Optimization of One-Time Fertilization Scheme Achieved the Balance of Yield, Quality and Economic Benefits of Direct-Seeded Rice.

There is limited information available to assess the impact of one-time fertilization on the yield, quality, and economic benefits of direct-seeded rice. This study reports the effects of three one-time fertilizer treatments (BBU1, BBU2, and BBU3) on the yield, quality, and economic benefits of direct-seeded rice, where controlled-release nitrogen (N) fertilizer (CRNF) provided 50%, 60%, and 70% of the total N (270 kg N ha-1), and the control treatment (CK) was a split application of conventional urea (CU). The results showed that the yield of direct-seeded rice decreased significantly (p < 0.05) with the increased application ratio of CRNF under one-time fertilization, which was mainly related to N accumulation between the heading time and maturity stages. Compared to CK, the one-time fertilization treatments (BBU1, BBU2, and BBU3) maintained high milling quality, with significantly reduced chalkiness (p < 0.05), which could be related to the slow rate of N release from the CRNF. In addition, the one-time fertilization treatments reduced the protein content and increased the amylose content of the milled rice, which significantly improved the eating quality (p < 0.05). Furthermore, there was no significant difference in yield and economic benefit between BBUI and CK (p > 0.05). Overall, CRNF replacing conventional urea with 50% total N could be helpful to reduce fertilization frequency, achieve high yield and high economic efficiency, and improve rice quality of direct-seeded rice under one-time fertilization.

Evaluation and Improvement of Greenness for Milling AL6061 Alloy through Life Cycle Assessment and Grey Relational Analysis.

Modern manufacturing industries thrive on greenness, which means ensuring acceptable environmental impacts and required surface quality of the products during the manufacturing process. However, there is a conflict between surface quality and environmental performances in the milling process. The current research only considers energy consumption rather than total environmental impacts. In this respect, this research focuses on the multiobjective optimization of machining parameters for balancing the surface quality (i.e., surface roughness, Ra) and total environmental impact (TEI), which includes raw materials usage, energy consumption, and output pollutant emission during the milling of AL6061 alloy. First, life cycle assessment (LCA) of the milling process is used for evaluating the TEI. Then, multiobjective optimization is conducted using Grey Relational Analysis. The results indicated that the improvement of Ra and TEI can be achieved with higher cutting speed, higher depth, and wet conditions in milling. The optimization work showed that cutting speed of 165 m/min, feed rate of 0.28 mm/rev, depth of cut of 2 mm, and width of cut of 3 mm are the optimal combination among existing experiments. Compared to single objective optimization results, multiple responses (Ra and TEI) can be improved simultaneously.

Effects of mid-stage nitrogen application timing on the morphological structure and physicochemical properties of japonica rice starch.

BACKGROUND: Nitrogen management of crops, especially when mid-stage nitrogen is applied, is a key factor affecting the yield and grain quality of rice (Oryza sativa). Here, the timing of mid-stage nitrogen application was evaluated for its effect on rice grain quality by assessing the morphological structure and physicochemical properties of starch from two japonica rice cultivars growing in fields (Nangeng 9108 and Nangeng 5055). RESULTS: The experiment was arranged in a split-plot design, with the two rice cultivars as the main plot factor and three timings of mid-stage nitrogen application as the within-plot factor. Briefly, three applications were made: at the emergence of the top-sixth-leaf (ahead), the top-fourth-leaf (normal), and the top-second-leaf (delayed) of the main stem. Delaying mid-stage nitrogen application caused the starch granule surface to become uneven and significantly reduced its particle size, whereas it increased the polished rice rate, chalkiness degree, and protein content. Furthermore, the apparent amylose content decreased with a delay in mid-stage nitrogen application, thereby resulting in higher relative crystallinity, swelling power, water solubility, gelatinization enthalpy, and low retrogradation. Finally, we also found that delaying this nitrogen application lowered the characteristic values of rice flour viscosities, leading to cooking quality deterioration. CONCLUSION: These results therefore suggest that delaying mid-stage nitrogen application enhances the processing and nutritional qualities of japonica rice but evidently has an adverse effect upon its appearance and cooking qualities. © 2020 Society of Chemical Industry.

Investigation of the Thermal Conductivity of Resin-Based Lightweight Composites Filled with Hollow Glass Microspheres.

The design and development of thermal insulation materials is very important for the treatment of offshore oil pipelines. Understanding thermal energy transport in thermal insulation materials and predicting their thermal conductivities have important theoretical and practical value for the design of thermal insulation materials. In this work, lightweight and thermally insulated (LWTI) composites with the desired mechanical strength for offshore oil pipelines applications were prepared using epoxy resin (EP) as the matrix and hollow glass microspheres (HGMs) as the filler. The morphology, density, and mechanical properties of HGM/EP LWTI composites were studied first. The flexural strength and the flexural modulus of HGM/EP LWTI composites could still be as high as 22.34 ± 2.75 Mpa and 1.34 ± 0.03 GPa, respectively, while the density was only 0.591 g/cm3. The relationship between the effective thermal conductivity of HGM/EP LWTI composites and material parameters (sizes and contents together) has been studied systematically. A three-phase prediction model was built using the self-consistent approximation method to predict the effective thermal conductivity of HGM/EP LWTI composites, and the resin matrix, the wall thickness, the HGM particle size, and other parameters (such as air) were fully considered during the derivation of this three-phase thermal conductivity model. Finally, the insulation mechanism of HGM/EP LWTI composites was systematically analyzed. The thermal conductivities of HGM/EP LWTI composites with different diameters and HGM contents calculated by the three-phase prediction model agreed well with the experimental test results, with a minimum error of only 0.69%. Thus, this three-phase thermal conductivity model can be used to theoretically simulate the thermal conductivity of epoxy resin-based LWTI composites and can be the theoretical basis for the design and prediction of the thermal conductivity of other similar hollow spheres filled materials.