Single extracellular vesicle surface protein-based blood assay identifies potential biomarkers for detection and screening of five cancers.

Extracellular vesicles (EVs) and EV proteins are promising biomarkers for cancer liquid biopsy. Herein, we designed a case-control study involving 100 controls and 100 patients with esophageal, stomach, colorectal, liver, or lung cancer to identify common and type-specific biomarkers of plasma-derived EV surface proteins for the five cancers. EV surface proteins were profiled using a sequencing-based proximity barcoding assay. In this study, five differentially expressed proteins (DEPs) and eight differentially expressed protein combinations (DEPCs) showed promising performance (area under curve, AUC > 0.900) in pan-cancer identification [e.g., TENM2 (AUC = 0.982), CD36 (AUC = 0.974), and CD36-ITGA1 (AUC = 0.971)]. Our classification model could properly discriminate between cancer patients and controls using DEPs (AUC = 0.981) or DEPCs (AUC = 0.965). When distinguishing one cancer from the other four, the accuracy of the classification model using DEPCs (85-92%) was higher than that using DEPs (78-84%). We validated the performance in an additional 14 cancer patients and 14 controls, and achieved an AUC value of 0.786 for DEPs and 0.622 for DEPCs, highlighting the necessity to recruit a larger cohort for further validation. When clustering EVs into subpopulations, we detected cluster-specific proteins highly expressed in immune-related tissues. In the context of colorectal cancer, we identified heterogeneous EV clusters enriched in cancer patients, correlating with tumor initiation and progression. These findings provide epidemiological and molecular evidence for the clinical application of EV proteins in cancer prediction, while also illuminating their functional roles in cancer physiopathology.

Achieving High Strength and High Conductivity of Cu-6 wt%Ag Sheets by Controlling the Aging Cooling Rate.

In this paper, Cu-6 wt%Ag alloy sheets were prepared using vacuum induction melting, heat treatment, and cold working rolling. We investigated the influence of the aging cooling rate on the microstructure and properties of Cu-6 wt%Ag alloy sheets. By reducing the cooling rate of the aging treatment, the mechanical properties of the cold-rolled Cu-6 wt%Ag alloy sheets were improved. The cold-rolled Cu-6 wt%Ag alloy sheet achieves a tensile strength of 1003 MPa and an electrical conductivity of 75% IACS (International Annealing Copper Standard), which is superior to the alloy fabricated with other methods. SEM characterization shows that the change in properties of the Cu-6 wt%Ag alloy sheets with the same deformation is due to a precipitation of the nano-Ag phase. The high-performance Cu-Ag sheets are expected to be used as Bitter disks for water-cooled high-field magnets.

The gut microbiome in subclinical atherosclerosis: a population-based multiphenotype analysis.

OBJECTIVES: An altered microbiota, which can be described quantitatively, has been identified as playing a pivotal role in host vascular physiology, and it may contribute to various diseases. The aim of this study was to better understand the role of the gut microbiota in vascular physiology in a subclinical elderly population, and to investigate how lifestyle affects the composition of host gut microbiota to further impact the pathogenesis of vascular diseases. METHODS: We performed a population-based faecal metagenomic study over 569 elderly asymptomatic subclinical individuals in rural China. An association network was built based on clinical measurements and detailed epidemiologic questionnaires, including blood chemistry, arterial stiffness, carotid ultrasonography, and metagenomic datasets. RESULTS: By analyzing the breadth, depth and impact of each node of the association network, we found carotid arterial atherosclerosis indices, including intima-media thickness (IMT), were essential in the network, and were significantly associated with living habits, socio-economic status, and diet. Using mediation analysis, we found that higher frequency of eating fresh fruits and vegetables, and more exercise significantly reduced carotid atherosclerosis in terms of IMT, peak systolic velocity and end-diastolic velocity values through the mediation of Alistepes, Oligella and Prevotella. Gut microbes explained 16.5% of the mediation effect of lifestyle on the pathogenesis of carotid atherosclerosis. After adjustment, Faecalicatena [odds ratio (OR) = 0.12 ∼0.65] was shown to be protective against the formation of carotid atherosclerosis, independently, while Libanicoccus (OR = 1.46 ∼4.20 ) was associated with increased carotid arterial IMT. KEGG/KO Kyoto Encyclopedia of Genes and Genomes/ KEGG Orthology (KEGG/KO) analyses revealed a loss of anti-inflammation function in IMT subjects. CONCLUSION: Our study revealed a Chinese population-wide phenotype-metagenomic association network and a mediation effect of gut microbiota on carotid artery atherosclerosis, hinting at potential therapeutic and preventive uses for microbiota in vascular diseases.

The Application of Stimuli-Sensitive Actuators Based on Graphene Materials.

Graphene-based materials that can spontaneously response to external stimulations have triggered rapidly increasing research interest for developing smart devices due to their excellent electrical, mechanical and thermal properties. The specific behaviors as bending, curling, and swing are benefit for designing and fabricating the smart actuation system. In this minireview, we overview and summarize some of the recent advancements of stimuli-responsive actuators based on graphene materials. The external stimulus usually is as electrical, electrochemical, humid, photonic, and thermal. The advancement and industrialization of graphene preparation technology would push forward the rapid progress of graphene-based actuators and broaden their application including smart sensors, robots, artificial muscles, intelligent switch, and so on.

Electric Power Generation through the Direct Interaction of Pristine Graphene-Oxide with Water Molecules.

Converting ubiquitous environmental energy into electric power holds tremendous social and financial interests. Traditional energy harvesters and converters are limited by the specific materials and complex configuration of devices. Herein, it is presented that electric power can be directly produced from pristine graphene oxide (GO) without any pretreatment or additives once encountering the water vapor, which will generate an open-circuit-voltage of up to 0.4-0.7 V and a short-circuit-current-density of 2-25 µA cm-2 on a single piece of GO film. This phenomenon results from the directional movement of charged hydrogen ions through the GO film. The present work demonstrates and provides an extremely simple method for electric energy generation, which offers more applications of graphene-based materials in green energy converting field.

One Single Graphene Oxide Film for Responsive Actuation.

Graphene, because of its superior electrical/thermal conductivity, high surface area, excellent mechanical flexibility, and stability, is currently receiving significant attention and benefit to fabricate actuator devices. Here, a sole graphene oxide (GO) film responsive actuator with an integrated self-detecting sensor has been developed. The film exhibits an asymmetric surface structure on its two sides, creating a promising actuation ability triggered by multistimuli, such as moisture, thermals, and infrared light. Meanwhile, the built-in laser-writing reduced graphene oxide (rGO) sensor in the film can detect its own deformation in real time. Smart perceptual fingers in addition to rectangular-shaped and even four-legged walking robots have been developed based on the responsive GO film.

Scalable Preparation of Multifunctional Fire-Retardant Ultralight Graphene Foams.

Traditional flame-retardant materials often show poor tolerance to oxidants, strong acidic/alkaline reagents, organic solvents, along with toxicity problems. Herein, highly fire-retardant ultralight graphene foam has been developed, which possesses not only ultralight and compressible characteristics but also efficient flame-retardant properties, outperforming those traditional polymer, metallic oxide, and metal hydroxide based flame retardant materials and their composites. The newly developed unconventional refractory materials are promising for specific applications as demonstrated by the observed high temperature resistant microwave absorption capability.

Re-shaping graphene hydrogels for effectively enhancing actuation responses.

The development of actuation-enabled materials is important for smart devices and systems. Among them, graphene with outstanding electric, thermal, and mechanical properties holds great promise as a new type of stimuli-responsive material. In this study, we developed a re-shaping strategy to construct structure-controlled graphene hydrogels for highly enhanced actuation responses. Actuators based on the re-shaped graphene hydrogel showed a much higher actuation response than that of the common graphene counterparts. On the other hand, once composited with a conducting polymer (e.g., polypyrrole), the re-shaped hybrid actuator exhibits excellent actuation behavior in response to electrochemical potential variation. Even under stimulation at a voltage as low as 0.8 V, actuators based on the re-shaped graphene-polypyrrole composite hydrogel exhibit a maximum strain response of up to 13.5%, which is the highest value reported to date for graphene-based materials.

An all-cotton-derived, arbitrarily foldable, high-rate, electrochemical supercapacitor.

The pure natural cotton provides a low-cost material platform for the facile assembly of all-cotton-derived electrochemical supercapacitors (allC-ECs) with a remarkable character of arbitrary foldability and high response rate, which can be bent, rolled-up, and fully folded without loss of high-rate (<50 ms) capacitive performance.

Large-scale spinning assembly of neat, morphology-defined, graphene-based hollow fibers.

Large-scale assembly of graphenes in a well-controlled macroscopic fashion is important for practical applications. We have developed a facile and straightforward approach for continuous fabrication of neat, morphology-defined, graphene-based hollow fibers (HFs) via a coaxial two-capillary spinning strategy. With a high throughput, HFs and necklace-like HFs of graphene oxide have been well-controlled produced with the ease of functionalization and conversion to graphene HFs via simply thermal or chemical reduction. This work paves the way toward the mass production of graphene-based HFs with desirable functionalities and morphologies for many of important applications in fluidics, catalysis, purification, separation, and sensing.

[Time-series analysis of ambient PM10 pollution on residential mortality in Beijing].

OBJECTIVE: To explore the short-term impact of ambient PM(10) on daily non-accidental death, cardiovascular and respiratory death of residents in Beijing. METHODS: Mortality data of residents in Beijing during 2006 to 2009 were obtained from public health surveillance and information service center of Chinese Center for Disease Control and Prevention, contemporaneous data of average daily air concentration of PM(10), SO(2), NO(2) were obtained from Beijing Environment Protection Bureau (year 2005 - 2006) and public website of Beijing environmental protection (year 2007 - 2009), respectively, contemporaneous meteorological data were obtained from china meteorological data sharing service system. Generalized addictive model (GAM) of time serial analysis was applied. In additional to the control of confounding factors such as long-term trend, day of the week effect, meteorological factors, lag effect and the effects of other atmospheric pollutants were also analyzed. RESULTS: During year 2006 to 2009, the number of average daily non-accidental death, respiratory disease caused death, cardiovascular and cerebrovascular diseases caused death among Beijing residents were 140.1, 15.0, 65.8, respectively;contemporaneous medians of average daily air concentration of PM(10), SO(2), NO(2) were 123.0, 26.0, 58.0 µg/m(3), respectively;contemporaneous average atmosphere pressure, temperature and relative humidity were 10.1 kPa, 13.5°C and 51.9%, respectively. An exposure-response relationship between exposure to ambient PM(10) and increased daily death number was found as every 10 µg/m(3) increase in daily average concentration of PM(10), there was a 0.1267% (95%CI: 0.0824% - 0.1710%) increase in daily non-accidental death of residents, 0.1365% (95%CI: 0.0010% - 0.2720%) increase in respiratory death and 0.1239% (95%CI: 0.0589% - 0.1889%) increase in cardiovascular death. Ambient PM(10) had greatest influence on daily non-accidental and cardiovascular death of the same day, while its greatest influence on respiratory death occurred 5 days later. CONCLUSION: The ambient PM(10) pollution increased daily non-accidental, respiratory disease caused, cardiovascular and cerebrovascular diseases caused deaths among residents in Beijing, and lag effect existed as for the effect of ambient PM(10) pollution on respiratory disease caused death.