Outcomes of physical exercises on initiation, progression, and treatment of breast cancer.

The emergence of drug resistance is a substantial obstacle to the effective management of breast cancer, which is the primary cause of cancer-related deaths in women worldwide. To facilitate the development of targeted therapies that can effectively overcome drug resistance, it is crucial to possess a comprehensive comprehension of the molecular mechanisms that underpin resistance to breast cancer treatment. So far, considerable progress has been made in the field of exercise-oncology research and overcome drug resistance, specifically about breast cancer. Evidence has suggested that participation in physical activity is correlated with a decrease in reappearance and fatality rates of breast cancer patients. It has been reported that participation in physical activity can yield favorable outcomes in the prevention, treatment, and post-treatment of breast cancer. An increasing body of empirical evidence suggests that participation in physical activity can alter diverse biological mechanisms, potentially augmenting breast cancer treatments' efficacy. Comparing increased physical activity versus reduced physical activity in breast cancer patients who received chemotherapy, radiotherapy, and surgery supported the significance of exercise in comprehensive care strategies to enhance overall health and treatment efficacy. Furthermore, previous studies have reported that physical activity can enhance the efficacy of breast cancer treatments. This review provides the current literature regarding the influence of physical activity on the occurrence and progression of breast cancer.

Decoding the Reactivity Enhancement of Ln2Ce2O7 Compounds (Ln = Yb, Y, Tb, and Gd) for Soot Combustion: The Remarkable Contribution of Variable Valence A-Sites.

The impact of variable valence A-sites on the redox property and reactivity of Ln2Ce2O7 compounds in soot particulate combustion has been investigated. It was observed that Yb2Ce2O7, Y2Ce2O7, and Gd2Ce2O7 formed a rare earth C-type phase, while Tb2Ce2O7 formed a solid solution phase. Both Tb2Ce2O7 and Yb2Ce2O7 possess dual valence state A-sites, resulting in significantly more surface vacancies. Additionally, the advantageous solid solution phase structure of Tb2Ce2O7 leads to even more surface vacancies than Yb2Ce2O7, which is crucial to generate active oxygen sites. Moreover, the introduction of NO into the reaction feed enhances combustion activity by producing active surface monodentate nitrates. A catalyst with higher numbers of surface vacancies exhibits improved NO oxidation ability and better NO2 utilization efficiency. Consequently, the Tb2Ce2O7 compound demonstrates not only the best soot combustion activity, but also an optimal NOx-assistance effect. Therefore, it is concluded that variable valence A-site is the intrinsic factor to improve the reactivity of Ln2Ce2O7 catalysts.

Comparing BaZrO3 Perovskite and La2Zr2O7 Pyrochlore for Oxidative Coupling of Methane (OCM): The Importance of Basic Sites vs Oxygen Vacancies.

La2Zr2O7 pyrochlore with intrinsic oxygen vacancies and BaZrO3 perovskite without intrinsic oxygen vacancies were synthesized for the OCM reaction. It has been revealed that the OCM performance and surface selective oxygen species of BaZrO3 are higher than that of La2Zr2O7 under the reaction condition. This is because BaZrO3 possesses more basic sites than La2Zr2O7, and thus it can stabilize the OCM reactive oxygen species better at elevated temperature. In the structure, the A-O bond lattice oxygen of the two compounds mainly provides basic sites, but the B-O bond lattice oxygen mainly promotes deep oxidation of methane and the generated hydrocarbons. The types of the OCM reactive oxygen species are prone to be associated with the properties of the A-site metal oxides.

Construction of chitosan-gelatin polysaccharide-protein composite hydrogel via mechanical stretching and its biocompatibility in vivo.

Natural polysaccharides and protein macromolecules are the important components of extracellular matrix (ECM), but individual component generally exhibits weak mechanical property, limited biological function or strong immunogenicity in tissue engineering. Herein, gelatin (Gel) was deposited to the stretched (65 %) chitosan (CS) hydrogel substrates to fabricate the polysaccharide-protein CS-Gel-65 % composite hydrogels to mimic the natural component of ECM and improve the above deficiencies. CS hydrogel substrates under different stretching deformations exhibited tunable morphology, chemical property and wettability, having a vital influence on the secondary structures of deposited fibrous Gel protein, namely appearing with the decreased ß-sheet content in stretched CS hydrogel. Gel also produced a more homogenous distribution on the stretched CS hydrogel substrate due to the unfolding of Gel and increased interactions between Gel and CS than on the unstretched substrate. Moreover, the polysaccharide-protein composite hydrogel possessed enhanced mechanical property and oriented structure via stretching-drying method. Besides, in vivo subcutaneous implantation indicated that the CS-Gel-65 % composite hydrogel showed lower immunogenicity, thinner fibrous capsule, better angiogenesis effect and increased M2/M1 of macrophage phenotype. Polysaccharide-protein CS-Gel-65 % composite hydrogel offers a novel material as a tissue engineering scaffold, which could promote angiogenesis and build a good immune microenvironment for the damaged tissue repair.

Doping SnO2 with metal ions of varying valence states: discerning the importance of active surface oxygen species vs. acid sites for C3H8 and CO oxidation.

To elucidate the valence state effect of doping cations, Li+, Mg2+, Cr3+, Zr4+ and Nb5+ with radii similar to Sn4+ (CN = 6) were chosen to dope tetragonal SnO2. Cr3+, Zr4+ and Nb5+ can enter the SnO2 lattice to produce solid solutions, thus creating more surface defects. However, Li+ and Mg2+ can only stay on the SnO2 surface as nitrates, thus suppressing the surface defects. The rich surface defects facilitate the generation of active O2-/Oδ- and acid sites on the solid solution catalysts, hence improving the reactivity. On the solid solution catalysts active for propane combustion, several reactive intermediates can be formed, but are negligible on those with low activity. It is confirmed that for propane combustion, surface acid sites play a more vital role than active oxygen sites. Nevertheless, for CO oxidation, the active oxygen sites play a more vital role than the acid sites.

The controlled engineering of surface oxygen defects on Bi2Zr2O7 compounds for catalytic soot combustion by adjusting the preparation methods.

The quantity of surface oxygen vacancies/defects is critical to promote the reactivity of metal oxide catalysts. Therefore, for the controlled engineering of Bi2Zr2O7 with rich surface defects for soot combustion, four different methods have been adopted. Bi2Zr2O7 compounds with a defective fluorite phase but with varied surface vacancy concentrations have been successfully synthesized by various methods. The best catalyst (Bi2Zr2O7-CP) was fabricated by a facile co-precipitation method. Both O2- and O22- were the active surface sites whose number positively correlated to the number of surface oxygen vacancies and determined the activity. Moreover, a sample with more surface vacancies usually had weaker Zr-O bonds, which could be the intrinsic factor to enhance the activity. In addition, a novel and simple method has been developed to accurately titrate the absolute amount of soot reactive oxygen sites and calculate the TOF values. In conclusion, by optimizing the preparation methods, Bi2Zr2O7 catalysts with rich surface defects can be tuned, which may help in designing more applicable soot oxidation catalysts.

Ionic Liquids Modulating Local Microenvironment of Ni-Fe Binary Single Atom Catalyst for Efficient Electrochemical CO2 Reduction.

The Ni and Fe dual-atom catalysts still undergo strikingly attenuation under high current density and high overpotential. To ameliorate the issue, the ionic liquids with different cations or anions are used in this work to regulate the micro-surface of nitrogen-doped carbon supported Ni and Fe dual-atom sites catalyst (NiFe-N-C) by an impregnation method. The experimental data reveals the dual function of ionic liquids, which enhances CO2 adsorption ability and modulates electronic structure, facilitating CO2 anion radical (CO2 • ¯) stabilization and decreasing onset potential. The theoretical calculation results prove that the attachment of ionic liquids modulates electronic structure, reduces energy barrier of CO2 • ¯ formation, and enhances overall ECR performance. Based on these merits, BMImPF6 modified NiFe-N-C (NiFe-N-C/BMImPF6 ) achieves the high CO faradaic efficiency of 91.9% with a CO partial current density of -120 mA cm-2 at -1.0 V. When the NiFe-N-C/BMImPF6 is assembled as cathode of Zn-CO2 battery, it delivers the highest power density of 2.61 mW cm-2 at 2.57 mA cm-2 and superior cycling stability. This work will afford a direction to modify the microenvironment of other dual-atom catalysts for high-performance CO2 electroreduction.

Preparation of La2Zr2O7 composite oxides with fluorite/pyrochlore phases by excluding element influences for catalyzing oxidative coupling of methane.

To elucidate the effect of the A2B2O7 phase on the oxidative coupling of methane (OCM) while excluding elemental influences, La2Zr2O7 compounds with a disordered defect fluorite (La2Zr2O7-F) structure and an ordered pyrochlore phase (La2Zr2O7-P) have been synthesized. Irrespective of their element composition, the catalytic performance of La2Zr2O7-F exceeds that of La2Zr2O7-P. Furthermore, the La2Zr2O7-F surface has more oxygen vacancies/defects than the La2Zr2O7 surface because La2Zr2O7-F exhibits a higher lattice disorder degree and lower B-O bond strength, which leads to the formation of more reactive oxygen anions (O2- and O22-) and basic sites for OCM. Isotopic exchange results have testified that surface-active oxygen sites are generated due to the gaseous O2 adsorption/activation occurring on the surface vacancies via both simple and multiple hetero-exchange mechanisms. In conclusion, crystal structure is the primary factor that governs the catalytic performance of A2B2O7 compounds, with the disordered defect fluorite phase being the most optimal structure for OCM.

Fabrication of Ln2Zr2O7 Fluorite and LnAlO3 Perovskite (Ln = La, Nd, Sm) Compounds to Catalyze the OCM Reaction: On the Temperature-Induced Phase Transformation and Oxygen Vacancy.

Through synthesizing Ln2Zr2O7 and LnAlO3 (Ln = La, Nd, Sm) catalysts, the origin of active sites for oxidative coupling of methane (OCM) on A2B2O7 fluorite and ABO3 perovskite compounds has been compared and elucidated. Ln2Zr2O7 catalysts show much better reaction performance than the respective LnAlO3 catalysts at low temperatures (500-600 °C), but the difference will be mitigated significantly above 600 °C. The reaction performance ranks in the order of La2Zr2O7 > Nd2Zr2O7 > Sm2Zr2O7 > LaAlO3 > NdAlO3 > SmAlO3. It is revealed that the unit cell free volume (Vf) plays an important role in affecting the catalytic activity, and the Ln2Zr2O7 catalysts with a disordered defect fluorite phase have inherent oxygen vacancies, which can directly activate gas-phase O2 molecules to generate OCM reactive O2- anions. However, the oxygen vacancies of LnAlO3 with a perovskite structure can only be generated by lattice distortion/transformation above 600 °C. Moreover, Ln2Zr2O7 fluorites have weaker B-O bonds than LnAlO3 perovskites, thus making it easier to generate surface vacancies as well as active O2- sites. The surface alkalinity is intimately relevant to the active oxygen species, which act together to decide the OCM performance on both types of catalysts. Indeed, this explains that LnAlO3 catalysts show much worse performance than Ln2Zr2O7 catalysts below 600 °C, which will be evidently improved at elevated temperatures due to phase transformation.

Increased production and anti-senescence activity of exopolysaccharides in Ganoderma lingzhi by co-overexpression of ß-1,3-glucan synthase and UDP-glucose pyrophosphorylase.

A ß-1,3-glucan synthase gene (gls) was cloned and overexpressed in Ganoderma lingzhi. The content of intracellular polysaccharides (IPS) in G. lingzhi overexpressing gls was 22.36 mg/100 mg dry weight (DW), 19 % higher than those in the wild-type (WT) strain. Overexpression of gls did not affect the expression of the phosphoglucomutase gene and the UDP-glucose pyrophosphorylase gene (ugp) in the polysaccharide biosynthesis. The gls and ugp were then simultaneously overexpressed in G. lingzhi for the first time. The combined overexpression of these two genes increased the IPS content and exopolysaccharides (EPS) production to a greater extent than the overexpression of gls independently. The maximum IPS content of the overexpressed strain was 24.61 mg/100 mg, and the maximum EPS production was 1.55 g/L, 1.31- and 1.50-fold higher than that in the WT strain, respectively. Moreover, the major EPS fractions from the overexpression strain contained more glucose (86.7 % and 72.5 %) than those from the WT strain (78.2 % and 62.9 %). Furthermore, the major fraction G+U-0.1 from the overexpression strain exhibited stronger antioxidant and anti-senescence activities than the WT-0.1 fraction from the WT strain. These findings will aid in the hyperproduction and application of Ganoderma polysaccharides and facilitate our understanding of mushroom polysaccharide biosynthesis.

Spatially Varying Prior Learning for Blind Hyperspectral Image Fusion.

In recent years, researchers have become more interested in hyperspectral image fusion (HIF) as a potential alternative to expensive high-resolution hyperspectral imaging systems, which aims to recover a high-resolution hyperspectral image (HR-HSI) from two images obtained from low-resolution hyperspectral (LR-HSI) and high-spatial-resolution multispectral (HR-MSI). It is generally assumed that degeneration in both the spatial and spectral domains is known in traditional model-based methods or that there existed paired HR-LR training data in deep learning-based methods. However, such an assumption is often invalid in practice. Furthermore, most existing works, either introducing hand-crafted priors or treating HIF as a black-box problem, cannot take full advantage of the physical model. To address those issues, we propose a deep blind HIF method by unfolding model-based maximum a posterior (MAP) estimation into a network implementation in this paper. Our method works with a Laplace distribution (LD) prior that does not need paired training data. Moreover, we have developed an observation module to directly learn degeneration in the spatial domain from LR-HSI data, addressing the challenge of spatially-varying degradation. We also propose to learn the uncertainty (mean and variance) of LD models using a novel Swin-Transformer-based denoiser and to estimate the variance of degraded images from residual errors (rather than treating them as global scalars). All parameters of the MAP estimation algorithm and the observation module can be jointly optimized through end-to-end training. Extensive experiments on both synthetic and real datasets show that the proposed method outperforms existing competing methods in terms of both objective evaluation indexes and visual qualities.

Photonic reservoir computing with a silica microsphere cavity.

We experimentally demonstrate a photonic reservoir computing (RC) system using a passive silica microsphere cavity. The microsphere cavity exhibits a consistent nonlinear response to the non-return-to-zero signal and the multiple-level signal due to strong interference between numerous whispering gallery modes in the "over-coupling" state. Benefiting from the fact that the long photon lifetime inside the microsphere cavity provides a memory of past inputs, this photonic reservoir does not require a delayed feedback loop. We evaluate the generalization property of the RC system and obtain a correlation coefficient of 0.923. In addition, we obtain a NMSE of 0.06 for the Santa-Fe chaotic time series prediction task and a SER of 0.02 at a SNR of 12 dB for the nonlinear channel equalization task. Moreover, a microsphere cavity with a higher quality factor can provide a larger memory capacity. The application of the silica microsphere cavity as a small-volume passive device in a reservoir furnishes a new avenue for achieving a low-consumption and integrated RC system.

A homozygous frameshift variant in SYCP2 caused meiotic arrest and non-obstructive azoospermia.

Genetic causation for the majority of non-obstructive azoospermia (NOA) remains unclear. Mutations in synaptonemal complex (SC)-associated genes could cause meiotic arrest and NOA. Previous studies showed that heterozygous truncating variants in SYCP2 encoding a protein essential for SC formation, are associated with non-obstructive azoospermia and severe oligozoospermia. Herein, we showed a homozygous loss-of-function variant in SYCP2 (c.2689_2690insT) in an NOA-affected patient. And this variant was inherited from heterozygous parental carriers by natural reproduction. HE, IF, and meiotic chromosomal spread analyses demonstrated that spermatogenesis was arrested at the zygotene stage in the proband with NOA. Thus, this study revealed that SYCP2 associated with NOA segregates in an autosomal recessive inheritance pattern, rather than an autosomal dominant pattern. Furthermore, our study expanded the knowledge of variants in SYCP2 and provided new insight into understanding the genetic etiology of NOA.

Heptamethoxyflavone Alleviates Metabolic Syndrome in High-Fat Diet-Fed Mice by Regulating the Composition, Function, and Metabolism of Gut Microbiota.

3,5,6,7,8,3',4'-Heptamethoxyflavone (HMF) could prevent obesity and hyperlipidemia, but its effects on gut microbiota and fecal metabolites remain unclear. Here, the effect of HMF on metabolic syndrome (MS) was evaluated in high-fat diet (HFD)-fed mice, and its underlying mechanisms were revealed by integrative metagenomic and metabolomic analyses. We demonstrated that HMF could effectively ameliorate HFD-induced MS by alleviating body-weight gain, fat accumulation, hepatic steatosis, and lipid and glucose abnormalities. HMF significantly altered the gut microbiota composition in HFD-fed mice with enrichment of short-chain fatty acid (SCFA)- and bile acid-producing beneficial bacteria and inhibition of harmful bacteria. Also, HMF improved microbial functions by up-regulating bile acid metabolism and down-regulating fatty acid metabolism and inflammatory response-related pathways. Consistent with the gut microbial changes, HMF altered the fecal metabolite profile of HFD-fed mice, mainly characterized by increasing SCFA and several bile acid levels as well as lowering several lysophospholipids and fatty acid levels. Correlation analysis indicated that three key species Faecalibaculum rodentium, Collinsella aerofaciens, and Lactobacillus fermentum and the increase in microbial metabolites, i.e., SCFAs and secondary bile acids, might play a positive role in alleviating MS. Our results suggested that HMF alleviated HFD-induced MS possibly by modulating the composition, function, and metabolism of gut microbiota.

Pulse Capacitive Coupling Electric Field Regulates Cell Migration, Proliferation, Polarization, and Vascularization to Accelerate Wound Healing.

Objectives: Accelerating wound healing using continuous exogenous electrical stimulation is limited due to some serious side effects, including thermal damage. Many previous studies based on direct current contact stimulation may cause chemical burns or blisters, thereby increasing patients suffering. The aim of this study was to develop a safer and more convenient pulse capacitive coupling electrical field (PCCEF) stimulation to accelerate wound healing. Approach: A PCCEF-generating platform was self-designed to facilitate wound healing. The promoting effects and appropriate pulse width were explored by applying PCCEFs (54 mV/mm, 60 Hz) of different pulse widths to various cells involved in wound healing and mouse models for 2 h daily. Results: PCCEFs of ≥10 µs pulse width showed marked promotion of the migration and proliferation of human dermal fibroblasts and HaCaT cells, enhanced the M2-type polarization and YPA/TAZ expression of macrophages, and facilitated the wound healing of mouse models. Comprehensive histological results suggested that PCCEF of 100 µs pulse width exerted the most positive effects. Innovation: A safe and effective PCCEF was developed to promote wound healing, which prevented prolonged stimulation and averted direct contact. Conclusion: PCCEF accelerated wound healing, especially at the optimal 100 µs pulse width, and was expected to be translated to clinical application, helping alleviate patient suffering, while reducing side effects.

Development of alkaline phosphatase-scFv and its use for one-step enzyme-linked immunosorbent assay for His-tagged protein detection.

A histidine (His)-tag is composed of six His residues and typically exerts little influence on the structure and solubility of expressed recombinant fusion proteins. Purification methods for recombinant proteins containing His-tags are relatively well-established, thus His-tags are widely used in protein recombination technology. We established a one-step enzyme-linked immunosorbent assay (ELISA) for His-tagged recombinant proteins. We analyzed variable heavy and light chains of the anti-His-tag monoclonal antibody 4C9 and used BLAST analyses to determine variable zones in light (VL) and heavy chains (VH). VH, VL, and alkaline phosphatase (ALP) regions were connected via a linker sequence and ligated into the pGEX-4T-1 expression vector. Different recombinant proteins with His tags were used to evaluate and detect ALP-scFv activity. Antigen and anti-His-scFv-ALP concentrations for direct ELISA were optimized using the checkerboard method. ZIKV-NS1, CHIKV-E2, SCRV-N, and other His-tag fusion proteins demonstrated specific reactions with anti-His-scFv-ALP, which were accurate and reproducible when the antigen concentration was 50 µg mL-1 and the antibody concentration was 6.25 µg mL-1. For competitive ELISA, we observed a good linear relationship when coating concentrations of recombinant human anti-Müllerian hormone (hAMH) were between 0.78 and 12.5 µg mL-1. Our direct ELISA method is simple, rapid, and accurate. The scFv antibody can be purified using a prokaryotic expression system, which provides uniform product quality and reduces variations between batches.

Mechanical Stretch Promotes Neurite Outgrowth of Primary Cultured Dorsal Root Ganglion Neurons via Suppression of Semaphorin 3A-Neuropilin-1/Plexin-A1 Signaling.

Significant attempts have been made to promote neuronal extension and migration in nerve development and regeneration. Although mechanical stretch induces persistent elongation of the axon, the underlying molecular mechanisms are not yet clear. Some axonal guidance cues secreted in the growth cone that affect the axonal growth could attract or repel axons in neurite connection. As semaphorin 3A (Sema3A) is an important repulsion guidance molecule, inhibition of Sema3A has been postulated to promote neuronal development. In this study, the effects of mechanical stretch on dorsal root ganglion neuronal growth and the underlying mechanisms were investigated by assessing the extension direction, neurite length, cell body size, mitochondrial membrane potential, and the expression of Sema3A and its receptors. Our results showed that cell viability significantly increased at tensile strains of 2.5, 5, and 10% for 4 h, with the most prominent effect at 5% tensile strain. Moreover, neurons migrated closer to the stretching direction at 5% tensile strain (0-12 h), while the neurons of the control group moved in a disorderly manner. Furthermore, Sema3A-Neuropilin-1/Plexin-A1 signaling pathway was found to be suppressed after mechanical stretch at 5% tensile strain for 4 h by immunofluorescence staining, immunoprecipitation, and western blot assay. Finally, a Sema3A-SiRNA (SiRNA = small interfering RNA) treatment led to remarkable guidance growth in the stretch-grown neurons. Importantly, there was significant decrease of repulsive cue Sema3A expression and remarkable increase of attractive molecule Netrin-1 expression after mechanical stretching treatment, which jointly promoted neurite outgrowth. This study provides a promising new approach for the development of mechanical stretching therapy or guidance factor-related drugs in injured neuronal regeneration.

Onboard early detection and mitigation of lithium plating in fast-charging batteries.

Fast-charging is considered as one of the most desired features needed for lithium-ion batteries to accelerate the mainstream adoption of electric vehicles. However, current battery charging protocols mainly consist of conservative rate steps to avoid potential hazardous lithium plating and its associated parasitic reactions. A highly sensitive onboard detection method could enable battery fast-charging without reaching the lithium plating regime. Here, we demonstrate a novel differential pressure sensing method to precisely detect the lithium plating event. By measuring the real-time change of cell pressure per unit of charge (dP/dQ) and comparing it with the threshold defined by the maximum of dP/dQ during lithium-ion intercalation into the negative electrode, the onset of lithium plating before its extensive growth can be detected with high precision. In addition, we show that by integrating this differential pressure sensing into the battery management system (BMS), a dynamic self-regulated charging protocol can be realized to effectively extinguish the lithium plating triggered by low temperature (0 °C) while the conventional static charging protocol leads to catastrophic lithium plating at the same condition. We propose that differential pressure sensing could serve as an early nondestructive diagnosis method to guide the development of fast-charging battery technologies.

Rationally Engineering a CuO/Pd@SiO2 Core-Shell Catalyst with Isolated Bifunctional Pd and Cu Active Sites for n-Butylamine Controllable Decomposition.

Volatile organic amines are a category of typical volatile organic compounds (VOCs) extensively presented in industrial exhausts causing serious harm to the atmospheric environment and human health. Monometallic Pd and Cu-based catalysts are commonly adopted for catalytic destruction of hazardous organic amines, but their applications are greatly limited by the inevitable production of toxic amide and NOx byproducts and inferior low-temperature activity. Here, a CuO/Pd@SiO2 core-shell-structured catalyst with diverse functionalized active sites was creatively developed, which realized the total decomposition of n-butylamine at 260 °C with a CO2 yield and N2 selectivity reaching up to 100% and 98.3%, respectively (obviously better than those of Pd@SiO2 and CuO/SiO2), owing to the synergy of isolated Pd and Cu sites in independent mineralization of n-butylamine and generation of N2, respectively. The formation of amide and short-chain aliphatic hydrocarbon intermediates via C-C bond cleavage tended to occur over Pd sites, while the C-N bond was prone to breakage over Cu sites, generating NH2· species and long free-N chain intermediates at low temperatures, avoiding the production of hazardous amide and NOx. The SiO2 channel collapse and H+ site production resulted in the formation of N2O via suppressing NH2· diffusion. This work provides critical guidance for a rational fabrication of catalysts with high activity and N2 selectivity for environmentally friendly destruction of nitrogen-containing VOCs.