In vivo antibacterial activity of medicinal plant Sophora flavescens against Streptococcus agalactiae infection.

Streptococcosis disease caused by Streptococcus agalactiae (Group B Streptococcus, GBS) results in a huge economic loss of tilapia culture. It is urgent to find new antimicrobial agents against streptococcosis. In this study, 20 medicinal plants were evaluated in vitro and in vivo to obtain medicinal plants and potential bioactive compounds against GBS infection. The results showed that the ethanol extracts of 20 medicinal plants had low or no antibacterial properties in vitro, with a minimal inhibitory concentration ≥256 mg/L. Interestingly, in vivo tests showed that 7 medicinal plants could significantly inhibit GBS infection in tilapia, and Sophora flavescens (SF) had the strongest anti-GBS activity in tilapia, reaching 92.68%. SF could significantly reduce the bacterial loads of GBS in different tissues (liver, spleen and brain) of tilapia after treated with different tested concentrations (12.5, 25.0, 50.0 and 100.0 mg/kg) for 24 h. Moreover, 50 mg/kg SF could significantly improve the survival rate of GBS-infected tilapia by inhibiting GBS replication. Furthermore, the expression of antioxidant gene cat, immune-related gene c-type lysozyme and anti-inflammatory cytokine il-10 in liver tissue of GBS-infected tilapia significantly increased after treated with SF for 24 h. Meanwhile, SF significantly reduced the expression of immune-related gene myd88 and pro-inflammatory cytokines il-8 and il-1ß in liver tissue of GBS-infected tilapia. The negative and positive models of UPLC-QE-MS, respectively, identified 27 and 57 components of SF. The major components of SF extract in the negative model were α, α-trehalose, DL-malic acid, D- (-)-fructose and xanthohumol, while in the positive model were oxymatrine, formononetin, (-)-maackiain and xanthohumol. Interestingly, oxymatrine and xanthohumol could significantly inhibit GBS infection in tilapia. Taken together, these results suggest that SF can inhibit GBS infection in tilapia, and it has potential for the development of anti-GBS agents.

Parental detection of neonatal jaundice using a low-cost colour card: a multicentre prospective study.

BACKGROUND: Since most infants are usually discharged before age 48-72 hours, peak bilirubin levels will almost always occur after discharge. Parents may be the first to observe the onset of jaundice after discharge, but visual assessment is unreliable. The jaundice colour card (JCard) is a low-cost icterometer designed for the assessment of neonatal jaundice. The objective of this study was to evaluate parental use of JCard to detect jaundice in neonates. METHODS: We conducted a multicentre, prospective, observational cohort study in nine sites across China. A total of 1161 newborns ≥35 weeks of gestation were enrolled in the study. Measurements of total serum bilirubin (TSB) levels were based on clinical indications. The JCard measurements by parents and paediatricians were compared with the TSB. RESULTS: JCard values of parents and paediatricians were correlated with TSB (r=0.754 and 0.788, respectively). The parents' and paediatricians' JCard values 9 had sensitivities of 95.2% vs 97.6% and specificities of 84.5% vs 71.7% for identifying neonates with TSB ≥153.9 µmol/L. The parents' and paediatricians' JCard values 15 had sensitivities of 79.9% vs 89.0% and specificities of 66.7% vs 64.9% for identifying neonates with TSB ≥256.5 µmol/L. Areas under the receiver operating characteristic curves of parents for identifying TSB ≥119.7, ≥153.9, ≥205.2, and ≥256.5 µmol/L were 0.967, 0.960, 0.915, and 0.813, respectively, and those of paediatricians were 0.966, 0.961, 0.926 and 0.840, respectively. The intraclass correlation coefficient was 0.933 between parents and paediatricians. CONCLUSION: The JCard can be used to classify different levels of bilirubin, but it is less accurate with high bilirubin levels. The JCard diagnostic performance of parents was slightly lower than that of paediatricians.

A Bis(imidazole)-based cysteine labeling tool for metalloprotein assembly.

Precise metal-protein coordination by design remains a considerable challenge. Polydentate, high-metal-affinity protein modifications, both chemical and recombinant, can enable metal localization. However, these constructs are often bulky, conformationally and stereochemically ill-defined, or coordinately saturated. Here, we expand the biomolecular metal-coordination toolbox with the irreversible attachment to cysteine of bis(1-methylimidazol-2-yl)ethene ("BMIE"), which generates a compact imidazole-based metal-coordinating ligand. Conjugate additions of small-molecule thiols (thiocresol and N-Boc-Cys) with BMIE confirm general thiol reactivity. The BMIE adducts are shown to complex the divalent metal ions Cu++ and Zn++ in bidentate (N2) and tridentate (N2S*) coordination geometries. Cysteine-targeted BMIE modification (>90% yield at pH 8.0) of a model protein, the S203C variant of carboxypeptidase G2 (CPG2), measured with ESI-MS, confirms its utility as a site-selective bioconjugation method. ICP-MS analysis confirms mono-metallation of the BMIE-modified CPG2 protein with Zn++, Cu++, and Co++. EPR characterization of the BMIE-modified CPG2 protein reveals the structural details of the site selective 1:1 BMIE-Cu++ coordination and symmetric tetragonal geometry under physiological conditions and in the presence of various competing and exchangeable ligands (H2O/HO-, tris, and phenanthroline). An X-ray protein crystal structure of BMIE-modified CPG2-S203C demonstrates that the BMIE modification is minimally disruptive to the overall protein structure, including the carboxypeptidase active sites, although Zn++ metalation could not be conclusively discerned at the resolution obtained. The carboxypeptidase catalytic activity of BMIE-modified CPG2-S203C was also assayed and found to be minimally affected. These features, combined with ease of attachment, define the new BMIE-based ligation as a versatile metalloprotein design tool, and enable future catalytic and structural applications.

Association of myocardial fibrosis detected by late gadolinium-enhanced MRI with clinical outcomes in patients with diabetes: a systematic review and meta-analysis.

OBJECTIVE: This meta-analysis assessed the associations of myocardial fibrosis detected by late gadolinium-enhanced (LGE)-MRI with the risk of major adverse cardiac and cerebrovascular events (MACCEs) and major adverse cardiac events (MACEs) in patients with diabetes. DESIGN: Systematic review and meta-analysis reported in accordance with the guidelines of the Meta-analysis of Observational Studies in Epidemiology statement. DATA SOURCES: We searched the Medline, Embase and Cochrane by Ovid databases for studies published up to 27 August 2021. ELIGIBILITY CRITERIA: Prospective or respective cohort studies were included if they reported the HR and 95% CIs for MACCEs/MACEs in patients with either type 1 or 2 diabetes and LGE-MRI-detected myocardial fibrosis compared with patients without LGE-MRI-detected myocardial fibrosis and if the articles were published in the English language. DATA EXTRACTION AND SYNTHESIS: Two review authors independently extracted data and assessed the quality of the included studies. Pooled HRs and 95% CIs were analysed using a random effects model. Heterogeneity was assessed using forest plots and I2 statistics. RESULTS: Eight studies with 1121 patients with type 1 or type 2 diabetes were included in this meta-analysis, and the follow-up ranged from 17 to 70 months. The presence of myocardial fibrosis detected by LGE-MRI was associated with an increased risk for MACCEs (HR: 2.58; 95% CI 1.42 to 4.71; p=0.002) and MACEs (HR: 5.28; 95% CI 3.20 to 8.70; p<0.001) in patients with diabetes. Subgroup analysis revealed that ischaemic fibrosis detected by LGE was associated with MACCEs (HR 3.80, 95% CI 2.38 to 6.07; p<0.001) in patients with diabetes. CONCLUSIONS: This study demonstrated that ischaemic myocardial fibrosis detected by LGE-MRI was associated with an increased risk of MACCEs/MACEs in patients with diabetes and may be an imaging biomarker for risk stratification. Whether LGE-MRI provides incremental prognostic information with respect to MACCEs/MACEs over risk stratification by conventional cardiovascular risk factors requires further study.

Evolution of the SARS-CoV-2 proteome in three dimensions (3D) during the first 6 months of the COVID-19 pandemic.

Understanding the molecular evolution of the SARS-CoV-2 virus as it continues to spread in communities around the globe is important for mitigation and future pandemic preparedness. Three-dimensional structures of SARS-CoV-2 proteins and those of other coronavirusess archived in the Protein Data Bank were used to analyze viral proteome evolution during the first 6 months of the COVID-19 pandemic. Analyses of spatial locations, chemical properties, and structural and energetic impacts of the observed amino acid changes in >48 000 viral isolates revealed how each one of 29 viral proteins have undergone amino acid changes. Catalytic residues in active sites and binding residues in protein-protein interfaces showed modest, but significant, numbers of substitutions, highlighting the mutational robustness of the viral proteome. Energetics calculations showed that the impact of substitutions on the thermodynamic stability of the proteome follows a universal bi-Gaussian distribution. Detailed results are presented for potential drug discovery targets and the four structural proteins that comprise the virion, highlighting substitutions with the potential to impact protein structure, enzyme activity, and protein-protein and protein-nucleic acid interfaces. Characterizing the evolution of the virus in three dimensions provides testable insights into viral protein function and should aid in structure-based drug discovery efforts as well as the prospective identification of amino acid substitutions with potential for drug resistance.

Evolution of the SARS-CoV-2 proteome in three dimensions (3D) during the first six months of the COVID-19 pandemic.

Three-dimensional structures of SARS-CoV-2 and other coronaviral proteins archived in the Protein Data Bank were used to analyze viral proteome evolution during the first six months of the COVID-19 pandemic. Analyses of spatial locations, chemical properties, and structural and energetic impacts of the observed amino acid changes in >48,000 viral proteome sequences showed how each one of the 29 viral study proteins have undergone amino acid changes. Structural models computed for every unique sequence variant revealed that most substitutions map to protein surfaces and boundary layers with a minority affecting hydrophobic cores. Conservative changes were observed more frequently in cores versus boundary layers/surfaces. Active sites and protein-protein interfaces showed modest numbers of substitutions. Energetics calculations showed that the impact of substitutions on the thermodynamic stability of the proteome follows a universal bi-Gaussian distribution. Detailed results are presented for six drug discovery targets and four structural proteins comprising the virion, highlighting substitutions with the potential to impact protein structure, enzyme activity, and functional interfaces. Characterizing the evolution of the virus in three dimensions provides testable insights into viral protein function and should aid in structure-based drug discovery efforts as well as the prospective identification of amino acid substitutions with potential for drug resistance.

Compositional Dependence of Pore Structure, Strengthand Freezing-Thawing Resistance of Metakaolin-Based Geopolymers.

The understanding of the composition dependent properties and freezing-thawing (F-T) resistance of geopolymer materials is vital to their applications in cold regions. In this study, metakaolin-based geopolymer (MKG) mortars were fabricated by controlling the Si/Al ratio and the Na/Al ratio. The pore structure and strength were measured by mercury intrusion porosimetry and compression tests, respectively, which both showed obvious correlations with the material composition. Mass loss, strength loss, visual rate, and microscopic observation were adopted to assess the changes of the material properties and microstructure caused by F-T loads. The results showed that the strength-porosity relationship roughly followed a linear plot. Increases of the Si/Al ratio increased the capillary pore volume, but decreased the gel pore volume and the F-T resistance. Increases of the Na/Al ratio decreased the gel pore, but roughly enhanced the F-T resistance. The MKG mortar at the Na/Al ratio of 1.26 showed the lowest total pore volume and the best F-T resistance. The mechanisms of our experimental observations were that the abundantly distributed air voids connected by the capillary pores facilitated the relaxation of hydraulic pressures induced by the freezing of the pore liquid. The findings of this work help better clarify the compositional dependence of the pore structure, strength, and freezing-thawing resistance of MKG materials and provide fundamental bases for their engineering applications in cold regions.

A facile method for the preparation of chitosan-based scaffolds with anisotropic pores for tissue engineering applications.

To date, great efforts have been made to prepare different kinds of isotropic tissue engineering (TE) scaffolds. However, little attention has been paid to anisotropic porous scaffolds in spite of many examples of their excellent performances. In this work, a facile method termed "ammonia-induced method" (AIM) was proposed and applied to generate anisotropic pores in chitosan (CS)-based scaffolds. The pore structures of these scaffolds were studied in detail. In order to clarify the rationale behind this process, a speculative explanation was provided on basis of the experimental results and the theory of Uras (Uras & Devlin, 2000). Compression tests indicated that the mechanical strengths of these scaffolds were sufficient for TE applications. In vitro cell culture showed that MC3T3-E1 cells cultivated in the pores of these scaffolds had positive proliferation potential. We anticipated that this novel AIM could inspire research not only in TE but also in other fields.

Effect of ancillary ligands on the interaction of ruthenium(II) complexes with the triplex RNA poly(U)·poly(A)*poly(U).

Two new Ru(II) complexes with 1,8-naphthalimide group, [Ru(phen)2(pnip)](2+) (Ru1; phen=1,10-phenanthroline, pnip=2-[N-(p-phenyl)-1,8-napthalimide]imidazo[4',5'-f][1,10]phenanthroline) and [Ru(bpy)2(pnip)](2+) (Ru2; bpy=2,2'-bipyridine), have been synthesized and characterized. The interactions of Ru1 and Ru2 with the triplex RNA poly(U)•poly(A)*poly(U) (where • denotes the Watson-Crick base pairing and * denotes the Hoogsteen base pairing) were studied by various biophysical. Electronic spectra established that the binding affinity for Ru1 was greater than that for Ru2. Fluorescence and viscosity studies gave convincing evidence for a true intercalative binding of both complexes with the RNA triplex. UV melting studies confirmed that the two complexes could stabilize the triplex, whereas the effects of the two complexes on the stability of the Hoogsteen base-paired strand ploy(U) and the Watson-Crick base-paired duplex poly(U)•poly(A) of the triplex were different. In the case of Ru1, the increase of the thermal stability of the Hoogsteen base-paired strand was stronger than that of the Watson-Crick base-paired duplex. However, an opposite effect was observed in the case of Ru2. Circular dichroic studies suggested that the RNA triplex undergoes a conformational transition in the presence of Ru1, whereas the helicity of the RNA triplex still remains A-type in the presence of Ru2. The main results obtained here further advance our knowledge on the interaction of RNA triple-stranded structures with metal complexes, particularly ruthenium(II) complexes.

Binding properties of Ru(II) polypyridyl complexes with poly(U)·poly(A)*poly(U) triplex: the ancillary ligand effect on third-strand stabilization.

The binding properties of [RuL(2)(mip)](2+) {where L is 1,10-phenanthroline (phen) or 4,7-dimethyl-1,10-phenanthrollne (4,7-dmp) and mip is 2'-(3",4"-methylenedioxyphenyl)imidazo[4',5'-f][1,10]phenanthroline} with regard to the triplex RNA poly(U)·poly(A)*poly(U) were investigated using various biophysical techniques and quantum chemistry calculations. In comparison with [Ru(4,7-dmp)(2)(mip)](2+), remarkably higher binding affinity of [Ru(phen)(2)(mip)](2+) for the triplex RNA poly(U)·poly(A)*poly(U) was achieved by changing the ancillary ligands. The stabilization of the Hoogsteen-base-paired third strand was improved by about 10.9 °C by [Ru(phen)(2)(mip)](2+) against 6.6 °C by [Ru(4,7-dmp)(2)(mip)](2+). To the best of our knowledge, [Ru(phen)(2)(mip)](2+) is the first metal complex able to raise the third-strand stabilization of poly(U)·poly(A)*poly(U) from 37.5 to 48.4 °C. The results reveal that the ancillary ligands have an important effect on third-strand stabilization of the triplex RNA poly(U)·poly(A)*poly(U) when metal complexes contain the same intercalative ligands.

Biophysical insights into the interaction of Ru(II) polypyridyl complexes with the RNA triplex poly(U)•poly(A)*poly(U). Intercalative ligand shape effect on third-strand stabilization.

To explore the correlating thermodynamic factors to the structural aspects that account for the stability of the RNA triplex, two functional Ru(II) complexes containing the same ancillary ligands and different intercalative ligands, [Ru(bpy)(2)(mip)](2+) (bpy=2,2'-bipyridine, mip=2'-(3",4"-methylene-dioxyphenyl)imidazo[4',5'-f][1,10]phenanthroline) and [Ru(bpy)(2)(bdip)](2+) (bdip=2-(1,3-benzodioxol-4-yl)-1H-imidazo[4,5-f][1,10]phenanthroline) have been synthesized. The binding properties of [Ru(bpy)(2)(mip)](2+) and [Ru(bpy)(2)(bdip)](2+) to the RNA triplex poly(U)•poly(A)*poly(U) have been investigated by various biophysical techniques and quantum chemistry calculations. Compared with [Ru(bpy)(2)(bdip)](2+), remarkably higher binding and stabilization of the triplex RNA structure by [Ru(bpy)(2)(mip)](2+) is achieved upon changing the substituent positions on the intercalative ligand. The result reveals that the intercalative ligand shape plays a critical role in third-strand stabilization.