein, we report the construction of three electron-rich porous organic polymers (POPs), denoted as POP-E, POP-T and POP-P via Schiff base polycondensations reactions between Td-symmetric adamantane knot and four-branched "linkage" molecules. We demonstrated that all the three POPs showed high iodine adsorption capability, among which the adsorption capacity of POP-T for iodine vapor reached up to 3.94 g·g-1 and the removal rate of iodine in n-hexane solution was up to 99%. The efficient iodine capture mechanism of the POP-T was investigated through systematic comparison of Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) before and after iodine adsorption. The unique π-π conjugated system between imine bonds linked aromatic rings with iodine result in charge-transfer complexes, which explains the exceptional iodine capture capacity. Additionally, the introduction of heteroatoms into the framework would also enhance the iodine adsorption capability of POPs. Good retention behavior and recycling capacity were also observed for the POPs.
Assuntos
Iodo , Neoplasias da Glândula Tireoide , Elétrons , Humanos , Iodetos , Iodo/química , Radioisótopos do Iodo , Polímeros/química , Porosidade , Bases de Schiff , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
A novel self-reactivated catalyst Pt-ThO2/C was prepared for the first time by selecting radioactive material ThO2 as the catalytic additive to address the low activity and toxicity of the anode Pt/C catalyst in a direct ethanol fuel cell. The catalytic activity and resistance to CO poisoning of Pt-6.67 wt%ThO2/C were found to be superior to those of Pt/C-NaBH4 in electrochemical workstation and single-cell tests. It is speculated that the exist of ThO2 not only improves the catalytic activity via the synergistic effect of Pt and Th, but also produces a large amount of radiolysis products, OH radicals, due to 232Th which oxidatively desorbs CO from Pt-COads and solves the CO poisoning problem.
RESUMO
The solvent extraction, complexing ability, and basicity of tetradentate N-donor 2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-1,10-phenanthroline (CyMe4-BT- Phen) and its derivatives functionalized by Br, hydroxyphenyl, nitryl were discussed and compared. It was demonstrated that four BTPhen ligands are able to selectively extract Am(lll) over Eu(lll). It was notable that the distribution ratio of 5-nitryl-CyMe4-BTPhen for Eu(lll) was suppressed under 0.02, which was much lower compared to DEu(lll) = 1 by CyMe4-BTPhen. The analysis of the effect of the substituent on the affinity to lanthanides was conducted by UV/vis and fluorescence spectroscopic titration. The stability constants of various ligands with Eu(lll) were obtained by fitting titration curve. Additionally, the basicity of various ligands was determined to be 3.1 ± 0.1, 2.3 ± 0.2, 0.9 ± 0.2, 0.5 ± 0.1 by NMR in the media of CD3OD with the addition of DClO4. The basicity of ligands follows the order of L1 > L2 > L3 > L4, indicating the tendency of protonation decreases with the electron-withdrawing ability increase.
RESUMO
Zirconium-based metal-organic frameworks (Zr-MOFs) have great structural stability and offer great promise in the application of gas capture. However, the powder nature of MOF microcrystallines hinders their further industrial-scale applications in fluid-phase separations. Here, Zr-based DUT-68 was structured into nontoxic and eco-friendly alginate beads, and the gas capture properties were evaluated by CO2 and volatile iodine. DUT-68 beads were synthesized via a facile and versatile cross-linked polymerization of sodium alginate with calcium ions. The composite beads keep the structural integrity and most of the pore accessibility of DUT-68. The resulting DUT-68@Alginate (2:1) porous bead processes a surface area of 541 m2/g and compressive strength as high as 1.2 MPa, and the DUT-68 crystals were well-dispersed in the alginate networks without agglomeration. The DUT-68@Alginate bead with a 60% weight ratio of MOFs exhibits a high carbon dioxide capacity (1.25 mmol/g at 273 K), as well as an excellent high adsorption capacity for iodine, reaching up to 0.65 g/g at 353 K. This work provides a method to construct thiophene-contained composite beads with millimeter sizes for the capture of gases in potential industrial applications.
RESUMO
COF-DL229 is one of the promising sorbents for the capture of volatile radioiodine due to its large adsorption capacity. However, the interaction mechanism between them remains unclear. In the present work, the adsorption of volatile iodine onto COF-DL229 was systematically investigated using periodic density functional theory and crystal orbital Hamilton population calculations. The "soft" characters of COF-DL229 have been theoretically demonstrated. Furthermore, the adsorption energies are extremely large (-8.38 to -9.26 eV), which mainly originate from the framework deformation energies, accounting for 90% at least. The I2 interacts with the skeleton mainly through the N atoms of the imine linkers or the C atoms of the phenyl rings. And, the I-N bond is the strongest bond among all the potential secondary bonds formed between the skeleton and I2. The electrons could be transferred from the skeletons to the iodine atoms and from the near iodine atom to the far one. It is also found that the energy gap becomes narrow after iodine adsorption and the skeletons mainly interact with the bonding orbital σp of I2. The present work could provide reasonable theoretical explanations to the corresponding experimental investigations and contribute to the design and screening of better sorbents for the capture of volatile radioiodine.
RESUMO
In this work, for the first time, we fabricated a novel covalent organic framework (COF)-based 2D-2D heterojunction composite MoS2/COF by a facile hydrothermal method. The results of photocatalytic degradation of TC and RhB under simulated solar light irradiation showed that the as-prepared composite exhibited outstanding catalytic efficiency compared with pristine COFs and MoS2. The significantly enhanced catalytic efficiency can be ascribed to the formation of 2D-2D heterojunction with a well-matched band position between COF and MoS2, which can effectively restrain the recombination of charge carriers and increase the light absorption as well as the specific surface area. Moreover, the fabricated 2D-2D layered structure can effectively increase the contact area with an intimate interface contact, which greatly facilitates the charge mobility and transfer in the interfaces. This study reveals that artful integration of organic (COFs) and inorganic materials into a single hybrid with a 2D-2D interface is an effective strategy to fabricate highly efficient photocatalysts.
RESUMO
In the present study, a hierarchical Co9S8@ZnAgInS heterostructural cage was developed for the first time which can photocatalytically produce hydrogen and degrade organic pollutants with high efficiency. First, the Co9S8 dodecahedron was synthesized using a metal-organic framework (MOFs) material, ZIF-67, as a precursor, then two kinds of metal sulfide semiconductors were elaborately integrated into a hierarchical hollow heterostructural cage with coupled heterogeneous shells and 2D nanosheet subunits. The artfully designed hollow heterostructural composite exhibited remarkable photocatalytic activity without using any cocatalysts, with a 9395.3 µmol g-1 h-1 H2 evolution rate and high degradation efficiency for RhB. The significantly enhanced photocatalytic activity can be attributed to the unique architecture and intimate-contact interface between Co9S8 and ZnAgInS, which promote the transfer and separation of the photogenerated charges, increase light absorption, and offer large surface area and active sites. This work presents a new strategy to design highly active semiconductor photocatalysts by using MOF materials as precursors and coupling of metal sulfide semiconductors to form hollow architecture dodecahedron cages with an intimate interface.
RESUMO
With the rapid development of fuel cell technology, the low reduction rate of oxygen on Pt-based cathodes is generally considered the main obstacle. Pt/transition metal alloys (Pt-Ms) or Pt/transition metal oxides (Pt-MO x ) can be formed by doping transition metal atoms into the lattice of the Pt layer or depositing onto the surface of the Pt layer to intensify the catalytic activity of the electrodes. In this work, a stepwise solution chemical reduction method for high dispersion of cobalt oxyhydroxide (-OCoOH) deposited onto the facet of Pt as nano-islands and the mechanism of promoting the oxygen reduction reaction (ORR) at the cathode have been investigated by density functional theory (DFT) calculation. As a result, the electrocatalytic activity of Pt with nano-island -OCoOH structure was 3.6 times that of the Pt/C catalyst, which indicated that promoting the desorption of the first O atom and weakening the adsorption capacity of the interfacial junction Pt for the second O atom from adsorbed oxygen attributed to the migration of d-band center in Pt and the existence of the Co hydroxyl group.