Continuous-wave terahertz quantum cascade microlaser arrays operating on various bound states in the continuum.

We report on the continuous-wave (CW) operation of 1D terahertz quantum cascade (THz QC) microlaser arrays working on various bound states in the continuum (BICs). We first created a quasi-BIC state by breaking the inversion symmetry of the microlaser array, which enables flexible control of the radiation efficiency. The optimized multi-periods array exhibits single-mode emission with the maximum output power of 21 mW (at 30 K), and the maximum operation temperature (Tcw) of 45 K. To further increase Tcw, we created a hybrid-BIC state by hybridizing a quasi-BIC generated in a few-periods array and a high-Q surface plasmon polariton mode formed in an unbiased array. The hybridization minimizes the pumping area with no obvious degradation of the threshold current density. The reduced pumping area, together with the discrete distribution of microlasers, significantly decreases the device thermal resistance. Such scheme improves the Tcw up to 79 K with a low beam divergence of 17°×17°, and the output power remains 3.4 mW at 20 K. Our work provides a novel solution to control the output power, the operating temperature, and the beam quality of THz QC lasers in CW mode.

H2S quartz-enhanced photoacoustic spectroscopy sensor employing a liquid-nitrogen-cooled THz quantum cascade laser operating in pulsed mode.

In this work, we report on a quartz-enhanced photoacoustic spectroscopy (QEPAS) sensor for hydrogen sulfide (H2S) detection, exploiting a liquid-nitrogen-cooled THz quantum cascade laser (QCL) operating in pulsed mode. The spectrophone was designed to accommodate a THz QCL beam and consisted of a custom quartz tuning fork with a large prong spacing, coupled with acoustic resonator tubes. The targeted rotational transition falls at 2.87 THz (95.626 cm-1), with a line-strength of 5.53 ∙ 10-20 cm/mol. A THz QCL peak power of 150 mW was measured at a heat sink temperature of 81 K, pulse width of 1 µs and repetition rate of 15.8 kHz. A QEPAS record sensitivity for H2S detection in the THz range of 360 part-per-billion in volume was achieved at a gas pressure of 60 Torr and 10 s integration time.

Modeling and improving the output power of terahertz master-oscillator power-amplifier quantum cascade lasers.

A model based on carrier rate equations is proposed to evaluate the gain saturation and predict the dependence of the output power of a terahertz master-oscillator power-amplifier quantum cascade laser (THz-MOPA-QCL) on the material and structure parameters. The model reveals the design rules of the preamplifier and the power extractor to maximize the output power and the wall-plug efficiency. The correction of the model is verified by its agreement with the experiment results. The optimized MOPA devices exhibit single-mode emission at ∼ 2.6 THz with a side mode suppression ratio of 23 dB, a pulsed output power of 153 mW, a wall-plug efficiency of 0.22%, and a low divergence angle of ∼6°×16°, all measured at an operation temperature of 77 K. The model developed here is helpful for the design of MOPA devices and semiconductor optical amplifiers, in which the active region is based on intersubband transitions.

Terahertz master-oscillator power-amplifier quantum cascade laser with a grating coupler of extremely low reflectivity.

A terahertz master-oscillation power-amplifier quantum cascade laser (THz-MOPA-QCL) is demonstrated where a grating coupler is employed to efficiently extract the THz radiation. By maximizing the group velocity and eliminating the scattering of THz wave in the grating coupler, the residue reflectivity is reduced down to the order of 10-3. A buried DFB grating and a tapered preamplifier are proposed to improve the seed power and to reduce the gain saturation, respectively. The THz-MOPA-QCL exhibits single-mode emission, a single-lobed beam with a narrow divergence angle of 18° × 16°, and a pulsed output power of 136 mW at 20 K, which is 36 times that of a second-order DFB laser from the same material.

Sideband generation of coupled-cavity terahertz semiconductor lasers under active radio frequency modulation.

The radio frequency (RF) modulation is a powerful tool, which is used for generating sidebands in semiconductor lasers for active mode-locking. The two-section coupled-cavity laser geometry shows advantages over traditional Fabry-Pérot cavities in the RF modulation efficiency, because of its reduced device capacitance of short section cavity. Further, it has been widely used for active/passive mode-locking of semiconductor diode lasers. For semiconductor-based quantum cascade lasers (QCLs) emitting in the far-infrared or terahertz frequency bands, the two-section coupled-cavity configuration can strongly prevent the laser from multimode emissions. This is because of its strong mode selection (loss modulation), which the cavity geometry introduces. Here, we experimentally demonstrate that the coupled-cavity terahertz QCL can be actively modulated to generate sidebands. The RF modulation is efficient at the frequency that equals the difference frequency between the fundamental and higher order transverse modes of the laser, and its harmonics. We show for the first time that, when the laser is modulated at the second harmonic of the difference frequency, the sideband generation in coupled-cavity terahertz QCLs and the generated sidebands are equally spaced by the injected microwave frequency. Our results, which are presented here, provide a novel approach for modulating terahertz coupled-cavity lasers for active mode-locking. The coupled-cavity geometry shows advantages in generating dense modes with short cavities for potential high-resolution spectroscopy. Furthermore, the short coupled-cavity laser consumes less electrical power than Fabry-Pérot lasers that generate a similar mode spacing.

Phase-locked arrays of surface-emitting graded-photonic-heterostructure terahertz semiconductor lasers.

We have demonstrated that a hybrid laser array, combining graded-photonic-heterostructure terahertz semiconductor lasers with a ring resonator, allows the relative phase (either symmetric or anti-symmetric) between the sources to be fixed by design. We have successfully phase-locked up to five separate lasers. Compared with a single device, we achieved a clear narrowing of the output beam profile.

Demonstration of a fully integrated superconducting receiver with a 2.7 THz quantum cascade laser.

We demonstrate for the first time the integration of a superconducting hot electron bolometer (HEB) mixer and a quantum cascade laser (QCL) on the same 4-K stage of a single cryostat, which is of particular interest for terahertz (THz) HEB/QCL integrated heterodyne receivers for practical applications. Two key issues are addressed. Firstly, a low power consumption QCL is adopted for preventing its heat dissipation from destroying the HEB's superconductivity. Secondly, a simple spherical lens located on the same 4-K stage is introduced to optimize the coupling between the HEB and the QCL, which has relatively limited output power owing to low input direct current (DC) power. Note that simulation techniques are used to design the HEB/QCL integrated heterodyne receiver to avoid the need for mechanical tuning. The integrated HEB/QCL receiver shows an uncorrected noise temperature of 1500 K at 2.7 THz, which is better than the performance of the same receiver with all the components not integrated.

Molecular cloning, sequence analysis and tissue-specific expression of Akirin2 gene in Tianfu goat.

The Akirin2 gene is a nuclear factor and is considered as a potential functional candidate gene for meat quality. To better understand the structures and functions of Akirin2 gene, the cDNA of the Tianfu goat Akirin2 gene was cloned. Sequence analysis showed that the Tianfu goat Akirin2 cDNA full coding sequence (CDS) contains 579bp nucleotides that encode 192 amino acids. A phylogenic tree of the Akirin2 protein sequence from the Tianfu goat and other species revealed that the Tianfu goat Akirin2 was closely related with cattle and sheep Akirin2. RT-qPCR analysis showed that Akirin2 was expressed in the myocardium, liver, spleen, lung, kidney, leg muscle, abdominal muscle and the longissimus dorsi muscle. Especially, high expression levels of Akirin2 were detected in the spleen, lung, and kidney whereas lower expression levels were seen in the liver, myocardium, leg muscle, abdominal muscle and longissimus dorsi muscle. Temporal mRNA expression showed that Akirin2 expression levels in the longissimus dorsi muscle, first increased then decreased from day 1 to month 12. Western blotting results showed that the Akirin2 protein was only detected in the lung and three skeletal muscle tissues.

Molecular cloning, structural analysis and tissue expression of protein phosphatase 3 catalytic subunit alpha isoform (PPP3CA) gene in Tianfu goat muscle.

Calcineurin, a Ca(2+)/calmodulin-dependent protein phosphatase, plays a critical role in controlling skeletal muscle fiber type. However, little information is available concerning the expression of calcineurin in goat. Therefore, protein phosphatase 3 catalytic subunit alpha isoform (PPP3CA) gene, also called calcineurin Aα, was cloned and its expression characterized in Tianfu goat muscle. Real time quantitative polymerase chain reaction (RT-qPCR) analyses revealed that Tianfu goat PPP3CA was detected in cardiac muscle, biceps femoris muscle, abdominal muscle, longissimus dors muscle, and soleus muscle. High expression levels were found in biceps femoris muscle, longissimus muscle and abdominal muscle (p < 0.01), and low expression levels were seen in cardiac muscle and soleus muscle (p > 0.05). In addition, the spatial-temporal mRNA expression levels showed different variation trends in different muscles with the age of the goats. Western blotting further revealed that PPP3CA protein was expressed in the above-mentioned tissues, with the highest level in biceps femoris muscle, and the lowest level in soleus muscle. In this study, we isolated the full-length coding sequence of Tianfu goat PPP3CA gene, analyzed its structure, and investigated its expression in different muscle tissues from different age stages. These results provide a foundation for understanding the function of the PPP3CA gene in goats.

Molecular cloning and characterization of different expression of MYOZ2 and MYOZ3 in Tianfu goat.

The myozenin family of proteins binds calcineurin, which is involved in myocyte differentiation of skeletal muscle. Moreover, gene expression of myozenin is closely related to meat quality. To further understand the functions and effects of myozenin2 (MYOZ2) and myozenin3 (MYOZ3) genes in goat, we cloned them from Tianfu goat longissimus dorsi muscle. Sequence analyses revealed that full-length coding sequence of MYOZ2 consisted of 795 bp and encoded 264 amino acids, and full-length coding sequence of MYOZ3 consisted of 735 bp and encoded 244 amino acids. RT-qPCR analyses revealed that mRNA expressions of MYOZ2 and MYOZ3 were detected in heart, liver, spleen, lung, kidney, leg muscle, abdominal muscle, and longissimus dorsi muscle. Particularly high expression levels of MYOZ2 were seen in abdominal muscle and heart (P<0.01), low expression levels were seen in leg muscle (P<0.01), longissimus dorsi muscle (P>0.05) and very little expression were detected in liver, spleen, lung and kidney (P>0.05). In addition, high expression levels of MYOZ3 were seen in abdominal muscle, leg muscle, lungs and kidney (P<0.01), low expression levels were found in longissimus dorsi muscle and spleen (P<0.01) and very little expression were detected in heart and liver (P>0.05). Temporal mRNA expression results showed that MYOZ2 and MYOZ3 gene expression varied across four muscle tissues with different ages of the goats. Western blotting further revealed that MYOZ2 and MYOZ3 proteins were only expressed in goat muscle, with notable temporal expression differences in specialized muscle tissues from five development age stages. This work provides the first evidence that MYOZ2 and MYOZ3 genes are expressed abundantly in Tianfu goat muscle tissues from different development age stages, and lay a foundation for understanding the functions of MYOZ2 and MYOZ3 genes in muscle fiber differentiation.

Molecular cloning, sequence identification and expression analysis of novel caprine MYLPF gene.

Skeletal muscle genes are important potentially functional candidate genes for livestock production and meat quality. Myosin regulatory light chain (MLC) regulates myofilament activation via phosphorylation by Ca(2+) dependent myosin light chain kinase. The cDNA of the myosin light chain, phosphorylatable, fast skeletal muscle (MYLPF) gene from the longissimus dorsi of Tianfu goat was cloned and sequenced. The results showed that MYLPF full-length coding sequence consists of 513 bp and encodes 170 amino acids with a molecular mass of 19.0 kD. Two EF-hand superfamily domain of MYLPF gene conserved between caprine and other animals. The deduced amino acid sequence of MYLPF shared significant identity with the MYLPF from other mammals. A phylogenetic tree analysis revealed that the caprine MYLPF protein has a close genetic relationship and evolutional distance with MYLPF in other mammals. Analysis by RT-PCR showed that the MYLPF mRNA was detected in heart, liver, spleen, lung, kidney, gastrocnemius, abdominal muscle and longissimus dorsi. In particular, high expression levels of MYLPF mRNA were detected in the longissimus dorsi, gastrocnemius and abdominal muscle, and low level of expressions were observed in liver, spleen, lung and kidney. In addition, the temporal expression analysis further showed MYLPF expression decreased gradually with age in the skeletal muscle. This may be important as muscle growth occurs mainly in young age in goats. Western blotting results detected the MYLPF protein in four of the tissues in which MYLPF was shown to be expressed; the four exceptions were liver, spleen, lung and kidney.

Molecular cloning and tissue distribution of the phosphotyrosine interaction domain containing 1 (PID1) gene in Tianfu goat.

Phosphotyrosine interaction domain containing 1 (PID1) is an important mediator in the development of obesity-related insulin resistance in humans and animals. For a better understanding of the structure and function of the PID1 gene and to study its effect in caprine, the cDNA of the PID1 gene from the abdominal muscle of Tianfu goat was cloned and sequenced. The structure of PID1 was analyzed using bioinformatics tools. The results showed that the full sequence of the caprine PID1 cDNA was 896 bp long and contained a 654 bp long coding region that encoded a 217 amino acid sequence. Fifteen phosphorylation sites were predicted in the translated PID1 protein. The protein had a phosphotyrosine-binding domain between Arg(53) and Ile(199). A phylogenic tree based on the PID1 proteins from other species revealed that the caprine protein was closely related to cattle PID1. Fluorescence quantitative PCR analyses revealed that PID1 was expressed in the heart, liver, spleen, lung, kidney, leg muscle, abdominal muscle and longissimus dorsi muscle of goats. In particular, high expression levels of PID1 were detected in liver and abdominal muscle, and low expression levels were seen in lung. Furthermore, the PID1 mRNA expression levels in the longissimus dorsi muscles increased gradually with the age of the goats (P<0.05). Western blotting results detected the PID1 protein in six of the tissues in which PID1 was shown to be expressed; the two exceptions were liver and spleen.

Efficient power extraction in surface-emitting semiconductor lasers using graded photonic heterostructures.

Symmetric and antisymmetric band-edge modes exist in distributed feedback surface-emitting semiconductor lasers, with the dominant difference being the radiation loss. Devices generally operate on the low-loss antisymmetric modes, although the power extraction efficiency is low. Here we develop graded photonic heterostructures, which localize the symmetric mode in the device centre and confine the antisymmetric modes close to the laser facet. This modal spatial separation is combined with absorbing boundaries to increase the antisymmetric mode loss, and force device operation on the symmetric mode, with elevated radiation efficiency. Application of this concept to terahertz quantum cascade lasers leads to record-high peak-power surface emission (>100 mW) and differential efficiencies (230 mW A(-1)), together with low-divergence, single-lobed emission patterns, and is also applicable to continuous-wave operation. Such flexible tuning of the radiation loss using graded photonic heterostructures, with only a minimal influence on threshold current, is highly desirable for optimizing second-order distributed feedback lasers.

[Cloning and tissue expression of CAST transcript â ¡ in goat].

Calpastatin (CAST) gene is closely related with meat quality in livestock and poultry. Based on the bovine and ovine mRNA sequences, the cDNA of CAST Ⅱ gene in goat was amplified successfully for the first time by using RACE-PCR. Results showed that CAST Ⅱ of goat was 2474 bp in length with an open reading frame (ORF) 1695 bp long and encoded 564 amino acids, and there were four conserved domains and one conserved seven-peptide domain in amino acids sequences. Bioinformation analysis indicated that its secondary structures mainly were random coil and helical regions, and contained rich hydrophobic regions, certain phosphorylation sites, and protein kinase C (PKC) sites. Meanwhile, analysis of tissue expression of the gene in Tianfu meat goat demonstrated it was expressed in seven selected tissues. When the goat was of 6-month age, the highest expression was observed in longissimusdorsi, which was significantly higher than that of crureus (P<0.05) and other internal organ tissues (P<0.01).Furthermore, the expression of CAST II increased with the rise of the age and became the highest when the goat was at three-year age.

Surface-emitting mid-infrared quantum cascade lasers with high-contrast photonic crystal resonators.

We have developed surface-emitting single-mode quantum cascade lasers which employ high-contrast photonic-crystal resonators. The devices operate on band-edge states of the photonic band-structure. The mode profile and polarization characteristics of the band-edge modes are calculated by three-dimensional finite-difference time-domain simulation. Experimentally, the spectral properties, the far-field patterns, and the polarization characteristics of the lasers are determined and compared with simulations. The good agreement between the simulations and the experiments confirms that the hexapolar mode at the Gamma-point band-edge gives rise to lasing. By using a novel and advanced fabrication method, deep and vertical PhC holes are fabricated with no metal redeposition on the sidewalls, which improves the laser performance with respect to the current status. The angular of the output beam is approximately 15 masculine, and the side mode suppression ratio of the single mode emission is about 25 dB. The threshold current density at 78 K and the maximum operation temperature are 7.6 kA/cm2 and 220 K, respectively. The performance is mainly limited by the loss induced by surface plasmon waveguide, which can be overcome by using an optimized dielectric waveguide structure.

Polarized single-lobed surface emission in mid-infrared, photonic-crystal, quantum-cascade lasers.

We report single-mode, surface-emitting, mid-IR, photonic-crystal (PhC), quantum-cascade lasers with linearly polarized and highly directional single-lobed emission. A metallic square-lattice photonic crystal with elliptical air holes and pi phase shift was used as the resonator. The 2D feedback coupling--necessary for the operation of the photonic-crystal resonator--is induced by the mismatch between the modes supported by metalized and nonmetalized regions and yields single-mode output with a side-mode suppression ratio >30 dB. The elliptical air holes modify the relative intensities of the TM field components (H(x) and H(y)) in the PhC plane, thus yielding linearly polarized emission. The pi phase shift allows the system to produce a single-lobed pattern in the far field with a narrow divergence angle (2.4 degrees x 1.8 degrees). The emission is perfectly orthogonal to the device surface, and the maximum operating temperature--still limited by the metallic ohmic losses--is 240 K.