RESUMO
Aerobic fermentation is an effective technique for the large-scale processing of tobacco waste. However, the specificity of the structure and composition of tobacco-derived organic matter and the toxic alkaloids in the material make it currently difficult to directly use microbial agents. In this study, a functional strain FYZ1-3 was isolated and screened from thermophilic phase samples of tobacco waste composting. This strain could withstand temperatures as high as 80°C and grow normally at 0.6% nicotine content. Furthermore, it had a strong decomposition capacity of tobacco-derived starch and protein, with amylase activity of 122.3 U/mL and protease activity and 52.3 U/mL, respectively. To further understand the mechanism of the metabolic transformation of the target, whole genome sequencing was used and the secondary metabolite gene cluster was predicted. The inhibitory effect of the strain on common tobacco fungi was verified using the plate confrontation and agar column methods. The results showed that the strain FYZ1-3 was Bacillus subtilis, with a genome size of 4.17 Mb and GC content of 43.68%; 4,338 coding genes were predicted. The genome was annotated and analyzed using multiple databases to determine its ability to efficiently degrade starch proteins at the molecular level. Moreover, 14 functional genes related to nicotine metabolism were identified, primarily located on the distinct genomic island of FYZ1-3, giving a speculation for its nicotine tolerance capability on the molecular mechanism. By mining the secondary metabolite gene cluster prediction, we found potential synthetic bacteriocin, antimicrobial peptide, and other gene clusters on its chromosome, which may have certain antibacterial properties. Further experiments confirmed that the FYZ1-3 strain was a potent growth inhibitor of Penicillium chrysogenum, Aspergillus sydowii, A. fumigatus, and Talaromyces funiculosus. The creation and industrial use of the functional strains obtained in this study provide a theoretical basis for its industrial use, where it would be of great significance to improve the utilization rate of tobacco waste.
RESUMO
Natural antioxidants derived from agricultural by-products have great promise and ecological advantages in the treatment of oxidative stress-related diseases. The eggshell membrane (ESM) from hatched eggs, i.e., the hatched ESM, is a globally abundant agricultural byproduct, and its high-value utilization has been rarely studied compared to the well-studied ESM from fresh eggs. In this research, we systematically characterized the hatched ESM as a novel source of antioxidant hydrolysates and explored their potential role in H2O2-induced human chondrocytes. The results showed that the hatched ESM is a protein-rich fibrous mesh material with a significantly different structure and composition from those of fresh ESM. Enzymatic hydrolysis of hatched ESM can produce antioxidant hydrolysates rich in low molecular weight (MW) peptides, which mainly derived from the Lysyl oxidase homolog by Nano-LC-MS/MS analysis. The peptide fraction with MW < 3 kDa (HEMH-I) exhibited the highest DPPH radical scavenging, Fe2+-chelating, and Fe3+-reducing abilities. In H2O2-induced human SW1353 chondrocytes, HEMH-I treatment significantly increased the cell viability and ameliorated oxidative stress, inflammatory response, and cartilage matrix degradation by reducing the level of ROS, matrix metalloprotease 3 (MMP3), MMP13, and IL-6, and by promoting the expression of SOD and type II collagen, potentially through activating the cellular Keap1/Nrf2/HO-1 pathway. This study provides a theoretical basis for the value-added application of hatched ESM waste to produce antioxidant hydrolysates and indicates their potential as functional food and pharmaceuticals.
RESUMO
Eggshell membranes (ESM) from fresh and hatched chicken eggs are important agricultural byproducts. In this study, we investigated the antioxidant and cytoprotective activity of hydrolysates from fresh and hatched ESM, identified the antioxidant peptides and explored their potential molecular mechanism using a combined in silico and in vitro approach. The results showed that the hydrolysates fractions (MW < 3 kDa) of both ESM exhibited excellent antioxidant effects and could protect H2O2-induced RAW264.7 cells by reducing ROS and MDA levels involving the modulation of the Keap1-Nrf2 pathway. Six novel peptides identified by integrated approaches of peptidomics and in silico bioinformatic analysis were synthesized, exhibiting significantly higher ORAC values (629.41-1823.77 µmol TE/mmol) than GSH (397.21 µmol TE/mmol). Among these, KPLCPP, MDGWPR, and LWNPR possessed stronger ABTS scavenging and cytoprotective activities than GSH. All the six peptides could dock onto the Keap1-Kelch domain. Moreover, KPLCPP and LWNPR could regulate the Keap1-Nrf2 pathway and induced the overexpression of antioxidant enzymes including HO-1, SOD and GSH-Px. With the molecular docking and western blot analysis, the underlying molecular mechanism of the ESM antioxidant peptides might be related to the activation of Keap1-Nrf2 pathway by occupying the Nrf2-binding site on Keap1. This study provides a theoretical basis for the application of fresh and hatched ESM antioxidant peptides in functional foods, as well as insights for the identification and the mechanisms research of more food-derived antioxidant peptides.
Assuntos
Antioxidantes , Fator 2 Relacionado a NF-E2 , Animais , Antioxidantes/metabolismo , Antioxidantes/farmacologia , Citoproteção , Casca de Ovo , Peróxido de Hidrogênio/metabolismo , Proteína 1 Associada a ECH Semelhante a Kelch/metabolismo , Simulação de Acoplamento Molecular , Fator 2 Relacionado a NF-E2/metabolismo , Estresse Oxidativo , Peptídeos/metabolismo , Peptídeos/farmacologiaRESUMO
This study focuses on the effect of the mixture (XO/EW) of xylooligosaccharides (XO) and egg white protein (EW) on the physicochemical properties, conformation, and gel-forming ability of Culter alburnus myofibrillar proteins (MP) during multiple freeze-thaw (FT) cycles. In our methodology, MP samples added with EW, XO, or XO/EW mixture (1%, v/v) are prepared, and after multiple FT cycles, the XO or XO/EW-treated samples show significant (p < 0.05) inhibition on the decrease of sulfhydryl content and the increase of carbonyl content of MP. Compared with EW, XO or XO/EW could delay the increase of surface hydrophobicity and the decline of secondary and tertiary structural properties of MP, indicating that XO or XO/EW could more effectively increase the stability of MP conformation. Meanwhile, XO/EW could more effectively reduce the decrease of gel strength and gel water holding capacity, and the increase in the T2 relaxation time of MP gel, confirming that XO/EW could substantially improve the MP gel-forming ability. Analysis of intermolecular interaction force proves that, compared with EW, XO/EW could reduce the content decrease of ionic and hydrogen bonds in MP gel. Overall, XO/EW could improve the stability of MP functional properties over multiple FT cycles. This study provides a new perspective for the potential commercial application of EW as a low-calorie cryoprotectant in aquatic products.
RESUMO
Sustainable bio-based adhesive is a promising substitute for petroleum-based adhesives to alleviate serious environmental and health problems. In this work, a nanoengineered starch-based adhesive was fabricated by grafting vinyl acetate (VAc) onto starch molecule and subsequently incorporating the functional nanoparticle [TiO2-coupling-poly(butyl acrylate, BA), TKB] to overcome the drawbacks present in conventional nanocomposite adhesive. Results showed that the presence of BA altered the surface property of TKB, leading to improved dispersion. In the adhesive with 4% (mass ratio to starch) TKB, TKB aggregates played the role as a sliding bridge, which significantly promoted the storage stability and shear strength in both dry and wet states. Additionally, the latex film with 4% TKB exhibited high compatibility and water resistance due to the promoted hydrophobicity. This study provides a fundamental insight into the improvement of functional nanoparticles on the performance of starch-based adhesive, suggesting a novel strategy for designing high-performance bio-adhesive.
RESUMO
In our previous work, dynamic high-pressure microfluidization (DHPM) treatment was shown to promote the interaction between chitosan (CS) and potato protein isolate (PPI), but the modification mechanism of DHPM treatment (6 k-12 k psi) on PPI and its complex with CS remains to be elucidated. Here, moderate DHPM treatment (≤9k psi) was found to decrease the particle size, increase the surface charge, and improve the solubility of PPI and its emulsifying and foaming properties. The PPI functional properties were further improved by CS addition followed by DHPM treatment. The ultraviolet and fluorescence spectral results showed that DHPM treatment could destroy the PPI molecularstructure, while CS addition could provide a protective mechanism against PPI damage, which was also proved by the surface hydrophobicity. The circular dichroism spectral analysis exhibited that DHPM treatment could convert different types of secondary structures by disrupting the PPI intermolecular hydrogen bonds, while CS addition could promote the formation of hydrogen bonds in the system, which was also demonstrated by infrared spectroscopy. The sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) results exhibited that DHPM treatment (≤12 k psi) was not sufficient to reduce the PPI molecular mass, while DHPM treatment (6 k-12 k psi) could destroy the structure of CS/PPI complex. The thermodynamic analysis showed that the PPI thermodynamic stability could be improved by DHPM treatment, but decreased by CS addition plus DHPM treatment. These results showed that DHPM treatment has a good potential to modify the PPI and CS/PPI complex.
Assuntos
Quitosana , Solanum tuberosum , Interações Hidrofóbicas e Hidrofílicas , Pressão , SolubilidadeRESUMO
This study aims to investigate the influence of the mixture (CGO/EWP) of carrageenan oligosaccharide (CGO) and egg white protein (EWP) (CGO/EWP, CGO: EWP = 1:1, m/m) on the functional, structural, and gelling properties of Culter alburnus myofibrillar protein (MP) during repeated freezing-thawing cycles by treating MP samples separately with EWP, CGO, or CGO/EWP based on the wet weight (1%, m/m), using samples without any cryoprotectant as the blank group. After the second repeated freezing-thawing cycle, the sulfhydryl group content was found to be significantly (p < 0.05) higher in the CGO/EWP (30.57 nmol/mg) and CGO (36.14 nmol/mg) groups than in the EWP group (23.80 nmol/mg), indicating that CGO/EWP and CGO can more effectively delay the oxidative deterioration of functional groups. Additionally, the surface hydrophobicity was shown to be significantly lower in the CGO (25.74) and CGO/EWP (27.46) groups than in the EWP (34.66) and blank (39.32) groups. Moreover, the α-helix content was higher in the CGO (35.2%) and CGO/EWP (32.3%) groups than in the EWP (29.2%) and blank (25.0%) groups. These data indicated that CGO and CGO/EWP could more effectively increase the structural stability, thereby inhibiting the exposure of hydrophobic groups and curbing the decline of α-helix content. During the heat-induced gel-forming process, EWP and CGO/EWP could enhance the gel viscoelasticity and strength. After the second freezing-thawing cycle, when compared with the blank group, the CGO/EWP group showed significantly (p < 0.05) higher water-holding capacity (66.30% versus 53.93%) and shorter T22 relaxation time (413.56 versus 474.99 ms). The integrated results indicated that CGO/EWP could more effectively delay the decrease of protein-water molecular interaction forces in the MP gel. This study shed light on the mechanism of CGO/EWP as a cryoprotective mixture in improving the deterioration of MP gelation properties during repeated freezing-thawing cycles.
RESUMO
Protein oxidation is a critical process in the deterioration and spoilage of fish and related commodities during processing and storage. In this study, the hydroxyl radical generation system (HRGS) was used to simulate the effect of oxidation on the functional, conformational and gelling properties of topmouth culter (Culter alburnus) myofibrillar proteins (MP). Additionally, the effects of oxidation on the gel-forming abilities of MP were also systematically analyzed from the perspective of intermolecular interaction forces. Oxidation was shown to decrease the total sulfhydryl content, increase the surface hydrophobicity, and induce conformational changes in MP. Rheological analysis showed that oxidation reduced the gel strength. Water holding capacity (WHC) and low-field nuclear magnetic resonance (LF-NMR) analyses showed that low oxidation could enhance water binding of protein matrix, while high-degree oxidation could substantially reduce the gelling properties of MP. The selective solubility of MP gel proved that oxidation could reduce the content of ionic and hydrogen bonds and increase hydrophobic interactions. All the results indicate that oxidation could alter the intermolecular interactions between protein-protein and protein-water molecules, due to irregular unfolding and inhibition of the cross-linking of amino acid side chains, leading to reduction in the quality and function of fish and related products.
Assuntos
Fenômenos Químicos , Peixes , Proteínas Musculares/química , Oxirredução , Conformação Proteica , Animais , Interações Hidrofóbicas e Hidrofílicas , Espectroscopia de Ressonância Magnética , Reologia , Solubilidade , Relação Estrutura-AtividadeRESUMO
This work investigated the structure and self-assembly behavior of grafted starch (GS) prepared by grafting vinyl acetate (VAc) on the starch molecule. Our preliminary structure characterization, NMR, and quantum mechanical simulation demonstrated the C2 of the glucose unit as the main grafting site. The grafting frequency and chain length (starch, VAc) were calculated based on the result of gel permeation chromatography. Molecular dynamics simulation showed that, when compared with native starch, GS had less hydrogen bonding interaction, lower orderness, and higher extensibility, which were supported by the experimental results. In dissipative particle dynamics simulation, GS was shown to self-assemble into a core-shell structure (latex) and form a bridge structure with cross-linking interaction. The overall results indicate that chain entanglement and hydrogen bonding interaction of starch play a significant role in adhesive curing. This research provides a novel insight into the grafting and molecular interaction mechanism in the GS adhesive system.
Assuntos
Adesivos/química , Glicoconjugados/química , Látex/química , Amido/química , Compostos de Vinila/química , Cromatografia em Gel , Glucose/química , Humanos , Ligação de Hidrogênio , Espectroscopia de Ressonância Magnética , Simulação de Dinâmica Molecular , Teoria QuânticaRESUMO
In this study, we evaluated the possibility of dimethyldidodecylammonium bromide (DDAB)-modified graphene oxide quantum dots (DDAB-GOQDs) as a new compatibilizer to improve the compatibility of hydrophilic starch with hydrophobic polylactic acid (PLA) and ethylene-vinyl acetate-glycidylmethacrylate (EVA-GMA). The successful synthesis of DDAB-GOQDs was verified by Fourier transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM) and Zeta-Plus assay. The differential scanning calorimetry (DSC), polarized light optical microscopy (POM) and iso-thermal crystallization kinetics analysis showed that 0.25% DDAB-GOQDs could significantly increase the crystallization rate and nucleation density as well as reduce the spherulites size of the nanocomposites. Compared to pure composites, the nanocomposites containing 0.25% DDAB-GOQDs showed obvious enhancement in thermal stability and surface hydrophobicity, with an increase of ~22 °C and ~24.1° in the maximum decomposition temperature and contact angle, coupled with similar improvement in the storage modulus and UV-shielding capacity. Morphological analysis, FTIR and creep behavior experiments revealed that adding 0.25% DDAB-GOQDs enhanced the interface compatibility of the nanocomposites by promoting the formation of the interpenetrated network through strong polar hydrogen bond or electrostatic force within the polymeric components. Overall, (0.25%) DDAB-GOQDs can serve as an effective compatibilizer for the PLA/starch/EVA-GMA system due to improved crystallization, thermal stability, barrier properties and creep-resistance.
Assuntos
Compostos de Epóxi/química , Metacrilatos/química , Poliésteres/química , Amido/química , Compostos de Vinila/química , Varredura Diferencial de Calorimetria , Grafite , Nanocompostos/química , Nanocompostos/ultraestrutura , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
The purpose of this research was to investigate the cryoprotective role of EWP-XO in the prevention of oxidative and structural changes in the myofibrillar proteins (MPs). Different concentrations of egg white protein and xylooligosaccharide (EWP-XO) mixture (0, 2, 4 and 6%) were added to the MPs of Culter alburnus fish during frozen storage (-18 °C) of 60 days. During the study, it was observed that EWP-XO significantly (P < .05) reduced the Ca-ATPase activity, which is greatly related with tertiary structural changes. Meanwhile, carbonyl contents of MPs increased in line with frozen storage (control samples). Meanwhile, samples treated with 6% EWP-XO showed less increase in carbonyl content indicating the decreased protein oxidation. The addition of EWP-XO efficiently inhibited the decline in the sulfhydryl contents. Furthermore, through circular dichroism analysis it was confirmed that the addition of EWP-XO increased the secondary structural stability by preventing the reduction in α-helix content. Microstructural analysis confirmed the preservation of a well-structured protein network that reduced the porosity and protein aggregation of MPs gel. It was concluded that 6% EWP-XO was an effective cryoprotectant mixture, which preserved the functional and structural properties of Culter alburnus during 60 days of frozen storage period.
RESUMO
BACKGROUND: Potato powder, a rich source of high-quality protein and starch, plays an important role in the production of functional foods. In this study, ball-mill processed potato powders with different particle sizes (278, 208, 129, and 62 µm) were analyzed in terms of physicochemical, pasting, rheological, and digestive properties. RESULTS: Scanning electron microscopy and laser diffraction analysis of the samples revealed mono-model particle-size distributions. X-ray diffraction analysis confirmed structure destruction of starch pellets. Proximate composition and physical property analysis showed an increase in the water, ash, protein, and starch content. Meanwhile, the water solubility index and swelling power values were found to increase with decreasing grain size, and so were the brightness (L*) and redness (b*) values of the potato powders. With particle size reduced to 129 µm, large changes were observed in gelatinization properties, such as peak viscosity, trough viscosity, breakdown viscosity, and final viscosity. Oscillatory rheology results also showed that, with the decrease in particle size, the storage modulus (G') and loss modulus (Gâ³) improved, with highest storage modulus (G') observed in the 129 µm particle size. The hydrolysis rate and glycemic index also increased in the 129 µm potato powder. CONCLUSION: The results provide information that could be useful for improving quality characteristics by using specific grain sizes in the development of potato-based products such as gluten-free products and ethnic food products with particular functional and rheological properties. © 2020 Society of Chemical Industry.
Assuntos
Solanum tuberosum/química , Solanum tuberosum/metabolismo , Digestão , Humanos , Tamanho da Partícula , Proteínas de Plantas/química , Proteínas de Plantas/metabolismo , Pós/química , Pós/metabolismo , Reologia , Solubilidade , Amido/química , Amido/metabolismo , ViscosidadeRESUMO
The objective of the study was to explore the formation mechanism and thermodynamic properties of chitosan (CS)-potato protein isolate (PPI) complex under DHPM treatment. The transmission electron microscopic (TEM) results showed the formation of a complex between CS and PPI. Meanwhile, particle size and zeta-potential were shown to increase with increasing CS concentration, further confirming the formation of the complex. The surface hydrophobicity results showed CS was bound to PPI by hydrogen bond. The ultraviolet and fluorescence spectral analysis exhibited CS formed a protective mechanism against PPI destruction, preventing the exposure of tyrosine and tryptophan residues. Infrared spectrum and circular dichroism spectral analysis revealed no occurrence of chemical reaction between CS and PPI under DHPM treatment, further indicating that they are bound by hydrogen bond and hydrophobic interaction. Moreover, CS addition was shown to enhance the intermolecular interaction and promote the formation of intermolecular hydrogen bond network. Differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA) revealed that CS addition could improve the thermal stability of PPI. These results have shed light on the formation mechanism and thermodynamic properties of the CS/PPI complex and facilitate its application in food industry.
Assuntos
Quitosana/química , Dispositivos Lab-On-A-Chip , Proteínas de Plantas/química , Pressão , Solanum tuberosum/química , Indústria Alimentícia , Interações Hidrofóbicas e Hidrofílicas , Tamanho da Partícula , Propriedades de Superfície , TermodinâmicaRESUMO
The present study was aimed at investigating the effect of ionic and non-ionic emulsifiers at 3 different levels of 0.15, 0.30 and 0.45% per 100 g of flour on the physico-chemical properties, microstructure and water distribution of fish-meat based fried snacks. The results showed that the addition of distilled mono-glycerides (DMG) decreased the strength of the starch-protein network which resulted in increased expansion and decreased water holding capacity (WHC). The addition of diacetyl tartaric acid esters of mono-glycerides (DATEM) increased the WHC and the ordered structure between starch and proteins while oil uptake was decreased. Pasting properties such as breakdown, peak viscosity and pasting temperatures were increased with the addition of DATEM compared to DMG and the control indicating the strong interaction among DATEM, starch and proteins. Scanning electron microscopy (SEM) analysis showed that DATEM strengthened the starch-protein matrix and the dense and rigid microstructure with fewer voids while DMG increased the intercellular spaces between the molecules of starch and proteins. Low field nuclear magnetic resonance (LF-NMR) relaxometry analysis revealed that the amount of free water (T21) was decreased and that of bound water (T23) was increased in DATEM samples indicating the strong interaction between emulsifiers and macromolecules compared to the control and DMG. Moreover, protein in vitro digestibility was also increased with the addition of DATEM. The findings suggested that 0.30% DATEM can be used in snacks with improved physico-chemical and functional properties.
Assuntos
Fenômenos Químicos , Emulsificantes/química , Interações Hidrofóbicas e Hidrofílicas , Alimentos Marinhos , Lanches , Água/química , Animais , Farinha/análise , Manipulação de Alimentos , Amido , Tartaratos , Temperatura , ViscosidadeRESUMO
Enhancing the performance of starch-based wood adhesive is vitally important for its practical applications. Accordingly, we designed the use of micronized starch (MS) to prepare micronized starch-based wood adhesive (MSWA) by incorporating 0, 2, 4 and 6% (w/w, dry basis starch) sodium dodecyl sulfate (SDS). The results showed that 2% SDS exhibited remarkable improvement in shear strength and viscosity of MSWA. The grafted reaction was demonstrated by 1H NMR and the steady shear results indicated that the adhesive possessed a pseudoplastic behavior under yield stress conditions. Besides, dynamic rheological measurements were applied to evaluate the structure of MSWA under varying frequencies, temperatures and constant stain. The transmission electron microscopy (TEM), Zeta potential and surface tension indicated that SDS could improve the surficial properties. Meanwhile, the microstructure of adhesive films and fracture surfaces of glued wood veneers by scanning electron microscopy (SEM) demonstrated that the migration of SDS led to the formation of surfactant layer. Furthermore, element analysis revealed the distribution of S/N in latex slices. The results of this study provide the detailed information about the influence of SDS on the rheological properties and microstructures of MSWA, which may facilitate the preparation of high performance bio-based adhesive for wood applications.
Assuntos
Adesivos/química , Reologia , Dodecilsulfato de Sódio/química , Amido/química , Madeira/química , Módulo de Elasticidade , Elementos Químicos , Látex/química , Tamanho da Partícula , Espectroscopia de Prótons por Ressonância Magnética , Resistência ao Cisalhamento , Amido/ultraestrutura , Propriedades de Superfície , Madeira/ultraestrutura , Difração de Raios XRESUMO
Graft copolymerization is a challenging step in preparation of starch-based adhesive due to the complexity and instantaneity. A combination of both experimental and simulation methodology has been employed to investigate the process at microscopic level. Through a series of characterizations of adhesives and copolymers with different SDS (sodium dodecyl sulfate) contents, 2% (w/w, 2g SDS/100 g starch) SDS demonstrated outstanding balance between the starch grafted percentage and interfacial properties. The coarse-grain molecular dynamics (CGMD) was utilized to reveal the molecular distribution and migratory mechanisms during the reaction by calculating radius distribution function (RDF) and mean square displacement (MSD). Starch chains covering the monomers surface was found to exhibit longer radius of gyration (Rg). Furthermore, the interfacial models were constructed in this study, and interfacial tension between water and VAc beads was calculated to confirm the improvement in interfacial properties and the rationality of simulation with the addition of SDS.
RESUMO
BACKGROUND: Red fish meat (a by-product of fillet processing from grass carp) is a rich source of good-quality protein, which makes it an important candidate for the production of functional foods. In this study, wheat flour was replaced with red fish meat (RFM) leftover from grass carp fillet frames at different levels (100-300 g kg-1 ) in fried snacks on a laboratory scale. The quality characteristics, physicochemical properties and sensory acceptability of the fried snacks were assessed. RESULTS: The addition of RFM significantly (P < 0.05) increased protein, fat, moisture and ash contents, while texture (breakage force) was improved. Expansion and water hydration capacity were decreased with increasing content of RFM. Lightness (L*) was increased whereas redness (a*) and yellowness (b*) were decreased with the addition of RFM. Scanning electron microscopy showed that the protein matrix was increased and fewer starch granules were found when RFM was added. Moreover, in vitro protein digestibility was also increased in samples prepared with RFM compared with the control. Furthermore, essential amino acids (lysine, leucine, threonine and methionine) increased (1.2-fold compared with the control) with increasing RFM content. CONCLUSION: The results suggested that red fish meat can be used to make a new snack product with improved nutritional value and textural properties. © 2019 Society of Chemical Industry.
Assuntos
Carne/análise , Lanches , Animais , Carpas , Cor , Culinária , Farinha/análise , Manipulação de Alimentos , Humanos , Valor Nutritivo , Paladar , Triticum/química , Resíduos/análiseRESUMO
Poly(lactide)-starch matrix, blended with multi-functionalized graphene oxide, was synthesized by solution casting in this study. To improve its interface compatibility, the graphene oxide (GO) was grafted with maleic anhydride and subsequently modified by dodecyl amine. The chemical structure and morphology of functionalized GO (f-GO) were determined by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The crystallization property, surface wettability, morphology, thermal stability, and dynamic mechanical and aging resistance properties of the nanocomposite were determined. By XRD and morphological analysis, we observed the formation of well-dispersed nanocomposites. Thermo-gravimetric analysis revealed significant improvements in thermal stability. The isothermal and non-isothermal crystallization behavior of the PLA-starch-f-GO nanocomposites demonstrated that the f-GO that was added accelerated the heterogeneous nucleation of the nanocomposites. The surface hydrophobicity, UV-shielding capacity, and aging resistance properties of these nanocomposites were enhanced by the incorporation of the f-GO. The migration rate of plasticizer of the nanocomposites decreased compared with the group without f-GO. The storage modulus for these nanocomposites improved by dynamic mechanical analysis. These insights provide a strategy for constructing high-performance nanohybrids and broadening their application in the food packaging and pharmaceutical industries.
Assuntos
Grafite/química , Nanocompostos/química , Poliésteres/química , Amido/química , Temperatura , Cristalização , Estabilidade de Medicamentos , Anidridos Maleicos/química , Plastificantes/química , Fatores de TempoRESUMO
The nano-TiO2 was utilized to improve the bonding performance, structure stability and film-forming properties of renewable starch-based wood adhesive. The results showed that 4% nano-TiO2 (nano-TiO2:starch, w;w) resulted in 6.5 MPa of shear strength and 6437 Pa.s of viscosity. The thermal stability was measured by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Additionally, low-field nuclear magnetic resonance (NMR) and rheological results exhibited the enhancement of nano-TiO2 on the pseudoplasticity and structure which determined the state and migration of water. Besides, the structural characterization of copolymer was analyzed via fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis (XRD). Furthermore, the film-forming property was evaluated by small angle X-ray scattering (SAXS) and dynamic mechanical analysis (DMA). The morphological structures of adhesive were observed by scanning electron microscopy (SEM). In conclusion, the 4% nano-TiO2 (nano-TiO2:starch, w;w) can be employed to prepare starch-based wood adhesives with superior properties for wood application.
RESUMO
Enhancing the performance of wood adhesive is important for its industrial applications. Accordingly, we designed and demonstrated the use of two co-monomers vinyl acetate (VAc) and butyl acrylate (BA) for promoting the graft copolymerization while improving the bonding performance of wood adhesive. The results showed that the addition of co-monomers in the ratio of VAc/BA 6:4 (v/v, volume basis of VAc) could improve the shear strength to 6.68MPa and 3.32MPa in dry and wet states, respectively. 1H-nuclear magnetic resonance (1H NMR) and fourier transform infrared spectroscopy (FT-IR) analysis revealed successful graft copolymerization reaction while the morphologies were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Furthermore, the grafting reaction and thermal stabilities of wood adhesive were analyzed by X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). The results showed that the properties of wood adhesive could improve dramatically by using two co-monomers VAc and BA during the graft copolymerization reaction.