RESUMO
The integration of visual algorithms with infrared imaging technology has become an effective tool for industrial gas leak detection. However, existing research has mostly focused on simple scenarios where a gas plume is clearly visible, with limited studies on detecting gas in complex scenes where target contours are blurred and contrast is low. This paper uses a cooled mid-wave infrared (MWIR) system to provide high sensitivity and fast response imaging and proposes the MWIRGas-YOLO network for detecting gas leaks in mid-wave infrared imaging. This network effectively detects low-contrast gas leakage and segments the gas plume within the scene. In MWIRGas-YOLO, it utilizes the global attention mechanism (GAM) to fully focus on gas plume targets during feature fusion, adds a small target detection layer to enhance information on small-sized targets, and employs transfer learning of similar features from visible light smoke to provide the model with prior knowledge of infrared gas features. Using a cooled mid-wave infrared imager to collect gas leak images, the experimental results show that the proposed algorithm significantly improves the performance over the original model. The segment mean average precision reached 96.1% (mAP50) and 47.6% (mAP50:95), respectively, outperforming the other mainstream algorithms. This can provide an effective reference for research on infrared imaging for gas leak detection.
RESUMO
Propanil residues can contaminate habitats where microbial degradation is predominant. In this study, an efficient propanil-degrading strain C-1 was isolated from paddy and identified as Rhodococcus sp. It can completely degrade 10 µg/L-150 mg/L propanil within 0.33-10 h via the hydrolysis of the amide bond, forming 3,4-dichloroaniline. A novel bifunctional amidase, PamC, was identified in strain C-1. PamC can catalyze the hydrolysis of the amide bond of propanil to produce 3,4-dichloroaniline as well as the hydrolysis of the ester bonds of aryloxyphenoxypropionate herbicides (APPHs, clodinafop-propargyl, cyhalofop-butyl, fenoxaprop-p-ethyl, fluazifop-p-butyl, haloxyfop-p-methyl, and quizalofop-p-ethyl) to form aryloxyphenoxypropionic acids. Molecular docking and site-directed mutagenesis confirmed that the catalytic triad Lys82-Ser157-Ser181 was the active center for PamC to hydrolyze propanil and cyhalofop-butyl. This study presents a novel bifunctional amidase with capabilities for both amide and ester bond hydrolysis and enhances our understanding of the molecular mechanisms underlying the degradation of propanil and APPHs.
Assuntos
Amidoidrolases , Proteínas de Bactérias , Biodegradação Ambiental , Herbicidas , Propanil , Rhodococcus , Rhodococcus/enzimologia , Rhodococcus/genética , Rhodococcus/metabolismo , Herbicidas/metabolismo , Herbicidas/química , Proteínas de Bactérias/metabolismo , Proteínas de Bactérias/genética , Proteínas de Bactérias/química , Propanil/metabolismo , Propanil/química , Amidoidrolases/metabolismo , Amidoidrolases/química , Amidoidrolases/genética , Simulação de Acoplamento Molecular , Hidrólise , BiocatáliseRESUMO
BACKGROUND: This retrospective cohort study aims to compare the effectiveness and safety of warfarin, rivaroxaban, and dabigatran in atrial fibrillation (AF) patients with different CHA2DS2-VASc scores in northern China. METHODS: A retrospective cohort study was performed to evaluate anticoagulation in AF patients at the second affiliated hospital of Harbin Medical University from September 2018 to August 2019. Patients included in this study (n = 806) received warfarin (n = 300), or rivaroxaban (n = 203), or dabigatran (n = 303). Baseline characteristics and follow-up data including adherence, bleeding events and ischemic stroke (IS) events were collected. RESULTS: Patients receiving rivaroxaban (73.9%) or dabigatran (73.6%) showed better adherence than those receiving warfarin (56.7%). Compared with warfarin-treated patients, dabigatran-treated patients had lower incidence of bleeding events (10.9% vs 19.3%, χ2 = 8.385, P = 0.004) and rivaroxaban-treated patients had lower incidence of major adverse cardiovascular events (7.4% vs 13.7%, χ2 = 4.822, P = 0.028). We classified patients into three groups based on CHA2DS2-VASc score (0-1, 2-3, ≥ 4). In dabigatran intervention, incidence of bleeding events was higher in patients with score 0-1 (20.0%) than those with score 2-3 (7.9%, χ2 = 5.772, P = 0.016) or score ≥ 4 (8.6%, χ2 = 4.682, P = 0.030). Patients with score 0-1 in warfarin or rivaroxaban therapy had a similar but not significant increase of bleeding compared with patients with score 2-3 or score ≥ 4, respectively. During the follow-up, 33 of 806 patients experienced IS and more than half (19, 57.6%) were patients with score ≥ 4. Comparing patients with score 0-1 and 2-3, the latter had an significant reduction of IS in patients prescribed warfarin and non-significant reduction in rivaroxaban and dabigatran therapy. CONCLUSION: Compared with warfarin therapy, patients with different CHA2DS2-VASc scores receiving either rivaroxaban or dabigatran were associated with higher persistence. AF patients with score ≥ 4 were more likely to experience IS events while hemorrhagic tendency preferred patients with low score 0-1.
Assuntos
Anticoagulantes , Fibrilação Atrial , Dabigatrana , Hemorragia , Rivaroxabana , Varfarina , Humanos , Fibrilação Atrial/tratamento farmacológico , Fibrilação Atrial/diagnóstico , Fibrilação Atrial/complicações , Dabigatrana/efeitos adversos , Dabigatrana/uso terapêutico , Dabigatrana/administração & dosagem , Rivaroxabana/efeitos adversos , Rivaroxabana/uso terapêutico , Rivaroxabana/administração & dosagem , Estudos Retrospectivos , Varfarina/efeitos adversos , Varfarina/uso terapêutico , Masculino , Feminino , Idoso , Hemorragia/induzido quimicamente , Pessoa de Meia-Idade , Resultado do Tratamento , Medição de Risco , Fatores de Risco , Anticoagulantes/efeitos adversos , Anticoagulantes/uso terapêutico , Anticoagulantes/administração & dosagem , China/epidemiologia , Fatores de Tempo , Inibidores do Fator Xa/efeitos adversos , Inibidores do Fator Xa/uso terapêutico , Inibidores do Fator Xa/administração & dosagem , Antitrombinas/efeitos adversos , Antitrombinas/uso terapêutico , Antitrombinas/administração & dosagem , Idoso de 80 Anos ou mais , Adesão à Medicação , Técnicas de Apoio para a Decisão , Coagulação Sanguínea/efeitos dos fármacosRESUMO
BACKGROUND: Compared to traditional supervised machine learning approaches employing fully labeled samples, positive-unlabeled (PU) learning techniques aim to classify "unlabeled" samples based on a smaller proportion of known positive examples. This more challenging modeling goal reflects many real-world scenarios in which negative examples are not available-posing direct challenges to defining prediction accuracy and robustness. While several studies have evaluated predictions learned from only definitive positive examples, few have investigated whether correct classification of a high proportion of known positives (KP) samples from among unlabeled samples can act as a surrogate to indicate model quality. RESULTS: In this study, we report a novel methodology combining multiple established PU learning-based strategies with permutation testing to evaluate the potential of KP samples to accurately classify unlabeled samples without using "ground truth" positive and negative labels for validation. Multivariate synthetic and real-world high-dimensional benchmark datasets were employed to demonstrate the suitability of the proposed pipeline to provide evidence of model robustness across varied underlying ground truth class label compositions among the unlabeled set and with different proportions of KP examples. Comparisons between model performance with actual and permuted labels could be used to distinguish reliable from unreliable models. CONCLUSIONS: As in fully supervised machine learning, permutation testing offers a means to set a baseline "no-information rate" benchmark in the context of semi-supervised PU learning inference tasks-providing a standard against which model performance can be compared.
Assuntos
Aprendizado de Máquina , Aprendizado de Máquina Supervisionado , Humanos , Biologia Computacional/métodos , AlgoritmosRESUMO
Body sizes and head anatomical characteristics play the major role in the head injuries sustained by vulnerable road users (VRU) in traffic accidents. In this study, in order to study the influence mechanism of body sizes and head anatomical characteristics on head injury, we used age, gender, height, and Body Mass Index (BMI) as characteristic parameters to develop the personalized human body multi-rigid body (MB) models and head finite element (FE) models. Next, using simulation calculations, we developed the VRU head injury dataset based on the personalized models. In the dataset, the dependent variables were the degree of head injury and the brain tissue von Mises value, while the independent variables were height, BMI, age, gender, traffic participation status, and vehicle speed. The statistical results of the dataset show that the von Mises value of VRU brain tissue during collision ranges from 4.4 kPa to 46.9 kPa at speeds between 20 and 60 km/h. The effects of anatomical characteristics on head injury include: the risk of a more serious head injury of VRU rises with age; VRU with higher BMIs has less head injury in collision accidents; height has very erratic and nonlinear impacts on the von Mises values of the VRU's brain tissue; and the severity of head injury is not significantly influenced by VRU's gender. Furthermore, we developed the classification prediction models of head injury degree and the regression prediction models of head injury response parameter by applying eight different data mining algorithms to this dataset. The classification prediction models have the best accuracy of 0.89 and the best R2 value of 0.85 for the regression prediction models.
RESUMO
Under damp or aquatic conditions, the corrosion products deposited on micro-cracks/pore sites bring about the failure of intrinsically healable organic coatings. Inspired by mussels, a composite coating of poly (methyl methacrylate-co-butyl acylate-co-dopamine acrylamide)/phenylalanine-functionalized boron nitride (PMBD/BN-Phe) is successfully prepared on the reinforcing steel, which exhibits excellent anti-corrosion and underwater self-healing capabilities. The self-healing property of PMBD is derived from the synergistic effect of hydrogen bonding and metal-ligand coordination bonding, and thereby the continuous generation of corrosion products can be significantly suppressed through in situ capture of cations by the catechol group. Furthermore, the corrosion protection ability can be remarkably improved by the labyrinth effect of BN and the inhibition role of Phe, and the desired interfacial compatibility can be formed by the hydrogen bonds between BN-Phe and PMBD matrix. The corrosion current density (icorr) of PMBD/BN-Phe coating is determined as 7.95 × 10-11 A cm-2. The low-frequency impedance modulus (|Z|f = 0.0 1 Hz is remained at 3.47 × 109 Ω cm2, indicating an ultra-high self-healing efficiency (≈89.5%). It is anticipated to provide a unique strategy for development of an underwater self-healing coating and robust durability for application in anti-corrosion engineering of marine buildings.
RESUMO
The construction of gating system in artificial channels is a cutting-edge research direction in understanding biological process and application sensing. Here, by mimicking the gating system, we report a device that easily synthesized single-glass micropipettes functionalized by three-dimensional (3D) DNA network, which triggers the gating mechanism for the detection of biomolecules. Based on this strategy, the gating mechanism shows that single-glass micropipette assembled 3D DNA network is in the "OFF" state, and after collapsing in the presence of ATP, they are in the "ON" state, at which point they exhibit asymmetric response times. In the "ON" process of the gating mechanism, the ascorbic acid phosphate (AAP) can be encapsulated by a 3D DNA network and released in the presence of adenosine triphosphate (ATP), which initiates a catalyzed cascade reaction under the influence of alkaline phosphatase (ALP). Ultimately, the detection of ALP can be responded to form the fluorescence signal generated by terephthalic acid that has captured hydroxyl radicals, which has a detection range of 0-250 mU/mL and a limit of detection of 50 mU/mL. This work provides a brand-new way and application direction for research of gating mechanism.
Assuntos
Trifosfato de Adenosina , Fosfatase Alcalina , DNA , Trifosfato de Adenosina/análise , Trifosfato de Adenosina/química , Trifosfato de Adenosina/metabolismo , Fosfatase Alcalina/metabolismo , Fosfatase Alcalina/química , DNA/química , Vidro/química , Técnicas Biossensoriais/métodos , Limite de Detecção , Ácido Ascórbico/química , Ácido Ascórbico/análogos & derivadosRESUMO
Human skin sensing of mechanical stimuli originates from transduction of mechanoreceptors that converts external forces into electrical signals. Although imitating the spatial distribution of those mechanoreceptors can enable developments of electronic skins capable of decoupled sensing of normal/shear forces and strains, it remains elusive. We report a three-dimensionally (3D) architected electronic skin (denoted as 3DAE-Skin) with force and strain sensing components arranged in a 3D layout that mimics that of Merkel cells and Ruffini endings in human skin. This 3DAE-Skin shows excellent decoupled sensing performances of normal force, shear force, and strain and enables development of a tactile system for simultaneous modulus/curvature measurements of an object through touch. Demonstrations include rapid modulus measurements of fruits, bread, and cake with various shapes and degrees of freshness.
Assuntos
Mecanorreceptores , Pele Artificial , Tato , Dispositivos Eletrônicos Vestíveis , Humanos , Mecanorreceptores/fisiologia , Células de Merkel/fisiologia , Pele/inervação , Fenômenos Fisiológicos da PeleRESUMO
Achieving selective transport of monovalent metal ions with high precision and permeability analogues to biological protein ion channels has long been explored for fundamental research and various applications, such as ion sieving, mineral extraction, and energy harvesting and conversion. However, it still remains a significant challenge to construct artificial nanofluidic devices to realize the trade-off effects between selective ion transportation and high ion permeability. In this work, we report a bioinspired functional micropipet with in situ growth of crown ether-encapsulated metal-organic frameworks (MOFs) inside the tip and realize selective transport of monovalent metal ions. The functional ion-selective micropipet with sub-nanochannels was constructed by the interfacial growth method with the formation of composite MOFs consisting of ZIF-8 and 15-crown-5. The resulting micropipet device exhibited obvious monovalent ion selectivity and high flux of Li+ due to the synergistic effects of size sieving in subnanoconfined space and specific coordination of 15-crown-5 toward Na+. The selectivity of Li+/Na+, Li+/K+, Li+/Ca2+, and Li+/Mg2+ with 15-crown-5@ZIF-8-functionalized micropipet reached 3.9, 5.2, 105.8, and 122.4, respectively, which had an obvious enhancement compared to that with ZIF-8. Notably, the ion flux of Li+ can reach up to 93.8 ± 3.6 mol h-1·m-2 that is much higher than previously reported values. Furthermore, the functional micropipet with 15-crown-5@ZIF-8 sub-nanochannels exhibited stable Li+ selectivity under various conditions, such as different ion concentrations, pH values, and mixed ion solutions. This work not only provides new opportunities for the development of MOF-based nanofluidic devices for selective ion transport but also facilitates the promising practical applications in lithium extraction from salt-like brines, sewage treatment, and other related aspects.
RESUMO
Emulating biological sodium ion channels to achieve high selectivity and rapid Na+ transport is important for water desalination, energy conversion, and separation processes. However, the development of artificial ion channels, especially multichannels, to achieve high ion selectivity, remains a challenge. In this work, we demonstrate the fabrication of ion channel membranes utilizing crown-ether crystals (DA18C6-nitrate crystals), which feature extremely consistent subnanometer pores. The polyethylene terephthalate (PET) membranes were initially subjected to amination, followed by the in situ growth of DA18C6-nitrate crystals to establish ordered multichannels aimed at facilitating selective Na+ conductance. These channels allow rapid Na+ transport while inhibiting the migration of other ions (K+ and Ca2+). The Na+ transport rate was 2.15 mol m-2 h-1, resulting in the Na+/K+ and Na+/Ca2+ selectivity ratios of 6.53 and 12.56, respectively. Due to the immobilization of the crown-ether ring, when the size of the transmembrane ion exceeded that of the crown-ether ring's cavity, the ions had to undergo a dehydration process to pass through the channel. This resulted in the ions encountering a higher energy barrier upon entering the channel, making it more difficult for them to permeate. However, the size of Na+ was compatible with the cavity of the crown-ether ring and was able to displace the hydrated layer effectively, facilitating selective Na+ translocation. In summary, this research offers a promising approach for the future development of functionalized ion channels and efficient membrane materials tailored for high-performance Na+ separation.
RESUMO
MicroRNAs (miRNAs) are endogenous and noncoding single-stranded RNA molecules with a length of approximately 18-25 nucleotides, which play an undeniable role in early cancer screening. Therefore, it is very important to develop an ultrasensitive and highly specific method for detecting miRNAs. Here, we present a bottom-up assembly approach for modifying glass microtubes with silica nanowires (SiNWs) and develop a label-free sensing platform for miRNA-21 detection. The three-dimensional (3D) networks formed by SiNWs make them abundant and highly accessible sites for binding with peptide nucleic acid (PNA). As a receptor, PNA has no phosphate groups and exhibits an overall electrically neutral state, resulting in a relatively small repulsion between PNA and RNA, which can improve the hybridization efficiency. The SiNWs-filled glass microtube (SiNWs@GMT) sensor enables ultrasensitive, label-free detection of miRNA-21 with a detection limit as low as 1 aM at a detection range of 1 aM-100 nM. Noteworthy, the sensor can still detect miRNA-21 in the range of 102-108 fM in complex solutions containing 1000-fold homologous interference of miRNAs. The high anti-interference performance of the sensor enables it to specifically recognize target miRNA-21 in the presence of other miRNAs and distinguish 1-, 3-mismatch nucleotide sequences. Significantly, the sensor platform is able to detect miRNA-21 in the lysate of breast cancer cell lines (e.g., MCF-7 cells and MDA-MB-231 cells), indicating that it has good potential in the screening of early breast cancers.
Assuntos
Vidro , MicroRNAs , Nanofios , Ácidos Nucleicos Peptídicos , Dióxido de Silício , MicroRNAs/análise , Ácidos Nucleicos Peptídicos/química , Dióxido de Silício/química , Humanos , Nanofios/química , Vidro/química , Técnicas Biossensoriais/métodos , Limite de DetecçãoRESUMO
Microcellulose materials are increasingly considered multifunctional candidates for emerging energy applications. Microcellulose fibers (MCF) are a kind of bio-based reinforcement in composites, and their hydrophilic character hinders their wide application in industry. Thus, in the present work, MCF was hybrid-modified by amino silicone oil-phosphorylated to fabricate hydrophobic, thermal stability, and flame-retardant microcellulose fibers for potential application in vehicle engineering. The results showed that the amino silicone oil-phosphorylated (ASOP) hybrid modification could transform the surface property of microcellulose from hydrophilic to hydrophobic and improve the compatibility between MCF and resin matrix. Meanwhile, the ASOP treatment led to the formation of an amino silicone oil film layer on the surface of the microcellulose, which improved the thermal stability of the MCF. Furthermore, the ASOP hybrid modification microcellulose fibers paper (100% microcellulose fibers paper) was transformed from flammable to flame-retardant and showed self-extinguishing behavior after burning under flame for 2 s. The flame-retardant mechanism was attributed to the formation of the char layer in the condensed phase and the production of non-combustible gases in the gaseous phase.
RESUMO
DNA carries genetic information and can serve as an important biomarker for the early diagnosis and assessment of the disease prognosis. Here, we propose a bottom-up assembly method for a silica nanowire-filled glass microporous (SiNWs@GMP) sensor and develop a universal sensing platform for the ultrasensitive and specific detection of DNA. The three-dimensional network structure formed by SiNWs provides them with highly abundant and accessible binding sites, allowing for the immobilization of a large amount of capture probe DNA, thereby enabling more target DNA to hybridize with the capture probe DNA to improve detection performance. Therefore, the SiNWs@GMP sensor achieves ultrasensitive detection of target DNA. In the detection range of 1 aM to 100 fM, there is a good linear relationship between the decrease rate of current signal and the concentration of target DNA, and the detection limit is as low as 1 aM. The developed SiNWs@GMP sensor can distinguish target DNA sequences that are 1-, 3-, and 5-mismatched, and specifically recognize target DNA from complex mixed solution. Furthermore, based on this excellent selectivity and specificity, we validate the universality of this sensing strategy by detecting DNA (H1N1 and H5N1) sequences associated with the avian influenza virus. By replacing the types of nucleic acid aptamers, it is expected to achieve a wide range and low detection limit sensitive detection of various biological molecules. The results indicate that the developed universal sensing platform has ultrahigh sensitivity, excellent selectivity, stability, and acceptable reproducibility, demonstrating its potential application in DNA bioanalysis.
Assuntos
Técnicas Biossensoriais , Vidro , Limite de Detecção , Nanofios , Dióxido de Silício , Vidro/química , Dióxido de Silício/química , Nanofios/química , Técnicas Biossensoriais/métodos , DNA/química , Porosidade , Virus da Influenza A Subtipo H5N1 , Vírus da Influenza A Subtipo H1N1/isolamento & purificação , DNA Viral/análise , Técnicas Eletroquímicas/métodos , Técnicas Eletroquímicas/instrumentaçãoRESUMO
This study investigated whether Safflower Yellow for injection (SYI) would affect the anticoagulation of warfarin in rats.Wistar male rats were divided into six groups randomly and administered with SYI (9 mg/kg, intraperitoneal injection) in single-dose and steady-dose warfarin (0.2 mg/kg, oral gavage), respectively. The pharmacodynamic parameters of PT and APTT were measured by a coagulation analyser. R/S-warfarin concentration was measured by UHPLC-MS/MS, and pharmacokinetic parameters calculated using DAS 2.0 software.The single-dose study demonstrated that SYI, alone or co-administered with warfarin, could significantly increase PT, INR, and APTT values (p < 0.01). R-warfarin Cmax, AUC, and t1/2 values increased by 9.25% (p > 0.05), 25.96% (p < 0.01), and 26.17% (p < 0.01), respectively, whereas the CL/F value reduced by 22.22% (p < 0.01) in the presence of SYI. Meanwhile, S-warfarin Cmax, AUC, and t1/2 values increased by 37.41%, 32.11%, and 31.73% (all p < 0.01), respectively, whereas the CL/F value reduced by 33.33% (p < 0.01). The steady-dose study showed that PT, INR, APTT, and the concentrations of R/S-warfarin increased significantly when SYI was co-administered with warfarin (p < 0.01).SYI can enhance warfarin's anticoagulation intensity and decelerate its metabolism in rats.
Assuntos
Anticoagulantes , Chalcona/análogos & derivados , Varfarina , Ratos , Masculino , Animais , Varfarina/farmacocinética , Anticoagulantes/farmacocinética , Espectrometria de Massas em Tandem , Ratos WistarRESUMO
Biochar is a promising sorbent for Cd removal from water, while the disposal of the exhausted Cd-enriched biochar remains a challenge. In this study, pyrolysis was employed to treat the exhausted biochar under N2 and CO2 atmospheres at 600-900 °C, and the fate of Cd during pyrolysis and characteristics of high-valued products were determined. The results indicated that higher temperature and CO2 atmosphere favored the volatilization of Cd. Based on the toxicity characteristic leaching procedure (TCLP) results, the pyrolysis treatment under both atmospheres enhanced the stability of Cd, and the leached Cd concentration of regenerated biochar obtained at high temperatures (>800 °C) was lower than 1 mg/L. Compared with the pristine biochar, the regenerated biochar demonstrated higher carbon content and pH, whereas the contents of oxygen and hydrogen declined, and exhibited promising sorption properties (35.79 mg/g). The atmosphere played an important role in modifying biochar properties and syngas composition. The N2 atmosphere facilitated CH4 production, whereas the CO2 atmosphere increased the proportion of CO. These results implied that pyrolysis can be a valuable and environmental-friendly strategy for the treatment and reuse of exhausted biochar sorbent.
Assuntos
Cádmio , Pirólise , Dióxido de Carbono , Carvão Vegetal/químicaRESUMO
Prelithiation is an essential technology to compensate for the initial lithium loss of lithium-ion batteries due to the formation of solid electrolyte interphase (SEI) and irreversible structure change. However, the prelithiated materials/electrodes become more reactive with air and electrolyte resulting in unwanted side reactions and contaminations, which makes it difficult for the practical application of prelithiation technology. To address this problem, herein, interphase engineering through a simple solution treatment after chemical prelithiation is proposed to protect the prelithiated electrode. The used solutions are carefully selected, and the composition and nanostructure of the as-formed artificial SEIs are revealed by cryogenic electron microscopy and X-ray photoelectron spectroscopy. The electrochemical evaluation demonstrates the unique merits of this artificial SEI, especially for the fluorinated interphase, which not only enhances the interfacial ion transport but also increases the tolerance of the prelithiated electrode to the air. The treated graphite electrode shows an initial Coulombic efficiency of 129.4%, a high capacity of 170 mAh g-1 at 3 C, and negligible capacity decay after 200 cycles at 1 C. These findings not only provide a facile, universal, and controllable method to construct an artificial SEI but also enlighten the upgrade of battery fabrication and the alternative use of advanced electrolytes.
RESUMO
With the continuous improvement in people's living standards and the change in consumption concept, green food is favored by more and more consumers. Consumer repurchase behavior is a necessary condition to activate the market, expand the consumption scale and stabilize the continuous growth of the market. Repurchase intention is the most direct factor affecting consumers' green food repurchase intention. Therefore, it is necessary to study consumers green food repurchase intentions. This study collects data from 303 consumer surveys on green food consumption to explore the impact of consumer satisfaction with consumption experience on green food repurchase intention and further explore the mechanisms and influence boundaries. The results show that (1) consumer experience satisfaction positively affects green food repurchase intention; (2) consumer experience satisfaction can improve consumers' green food repurchase intention through consumer perceptions of social value, green self-efficacy and warm glow; (3) the higher the degree of consumer inertia, the stronger the influence of green self-efficacy and warm glow on consumers' green food repurchase intention; and (4) the higher the degree of consumer subjective norms, the stronger the influence of consumer perceived social value, green self-efficacy and warm glow on the consumer's green food repurchase intention. This study provides a new perspective and theoretical framework for promoting consumers' green food repurchase intention, and it may have certain theoretical significance and practical impact on green food market growth, sustainable carrying of the ecological environment and high-quality development of agriculture.
RESUMO
Graft-host mechanical mismatch has been a longstanding issue in clinical applications of synthetic scaffolds for soft tissue regeneration. Although numerous efforts have been devoted to resolve this grand challenge, the regenerative performance of existing synthetic scaffolds remains limited by slow tissue growth (comparing to autograft) and mechanical failures. We demonstrate a class of rationally designed flexible network scaffolds that can precisely replicate nonlinear mechanical responses of soft tissues and enhance tissue regeneration via reduced graft-host mechanical mismatch. Such flexible network scaffold includes a tubular network frame containing inversely engineered curved microstructures to produce desired mechanical properties, with an electrospun ultrathin film wrapped around the network to offer a proper microenvironment for cell growth. Using rat models with sciatic nerve defects or Achilles tendon injuries, our network scaffolds show regenerative performances evidently superior to that of clinically approved electrospun conduit scaffolds and achieve similar outcomes to autologous nerve transplantation in prevention of target organ atrophy and recovery of static sciatic index.
Assuntos
Biomimética , Filmes Cinematográficos , Animais , Ratos , Proliferação de Células , Atrofia , Ciclo CelularRESUMO
Architected flexible electronic devices with rationally designed 3D geometries have found essential applications in biology, medicine, therapeutics, sensing/imaging, energy, robotics, and daily healthcare. Mechanically-guided 3D assembly methods, exploiting mechanics principles of materials and structures to transform planar electronic devices fabricated using mature semiconductor techniques into 3D architected ones, are promising routes to such architected flexible electronic devices. Here, we comprehensively review mechanically-guided 3D assembly methods for architected flexible electronics. Mainstream methods of mechanically-guided 3D assembly are classified and discussed on the basis of their fundamental deformation modes (i.e., rolling, folding, curving, and buckling). Diverse 3D interconnects and device forms are then summarized, which correspond to the two key components of an architected flexible electronic device. Afterward, structure-induced functionalities are highlighted to provide guidelines for function-driven structural designs of flexible electronics, followed by a collective summary of their resulting applications. Finally, conclusions and outlooks are given, covering routes to achieve extreme deformations and dimensions, inverse design methods, and encapsulation strategies of architected 3D flexible electronics, as well as perspectives on future applications.
RESUMO
Consortium blockchains offer privacy for members while allowing supervision peers access to on-chain data under certain circumstances. However, current key escrow schemes rely on vulnerable traditional asymmetric encryption/decryption algorithms. To address this issue, we have designed and implemented an enhanced post-quantum key escrow system for consortium blockchains. Our system integrates NIST post-quantum public-key encryption/KEM algorithms and various post-quantum cryptographic tools to provide a fine-grained, single-point-of-dishonest-resistant, collusion-proof and privacy-preserving solution. We also offer chaincodes, related APIs, and invoking command lines for development. Finally, we perform detailed security analysis and performance evaluation, including the consumed time of chaincode execution and the needed on-chain storage space, and we also highlight the security and performance of related post-quantum KEM algorithms on consortium blockchain.