RESUMO
The corrosion performance of metals is closely related to their durability. Available studies on metal corrosion have seldom focused on the interfacial reaction behaviour influenced by a conductive medium under different temperatures. In this work, a laboratory corrosion simulation environment has been designed for EIS measurements to investigate the electrochemical behaviour of copper immersed in distilled water in different temperature environments. The relationship between the mathematical model of impedance response and the equivalent circuit model is determined based on electrochemical kinetics theory. The complex process of the dielectric properties of distilled water affected by temperature is analysed, and a simple method for calculating the kinetic parameters is presented. The experimental and model results have a good fit, and the analysis results indicate that the semicircle in the high-frequency region of the complex impedance curve represents the charge transfer process of the conductive medium. The decrease in temperature is the major factor that inhibits the rate of dissolution and passivation, resulting in the change rate of surface coverage slowing down, until the attenuation of the mass transfer process of the conductive medium dominates the full range of AC frequencies. This model provides an improved approach for determining physical parameters based on electrochemical impedance spectroscopy to characterize the electrochemical properties of materials.
RESUMO
In this study, X80 pipeline steel was embedded in silty soil with different salinities and subjected to corrosion at a constant temperature for 24 h before electrochemical testing. The effect of soil medium, temperature, and salt content on the kinetics of corrosion behavior of X80 steel was analyzed. Furthermore, the compositions and structures of the corrosion products were analyzed by X-ray photoelectron spectroscopy and scanning electron microscopy. Based on the results, the anodic dissolution reaction mechanism of X80 steel in silty soil was determined, the differences in the corrosion process caused by different soil systems were comprehensively contrasted, and the impact of the migration process of heterogeneous silty soil on corrosion behavior under different conditions was systematically explored. Comparative analysis revealed that chloride ions possess strong adsorption ability at temperatures above freezing point and that more oxidized substances are present in the deposited layer on the surface of corroded steel, which facilitates the occurrence of corrosion under deposition. At temperatures below freezing point, the sulfate ions present in the pore solution contribute to crystallization-induced expansion and lead to swelling and deformation of the soil, rendering the X80 steel more prone to corrosion in sulfate corrosion environments.
RESUMO
Surface texture (ST) has been confirmed as an effective and economical surface treatment technique that can be applied to a great range of materials and presents growing interests in various engineering fields. Ti6Al4V which is the most frequently and successfully used titanium alloy has long been restricted in tribological-related operations due to the shortcomings of low surface hardness, high friction coefficient, and poor abrasive wear resistance. Ti6Al4V has benefited from surface texture-based surface treatments over the last decade. This review begins with a brief introduction, analysis approaches, and processing methods of surface texture. The specific applications of the surface texture-based surface treatments for improving surface performance of Ti6Al4V are thoroughly reviewed from the point of view of tribology and biology.
