High-power repetition rate- and pulse width-tunable 589†nm versatile laser for adaptive optical systems.

Compact high-power yellow laser is a critical part for sodium beacon adaptive optical systems. A narrow-linewidth quasi-continuous-wave (QCW) solid-state 589 nm laser with high-power and high beam quality simultaneously is investigated here, operating in hundreds-microsecond pulse duration with a tunable repetition rate of 400 to 1 kHz, which is flexible to allow the telescope to move in observing direction. The laser source is based on employing sum-frequency generation between 1319 and 1064 nm QCW Nd:YAG amplifiers. For a 100 µs pulse duration and 400 Hz repetition rate, the yellow laser provides a highest output power of 86.1 W with beam quality M2 = 1.37. The central wavelength can be precisely tuned to sodium-D2a line at 589.159 nm with a ∼440 MHz linewidth. This is the maximum power-reported for all-solid-state sodium guide star laser demonstrated to date. The result represents a key step toward solving the requirement of multi-conjugate adaptive optics for large adaptive optical telescopes.

Void-free bonding for a large slab laser crystal.

A void-free bonding technique was demonstrated for a large slab Nd: YAG crystal with a bonding surface dimension of ∼160mm×70mm. By using the novel fluxless oxide layer removal technology, the indium-oxide barrier problem was resolved. With the help of electrochemical-polished indium solder and a plasma-cleaned heat sink, the solderability of the indium was enhanced; in particular, the contact angle of the solder was improved from 51° to 31°. With the largest-bonding-size slab, a single-slab laser created a maximum output power of 7.3 kW under an absorbed pump power of 12.8 kW, corresponding to an optical to optical efficiency of 57% and a slope conversion of 67.8%. By detecting the wavefront of the interferometer before and after bonding, the RMS of wavefront was 0.192λ and 0.434λ (λ=633nm), respectively. To the best of our knowledge, this is the largest void-free bonding size for a laser slab and the highest output power achieved from a single-slab crystal laser oscillator.

30 W single-frequency continuous-wave master oscillator power amplifier laser at 1342 nm.

We present a power-scalable high-power single-frequency continuous-wave 1342 nm master oscillator power amplifier (MOPA) system that consists of a polarized single-frequency 1342 nm LD seed laser, a Raman fiber preamplifier, and a three-stage ${\rm Nd}:{{\rm YVO}_4}$Nd:YVO4 power amplifier. The single-frequency output power of 30 W at 1342 nm is achieved with the beam quality factors ${{\rm M}^{2\:}} = {1}.{26}$M2=1.26, and the power stability for 1 h is better than ${\pm }\;{0}.{5}\% $±0.5%.

High-repetition-rate 100 W level sodium beacon laser for a multi-conjugate adaptive optics system.

A 100 W level kilohertz repetition-rate microsecond (µs)-pulse all-solid-state sodium beacon laser at 589 nm is demonstrated for the first time, to the best of our knowledge, via combining two independent µs-pulsed lasers. Each beamlet is generated by the sum-frequency mixing of pulsed 1064 and 1319 nm lasers in a lithium triborate (LBO) crystal, which operate at 500 Hz pulse repetition frequency with 61 W $p$p-polarized and 53 W $s$s-polarized output, respectively. An incoherent sequence combining technology of polarized laser beams is employed to add the two beamlets. The average power of the combined beam is up to 107.5 W with a combining efficiency of 94.3%. The combined beam has a 1 kHz repetition rate with ${\sim}{120}\;\unicode{x00B5} {\rm s}$∼120µs pulse duration and beam quality ${M^2} = {1.41}$M2=1.41. The central wavelength with a linewidth of ${\sim}{0.3}\;{\rm GHz}$∼0.3GHz is locked to a sodium ${{\rm D}_{2a}}$D2a absorption line. To the best of our knowledge, this is a record-high power operating at kilohertz for µs-pulsed solid-state sodium beacon lasers.

Pulse duration adjusted by changing the cavity length with a multi-pass cavity in a Q-switched Nd:YAG laser.

We report a compact, long nanosecond (ns) pulse duration stretched laser source by a multi-pass cavity (MPC). Based on the combination of the MPC and pump power, a high-power high beam quality 1064 nm Q-switched Nd:YAG laser with a pulse duration adjustable over the range of 160-1000 ns was obtained at a pulse repetition frequency of 10 kHz for the first time, to the best of our knowledge. At a typical pulse width of 560 ns, an average output power of 10.6 W was successfully achieved. The beam quality factor M2 was measured to be 1.45 with a good Gaussian mode.

Watt level laser source for a polychromatic laser guide stars: double resonant fluorescence from 3S1/2-3P3/2-3D5/2 transition of sodium atoms.

The polychromatic laser guide star (PLGS) is one of the solutions proposed to measure the differential atmospheric tip-tilt. A watts-level microsecond pulse all solid state laser source with two wavelengths at 589 and 819.7 nm are developed to perform a proof-of-concept on-sky test for what is believed to be the first time. By sum-frequency of 1319 and 1064 nm, a 44 W maximum average output power at 589.159 nm is generated with the pulse width of ~90 µs at 500 Hz, the linewidth of 0.46 pm, and the beam quality of M2 = 1.50. Meanwhile, a 2.4 W average output power is achieved operating at 819.710 nm with the pulse width of ~25 µs at 500 Hz, the linewidth of 0.8 pm, and beam quality factor of M2 = 1.20, which is end-pumped by a frequency-doubled 1064 nm Nd:YAG laser. Moreover, double resonant fluorescence in sodium cell with two step excitation of sodium atom from 3S1/2 to 3D5/2 via 3P3/2 level is observed clearly by tuning the wavelength of 589 and 819.7 nm beams. In the proof-of-principle experiment, it is preliminarily verified that this laser system is expected to be applied to the sky experiment.

Picosecond slab regenerative amplifier using a large fundamental mode stable-unstable hybrid cavity.

Slab gain media with large aspect ratios were difficult to be adopted in ultrafast regenerative amplifiers (RAs) due to the obstacle of mode matching with the seed beam. We proposed that an unstable cavity could be employed to solve this difficulty by taking the advantage of its large fundamental mode volume. In this way, an Nd:YVO4 slab-based picosecond RA has been successfully demonstrated using a stable-unstable hybrid cavity. The maximum average output power of 10.5 W was achieved at the repetition rate of 10 kHz. The beam quality factor M2 was measured to be 1.54 in the stable direction and 2.26 in the unstable direction.

High-energy single-frequency 167 nm deep-ultraviolet laser.

We report a high-energy single-frequency deep-ultraviolet (DUV) solid-state laser at 167.079 nm by the eighth-harmonic generation of a diode-pumped Nd:LGGG laser. A maximum DUV laser output energy of 1.5 µJ at a 5 Hz repetition rate with a 200 µs pulse duration is achieved. The central wavelength of the DUV laser is located at 167.079 nm and can be finely tuned from 167.075 to 167.083 nm. The linewidth is estimated to be 0.025 pm. To the best of our knowledge, this is the first Letter reporting a high-energy single-frequency solid-state DUV laser below 170 nm. The successful demonstration of the high-energy single-frequency DUV laser source with the unique wavelength is useful for direct detection of a Al+27 ion via resonance fluorescence in a multi-ion optical clock.

30.5-µJ, 10-kHz, picosecond optical parametric oscillator pumped synchronously and intracavity by a regenerative amplifier.

We have proposed a novel approach to realize a high-energy ultrafast optical parametric oscillator (OPO) by intracavity pumping in a regenerative amplifier. In this way, we have experimentally demonstrated an unprecedented pulse energy of 30.5 µJ from a 1.5-µm singly resonant synchronously pumped OPO at a pulse repetition rate of 10 kHz with a pulse width of 7.0 ps. To the best of our knowledge, this is the highest pulse energy from an ultrafast laser OPO.

High-efficiency UV generation at 266 nm in a new nonlinear optical crystal NaSr3Be3B3O9F4.

266 nm laser output in NaSr3Be3B3O9F4 crystal by the fourth harmonic generation process with a picosecond mode-locked Nd-based YAG laser has been done for the first time. When the input pumping energy was 870 µJ at 532 nm, a 280 µJ 266 nm UV laser was obtained and the corresponding conversion efficiency was 35.9%. Further investigations identified that NaSr3Be3B3O9F4 has a large acceptance angle width of 0.47 (mrad • cm), a small walk-off angle of 35.43 mrad and a large deff as 0.62 pm/V for the fourth harmonic generation. These results indicate that NSBBF is applicable for high-power 266 nm laser generation.

Pulse width adjustable Q-switched cavity dumped laser by rotating a quarter-wave plate and a Pockels cell.

A pulse width adjustable 1064 nm Q-switched cavity dumped Nd:YVO4 laser was realized for the first time, to the best of our knowledge, by rotating an intracavity quarter-wave plate (QWP) and a Pockels cell (PC). The pulse width adjustment range was 4.8-7.8 ns with a constant output power of 3.6 W, and it reached 4.8-13.5 ns for a lower output power of 1.3 W. The pulse width was dependent mostly on the rotating angle of the QWP and PC, but independent of the gain and pulse repetition rate.

Picosecond mid-infrared optical parametric amplifier based on LiInSe2 with tenability extending from 3.6 to 4.8 µm.

A picosecond (ps) mid-infrared (MIR) optical parametric amplifier (OPA) with LiInSe2 crystal was demonstrated for the first time. The MIR OPA was pumped by a 30 ps 1064 nm Nd:YAG laser and injected by a barium boron oxide (BBO)-based widely tunable near-infrared seed. A maximum idler pulse energy of 433 µJ at 4 µm has been obtained under a pump energy of 17 mJ, and the corresponding pulse duration was estimated to be ~13 ps. To our knowledge, this is the highest single pulse energy generated by LiInSe2 crystal. Furthermore, an idler spectrum tuning from 3.6 to 4.8 µm was investigated at fixed pump energy of 15 mJ.

High-power QCW microsecond-pulse solid-state sodium beacon laser with spiking suppression and D2b re-pumping.

A 65 W quasi-continuous-wave microsecond-pulse solid-state sodium beacon laser tuned to the sodium D2a line has been developed with a linewidth of 0.3 GHz, beam quality of M2=1.38, and pulse width of 120 µs at a repetition rate of 500 Hz by sum-frequency mixing 1319 and 1064 nm diode-pumped Nd:YAG master-oscillator power-amplifier systems. The laser wavelength stability is less than ±0.15 GHz through feedback controlling. The laser spiking due to relaxation oscillations is suppressed by inserting frequency doublers in both 1319 and 1064 nm oscillators. Sodium D2b re-pumping is accomplished by tuning the frequency of the electro-optic modulator with the right D2a-D2b offset. A bright sodium laser guide star with a photon return of 1820 photons/cm2/s was achieved with the laser system when a 32 W circular polarized beam was projected to the sky during our field test at the Xinglong Observatory.

Low-timing-jitter high-power mode-locked 1063 nm Nd:GdVO4 master oscillator power amplifier.

A low-timing-jitter high-power semiconductor saturable absorber mirror mode-locked picosecond (ps) 1063 nm Nd:GdVO4 master oscillator power amplifier is presented. Using a single-pass Nd:GdVO4 amplifier, an amplified laser with 21.5 W output power and 8.3 ps pulsewidth was achieved at 250 MHz repetition rate. Employing a servo control, an average RMS timing jitter of ∼222 fs was realized. This laser can be used as a drive laser for photocathode injectors in free-electron lasers.

167.75-nm vacuum-ultraviolet ps laser by eighth-harmonic generation of a 1342-nm Nd:YVO4 amplifier in KBBF.

We demonstrate a ps 167.75-nm vacuum-ultraviolet (VUV) laser by cascaded second-harmonic generation (SHG). The VUV laser is produced by eighth-harmonic generation (EHG) of a mode-locked ps 1342-nm Nd:YVO4 amplifier through three stages cascaded SHG with two LiB3O5 crystals and one KBe2BO3F2 crystal, successively. The 167.75-nm laser provides up to 65-µW output power, and the corresponding photon flux and photon flux density are 5.5×10(13) s(-1) and 1.6×10(18) s(-1)·cm(-2), respectively.

8.2 kW high beam quality quasi-continuous-wave face-pumped Nd:YAG slab amplifier.

An 8 kW level quasi-continuous-wave (QCW) face-pumped 1064 nm slab laser with high beam quality was developed by a master oscillator power amplifier (MOPA) system. A single-mode fiber seed laser was amplified by two-stage single-pass Nd:YAG rod preamplifiers and four face-pumped Nd:YAG slab amplifiers. The slab amplifiers were well designed with uniform pumping and uniform cooling for well-distributed thermal and stress. A dynamically feedbacked optical aberration compensation device was employed to correct low-order optical aberration, and the residue high-order optical aberration was corrected by an adaptive optics system. The QCW MOPA delivered up to an average power of 8.2 kW with a pulse duration of 200 µs at a repetition rate of 400 Hz. The beam quality factor was measured to be ß=3.5.

7.6 W 1342 nm passively mode-locked picosecond composite Nd:YVO4/YVO4 laser with a semiconductor saturable absorber mirror.

A high average power 1342 nm passively CW mode-locked picoseconds (ps) composite Nd:YVO4 laser was demonstrated with a semiconductor saturable absorber mirror (SESAM). The oscillator cavity was carefully designed to optimize the laser beam radii in the crystal and on the SESAM. The combination of composite bonded laser crystal, direct pumping, and dual end-pumped configuration was adopted to reduce the thermal effect and produce high output power with high beam quality. A maximum average output power of 7.63 W was obtained with a repetition rate of 77 MHz and a pulse duration of 24.2 ps under an absorbed pump power of 38.6 W, corresponding to an optical-optical efficiency of 19.7% and a slope efficiency of 25.9%, respectively. The beam quality factor M(2) was measured to be 1.49.

Sub-pm linewidth nanosecond Nd:GYSGG laser at 1336.6 nm.

We demonstrate a sub-pm linewidth acousto-optic (AO) Q-switched nanosecond Nd:GYSGG ring laser at 1336.6 nm side-pumped by 808-nm quasi-continuous wave (QCW) diode lasers for the first time. With incident pulse energy of 4.23 J at 10 Hz, a maximum output macropulse energy of 36.7 mJ at 1336.6 nm with linewidth of less than 0.85 pm and a micropulse width of 300 ns was obtained at a repetition rate of 80 Hz, corresponding to an average micropulse peak power of 15.3 kW. The M² factors were measured to be 1.42 and 1.10 in x and y directions, respectively. It can be tuned from 1336.576 to 1336.652 nm with a tuning resolution of 1 pm. The 1336.632 nm can be converted to deep ultraviolet (DUV) laser at 167.079 nm through its eighth harmonics, which is very useful for the ²7Al⁺ optical frequency standard.

Comparison of laser induced thermal fracture between polycrystalline ceramic and crystal Nd:YAG.

Continuous wave 808 nm pump laser-induced thermal damage of polycrystalline transparent ceramic and crystalline Nd:YAG materials was investigated both experimentally and theoretically. The measured temperature agrees well with the theoretical simulation, and the maximum hoop stresses occur on the incident facet of the end-pumped rod at about √2 times of the pump beam radius w0, where the temperature gradient is the highest and the damage occurs first at this location. The fracture-limited laser intensity of ceramics was experimentally measured to be 6.4±0.6 kW/cm2, nearly 64% higher than that of the crystals (3.9±0.3 kW/cm2). The deduced thermal fracture stress for ceramic was 386±50 MPa, which is 64% higher than that of the crystals (235±16 MPa).

High efficiency and high peak power picosecond mid-infrared optical parametric amplifier based on BaGa4Se7 crystal.

A high efficiency and high peak power picosecond (ps) mid-infrared optical parametric amplifier with a new nonlinear crystal BaGa(4)Se(7) pumped by a 30 ps 1064 nm Nd:YAG laser is demonstrated for the first time. The maximum photon conversion efficiency of 56% from 1064 nm to 3.9 µm idler has been achieved at the pump energy of ~1.8 mJ. A maximum idler output of 830 µJ at 3.9 µm with peak power of ~27 MW was obtained at pump energy of ~9.1 mJ. Moreover, a 3-5 µm idler tuning range was demonstrated, with output energies of ~300 µJ at 5 µm and up to 1 mJ at 3 µm at ~8.2 mJ pump energy.