Influence of cathode materials on thermal characteristics of lithium-ion batteries.

In this work, the thermal stability of four types of 18,650 lithium-ion batteries with LiCoO2 (LCO), LiFePO4 (LFP), LiNi0.8Co0.1Mn0.1O2 (NCM811) and LiNi0.8Co0.15Al0.05O2 (NCA) materials as cathodes are experimentally investigated by the accelerating rate calorimeter (ARC) and the isothermal battery testing calorimeter (iso-BTC) under adiabatic and isothermal conditions, respectively. The thermal runaway danger level of these batteries can be ranked as LCO > NCA > NCM811 >> LFP by judging from the values of Tmax and HRmax, nominal. The higher the nickel and cobalt content, the higher the lithium-ion battery capacity, but the worse the thermal stability. The Qtotal of NCA is the largest in the complete standard charge and discharge process, due to that the capacity of NCA is significantly higher than that of the other three batteries, resulting in remarkable increase in Qirre proportioned to the square of the current. When the ambient temperature rises, the energy release decreases owing to the decrease in the internal resistance of the battery. These studies are expected to have important implications for the subsequent safe design of commercial lithium-ion batteries with different cathode materials.

Fabrication of highly dispersed Pd-Mn3O4 catalyst for efficient catalytic propane total oxidation.

Adjusting the interaction between dual active components for enhancing volatile organic compounds (VOCs) degradation is an effective but still challenging means of air pollution control. Herein, a limited pyrolysis oxidation strategy was adopted to prepare Pd-Mn3O4 spinel catalysts with uniform morphology and active component dispersion. Among these, 1.08Pd-Mn3O4 presented the highest catalytic efficiency with a T90 value of 240 °C, which was 94 °C lower than that of Mn3O4. Characterization and density functional theory (DFT) calculation results revealed that the strong metal-support interaction (SMSI) effect between Pd and Mn3O4 promoted the redistribution of surface charges, thus strengthening the oxidation-reduction ability of the active sites. Moreover, the SMSI effect led to a better migration of surface oxygen species, and boosted the generation of active surface oxygen species. Simultaneously, the Pd catalyst further reduced the energy barrier in the initial stage of the dehydrogenation of propane. Overall, this study provided a novel design strategy for dual active components catalysts with SMSI effect and extended the application of these catalysts in the important field of VOCs elimination.

Urea-H2O2 defect engineering of δ-MnO2 for propane photothermal oxidation: Structure-activity relationship and synergetic mechanism determination.

Photothermal catalysis has an advantage in effective and economical elimination technology of volatile organic compounds (VOCs) in the ascendant. Herein, various surface defect engineering routes were adopted to enhance the low-temperature propane oxidation of δ-MnO2. Compared to reducing etchants urea and vitamin C, δ-MnO2 treated with urea - H2O2 exhibited an excellent thermal (T90 = 240 ℃) and photothermal (T90 = 196 ℃) activities of propane oxidation. Urea - H2O2 treatment provided high concentration of Mn4+ and surface-active oxygen (Mn4+-Osur) species as surface-active sites, and produced numerous oxygen vacancies to improve charge separation and superoxide species generation capacity. Thus, the photothermal conversion efficiency and low-temperature reducibility were remarkably enhanced. Furthermore, the photothermal synergistic catalytic mechanism was proposed based on in-situ diffuse reflectance infrared Fourier transform spectroscopy and control experiments. The strategy here offered insight into the rational design of efficient transition catalysts, and in-depth understanding of the photothermal catalytic VOCs removal mechanism.

Determination of the Peptide AWRK6 in Rat Plasma by Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) and Its Application to Pharmacokinetics.

AWRK6 was a synthesized peptide developed based on the natural occurring peptide dybowskin-2CDYa, which was discovered in frog skin in our previous study. Here, a quantitative determination method for AWRK6 analysis in rat plasma by using liquid chromatography-tandem mass spectrometry (LC-MS/MS) was established and validated following U.S. FDA guidelines. A combination of plasma precipitation and liquid-liquid extraction was applied for the extraction. For pharmacokinetics study, the rats were administrated with AWRK6 via intraperitoneal and intravenous injection. The prepared plasma samples were separated on an ODS column and analyzed by tandem MS using precursor-to-product ion pairs of m/z: 533.4→84.2 for AWRK6 and m/z: 401.9→101.1 for internal standard Polymyxin B sulfate in multiple reaction monitoring mode. AWRK6 concentrations in rat plasma peaked at about 1.2 h after intraperitoneal injections at 2.35, 4.7 and 9.4 mg/kg bodyweight. The terminal half-life was around 2.8 h. The absolute bioavailability of AWRK6 was 50% after 3 doses via injection, and the apparent volume of distribution was 4.884 ± 1.736 L. The obtained determination method and pharmacokinetics profiles of AWRK6 provides a basis for further development, and forms a benchmark reference for peptide quantification.

Efficient Delivery of Therapeutic siRNA by Fe3O4 Magnetic Nanoparticles into Oral Cancer Cells.

The incidence of oral cancer is increasing due to smoking, drinking, and human papillomavirus (HPV) infection, while the current treatments are not satisfactory. Small interfering RNA (siRNA)-based therapy has brought hope, but an efficient delivery system is still needed. Here, polyethyleneimine (PEI)-modified magnetic Fe3O4 nanoparticles were prepared for the delivery of therapeutic siRNAs targeting B-cell lymphoma-2 (BCL2) and Baculoviral IAP repeat-containing 5 (BIRC5) into Ca9-22 oral cancer cells. The cationic nanoparticles were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), dynamic light scattering (DLS), and vibrating sample magnetometer (VSM). By gel retardation assay, the nanoparticles were found to block siRNA in a concentration-dependent manner. The cellular uptake of the nanoparticle/siRNA complexes under a magnetic field was visualized by Perl's Prussian blue staining and FAM labeling. High gene silencing efficiencies were determined by quantitative real-time PCR and western blotting. Furthermore, the nanoparticle-delivered siRNAs targeting BCL2 and BIRC5 were found to remarkably inhibit the viability and migration of Ca9-22 cells, by cell counting kit-8 assay and transwell assay. In this study, we have developed a novel siRNA-based therapeutic strategy targeting BCL2 and BIRC5 for oral cancer.

PEI-Coated Fe3O4 Nanoparticles Enable Efficient Delivery of Therapeutic siRNA Targeting REST into Glioblastoma Cells.

Glioblastomas (GBM) are the most frequent brain tumors lacking efficient treatment. The increasingly elucidated gene targets make siRNA-based gene therapy a promising anticancer approach, while an efficient delivery system is urgently needed. Here, polyethyleneimine (PEI)-coated Fe3O4 nanoparticles (NPs) have been developed and applied for siRNA delivery into GBM cells to silence repressor element 1-silencing transcription factor (REST). The prepared PEI-coated Fe3O4 NPs were characterized as magnetic nanoparticles with a positive charge, by transmission electronic microscopy, dynamic light-scattering analysis and a magnetometer. By gel retardation assay, the nanoparticles were found to form complexes with siRNA and the interaction proportion of NP to siRNA was 2.8:1. The cellular uptake of NP/siRNA complexes was verified by prussian blue staining, fluorescence labeling and flow cytometry in U-87 and U-251 GBM cells. Furthermore, the REST silencing examined by realtime polymerase chain reaction (PCR) and Western blotting presented significant reduction of REST in transcription and translation levels. Upon the treatment of NP/siRNA targeting REST, the GBM cell viabilities were inhibited and the migration capacities were repressed remarkably, analyzed by cell counting kit-8 and transwell assay separately. In this study, we demonstrated the PEI-coated Fe3O4 nanoparticle as a vehicle for therapeutic siRNA delivery, at an appropriate NP/siRNA weight ratio for REST silencing in GBM cells, inhibiting cell proliferation and migration efficiently. These might represent a novel potential treatment strategy for GBM.

Catalytic dechlorination of carbon tetrachloride in liquid phase with methanol as H-donor over Ag/C catalyst.

Catalytic hydrodechlorination of carbon tetrachloride (CCl4) is an effective measure to remove CCl4 due to its pollutant character. The dechlorination of CCl4 to dichloromethane (CH2Cl2) and chloroform (CHCl3) with a molar ratio of 3:2 was catalyzed by carbon-supported silver (Ag/C) catalyst in methanol solution. It was proposed from the catalytic results and characterization (X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy) data that, the chloride ion is abstracted from adsorbed CCl4 by Ag to form CCl3 and CCI2 radicals and silver chloride (AgCl), and meanwhile the dehydrogenation of methanol over Ag domains intrigues initial active Ag-H species and formaldehyde (HCHO); then the CCI3 and CCI, radicals are combined with Ag-H to generate reaction products (CHCl3 and CH2Cl2) and Ag, and the dehydrogenated product HCHO facilitates the regeneration of formed AgCl to Ag with formation of carbon monoxide and hydrogen chloride. The catalyst can be recovered and recycled, and there was no significant decrease in catalytic activity and selectivity after 4th recycling.

A mesoporous silica nanocomposite shuttle: pH-triggered phase transfer between oil and water.

With a simple protocol, we synthesize a novel mesoporous silica nanocomposite shuttle that can reversibly transfer between an organic phase and water in response to the pH, due to the switchable surface hydrophobicity/hydrophilicity. Our synthesis protocol allows the phase transfer ability to be tuned in a controllable fashion. This nanocomposite shuttle exhibits a good ability to load various cargoes such as Pd(OAc)2, Pd nanoparticles, and organic molecules. The built-in properties of the nanocomposite shuttle lay the foundations for many innovative applications. As a proof of concept, we successfully demonstrate its application in separating and recycling Pd nanoparticle catalysts. The composite shuttle can take Pd nanoparticles to an organic phase for catalyzing hydrogenation of olefins and come back to an aqueous phase at the end of reaction, making in situ separation and recycling of nanocatalysts possible. This pH-driven round trip for catalysis can be repeated several times. Our investigations not only supply a novel nanocomposite shuttle with controllable properties but also open an innovative avenue to in situ separation and recycling of nanocatalysts, which can address the obstacles of the conventional methods such as centrifugation and filtration.

Engineering the formation of secondary building blocks within hollow interiors.

Secondary building blocks within the cavities of primary silica-architecture building blocks are successfully engineered. The immobilized surfactant directs the selective dissolution and reassembly of dissolved silicate species for the formation of secondary building blocks (hollow nanospheres/nanorods; see figure). Supported TiO(2) on nanostructures with multilevel interiors is shown to exhibit significantly enhanced activity in photocatalytic H(2) production.

A hierarchical Fe/ZSM-5 zeolite with superior catalytic performance for benzene hydroxylation to phenol.

We report the one-step synthesis of a highly active hierarchical Fe/ZSM-5 zeolite catalyst with a strongly improved lifetime in the selective hydroxylation of benzene to phenol with nitrous oxide; compared to the best Fe/ZSM-5 catalyst, the turnover number after 24 h on stream is almost four times higher.

Effect of aluminum on the nature of the iron species in Fe-SBA-15.

We report the preparation of highly ordered mesoporous Fe-Al-SBA-15 with isolated extraframework Fe species under acidic conditions. The materials were characterized by means of UV resonance Raman spectroscopy, in conjunction with BET, XRD, TEM, UV-vis, H2-TPR, FT-IR, and 27Al MAS NMR spectroscopy. The addition of both Fe and Al to the synthesis gel of SBA-15 results in the formation of isolated extraframework Fe species located close to the framework Al ions and the Fe content an order of magnitude higher than that in Fe-SBA-15 synthesized without Al. The existence of anchored extraframework Fe species was confirmed by the presence of a strong absorption band at 270 nm, hydrogen reduction at relatively low temperature, and the presence of a resonance Raman band at 1140 cm(-1). The location of Fe in close proximity to framework Al nuclei is further supported by 27Al MAS NMR measurements. Two characteristic UV Raman bands at 510 cm(-1) and 1090 cm(-1) excited by 244-nm laser are assigned to Fe-O-Si symmetric and asymmetric stretching modes of isolated tetrahedral Fe ions in the silica framework for Fe-SBA-15. The resonance Raman band at 1140 cm(-1) excited by 325-nm laser is attributed to the asymmetric stretching mode of the isolated extraframework iron species in Fe-Al-SBA-15. The isolated Fe species close to framework Al species are stable in acidic HCl solution, whereas the majority of Fe species in Fe-SBA-15 can be easily removed.